linux_dsm_epyc7002/drivers/net/wireless/ath/ath9k
Mohammed Shafi Shajakhan 0e44d48cbb ath9k_hw: make sure PAPRD training is properly done
checking the status of PAPRD_AGC2_POWER(Log(ADC_power) measured after
last gain-change in dB) field suggests whether the PAPRD is completely/properly
done. This is an additional check apart from polling for PAPRD done bit being set.
        Susinder suggests that the ideal power range value should be
0xf0 to 0xfe. With AR9382 we do have the values in this range. to have a
common check for all platforms we take agc2_power should be atleast greater
than 0xe0

Cc: susinder@qca.qualcomm.com
Cc: senthilb@qca.qualcomm.com
Cc: kmuthusa@qca.qualcomm.com
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-20 15:34:18 -04:00
..
ahb.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ani.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ani.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar5008_initvals.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar5008_phy.c Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem 2011-05-24 16:47:54 -04:00
ar9001_initvals.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9002_calib.c ath9k: Fix AR9287 calibration 2011-05-27 12:53:48 -04:00
ar9002_hw.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9002_initvals.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9002_mac.c ath9k_hw: remove ath9k_hw_get_desc_link 2011-06-01 15:11:00 -04:00
ar9002_phy.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9002_phy.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9003_2p2_initvals.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9003_calib.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9003_eeprom.c ath9k: Fix a corner case failure in sending PAPRD frames in HT40 2011-06-20 15:34:18 -04:00
ar9003_eeprom.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9003_hw.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9003_mac.c ath9k_hw: remove ath9k_hw_get_desc_link 2011-06-01 15:11:00 -04:00
ar9003_mac.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9003_paprd.c ath9k_hw: make sure PAPRD training is properly done 2011-06-20 15:34:18 -04:00
ar9003_phy.c ath9k_hw: disable phy restart on baseband panic caused by RXSM 2011-05-26 15:43:31 -04:00
ar9003_phy.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ar9340_initvals.h ath9k_hw: Add initvals.h for ar9340 2011-04-25 14:50:09 -04:00
ar9485_initvals.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
ath9k.h ath9k: typo fix in a comment 2011-06-17 14:22:25 -04:00
beacon.c ath9k: Further fix for mesh beaconing 2011-06-01 15:36:28 -04:00
btcoex.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
btcoex.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
calib.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
calib.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
common.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
common.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
debug.c ath9k: show excessive-retry MPDUs in debugfs 2011-06-03 15:01:07 -04:00
debug.h ath9k: show excessive-retry MPDUs in debugfs 2011-06-03 15:01:07 -04:00
eeprom_4k.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
eeprom_9287.c ath9k: fix two more bugs in tx power 2011-06-01 14:35:54 -04:00
eeprom_def.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
eeprom.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
eeprom.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
gpio.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
hif_usb.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
hif_usb.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
htc_drv_beacon.c ath9k: Remove ATH9K_BEACON_PERIOD mask 2011-06-01 15:12:28 -04:00
htc_drv_debug.c ath9k_htc: Dump modal eeprom header for UB91/94/95 2011-04-29 15:36:13 -04:00
htc_drv_gpio.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
htc_drv_init.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
htc_drv_main.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
htc_drv_txrx.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
htc_hst.c Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem 2011-05-24 16:47:54 -04:00
htc_hst.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
htc.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
hw-ops.h ath9k_hw: remove ath9k_hw_get_desc_link 2011-06-01 15:11:00 -04:00
hw.c ath9k: Remove ATH9K_BEACON_PERIOD mask 2011-06-01 15:12:28 -04:00
hw.h ath9k_hw: make sure PAPRD training is properly done 2011-06-20 15:34:18 -04:00
init.c ath9k: Add a debug entry to start/stop ANI 2011-06-01 15:36:29 -04:00
Kconfig wireless: Default to 'n' for 2 new added devices in Kconfig. 2011-05-27 12:53:46 -04:00
mac.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
mac.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
main.c ath9k: remove a redundant call to pcipowersave 2011-06-17 14:22:24 -04:00
Makefile ath9k_htc: Move debug code to a separate file 2011-04-13 15:22:37 -04:00
pci.c Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem 2011-05-24 16:47:54 -04:00
phy.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
rc.c ath9k: use standard max(), remove A_MAX macro 2011-06-17 14:22:25 -04:00
rc.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
recv.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
reg.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
wmi.c ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
wmi.h ath9k: Drag the driver to the year 2011 2011-05-19 13:54:05 -04:00
xmit.c ath9k: unify edma and non-edma tx code, improve tx fifo handling 2011-06-01 15:11:00 -04:00