linux_dsm_epyc7002/fs/ubifs/journal.c
Sheng Yong 235c362bd0 UBIFS: extend debug/message capabilities
In the case where we have more than one volumes on different UBI
devices, it may be not that easy to tell which volume prints the
messages.  Add ubi number and volume id in ubifs_msg/warn/error
to help debug. These two values are passed by struct ubifs_info.

For those where ubifs_info is not initialized yet, ubifs_* is
replaced by pr_*. For those where ubifs_info is not avaliable,
ubifs_info is passed to the calling function as a const parameter.

The output looks like,

[   95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696
[   95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1"
[   95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
[   95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB)
[   95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model
[   95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699
[   95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2"
[   95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[   95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB)
[   95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model

[  954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6)
[  954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-25 11:08:41 +02:00

1467 lines
42 KiB
C

/*
* This file is part of UBIFS.
*
* Copyright (C) 2006-2008 Nokia Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 51
* Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Authors: Artem Bityutskiy (Битюцкий Артём)
* Adrian Hunter
*/
/*
* This file implements UBIFS journal.
*
* The journal consists of 2 parts - the log and bud LEBs. The log has fixed
* length and position, while a bud logical eraseblock is any LEB in the main
* area. Buds contain file system data - data nodes, inode nodes, etc. The log
* contains only references to buds and some other stuff like commit
* start node. The idea is that when we commit the journal, we do
* not copy the data, the buds just become indexed. Since after the commit the
* nodes in bud eraseblocks become leaf nodes of the file system index tree, we
* use term "bud". Analogy is obvious, bud eraseblocks contain nodes which will
* become leafs in the future.
*
* The journal is multi-headed because we want to write data to the journal as
* optimally as possible. It is nice to have nodes belonging to the same inode
* in one LEB, so we may write data owned by different inodes to different
* journal heads, although at present only one data head is used.
*
* For recovery reasons, the base head contains all inode nodes, all directory
* entry nodes and all truncate nodes. This means that the other heads contain
* only data nodes.
*
* Bud LEBs may be half-indexed. For example, if the bud was not full at the
* time of commit, the bud is retained to continue to be used in the journal,
* even though the "front" of the LEB is now indexed. In that case, the log
* reference contains the offset where the bud starts for the purposes of the
* journal.
*
* The journal size has to be limited, because the larger is the journal, the
* longer it takes to mount UBIFS (scanning the journal) and the more memory it
* takes (indexing in the TNC).
*
* All the journal write operations like 'ubifs_jnl_update()' here, which write
* multiple UBIFS nodes to the journal at one go, are atomic with respect to
* unclean reboots. Should the unclean reboot happen, the recovery code drops
* all the nodes.
*/
#include "ubifs.h"
/**
* zero_ino_node_unused - zero out unused fields of an on-flash inode node.
* @ino: the inode to zero out
*/
static inline void zero_ino_node_unused(struct ubifs_ino_node *ino)
{
memset(ino->padding1, 0, 4);
memset(ino->padding2, 0, 26);
}
/**
* zero_dent_node_unused - zero out unused fields of an on-flash directory
* entry node.
* @dent: the directory entry to zero out
*/
static inline void zero_dent_node_unused(struct ubifs_dent_node *dent)
{
dent->padding1 = 0;
memset(dent->padding2, 0, 4);
}
/**
* zero_data_node_unused - zero out unused fields of an on-flash data node.
* @data: the data node to zero out
*/
static inline void zero_data_node_unused(struct ubifs_data_node *data)
{
memset(data->padding, 0, 2);
}
/**
* zero_trun_node_unused - zero out unused fields of an on-flash truncation
* node.
* @trun: the truncation node to zero out
*/
static inline void zero_trun_node_unused(struct ubifs_trun_node *trun)
{
memset(trun->padding, 0, 12);
}
/**
* reserve_space - reserve space in the journal.
* @c: UBIFS file-system description object
* @jhead: journal head number
* @len: node length
*
* This function reserves space in journal head @head. If the reservation
* succeeded, the journal head stays locked and later has to be unlocked using
* 'release_head()'. 'write_node()' and 'write_head()' functions also unlock
* it. Returns zero in case of success, %-EAGAIN if commit has to be done, and
* other negative error codes in case of other failures.
*/
static int reserve_space(struct ubifs_info *c, int jhead, int len)
{
int err = 0, err1, retries = 0, avail, lnum, offs, squeeze;
struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf;
/*
* Typically, the base head has smaller nodes written to it, so it is
* better to try to allocate space at the ends of eraseblocks. This is
* what the squeeze parameter does.
*/
ubifs_assert(!c->ro_media && !c->ro_mount);
squeeze = (jhead == BASEHD);
again:
mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
if (c->ro_error) {
err = -EROFS;
goto out_unlock;
}
avail = c->leb_size - wbuf->offs - wbuf->used;
if (wbuf->lnum != -1 && avail >= len)
return 0;
/*
* Write buffer wasn't seek'ed or there is no enough space - look for an
* LEB with some empty space.
*/
lnum = ubifs_find_free_space(c, len, &offs, squeeze);
if (lnum >= 0)
goto out;
err = lnum;
if (err != -ENOSPC)
goto out_unlock;
/*
* No free space, we have to run garbage collector to make
* some. But the write-buffer mutex has to be unlocked because
* GC also takes it.
*/
dbg_jnl("no free space in jhead %s, run GC", dbg_jhead(jhead));
mutex_unlock(&wbuf->io_mutex);
lnum = ubifs_garbage_collect(c, 0);
if (lnum < 0) {
err = lnum;
if (err != -ENOSPC)
return err;
/*
* GC could not make a free LEB. But someone else may
* have allocated new bud for this journal head,
* because we dropped @wbuf->io_mutex, so try once
* again.
*/
dbg_jnl("GC couldn't make a free LEB for jhead %s",
dbg_jhead(jhead));
if (retries++ < 2) {
dbg_jnl("retry (%d)", retries);
goto again;
}
dbg_jnl("return -ENOSPC");
return err;
}
mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
dbg_jnl("got LEB %d for jhead %s", lnum, dbg_jhead(jhead));
avail = c->leb_size - wbuf->offs - wbuf->used;
if (wbuf->lnum != -1 && avail >= len) {
/*
* Someone else has switched the journal head and we have
* enough space now. This happens when more than one process is
* trying to write to the same journal head at the same time.
*/
dbg_jnl("return LEB %d back, already have LEB %d:%d",
lnum, wbuf->lnum, wbuf->offs + wbuf->used);
err = ubifs_return_leb(c, lnum);
if (err)
goto out_unlock;
return 0;
}
offs = 0;
out:
/*
* Make sure we synchronize the write-buffer before we add the new bud
* to the log. Otherwise we may have a power cut after the log
* reference node for the last bud (@lnum) is written but before the
* write-buffer data are written to the next-to-last bud
* (@wbuf->lnum). And the effect would be that the recovery would see
* that there is corruption in the next-to-last bud.
*/
err = ubifs_wbuf_sync_nolock(wbuf);
if (err)
goto out_return;
err = ubifs_add_bud_to_log(c, jhead, lnum, offs);
if (err)
goto out_return;
err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs);
if (err)
goto out_unlock;
return 0;
out_unlock:
mutex_unlock(&wbuf->io_mutex);
return err;
out_return:
/* An error occurred and the LEB has to be returned to lprops */
ubifs_assert(err < 0);
err1 = ubifs_return_leb(c, lnum);
if (err1 && err == -EAGAIN)
/*
* Return original error code only if it is not %-EAGAIN,
* which is not really an error. Otherwise, return the error
* code of 'ubifs_return_leb()'.
*/
err = err1;
mutex_unlock(&wbuf->io_mutex);
return err;
}
/**
* write_node - write node to a journal head.
* @c: UBIFS file-system description object
* @jhead: journal head
* @node: node to write
* @len: node length
* @lnum: LEB number written is returned here
* @offs: offset written is returned here
*
* This function writes a node to reserved space of journal head @jhead.
* Returns zero in case of success and a negative error code in case of
* failure.
*/
static int write_node(struct ubifs_info *c, int jhead, void *node, int len,
int *lnum, int *offs)
{
struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf;
ubifs_assert(jhead != GCHD);
*lnum = c->jheads[jhead].wbuf.lnum;
*offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used;
dbg_jnl("jhead %s, LEB %d:%d, len %d",
dbg_jhead(jhead), *lnum, *offs, len);
ubifs_prepare_node(c, node, len, 0);
return ubifs_wbuf_write_nolock(wbuf, node, len);
}
/**
* write_head - write data to a journal head.
* @c: UBIFS file-system description object
* @jhead: journal head
* @buf: buffer to write
* @len: length to write
* @lnum: LEB number written is returned here
* @offs: offset written is returned here
* @sync: non-zero if the write-buffer has to by synchronized
*
* This function is the same as 'write_node()' but it does not assume the
* buffer it is writing is a node, so it does not prepare it (which means
* initializing common header and calculating CRC).
*/
static int write_head(struct ubifs_info *c, int jhead, void *buf, int len,
int *lnum, int *offs, int sync)
{
int err;
struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf;
ubifs_assert(jhead != GCHD);
*lnum = c->jheads[jhead].wbuf.lnum;
*offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used;
dbg_jnl("jhead %s, LEB %d:%d, len %d",
dbg_jhead(jhead), *lnum, *offs, len);
err = ubifs_wbuf_write_nolock(wbuf, buf, len);
if (err)
return err;
if (sync)
err = ubifs_wbuf_sync_nolock(wbuf);
return err;
}
/**
* make_reservation - reserve journal space.
* @c: UBIFS file-system description object
* @jhead: journal head
* @len: how many bytes to reserve
*
* This function makes space reservation in journal head @jhead. The function
* takes the commit lock and locks the journal head, and the caller has to
* unlock the head and finish the reservation with 'finish_reservation()'.
* Returns zero in case of success and a negative error code in case of
* failure.
*
* Note, the journal head may be unlocked as soon as the data is written, while
* the commit lock has to be released after the data has been added to the
* TNC.
*/
static int make_reservation(struct ubifs_info *c, int jhead, int len)
{
int err, cmt_retries = 0, nospc_retries = 0;
again:
down_read(&c->commit_sem);
err = reserve_space(c, jhead, len);
if (!err)
return 0;
up_read(&c->commit_sem);
if (err == -ENOSPC) {
/*
* GC could not make any progress. We should try to commit
* once because it could make some dirty space and GC would
* make progress, so make the error -EAGAIN so that the below
* will commit and re-try.
*/
if (nospc_retries++ < 2) {
dbg_jnl("no space, retry");
err = -EAGAIN;
}
/*
* This means that the budgeting is incorrect. We always have
* to be able to write to the media, because all operations are
* budgeted. Deletions are not budgeted, though, but we reserve
* an extra LEB for them.
*/
}
if (err != -EAGAIN)
goto out;
/*
* -EAGAIN means that the journal is full or too large, or the above
* code wants to do one commit. Do this and re-try.
*/
if (cmt_retries > 128) {
/*
* This should not happen unless the journal size limitations
* are too tough.
*/
ubifs_err(c, "stuck in space allocation");
err = -ENOSPC;
goto out;
} else if (cmt_retries > 32)
ubifs_warn(c, "too many space allocation re-tries (%d)",
cmt_retries);
dbg_jnl("-EAGAIN, commit and retry (retried %d times)",
cmt_retries);
cmt_retries += 1;
err = ubifs_run_commit(c);
if (err)
return err;
goto again;
out:
ubifs_err(c, "cannot reserve %d bytes in jhead %d, error %d",
len, jhead, err);
if (err == -ENOSPC) {
/* This are some budgeting problems, print useful information */
down_write(&c->commit_sem);
dump_stack();
ubifs_dump_budg(c, &c->bi);
ubifs_dump_lprops(c);
cmt_retries = dbg_check_lprops(c);
up_write(&c->commit_sem);
}
return err;
}
/**
* release_head - release a journal head.
* @c: UBIFS file-system description object
* @jhead: journal head
*
* This function releases journal head @jhead which was locked by
* the 'make_reservation()' function. It has to be called after each successful
* 'make_reservation()' invocation.
*/
static inline void release_head(struct ubifs_info *c, int jhead)
{
mutex_unlock(&c->jheads[jhead].wbuf.io_mutex);
}
/**
* finish_reservation - finish a reservation.
* @c: UBIFS file-system description object
*
* This function finishes journal space reservation. It must be called after
* 'make_reservation()'.
*/
static void finish_reservation(struct ubifs_info *c)
{
up_read(&c->commit_sem);
}
/**
* get_dent_type - translate VFS inode mode to UBIFS directory entry type.
* @mode: inode mode
*/
static int get_dent_type(int mode)
{
switch (mode & S_IFMT) {
case S_IFREG:
return UBIFS_ITYPE_REG;
case S_IFDIR:
return UBIFS_ITYPE_DIR;
case S_IFLNK:
return UBIFS_ITYPE_LNK;
case S_IFBLK:
return UBIFS_ITYPE_BLK;
case S_IFCHR:
return UBIFS_ITYPE_CHR;
case S_IFIFO:
return UBIFS_ITYPE_FIFO;
case S_IFSOCK:
return UBIFS_ITYPE_SOCK;
default:
BUG();
}
return 0;
}
/**
* pack_inode - pack an inode node.
* @c: UBIFS file-system description object
* @ino: buffer in which to pack inode node
* @inode: inode to pack
* @last: indicates the last node of the group
*/
static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino,
const struct inode *inode, int last)
{
int data_len = 0, last_reference = !inode->i_nlink;
struct ubifs_inode *ui = ubifs_inode(inode);
ino->ch.node_type = UBIFS_INO_NODE;
ino_key_init_flash(c, &ino->key, inode->i_ino);
ino->creat_sqnum = cpu_to_le64(ui->creat_sqnum);
ino->atime_sec = cpu_to_le64(inode->i_atime.tv_sec);
ino->atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec);
ino->ctime_sec = cpu_to_le64(inode->i_ctime.tv_sec);
ino->ctime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec);
ino->mtime_sec = cpu_to_le64(inode->i_mtime.tv_sec);
ino->mtime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
ino->uid = cpu_to_le32(i_uid_read(inode));
ino->gid = cpu_to_le32(i_gid_read(inode));
ino->mode = cpu_to_le32(inode->i_mode);
ino->flags = cpu_to_le32(ui->flags);
ino->size = cpu_to_le64(ui->ui_size);
ino->nlink = cpu_to_le32(inode->i_nlink);
ino->compr_type = cpu_to_le16(ui->compr_type);
ino->data_len = cpu_to_le32(ui->data_len);
ino->xattr_cnt = cpu_to_le32(ui->xattr_cnt);
ino->xattr_size = cpu_to_le32(ui->xattr_size);
ino->xattr_names = cpu_to_le32(ui->xattr_names);
zero_ino_node_unused(ino);
/*
* Drop the attached data if this is a deletion inode, the data is not
* needed anymore.
*/
if (!last_reference) {
memcpy(ino->data, ui->data, ui->data_len);
data_len = ui->data_len;
}
ubifs_prep_grp_node(c, ino, UBIFS_INO_NODE_SZ + data_len, last);
}
/**
* mark_inode_clean - mark UBIFS inode as clean.
* @c: UBIFS file-system description object
* @ui: UBIFS inode to mark as clean
*
* This helper function marks UBIFS inode @ui as clean by cleaning the
* @ui->dirty flag and releasing its budget. Note, VFS may still treat the
* inode as dirty and try to write it back, but 'ubifs_write_inode()' would
* just do nothing.
*/
static void mark_inode_clean(struct ubifs_info *c, struct ubifs_inode *ui)
{
if (ui->dirty)
ubifs_release_dirty_inode_budget(c, ui);
ui->dirty = 0;
}
/**
* ubifs_jnl_update - update inode.
* @c: UBIFS file-system description object
* @dir: parent inode or host inode in case of extended attributes
* @nm: directory entry name
* @inode: inode to update
* @deletion: indicates a directory entry deletion i.e unlink or rmdir
* @xent: non-zero if the directory entry is an extended attribute entry
*
* This function updates an inode by writing a directory entry (or extended
* attribute entry), the inode itself, and the parent directory inode (or the
* host inode) to the journal.
*
* The function writes the host inode @dir last, which is important in case of
* extended attributes. Indeed, then we guarantee that if the host inode gets
* synchronized (with 'fsync()'), and the write-buffer it sits in gets flushed,
* the extended attribute inode gets flushed too. And this is exactly what the
* user expects - synchronizing the host inode synchronizes its extended
* attributes. Similarly, this guarantees that if @dir is synchronized, its
* directory entry corresponding to @nm gets synchronized too.
*
* If the inode (@inode) or the parent directory (@dir) are synchronous, this
* function synchronizes the write-buffer.
*
* This function marks the @dir and @inode inodes as clean and returns zero on
* success. In case of failure, a negative error code is returned.
*/
int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir,
const struct qstr *nm, const struct inode *inode,
int deletion, int xent)
{
int err, dlen, ilen, len, lnum, ino_offs, dent_offs;
int aligned_dlen, aligned_ilen, sync = IS_DIRSYNC(dir);
int last_reference = !!(deletion && inode->i_nlink == 0);
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_inode *host_ui = ubifs_inode(dir);
struct ubifs_dent_node *dent;
struct ubifs_ino_node *ino;
union ubifs_key dent_key, ino_key;
dbg_jnl("ino %lu, dent '%.*s', data len %d in dir ino %lu",
inode->i_ino, nm->len, nm->name, ui->data_len, dir->i_ino);
ubifs_assert(mutex_is_locked(&host_ui->ui_mutex));
dlen = UBIFS_DENT_NODE_SZ + nm->len + 1;
ilen = UBIFS_INO_NODE_SZ;
/*
* If the last reference to the inode is being deleted, then there is
* no need to attach and write inode data, it is being deleted anyway.
* And if the inode is being deleted, no need to synchronize
* write-buffer even if the inode is synchronous.
*/
if (!last_reference) {
ilen += ui->data_len;
sync |= IS_SYNC(inode);
}
aligned_dlen = ALIGN(dlen, 8);
aligned_ilen = ALIGN(ilen, 8);
len = aligned_dlen + aligned_ilen + UBIFS_INO_NODE_SZ;
/* Make sure to also account for extended attributes */
len += host_ui->data_len;
dent = kmalloc(len, GFP_NOFS);
if (!dent)
return -ENOMEM;
/* Make reservation before allocating sequence numbers */
err = make_reservation(c, BASEHD, len);
if (err)
goto out_free;
if (!xent) {
dent->ch.node_type = UBIFS_DENT_NODE;
dent_key_init(c, &dent_key, dir->i_ino, nm);
} else {
dent->ch.node_type = UBIFS_XENT_NODE;
xent_key_init(c, &dent_key, dir->i_ino, nm);
}
key_write(c, &dent_key, dent->key);
dent->inum = deletion ? 0 : cpu_to_le64(inode->i_ino);
dent->type = get_dent_type(inode->i_mode);
dent->nlen = cpu_to_le16(nm->len);
memcpy(dent->name, nm->name, nm->len);
dent->name[nm->len] = '\0';
zero_dent_node_unused(dent);
ubifs_prep_grp_node(c, dent, dlen, 0);
ino = (void *)dent + aligned_dlen;
pack_inode(c, ino, inode, 0);
ino = (void *)ino + aligned_ilen;
pack_inode(c, ino, dir, 1);
if (last_reference) {
err = ubifs_add_orphan(c, inode->i_ino);
if (err) {
release_head(c, BASEHD);
goto out_finish;
}
ui->del_cmtno = c->cmt_no;
}
err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync);
if (err)
goto out_release;
if (!sync) {
struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf;
ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino);
ubifs_wbuf_add_ino_nolock(wbuf, dir->i_ino);
}
release_head(c, BASEHD);
kfree(dent);
if (deletion) {
err = ubifs_tnc_remove_nm(c, &dent_key, nm);
if (err)
goto out_ro;
err = ubifs_add_dirt(c, lnum, dlen);
} else
err = ubifs_tnc_add_nm(c, &dent_key, lnum, dent_offs, dlen, nm);
if (err)
goto out_ro;
/*
* Note, we do not remove the inode from TNC even if the last reference
* to it has just been deleted, because the inode may still be opened.
* Instead, the inode has been added to orphan lists and the orphan
* subsystem will take further care about it.
*/
ino_key_init(c, &ino_key, inode->i_ino);
ino_offs = dent_offs + aligned_dlen;
err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, ilen);
if (err)
goto out_ro;
ino_key_init(c, &ino_key, dir->i_ino);
ino_offs += aligned_ilen;
err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs,
UBIFS_INO_NODE_SZ + host_ui->data_len);
if (err)
goto out_ro;
finish_reservation(c);
spin_lock(&ui->ui_lock);
ui->synced_i_size = ui->ui_size;
spin_unlock(&ui->ui_lock);
mark_inode_clean(c, ui);
mark_inode_clean(c, host_ui);
return 0;
out_finish:
finish_reservation(c);
out_free:
kfree(dent);
return err;
out_release:
release_head(c, BASEHD);
kfree(dent);
out_ro:
ubifs_ro_mode(c, err);
if (last_reference)
ubifs_delete_orphan(c, inode->i_ino);
finish_reservation(c);
return err;
}
/**
* ubifs_jnl_write_data - write a data node to the journal.
* @c: UBIFS file-system description object
* @inode: inode the data node belongs to
* @key: node key
* @buf: buffer to write
* @len: data length (must not exceed %UBIFS_BLOCK_SIZE)
*
* This function writes a data node to the journal. Returns %0 if the data node
* was successfully written, and a negative error code in case of failure.
*/
int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode,
const union ubifs_key *key, const void *buf, int len)
{
struct ubifs_data_node *data;
int err, lnum, offs, compr_type, out_len;
int dlen = COMPRESSED_DATA_NODE_BUF_SZ, allocated = 1;
struct ubifs_inode *ui = ubifs_inode(inode);
dbg_jnlk(key, "ino %lu, blk %u, len %d, key ",
(unsigned long)key_inum(c, key), key_block(c, key), len);
ubifs_assert(len <= UBIFS_BLOCK_SIZE);
data = kmalloc(dlen, GFP_NOFS | __GFP_NOWARN);
if (!data) {
/*
* Fall-back to the write reserve buffer. Note, we might be
* currently on the memory reclaim path, when the kernel is
* trying to free some memory by writing out dirty pages. The
* write reserve buffer helps us to guarantee that we are
* always able to write the data.
*/
allocated = 0;
mutex_lock(&c->write_reserve_mutex);
data = c->write_reserve_buf;
}
data->ch.node_type = UBIFS_DATA_NODE;
key_write(c, key, &data->key);
data->size = cpu_to_le32(len);
zero_data_node_unused(data);
if (!(ui->flags & UBIFS_COMPR_FL))
/* Compression is disabled for this inode */
compr_type = UBIFS_COMPR_NONE;
else
compr_type = ui->compr_type;
out_len = dlen - UBIFS_DATA_NODE_SZ;
ubifs_compress(c, buf, len, &data->data, &out_len, &compr_type);
ubifs_assert(out_len <= UBIFS_BLOCK_SIZE);
dlen = UBIFS_DATA_NODE_SZ + out_len;
data->compr_type = cpu_to_le16(compr_type);
/* Make reservation before allocating sequence numbers */
err = make_reservation(c, DATAHD, dlen);
if (err)
goto out_free;
err = write_node(c, DATAHD, data, dlen, &lnum, &offs);
if (err)
goto out_release;
ubifs_wbuf_add_ino_nolock(&c->jheads[DATAHD].wbuf, key_inum(c, key));
release_head(c, DATAHD);
err = ubifs_tnc_add(c, key, lnum, offs, dlen);
if (err)
goto out_ro;
finish_reservation(c);
if (!allocated)
mutex_unlock(&c->write_reserve_mutex);
else
kfree(data);
return 0;
out_release:
release_head(c, DATAHD);
out_ro:
ubifs_ro_mode(c, err);
finish_reservation(c);
out_free:
if (!allocated)
mutex_unlock(&c->write_reserve_mutex);
else
kfree(data);
return err;
}
/**
* ubifs_jnl_write_inode - flush inode to the journal.
* @c: UBIFS file-system description object
* @inode: inode to flush
*
* This function writes inode @inode to the journal. If the inode is
* synchronous, it also synchronizes the write-buffer. Returns zero in case of
* success and a negative error code in case of failure.
*/
int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
{
int err, lnum, offs;
struct ubifs_ino_node *ino;
struct ubifs_inode *ui = ubifs_inode(inode);
int sync = 0, len = UBIFS_INO_NODE_SZ, last_reference = !inode->i_nlink;
dbg_jnl("ino %lu, nlink %u", inode->i_ino, inode->i_nlink);
/*
* If the inode is being deleted, do not write the attached data. No
* need to synchronize the write-buffer either.
*/
if (!last_reference) {
len += ui->data_len;
sync = IS_SYNC(inode);
}
ino = kmalloc(len, GFP_NOFS);
if (!ino)
return -ENOMEM;
/* Make reservation before allocating sequence numbers */
err = make_reservation(c, BASEHD, len);
if (err)
goto out_free;
pack_inode(c, ino, inode, 1);
err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync);
if (err)
goto out_release;
if (!sync)
ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf,
inode->i_ino);
release_head(c, BASEHD);
if (last_reference) {
err = ubifs_tnc_remove_ino(c, inode->i_ino);
if (err)
goto out_ro;
ubifs_delete_orphan(c, inode->i_ino);
err = ubifs_add_dirt(c, lnum, len);
} else {
union ubifs_key key;
ino_key_init(c, &key, inode->i_ino);
err = ubifs_tnc_add(c, &key, lnum, offs, len);
}
if (err)
goto out_ro;
finish_reservation(c);
spin_lock(&ui->ui_lock);
ui->synced_i_size = ui->ui_size;
spin_unlock(&ui->ui_lock);
kfree(ino);
return 0;
out_release:
release_head(c, BASEHD);
out_ro:
ubifs_ro_mode(c, err);
finish_reservation(c);
out_free:
kfree(ino);
return err;
}
/**
* ubifs_jnl_delete_inode - delete an inode.
* @c: UBIFS file-system description object
* @inode: inode to delete
*
* This function deletes inode @inode which includes removing it from orphans,
* deleting it from TNC and, in some cases, writing a deletion inode to the
* journal.
*
* When regular file inodes are unlinked or a directory inode is removed, the
* 'ubifs_jnl_update()' function writes a corresponding deletion inode and
* direntry to the media, and adds the inode to orphans. After this, when the
* last reference to this inode has been dropped, this function is called. In
* general, it has to write one more deletion inode to the media, because if
* a commit happened between 'ubifs_jnl_update()' and
* 'ubifs_jnl_delete_inode()', the deletion inode is not in the journal
* anymore, and in fact it might not be on the flash anymore, because it might
* have been garbage-collected already. And for optimization reasons UBIFS does
* not read the orphan area if it has been unmounted cleanly, so it would have
* no indication in the journal that there is a deleted inode which has to be
* removed from TNC.
*
* However, if there was no commit between 'ubifs_jnl_update()' and
* 'ubifs_jnl_delete_inode()', then there is no need to write the deletion
* inode to the media for the second time. And this is quite a typical case.
*
* This function returns zero in case of success and a negative error code in
* case of failure.
*/
int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode)
{
int err;
struct ubifs_inode *ui = ubifs_inode(inode);
ubifs_assert(inode->i_nlink == 0);
if (ui->del_cmtno != c->cmt_no)
/* A commit happened for sure */
return ubifs_jnl_write_inode(c, inode);
down_read(&c->commit_sem);
/*
* Check commit number again, because the first test has been done
* without @c->commit_sem, so a commit might have happened.
*/
if (ui->del_cmtno != c->cmt_no) {
up_read(&c->commit_sem);
return ubifs_jnl_write_inode(c, inode);
}
err = ubifs_tnc_remove_ino(c, inode->i_ino);
if (err)
ubifs_ro_mode(c, err);
else
ubifs_delete_orphan(c, inode->i_ino);
up_read(&c->commit_sem);
return err;
}
/**
* ubifs_jnl_rename - rename a directory entry.
* @c: UBIFS file-system description object
* @old_dir: parent inode of directory entry to rename
* @old_dentry: directory entry to rename
* @new_dir: parent inode of directory entry to rename
* @new_dentry: new directory entry (or directory entry to replace)
* @sync: non-zero if the write-buffer has to be synchronized
*
* This function implements the re-name operation which may involve writing up
* to 3 inodes and 2 directory entries. It marks the written inodes as clean
* and returns zero on success. In case of failure, a negative error code is
* returned.
*/
int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
const struct dentry *old_dentry,
const struct inode *new_dir,
const struct dentry *new_dentry, int sync)
{
void *p;
union ubifs_key key;
struct ubifs_dent_node *dent, *dent2;
int err, dlen1, dlen2, ilen, lnum, offs, len;
const struct inode *old_inode = old_dentry->d_inode;
const struct inode *new_inode = new_dentry->d_inode;
int aligned_dlen1, aligned_dlen2, plen = UBIFS_INO_NODE_SZ;
int last_reference = !!(new_inode && new_inode->i_nlink == 0);
int move = (old_dir != new_dir);
struct ubifs_inode *uninitialized_var(new_ui);
dbg_jnl("dent '%pd' in dir ino %lu to dent '%pd' in dir ino %lu",
old_dentry, old_dir->i_ino, new_dentry, new_dir->i_ino);
ubifs_assert(ubifs_inode(old_dir)->data_len == 0);
ubifs_assert(ubifs_inode(new_dir)->data_len == 0);
ubifs_assert(mutex_is_locked(&ubifs_inode(old_dir)->ui_mutex));
ubifs_assert(mutex_is_locked(&ubifs_inode(new_dir)->ui_mutex));
dlen1 = UBIFS_DENT_NODE_SZ + new_dentry->d_name.len + 1;
dlen2 = UBIFS_DENT_NODE_SZ + old_dentry->d_name.len + 1;
if (new_inode) {
new_ui = ubifs_inode(new_inode);
ubifs_assert(mutex_is_locked(&new_ui->ui_mutex));
ilen = UBIFS_INO_NODE_SZ;
if (!last_reference)
ilen += new_ui->data_len;
} else
ilen = 0;
aligned_dlen1 = ALIGN(dlen1, 8);
aligned_dlen2 = ALIGN(dlen2, 8);
len = aligned_dlen1 + aligned_dlen2 + ALIGN(ilen, 8) + ALIGN(plen, 8);
if (old_dir != new_dir)
len += plen;
dent = kmalloc(len, GFP_NOFS);
if (!dent)
return -ENOMEM;
/* Make reservation before allocating sequence numbers */
err = make_reservation(c, BASEHD, len);
if (err)
goto out_free;
/* Make new dent */
dent->ch.node_type = UBIFS_DENT_NODE;
dent_key_init_flash(c, &dent->key, new_dir->i_ino, &new_dentry->d_name);
dent->inum = cpu_to_le64(old_inode->i_ino);
dent->type = get_dent_type(old_inode->i_mode);
dent->nlen = cpu_to_le16(new_dentry->d_name.len);
memcpy(dent->name, new_dentry->d_name.name, new_dentry->d_name.len);
dent->name[new_dentry->d_name.len] = '\0';
zero_dent_node_unused(dent);
ubifs_prep_grp_node(c, dent, dlen1, 0);
/* Make deletion dent */
dent2 = (void *)dent + aligned_dlen1;
dent2->ch.node_type = UBIFS_DENT_NODE;
dent_key_init_flash(c, &dent2->key, old_dir->i_ino,
&old_dentry->d_name);
dent2->inum = 0;
dent2->type = DT_UNKNOWN;
dent2->nlen = cpu_to_le16(old_dentry->d_name.len);
memcpy(dent2->name, old_dentry->d_name.name, old_dentry->d_name.len);
dent2->name[old_dentry->d_name.len] = '\0';
zero_dent_node_unused(dent2);
ubifs_prep_grp_node(c, dent2, dlen2, 0);
p = (void *)dent2 + aligned_dlen2;
if (new_inode) {
pack_inode(c, p, new_inode, 0);
p += ALIGN(ilen, 8);
}
if (!move)
pack_inode(c, p, old_dir, 1);
else {
pack_inode(c, p, old_dir, 0);
p += ALIGN(plen, 8);
pack_inode(c, p, new_dir, 1);
}
if (last_reference) {
err = ubifs_add_orphan(c, new_inode->i_ino);
if (err) {
release_head(c, BASEHD);
goto out_finish;
}
new_ui->del_cmtno = c->cmt_no;
}
err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync);
if (err)
goto out_release;
if (!sync) {
struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf;
ubifs_wbuf_add_ino_nolock(wbuf, new_dir->i_ino);
ubifs_wbuf_add_ino_nolock(wbuf, old_dir->i_ino);
if (new_inode)
ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf,
new_inode->i_ino);
}
release_head(c, BASEHD);
dent_key_init(c, &key, new_dir->i_ino, &new_dentry->d_name);
err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen1, &new_dentry->d_name);
if (err)
goto out_ro;
err = ubifs_add_dirt(c, lnum, dlen2);
if (err)
goto out_ro;
dent_key_init(c, &key, old_dir->i_ino, &old_dentry->d_name);
err = ubifs_tnc_remove_nm(c, &key, &old_dentry->d_name);
if (err)
goto out_ro;
offs += aligned_dlen1 + aligned_dlen2;
if (new_inode) {
ino_key_init(c, &key, new_inode->i_ino);
err = ubifs_tnc_add(c, &key, lnum, offs, ilen);
if (err)
goto out_ro;
offs += ALIGN(ilen, 8);
}
ino_key_init(c, &key, old_dir->i_ino);
err = ubifs_tnc_add(c, &key, lnum, offs, plen);
if (err)
goto out_ro;
if (old_dir != new_dir) {
offs += ALIGN(plen, 8);
ino_key_init(c, &key, new_dir->i_ino);
err = ubifs_tnc_add(c, &key, lnum, offs, plen);
if (err)
goto out_ro;
}
finish_reservation(c);
if (new_inode) {
mark_inode_clean(c, new_ui);
spin_lock(&new_ui->ui_lock);
new_ui->synced_i_size = new_ui->ui_size;
spin_unlock(&new_ui->ui_lock);
}
mark_inode_clean(c, ubifs_inode(old_dir));
if (move)
mark_inode_clean(c, ubifs_inode(new_dir));
kfree(dent);
return 0;
out_release:
release_head(c, BASEHD);
out_ro:
ubifs_ro_mode(c, err);
if (last_reference)
ubifs_delete_orphan(c, new_inode->i_ino);
out_finish:
finish_reservation(c);
out_free:
kfree(dent);
return err;
}
/**
* recomp_data_node - re-compress a truncated data node.
* @dn: data node to re-compress
* @new_len: new length
*
* This function is used when an inode is truncated and the last data node of
* the inode has to be re-compressed and re-written.
*/
static int recomp_data_node(const struct ubifs_info *c,
struct ubifs_data_node *dn, int *new_len)
{
void *buf;
int err, len, compr_type, out_len;
out_len = le32_to_cpu(dn->size);
buf = kmalloc(out_len * WORST_COMPR_FACTOR, GFP_NOFS);
if (!buf)
return -ENOMEM;
len = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ;
compr_type = le16_to_cpu(dn->compr_type);
err = ubifs_decompress(c, &dn->data, len, buf, &out_len, compr_type);
if (err)
goto out;
ubifs_compress(c, buf, *new_len, &dn->data, &out_len, &compr_type);
ubifs_assert(out_len <= UBIFS_BLOCK_SIZE);
dn->compr_type = cpu_to_le16(compr_type);
dn->size = cpu_to_le32(*new_len);
*new_len = UBIFS_DATA_NODE_SZ + out_len;
out:
kfree(buf);
return err;
}
/**
* ubifs_jnl_truncate - update the journal for a truncation.
* @c: UBIFS file-system description object
* @inode: inode to truncate
* @old_size: old size
* @new_size: new size
*
* When the size of a file decreases due to truncation, a truncation node is
* written, the journal tree is updated, and the last data block is re-written
* if it has been affected. The inode is also updated in order to synchronize
* the new inode size.
*
* This function marks the inode as clean and returns zero on success. In case
* of failure, a negative error code is returned.
*/
int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode,
loff_t old_size, loff_t new_size)
{
union ubifs_key key, to_key;
struct ubifs_ino_node *ino;
struct ubifs_trun_node *trun;
struct ubifs_data_node *uninitialized_var(dn);
int err, dlen, len, lnum, offs, bit, sz, sync = IS_SYNC(inode);
struct ubifs_inode *ui = ubifs_inode(inode);
ino_t inum = inode->i_ino;
unsigned int blk;
dbg_jnl("ino %lu, size %lld -> %lld",
(unsigned long)inum, old_size, new_size);
ubifs_assert(!ui->data_len);
ubifs_assert(S_ISREG(inode->i_mode));
ubifs_assert(mutex_is_locked(&ui->ui_mutex));
sz = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ +
UBIFS_MAX_DATA_NODE_SZ * WORST_COMPR_FACTOR;
ino = kmalloc(sz, GFP_NOFS);
if (!ino)
return -ENOMEM;
trun = (void *)ino + UBIFS_INO_NODE_SZ;
trun->ch.node_type = UBIFS_TRUN_NODE;
trun->inum = cpu_to_le32(inum);
trun->old_size = cpu_to_le64(old_size);
trun->new_size = cpu_to_le64(new_size);
zero_trun_node_unused(trun);
dlen = new_size & (UBIFS_BLOCK_SIZE - 1);
if (dlen) {
/* Get last data block so it can be truncated */
dn = (void *)trun + UBIFS_TRUN_NODE_SZ;
blk = new_size >> UBIFS_BLOCK_SHIFT;
data_key_init(c, &key, inum, blk);
dbg_jnlk(&key, "last block key ");
err = ubifs_tnc_lookup(c, &key, dn);
if (err == -ENOENT)
dlen = 0; /* Not found (so it is a hole) */
else if (err)
goto out_free;
else {
if (le32_to_cpu(dn->size) <= dlen)
dlen = 0; /* Nothing to do */
else {
int compr_type = le16_to_cpu(dn->compr_type);
if (compr_type != UBIFS_COMPR_NONE) {
err = recomp_data_node(c, dn, &dlen);
if (err)
goto out_free;
} else {
dn->size = cpu_to_le32(dlen);
dlen += UBIFS_DATA_NODE_SZ;
}
zero_data_node_unused(dn);
}
}
}
/* Must make reservation before allocating sequence numbers */
len = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ;
if (dlen)
len += dlen;
err = make_reservation(c, BASEHD, len);
if (err)
goto out_free;
pack_inode(c, ino, inode, 0);
ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1);
if (dlen)
ubifs_prep_grp_node(c, dn, dlen, 1);
err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync);
if (err)
goto out_release;
if (!sync)
ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, inum);
release_head(c, BASEHD);
if (dlen) {
sz = offs + UBIFS_INO_NODE_SZ + UBIFS_TRUN_NODE_SZ;
err = ubifs_tnc_add(c, &key, lnum, sz, dlen);
if (err)
goto out_ro;
}
ino_key_init(c, &key, inum);
err = ubifs_tnc_add(c, &key, lnum, offs, UBIFS_INO_NODE_SZ);
if (err)
goto out_ro;
err = ubifs_add_dirt(c, lnum, UBIFS_TRUN_NODE_SZ);
if (err)
goto out_ro;
bit = new_size & (UBIFS_BLOCK_SIZE - 1);
blk = (new_size >> UBIFS_BLOCK_SHIFT) + (bit ? 1 : 0);
data_key_init(c, &key, inum, blk);
bit = old_size & (UBIFS_BLOCK_SIZE - 1);
blk = (old_size >> UBIFS_BLOCK_SHIFT) - (bit ? 0 : 1);
data_key_init(c, &to_key, inum, blk);
err = ubifs_tnc_remove_range(c, &key, &to_key);
if (err)
goto out_ro;
finish_reservation(c);
spin_lock(&ui->ui_lock);
ui->synced_i_size = ui->ui_size;
spin_unlock(&ui->ui_lock);
mark_inode_clean(c, ui);
kfree(ino);
return 0;
out_release:
release_head(c, BASEHD);
out_ro:
ubifs_ro_mode(c, err);
finish_reservation(c);
out_free:
kfree(ino);
return err;
}
/**
* ubifs_jnl_delete_xattr - delete an extended attribute.
* @c: UBIFS file-system description object
* @host: host inode
* @inode: extended attribute inode
* @nm: extended attribute entry name
*
* This function delete an extended attribute which is very similar to
* un-linking regular files - it writes a deletion xentry, a deletion inode and
* updates the target inode. Returns zero in case of success and a negative
* error code in case of failure.
*/
int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host,
const struct inode *inode, const struct qstr *nm)
{
int err, xlen, hlen, len, lnum, xent_offs, aligned_xlen;
struct ubifs_dent_node *xent;
struct ubifs_ino_node *ino;
union ubifs_key xent_key, key1, key2;
int sync = IS_DIRSYNC(host);
struct ubifs_inode *host_ui = ubifs_inode(host);
dbg_jnl("host %lu, xattr ino %lu, name '%s', data len %d",
host->i_ino, inode->i_ino, nm->name,
ubifs_inode(inode)->data_len);
ubifs_assert(inode->i_nlink == 0);
ubifs_assert(mutex_is_locked(&host_ui->ui_mutex));
/*
* Since we are deleting the inode, we do not bother to attach any data
* to it and assume its length is %UBIFS_INO_NODE_SZ.
*/
xlen = UBIFS_DENT_NODE_SZ + nm->len + 1;
aligned_xlen = ALIGN(xlen, 8);
hlen = host_ui->data_len + UBIFS_INO_NODE_SZ;
len = aligned_xlen + UBIFS_INO_NODE_SZ + ALIGN(hlen, 8);
xent = kmalloc(len, GFP_NOFS);
if (!xent)
return -ENOMEM;
/* Make reservation before allocating sequence numbers */
err = make_reservation(c, BASEHD, len);
if (err) {
kfree(xent);
return err;
}
xent->ch.node_type = UBIFS_XENT_NODE;
xent_key_init(c, &xent_key, host->i_ino, nm);
key_write(c, &xent_key, xent->key);
xent->inum = 0;
xent->type = get_dent_type(inode->i_mode);
xent->nlen = cpu_to_le16(nm->len);
memcpy(xent->name, nm->name, nm->len);
xent->name[nm->len] = '\0';
zero_dent_node_unused(xent);
ubifs_prep_grp_node(c, xent, xlen, 0);
ino = (void *)xent + aligned_xlen;
pack_inode(c, ino, inode, 0);
ino = (void *)ino + UBIFS_INO_NODE_SZ;
pack_inode(c, ino, host, 1);
err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync);
if (!sync && !err)
ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, host->i_ino);
release_head(c, BASEHD);
kfree(xent);
if (err)
goto out_ro;
/* Remove the extended attribute entry from TNC */
err = ubifs_tnc_remove_nm(c, &xent_key, nm);
if (err)
goto out_ro;
err = ubifs_add_dirt(c, lnum, xlen);
if (err)
goto out_ro;
/*
* Remove all nodes belonging to the extended attribute inode from TNC.
* Well, there actually must be only one node - the inode itself.
*/
lowest_ino_key(c, &key1, inode->i_ino);
highest_ino_key(c, &key2, inode->i_ino);
err = ubifs_tnc_remove_range(c, &key1, &key2);
if (err)
goto out_ro;
err = ubifs_add_dirt(c, lnum, UBIFS_INO_NODE_SZ);
if (err)
goto out_ro;
/* And update TNC with the new host inode position */
ino_key_init(c, &key1, host->i_ino);
err = ubifs_tnc_add(c, &key1, lnum, xent_offs + len - hlen, hlen);
if (err)
goto out_ro;
finish_reservation(c);
spin_lock(&host_ui->ui_lock);
host_ui->synced_i_size = host_ui->ui_size;
spin_unlock(&host_ui->ui_lock);
mark_inode_clean(c, host_ui);
return 0;
out_ro:
ubifs_ro_mode(c, err);
finish_reservation(c);
return err;
}
/**
* ubifs_jnl_change_xattr - change an extended attribute.
* @c: UBIFS file-system description object
* @inode: extended attribute inode
* @host: host inode
*
* This function writes the updated version of an extended attribute inode and
* the host inode to the journal (to the base head). The host inode is written
* after the extended attribute inode in order to guarantee that the extended
* attribute will be flushed when the inode is synchronized by 'fsync()' and
* consequently, the write-buffer is synchronized. This function returns zero
* in case of success and a negative error code in case of failure.
*/
int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode,
const struct inode *host)
{
int err, len1, len2, aligned_len, aligned_len1, lnum, offs;
struct ubifs_inode *host_ui = ubifs_inode(host);
struct ubifs_ino_node *ino;
union ubifs_key key;
int sync = IS_DIRSYNC(host);
dbg_jnl("ino %lu, ino %lu", host->i_ino, inode->i_ino);
ubifs_assert(host->i_nlink > 0);
ubifs_assert(inode->i_nlink > 0);
ubifs_assert(mutex_is_locked(&host_ui->ui_mutex));
len1 = UBIFS_INO_NODE_SZ + host_ui->data_len;
len2 = UBIFS_INO_NODE_SZ + ubifs_inode(inode)->data_len;
aligned_len1 = ALIGN(len1, 8);
aligned_len = aligned_len1 + ALIGN(len2, 8);
ino = kmalloc(aligned_len, GFP_NOFS);
if (!ino)
return -ENOMEM;
/* Make reservation before allocating sequence numbers */
err = make_reservation(c, BASEHD, aligned_len);
if (err)
goto out_free;
pack_inode(c, ino, host, 0);
pack_inode(c, (void *)ino + aligned_len1, inode, 1);
err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0);
if (!sync && !err) {
struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf;
ubifs_wbuf_add_ino_nolock(wbuf, host->i_ino);
ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino);
}
release_head(c, BASEHD);
if (err)
goto out_ro;
ino_key_init(c, &key, host->i_ino);
err = ubifs_tnc_add(c, &key, lnum, offs, len1);
if (err)
goto out_ro;
ino_key_init(c, &key, inode->i_ino);
err = ubifs_tnc_add(c, &key, lnum, offs + aligned_len1, len2);
if (err)
goto out_ro;
finish_reservation(c);
spin_lock(&host_ui->ui_lock);
host_ui->synced_i_size = host_ui->ui_size;
spin_unlock(&host_ui->ui_lock);
mark_inode_clean(c, host_ui);
kfree(ino);
return 0;
out_ro:
ubifs_ro_mode(c, err);
finish_reservation(c);
out_free:
kfree(ino);
return err;
}