mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 02:46:55 +07:00
6658356014
Add Hardkernel Odroid XU4 board Device Tree sources. The board differs from Odroid XU3 and XU3-Lite by: 1. No green and red LEDs (except standard red power LED). 2. Only two PWM outputs are used (fan and blue LED) 3. No audio codec. 4. Two USB3 ports in host mode (no micro USB3 connector for OTG). 5. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). 6. Additional connector with IO ports (I2S_0, I2C_5). 7. No DisplayPort (like XU3-Lite). 8. No TI INA231 power measurement sensors (like XU3-Lite). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
103 lines
1.9 KiB
Plaintext
103 lines
1.9 KiB
Plaintext
/*
|
|
* Hardkernel Odroid XU3 board device tree source
|
|
*
|
|
* Copyright (c) 2014 Collabora Ltd.
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos5422-odroidxu3-common.dtsi"
|
|
#include "exynos5422-odroidxu3-audio.dtsi"
|
|
|
|
/ {
|
|
model = "Hardkernel Odroid XU3";
|
|
compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
|
|
|
|
pwmleds {
|
|
compatible = "pwm-leds";
|
|
|
|
greenled {
|
|
label = "green:mmc0";
|
|
pwms = <&pwm 1 2000000 0>;
|
|
pwm-names = "pwm1";
|
|
/*
|
|
* Green LED is much brighter than the others
|
|
* so limit its max brightness
|
|
*/
|
|
max_brightness = <127>;
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
|
|
blueled {
|
|
label = "blue:heartbeat";
|
|
pwms = <&pwm 2 2000000 0>;
|
|
pwm-names = "pwm2";
|
|
max_brightness = <255>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
gpioleds {
|
|
compatible = "gpio-leds";
|
|
redled {
|
|
label = "red:microSD";
|
|
gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
linux,default-trigger = "mmc1";
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c_0 {
|
|
status = "okay";
|
|
|
|
/* A15 cluster: VDD_ARM */
|
|
ina231@40 {
|
|
compatible = "ti,ina231";
|
|
reg = <0x40>;
|
|
shunt-resistor = <10000>;
|
|
};
|
|
|
|
/* memory: VDD_MEM */
|
|
ina231@41 {
|
|
compatible = "ti,ina231";
|
|
reg = <0x41>;
|
|
shunt-resistor = <10000>;
|
|
};
|
|
|
|
/* GPU: VDD_G3D */
|
|
ina231@44 {
|
|
compatible = "ti,ina231";
|
|
reg = <0x44>;
|
|
shunt-resistor = <10000>;
|
|
};
|
|
|
|
/* A7 cluster: VDD_KFC */
|
|
ina231@45 {
|
|
compatible = "ti,ina231";
|
|
reg = <0x45>;
|
|
shunt-resistor = <10000>;
|
|
};
|
|
};
|
|
|
|
&pwm {
|
|
/*
|
|
* PWM 0 -- fan
|
|
* PWM 1 -- Green LED
|
|
* PWM 2 -- Blue LED
|
|
* PWM 3 -- on MIPI connector for backlight
|
|
*/
|
|
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
dr_mode = "otg";
|
|
};
|