linux_dsm_epyc7002/drivers/net/wireless/rtl8187_rtl8225.h
Herton Ronaldo Krzesinski 4ece16a1cf rtl8187: use different ANAPARAM*_OFF values for 8187B
For RTL8187B it seems we need special values too for ANAPARAM*_OFF
values (and not use RTL8187 ones). The ANAPARAM*_OFF values used are the
stock ones read from the hardware after a cold boot.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14 14:52:56 -04:00

45 lines
1.4 KiB
C

/*
* Radio tuning definitions for RTL8225 on RTL8187
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
*
* Based on the r8187 driver, which is:
* Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef RTL8187_RTL8225_H
#define RTL8187_RTL8225_H
#define RTL8187_RTL8225_ANAPARAM_ON 0xa0000a59
#define RTL8187_RTL8225_ANAPARAM2_ON 0x860c7312
#define RTL8187_RTL8225_ANAPARAM_OFF 0xa00beb59
#define RTL8187_RTL8225_ANAPARAM2_OFF 0x840dec11
#define RTL8187B_RTL8225_ANAPARAM_ON 0x45090658
#define RTL8187B_RTL8225_ANAPARAM2_ON 0x727f3f52
#define RTL8187B_RTL8225_ANAPARAM3_ON 0x00
#define RTL8187B_RTL8225_ANAPARAM_OFF 0x55480658
#define RTL8187B_RTL8225_ANAPARAM2_OFF 0x72003f50
#define RTL8187B_RTL8225_ANAPARAM3_OFF 0x00
const struct rtl818x_rf_ops * rtl8187_detect_rf(struct ieee80211_hw *);
static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
u8 addr, u32 data)
{
rtl8187_write_phy(dev, addr, data);
}
static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev,
u8 addr, u32 data)
{
rtl8187_write_phy(dev, addr, data | 0x10000);
}
#endif /* RTL8187_RTL8225_H */