mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 02:35:09 +07:00
54787d7c14
Having static inline oneliner does not benefit too much when it is only called from another oneliner function. Remove some of the 'onion'. This simplifies also the coming usage of the gpiolib defines. We can do conversion from chip bits to gpiolib direction defines as last step in the get_direction callback. Drivers can use chip specific values in driver internal functions and do conversion only once. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191113071045.GA22110@localhost.localdomain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1425 lines
36 KiB
C
1425 lines
36 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Combined GPIO and pin controller support for Renesas RZ/A1 (r7s72100) SoC
|
|
*
|
|
* Copyright (C) 2017 Jacopo Mondi
|
|
*/
|
|
|
|
/*
|
|
* This pin controller/gpio combined driver supports Renesas devices of RZ/A1
|
|
* family.
|
|
* This includes SoCs which are sub- or super- sets of this particular line,
|
|
* as RZ/A1H (r7s721000), RZ/A1M (r7s721010) and RZ/A1L (r7s721020).
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "core.h"
|
|
#include "devicetree.h"
|
|
#include "pinconf.h"
|
|
#include "pinmux.h"
|
|
|
|
#define DRIVER_NAME "pinctrl-rza1"
|
|
|
|
#define RZA1_P_REG 0x0000
|
|
#define RZA1_PPR_REG 0x0200
|
|
#define RZA1_PM_REG 0x0300
|
|
#define RZA1_PMC_REG 0x0400
|
|
#define RZA1_PFC_REG 0x0500
|
|
#define RZA1_PFCE_REG 0x0600
|
|
#define RZA1_PFCEA_REG 0x0a00
|
|
#define RZA1_PIBC_REG 0x4000
|
|
#define RZA1_PBDC_REG 0x4100
|
|
#define RZA1_PIPC_REG 0x4200
|
|
|
|
#define RZA1_ADDR(mem, reg, port) ((mem) + (reg) + ((port) * 4))
|
|
|
|
#define RZA1_NPORTS 12
|
|
#define RZA1_PINS_PER_PORT 16
|
|
#define RZA1_NPINS (RZA1_PINS_PER_PORT * RZA1_NPORTS)
|
|
#define RZA1_PIN_ID_TO_PORT(id) ((id) / RZA1_PINS_PER_PORT)
|
|
#define RZA1_PIN_ID_TO_PIN(id) ((id) % RZA1_PINS_PER_PORT)
|
|
|
|
/*
|
|
* Use 16 lower bits [15:0] for pin identifier
|
|
* Use 16 higher bits [31:16] for pin mux function
|
|
*/
|
|
#define MUX_PIN_ID_MASK GENMASK(15, 0)
|
|
#define MUX_FUNC_MASK GENMASK(31, 16)
|
|
|
|
#define MUX_FUNC_OFFS 16
|
|
#define MUX_FUNC(pinconf) \
|
|
((pinconf & MUX_FUNC_MASK) >> MUX_FUNC_OFFS)
|
|
#define MUX_FUNC_PFC_MASK BIT(0)
|
|
#define MUX_FUNC_PFCE_MASK BIT(1)
|
|
#define MUX_FUNC_PFCEA_MASK BIT(2)
|
|
|
|
/* Pin mux flags */
|
|
#define MUX_FLAGS_BIDIR BIT(0)
|
|
#define MUX_FLAGS_SWIO_INPUT BIT(1)
|
|
#define MUX_FLAGS_SWIO_OUTPUT BIT(2)
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1 pinmux flags
|
|
*/
|
|
|
|
/**
|
|
* rza1_bidir_pin - describe a single pin that needs bidir flag applied.
|
|
*/
|
|
struct rza1_bidir_pin {
|
|
u8 pin: 4;
|
|
u8 func: 4;
|
|
};
|
|
|
|
/**
|
|
* rza1_bidir_entry - describe a list of pins that needs bidir flag applied.
|
|
* Each struct rza1_bidir_entry describes a port.
|
|
*/
|
|
struct rza1_bidir_entry {
|
|
const unsigned int npins;
|
|
const struct rza1_bidir_pin *pins;
|
|
};
|
|
|
|
/**
|
|
* rza1_swio_pin - describe a single pin that needs bidir flag applied.
|
|
*/
|
|
struct rza1_swio_pin {
|
|
u16 pin: 4;
|
|
u16 port: 4;
|
|
u16 func: 4;
|
|
u16 input: 1;
|
|
};
|
|
|
|
/**
|
|
* rza1_swio_entry - describe a list of pins that needs swio flag applied
|
|
*/
|
|
struct rza1_swio_entry {
|
|
const unsigned int npins;
|
|
const struct rza1_swio_pin *pins;
|
|
};
|
|
|
|
/**
|
|
* rza1_pinmux_conf - group together bidir and swio pinmux flag tables
|
|
*/
|
|
struct rza1_pinmux_conf {
|
|
const struct rza1_bidir_entry *bidir_entries;
|
|
const struct rza1_swio_entry *swio_entries;
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1H (r7s72100) pinmux flags
|
|
*/
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p1[] = {
|
|
{ .pin = 0, .func = 1 },
|
|
{ .pin = 1, .func = 1 },
|
|
{ .pin = 2, .func = 1 },
|
|
{ .pin = 3, .func = 1 },
|
|
{ .pin = 4, .func = 1 },
|
|
{ .pin = 5, .func = 1 },
|
|
{ .pin = 6, .func = 1 },
|
|
{ .pin = 7, .func = 1 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p2[] = {
|
|
{ .pin = 0, .func = 1 },
|
|
{ .pin = 1, .func = 1 },
|
|
{ .pin = 2, .func = 1 },
|
|
{ .pin = 3, .func = 1 },
|
|
{ .pin = 4, .func = 1 },
|
|
{ .pin = 0, .func = 4 },
|
|
{ .pin = 1, .func = 4 },
|
|
{ .pin = 2, .func = 4 },
|
|
{ .pin = 3, .func = 4 },
|
|
{ .pin = 5, .func = 1 },
|
|
{ .pin = 6, .func = 1 },
|
|
{ .pin = 7, .func = 1 },
|
|
{ .pin = 8, .func = 1 },
|
|
{ .pin = 9, .func = 1 },
|
|
{ .pin = 10, .func = 1 },
|
|
{ .pin = 11, .func = 1 },
|
|
{ .pin = 12, .func = 1 },
|
|
{ .pin = 13, .func = 1 },
|
|
{ .pin = 14, .func = 1 },
|
|
{ .pin = 15, .func = 1 },
|
|
{ .pin = 12, .func = 4 },
|
|
{ .pin = 13, .func = 4 },
|
|
{ .pin = 14, .func = 4 },
|
|
{ .pin = 15, .func = 4 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p3[] = {
|
|
{ .pin = 3, .func = 2 },
|
|
{ .pin = 10, .func = 7 },
|
|
{ .pin = 11, .func = 7 },
|
|
{ .pin = 13, .func = 7 },
|
|
{ .pin = 14, .func = 7 },
|
|
{ .pin = 15, .func = 7 },
|
|
{ .pin = 10, .func = 8 },
|
|
{ .pin = 11, .func = 8 },
|
|
{ .pin = 13, .func = 8 },
|
|
{ .pin = 14, .func = 8 },
|
|
{ .pin = 15, .func = 8 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p4[] = {
|
|
{ .pin = 0, .func = 8 },
|
|
{ .pin = 1, .func = 8 },
|
|
{ .pin = 2, .func = 8 },
|
|
{ .pin = 3, .func = 8 },
|
|
{ .pin = 10, .func = 3 },
|
|
{ .pin = 11, .func = 3 },
|
|
{ .pin = 13, .func = 3 },
|
|
{ .pin = 14, .func = 3 },
|
|
{ .pin = 15, .func = 3 },
|
|
{ .pin = 10, .func = 4 },
|
|
{ .pin = 11, .func = 4 },
|
|
{ .pin = 13, .func = 4 },
|
|
{ .pin = 14, .func = 4 },
|
|
{ .pin = 15, .func = 4 },
|
|
{ .pin = 12, .func = 5 },
|
|
{ .pin = 13, .func = 5 },
|
|
{ .pin = 14, .func = 5 },
|
|
{ .pin = 15, .func = 5 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p6[] = {
|
|
{ .pin = 0, .func = 1 },
|
|
{ .pin = 1, .func = 1 },
|
|
{ .pin = 2, .func = 1 },
|
|
{ .pin = 3, .func = 1 },
|
|
{ .pin = 4, .func = 1 },
|
|
{ .pin = 5, .func = 1 },
|
|
{ .pin = 6, .func = 1 },
|
|
{ .pin = 7, .func = 1 },
|
|
{ .pin = 8, .func = 1 },
|
|
{ .pin = 9, .func = 1 },
|
|
{ .pin = 10, .func = 1 },
|
|
{ .pin = 11, .func = 1 },
|
|
{ .pin = 12, .func = 1 },
|
|
{ .pin = 13, .func = 1 },
|
|
{ .pin = 14, .func = 1 },
|
|
{ .pin = 15, .func = 1 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p7[] = {
|
|
{ .pin = 13, .func = 3 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p8[] = {
|
|
{ .pin = 8, .func = 3 },
|
|
{ .pin = 9, .func = 3 },
|
|
{ .pin = 10, .func = 3 },
|
|
{ .pin = 11, .func = 3 },
|
|
{ .pin = 14, .func = 2 },
|
|
{ .pin = 15, .func = 2 },
|
|
{ .pin = 14, .func = 3 },
|
|
{ .pin = 15, .func = 3 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p9[] = {
|
|
{ .pin = 0, .func = 2 },
|
|
{ .pin = 1, .func = 2 },
|
|
{ .pin = 4, .func = 2 },
|
|
{ .pin = 5, .func = 2 },
|
|
{ .pin = 6, .func = 2 },
|
|
{ .pin = 7, .func = 2 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1h_bidir_pins_p11[] = {
|
|
{ .pin = 6, .func = 2 },
|
|
{ .pin = 7, .func = 2 },
|
|
{ .pin = 9, .func = 2 },
|
|
{ .pin = 6, .func = 4 },
|
|
{ .pin = 7, .func = 4 },
|
|
{ .pin = 9, .func = 4 },
|
|
{ .pin = 10, .func = 2 },
|
|
{ .pin = 11, .func = 2 },
|
|
{ .pin = 10, .func = 4 },
|
|
{ .pin = 11, .func = 4 },
|
|
{ .pin = 12, .func = 4 },
|
|
{ .pin = 13, .func = 4 },
|
|
{ .pin = 14, .func = 4 },
|
|
{ .pin = 15, .func = 4 },
|
|
};
|
|
|
|
static const struct rza1_swio_pin rza1h_swio_pins[] = {
|
|
{ .port = 2, .pin = 7, .func = 4, .input = 0 },
|
|
{ .port = 2, .pin = 11, .func = 4, .input = 0 },
|
|
{ .port = 3, .pin = 7, .func = 3, .input = 0 },
|
|
{ .port = 3, .pin = 7, .func = 8, .input = 0 },
|
|
{ .port = 4, .pin = 7, .func = 5, .input = 0 },
|
|
{ .port = 4, .pin = 7, .func = 11, .input = 0 },
|
|
{ .port = 4, .pin = 15, .func = 6, .input = 0 },
|
|
{ .port = 5, .pin = 0, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 1, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 2, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 3, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 4, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 5, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 6, .func = 1, .input = 1 },
|
|
{ .port = 5, .pin = 7, .func = 1, .input = 1 },
|
|
{ .port = 7, .pin = 4, .func = 6, .input = 0 },
|
|
{ .port = 7, .pin = 11, .func = 2, .input = 0 },
|
|
{ .port = 8, .pin = 10, .func = 8, .input = 0 },
|
|
{ .port = 10, .pin = 15, .func = 2, .input = 0 },
|
|
};
|
|
|
|
static const struct rza1_bidir_entry rza1h_bidir_entries[RZA1_NPORTS] = {
|
|
[1] = { ARRAY_SIZE(rza1h_bidir_pins_p1), rza1h_bidir_pins_p1 },
|
|
[2] = { ARRAY_SIZE(rza1h_bidir_pins_p2), rza1h_bidir_pins_p2 },
|
|
[3] = { ARRAY_SIZE(rza1h_bidir_pins_p3), rza1h_bidir_pins_p3 },
|
|
[4] = { ARRAY_SIZE(rza1h_bidir_pins_p4), rza1h_bidir_pins_p4 },
|
|
[6] = { ARRAY_SIZE(rza1h_bidir_pins_p6), rza1h_bidir_pins_p6 },
|
|
[7] = { ARRAY_SIZE(rza1h_bidir_pins_p7), rza1h_bidir_pins_p7 },
|
|
[8] = { ARRAY_SIZE(rza1h_bidir_pins_p8), rza1h_bidir_pins_p8 },
|
|
[9] = { ARRAY_SIZE(rza1h_bidir_pins_p9), rza1h_bidir_pins_p9 },
|
|
[11] = { ARRAY_SIZE(rza1h_bidir_pins_p11), rza1h_bidir_pins_p11 },
|
|
};
|
|
|
|
static const struct rza1_swio_entry rza1h_swio_entries[] = {
|
|
[0] = { ARRAY_SIZE(rza1h_swio_pins), rza1h_swio_pins },
|
|
};
|
|
|
|
/* RZ/A1H (r7s72100x) pinmux flags table */
|
|
static const struct rza1_pinmux_conf rza1h_pmx_conf = {
|
|
.bidir_entries = rza1h_bidir_entries,
|
|
.swio_entries = rza1h_swio_entries,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1L (r7s72102) pinmux flags
|
|
*/
|
|
|
|
static const struct rza1_bidir_pin rza1l_bidir_pins_p1[] = {
|
|
{ .pin = 0, .func = 1 },
|
|
{ .pin = 1, .func = 1 },
|
|
{ .pin = 2, .func = 1 },
|
|
{ .pin = 3, .func = 1 },
|
|
{ .pin = 4, .func = 1 },
|
|
{ .pin = 5, .func = 1 },
|
|
{ .pin = 6, .func = 1 },
|
|
{ .pin = 7, .func = 1 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1l_bidir_pins_p3[] = {
|
|
{ .pin = 0, .func = 2 },
|
|
{ .pin = 1, .func = 2 },
|
|
{ .pin = 2, .func = 2 },
|
|
{ .pin = 4, .func = 2 },
|
|
{ .pin = 5, .func = 2 },
|
|
{ .pin = 10, .func = 2 },
|
|
{ .pin = 11, .func = 2 },
|
|
{ .pin = 12, .func = 2 },
|
|
{ .pin = 13, .func = 2 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1l_bidir_pins_p4[] = {
|
|
{ .pin = 1, .func = 4 },
|
|
{ .pin = 2, .func = 2 },
|
|
{ .pin = 3, .func = 2 },
|
|
{ .pin = 6, .func = 2 },
|
|
{ .pin = 7, .func = 2 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1l_bidir_pins_p5[] = {
|
|
{ .pin = 0, .func = 1 },
|
|
{ .pin = 1, .func = 1 },
|
|
{ .pin = 2, .func = 1 },
|
|
{ .pin = 3, .func = 1 },
|
|
{ .pin = 4, .func = 1 },
|
|
{ .pin = 5, .func = 1 },
|
|
{ .pin = 6, .func = 1 },
|
|
{ .pin = 7, .func = 1 },
|
|
{ .pin = 8, .func = 1 },
|
|
{ .pin = 9, .func = 1 },
|
|
{ .pin = 10, .func = 1 },
|
|
{ .pin = 11, .func = 1 },
|
|
{ .pin = 12, .func = 1 },
|
|
{ .pin = 13, .func = 1 },
|
|
{ .pin = 14, .func = 1 },
|
|
{ .pin = 15, .func = 1 },
|
|
{ .pin = 0, .func = 2 },
|
|
{ .pin = 1, .func = 2 },
|
|
{ .pin = 2, .func = 2 },
|
|
{ .pin = 3, .func = 2 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1l_bidir_pins_p6[] = {
|
|
{ .pin = 0, .func = 1 },
|
|
{ .pin = 1, .func = 1 },
|
|
{ .pin = 2, .func = 1 },
|
|
{ .pin = 3, .func = 1 },
|
|
{ .pin = 4, .func = 1 },
|
|
{ .pin = 5, .func = 1 },
|
|
{ .pin = 6, .func = 1 },
|
|
{ .pin = 7, .func = 1 },
|
|
{ .pin = 8, .func = 1 },
|
|
{ .pin = 9, .func = 1 },
|
|
{ .pin = 10, .func = 1 },
|
|
{ .pin = 11, .func = 1 },
|
|
{ .pin = 12, .func = 1 },
|
|
{ .pin = 13, .func = 1 },
|
|
{ .pin = 14, .func = 1 },
|
|
{ .pin = 15, .func = 1 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1l_bidir_pins_p7[] = {
|
|
{ .pin = 2, .func = 2 },
|
|
{ .pin = 3, .func = 2 },
|
|
{ .pin = 5, .func = 2 },
|
|
{ .pin = 6, .func = 2 },
|
|
{ .pin = 7, .func = 2 },
|
|
{ .pin = 2, .func = 3 },
|
|
{ .pin = 3, .func = 3 },
|
|
{ .pin = 5, .func = 3 },
|
|
{ .pin = 6, .func = 3 },
|
|
{ .pin = 7, .func = 3 },
|
|
};
|
|
|
|
static const struct rza1_bidir_pin rza1l_bidir_pins_p9[] = {
|
|
{ .pin = 1, .func = 2 },
|
|
{ .pin = 0, .func = 3 },
|
|
{ .pin = 1, .func = 3 },
|
|
{ .pin = 3, .func = 3 },
|
|
{ .pin = 4, .func = 3 },
|
|
{ .pin = 5, .func = 3 },
|
|
};
|
|
|
|
static const struct rza1_swio_pin rza1l_swio_pins[] = {
|
|
{ .port = 2, .pin = 8, .func = 2, .input = 0 },
|
|
{ .port = 5, .pin = 6, .func = 3, .input = 0 },
|
|
{ .port = 6, .pin = 6, .func = 3, .input = 0 },
|
|
{ .port = 6, .pin = 10, .func = 3, .input = 0 },
|
|
{ .port = 7, .pin = 10, .func = 2, .input = 0 },
|
|
{ .port = 8, .pin = 2, .func = 3, .input = 0 },
|
|
};
|
|
|
|
static const struct rza1_bidir_entry rza1l_bidir_entries[RZA1_NPORTS] = {
|
|
[1] = { ARRAY_SIZE(rza1l_bidir_pins_p1), rza1l_bidir_pins_p1 },
|
|
[3] = { ARRAY_SIZE(rza1l_bidir_pins_p3), rza1l_bidir_pins_p3 },
|
|
[4] = { ARRAY_SIZE(rza1l_bidir_pins_p4), rza1l_bidir_pins_p4 },
|
|
[5] = { ARRAY_SIZE(rza1l_bidir_pins_p4), rza1l_bidir_pins_p5 },
|
|
[6] = { ARRAY_SIZE(rza1l_bidir_pins_p6), rza1l_bidir_pins_p6 },
|
|
[7] = { ARRAY_SIZE(rza1l_bidir_pins_p7), rza1l_bidir_pins_p7 },
|
|
[9] = { ARRAY_SIZE(rza1l_bidir_pins_p9), rza1l_bidir_pins_p9 },
|
|
};
|
|
|
|
static const struct rza1_swio_entry rza1l_swio_entries[] = {
|
|
[0] = { ARRAY_SIZE(rza1h_swio_pins), rza1h_swio_pins },
|
|
};
|
|
|
|
/* RZ/A1L (r7s72102x) pinmux flags table */
|
|
static const struct rza1_pinmux_conf rza1l_pmx_conf = {
|
|
.bidir_entries = rza1l_bidir_entries,
|
|
.swio_entries = rza1l_swio_entries,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1 types
|
|
*/
|
|
/**
|
|
* rza1_mux_conf - describes a pin multiplexing operation
|
|
*
|
|
* @id: the pin identifier from 0 to RZA1_NPINS
|
|
* @port: the port where pin sits on
|
|
* @pin: pin id
|
|
* @mux_func: alternate function id number
|
|
* @mux_flags: alternate function flags
|
|
* @value: output value to set the pin to
|
|
*/
|
|
struct rza1_mux_conf {
|
|
u16 id;
|
|
u8 port;
|
|
u8 pin;
|
|
u8 mux_func;
|
|
u8 mux_flags;
|
|
u8 value;
|
|
};
|
|
|
|
/**
|
|
* rza1_port - describes a pin port
|
|
*
|
|
* This is mostly useful to lock register writes per-bank and not globally.
|
|
*
|
|
* @lock: protect access to HW registers
|
|
* @id: port number
|
|
* @base: logical address base
|
|
* @pins: pins sitting on this port
|
|
*/
|
|
struct rza1_port {
|
|
spinlock_t lock;
|
|
unsigned int id;
|
|
void __iomem *base;
|
|
struct pinctrl_pin_desc *pins;
|
|
};
|
|
|
|
/**
|
|
* rza1_pinctrl - RZ pincontroller device
|
|
*
|
|
* @dev: parent device structure
|
|
* @mutex: protect [pinctrl|pinmux]_generic functions
|
|
* @base: logical address base
|
|
* @nports: number of pin controller ports
|
|
* @ports: pin controller banks
|
|
* @pins: pin array for pinctrl core
|
|
* @desc: pincontroller desc for pinctrl core
|
|
* @pctl: pinctrl device
|
|
* @data: device specific data
|
|
*/
|
|
struct rza1_pinctrl {
|
|
struct device *dev;
|
|
|
|
struct mutex mutex;
|
|
|
|
void __iomem *base;
|
|
|
|
unsigned int nport;
|
|
struct rza1_port *ports;
|
|
|
|
struct pinctrl_pin_desc *pins;
|
|
struct pinctrl_desc desc;
|
|
struct pinctrl_dev *pctl;
|
|
|
|
const void *data;
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1 pinmux flags
|
|
*/
|
|
static inline bool rza1_pinmux_get_bidir(unsigned int port,
|
|
unsigned int pin,
|
|
unsigned int func,
|
|
const struct rza1_bidir_entry *table)
|
|
{
|
|
const struct rza1_bidir_entry *entry = &table[port];
|
|
const struct rza1_bidir_pin *bidir_pin;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < entry->npins; ++i) {
|
|
bidir_pin = &entry->pins[i];
|
|
if (bidir_pin->pin == pin && bidir_pin->func == func)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static inline int rza1_pinmux_get_swio(unsigned int port,
|
|
unsigned int pin,
|
|
unsigned int func,
|
|
const struct rza1_swio_entry *table)
|
|
{
|
|
const struct rza1_swio_pin *swio_pin;
|
|
unsigned int i;
|
|
|
|
|
|
for (i = 0; i < table->npins; ++i) {
|
|
swio_pin = &table->pins[i];
|
|
if (swio_pin->port == port && swio_pin->pin == pin &&
|
|
swio_pin->func == func)
|
|
return swio_pin->input;
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
/**
|
|
* rza1_pinmux_get_flags() - return pinmux flags associated to a pin
|
|
*/
|
|
static unsigned int rza1_pinmux_get_flags(unsigned int port, unsigned int pin,
|
|
unsigned int func,
|
|
struct rza1_pinctrl *rza1_pctl)
|
|
|
|
{
|
|
const struct rza1_pinmux_conf *pmx_conf = rza1_pctl->data;
|
|
const struct rza1_bidir_entry *bidir_entries = pmx_conf->bidir_entries;
|
|
const struct rza1_swio_entry *swio_entries = pmx_conf->swio_entries;
|
|
unsigned int pmx_flags = 0;
|
|
int ret;
|
|
|
|
if (rza1_pinmux_get_bidir(port, pin, func, bidir_entries))
|
|
pmx_flags |= MUX_FLAGS_BIDIR;
|
|
|
|
ret = rza1_pinmux_get_swio(port, pin, func, swio_entries);
|
|
if (ret == 0)
|
|
pmx_flags |= MUX_FLAGS_SWIO_OUTPUT;
|
|
else if (ret > 0)
|
|
pmx_flags |= MUX_FLAGS_SWIO_INPUT;
|
|
|
|
return pmx_flags;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1 SoC operations
|
|
*/
|
|
|
|
/**
|
|
* rza1_set_bit() - un-locked set/clear a single bit in pin configuration
|
|
* registers
|
|
*/
|
|
static inline void rza1_set_bit(struct rza1_port *port, unsigned int reg,
|
|
unsigned int bit, bool set)
|
|
{
|
|
void __iomem *mem = RZA1_ADDR(port->base, reg, port->id);
|
|
u16 val = ioread16(mem);
|
|
|
|
if (set)
|
|
val |= BIT(bit);
|
|
else
|
|
val &= ~BIT(bit);
|
|
|
|
iowrite16(val, mem);
|
|
}
|
|
|
|
static inline unsigned int rza1_get_bit(struct rza1_port *port,
|
|
unsigned int reg, unsigned int bit)
|
|
{
|
|
void __iomem *mem = RZA1_ADDR(port->base, reg, port->id);
|
|
|
|
return ioread16(mem) & BIT(bit);
|
|
}
|
|
|
|
/**
|
|
* rza1_pin_reset() - reset a pin to default initial state
|
|
*
|
|
* Reset pin state disabling input buffer and bi-directional control,
|
|
* and configure it as input port.
|
|
* Note that pin is now configured with direction as input but with input
|
|
* buffer disabled. This implies the pin value cannot be read in this state.
|
|
*
|
|
* @port: port where pin sits on
|
|
* @pin: pin offset
|
|
*/
|
|
static void rza1_pin_reset(struct rza1_port *port, unsigned int pin)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&port->lock, irqflags);
|
|
rza1_set_bit(port, RZA1_PIBC_REG, pin, 0);
|
|
rza1_set_bit(port, RZA1_PBDC_REG, pin, 0);
|
|
|
|
rza1_set_bit(port, RZA1_PM_REG, pin, 1);
|
|
rza1_set_bit(port, RZA1_PMC_REG, pin, 0);
|
|
rza1_set_bit(port, RZA1_PIPC_REG, pin, 0);
|
|
spin_unlock_irqrestore(&port->lock, irqflags);
|
|
}
|
|
|
|
/**
|
|
* rza1_pin_set_direction() - set I/O direction on a pin in port mode
|
|
*
|
|
* When running in output port mode keep PBDC enabled to allow reading the
|
|
* pin value from PPR.
|
|
*
|
|
* @port: port where pin sits on
|
|
* @pin: pin offset
|
|
* @input: input enable/disable flag
|
|
*/
|
|
static inline void rza1_pin_set_direction(struct rza1_port *port,
|
|
unsigned int pin, bool input)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&port->lock, irqflags);
|
|
|
|
rza1_set_bit(port, RZA1_PIBC_REG, pin, 1);
|
|
if (input) {
|
|
rza1_set_bit(port, RZA1_PM_REG, pin, 1);
|
|
rza1_set_bit(port, RZA1_PBDC_REG, pin, 0);
|
|
} else {
|
|
rza1_set_bit(port, RZA1_PM_REG, pin, 0);
|
|
rza1_set_bit(port, RZA1_PBDC_REG, pin, 1);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&port->lock, irqflags);
|
|
}
|
|
|
|
static inline void rza1_pin_set(struct rza1_port *port, unsigned int pin,
|
|
unsigned int value)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&port->lock, irqflags);
|
|
rza1_set_bit(port, RZA1_P_REG, pin, !!value);
|
|
spin_unlock_irqrestore(&port->lock, irqflags);
|
|
}
|
|
|
|
static inline int rza1_pin_get(struct rza1_port *port, unsigned int pin)
|
|
{
|
|
return rza1_get_bit(port, RZA1_PPR_REG, pin);
|
|
}
|
|
|
|
/**
|
|
* rza1_pin_mux_single() - configure pin multiplexing on a single pin
|
|
*
|
|
* @pinctrl: RZ/A1 pin controller device
|
|
* @mux_conf: pin multiplexing descriptor
|
|
*/
|
|
static int rza1_pin_mux_single(struct rza1_pinctrl *rza1_pctl,
|
|
struct rza1_mux_conf *mux_conf)
|
|
{
|
|
struct rza1_port *port = &rza1_pctl->ports[mux_conf->port];
|
|
unsigned int pin = mux_conf->pin;
|
|
u8 mux_func = mux_conf->mux_func;
|
|
u8 mux_flags = mux_conf->mux_flags;
|
|
u8 mux_flags_from_table;
|
|
|
|
rza1_pin_reset(port, pin);
|
|
|
|
/* SWIO pinmux flags coming from DT are high precedence */
|
|
mux_flags_from_table = rza1_pinmux_get_flags(port->id, pin, mux_func,
|
|
rza1_pctl);
|
|
if (mux_flags)
|
|
mux_flags |= (mux_flags_from_table & MUX_FLAGS_BIDIR);
|
|
else
|
|
mux_flags = mux_flags_from_table;
|
|
|
|
if (mux_flags & MUX_FLAGS_BIDIR)
|
|
rza1_set_bit(port, RZA1_PBDC_REG, pin, 1);
|
|
|
|
/*
|
|
* Enable alternate function mode and select it.
|
|
*
|
|
* Be careful here: the pin mux sub-nodes in device tree
|
|
* enumerate alternate functions from 1 to 8;
|
|
* subtract 1 before using macros to match registers configuration
|
|
* which expects numbers from 0 to 7 instead.
|
|
*
|
|
* ----------------------------------------------------
|
|
* Alternate mode selection table:
|
|
*
|
|
* PMC PFC PFCE PFCAE (mux_func - 1)
|
|
* 1 0 0 0 0
|
|
* 1 1 0 0 1
|
|
* 1 0 1 0 2
|
|
* 1 1 1 0 3
|
|
* 1 0 0 1 4
|
|
* 1 1 0 1 5
|
|
* 1 0 1 1 6
|
|
* 1 1 1 1 7
|
|
* ----------------------------------------------------
|
|
*/
|
|
mux_func -= 1;
|
|
rza1_set_bit(port, RZA1_PFC_REG, pin, mux_func & MUX_FUNC_PFC_MASK);
|
|
rza1_set_bit(port, RZA1_PFCE_REG, pin, mux_func & MUX_FUNC_PFCE_MASK);
|
|
rza1_set_bit(port, RZA1_PFCEA_REG, pin, mux_func & MUX_FUNC_PFCEA_MASK);
|
|
|
|
/*
|
|
* All alternate functions except a few need PIPCn = 1.
|
|
* If PIPCn has to stay disabled (SW IO mode), configure PMn according
|
|
* to I/O direction specified by pin configuration -after- PMC has been
|
|
* set to one.
|
|
*/
|
|
if (mux_flags & (MUX_FLAGS_SWIO_INPUT | MUX_FLAGS_SWIO_OUTPUT))
|
|
rza1_set_bit(port, RZA1_PM_REG, pin,
|
|
mux_flags & MUX_FLAGS_SWIO_INPUT);
|
|
else
|
|
rza1_set_bit(port, RZA1_PIPC_REG, pin, 1);
|
|
|
|
rza1_set_bit(port, RZA1_PMC_REG, pin, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* gpio operations
|
|
*/
|
|
|
|
/**
|
|
* rza1_gpio_request() - configure pin in port mode
|
|
*
|
|
* Configure a pin as gpio (port mode).
|
|
* After reset, the pin is in input mode with input buffer disabled.
|
|
* To use the pin as input or output, set_direction shall be called first
|
|
*
|
|
* @chip: gpio chip where the gpio sits on
|
|
* @gpio: gpio offset
|
|
*/
|
|
static int rza1_gpio_request(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
rza1_pin_reset(port, gpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rza1_gpio_disable_free() - reset a pin
|
|
*
|
|
* Surprisingly, disable_free a gpio, is equivalent to request it.
|
|
* Reset pin to port mode, with input buffer disabled. This overwrites all
|
|
* port direction settings applied with set_direction
|
|
*
|
|
* @chip: gpio chip where the gpio sits on
|
|
* @gpio: gpio offset
|
|
*/
|
|
static void rza1_gpio_free(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
rza1_pin_reset(port, gpio);
|
|
}
|
|
|
|
static int rza1_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
return !!rza1_get_bit(port, RZA1_PM_REG, gpio);
|
|
}
|
|
|
|
static int rza1_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int gpio)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
rza1_pin_set_direction(port, gpio, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rza1_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int gpio,
|
|
int value)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
/* Set value before driving pin direction */
|
|
rza1_pin_set(port, gpio, value);
|
|
rza1_pin_set_direction(port, gpio, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rza1_gpio_get() - read a gpio pin value
|
|
*
|
|
* Read gpio pin value through PPR register.
|
|
* Requires bi-directional mode to work when reading the value of a pin
|
|
* in output mode
|
|
*
|
|
* @chip: gpio chip where the gpio sits on
|
|
* @gpio: gpio offset
|
|
*/
|
|
static int rza1_gpio_get(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
return rza1_pin_get(port, gpio);
|
|
}
|
|
|
|
static void rza1_gpio_set(struct gpio_chip *chip, unsigned int gpio,
|
|
int value)
|
|
{
|
|
struct rza1_port *port = gpiochip_get_data(chip);
|
|
|
|
rza1_pin_set(port, gpio, value);
|
|
}
|
|
|
|
static const struct gpio_chip rza1_gpiochip_template = {
|
|
.request = rza1_gpio_request,
|
|
.free = rza1_gpio_free,
|
|
.get_direction = rza1_gpio_get_direction,
|
|
.direction_input = rza1_gpio_direction_input,
|
|
.direction_output = rza1_gpio_direction_output,
|
|
.get = rza1_gpio_get,
|
|
.set = rza1_gpio_set,
|
|
};
|
|
/* ----------------------------------------------------------------------------
|
|
* pinctrl operations
|
|
*/
|
|
|
|
/**
|
|
* rza1_dt_node_pin_count() - Count number of pins in a dt node or in all its
|
|
* children sub-nodes
|
|
*
|
|
* @np: device tree node to parse
|
|
*/
|
|
static int rza1_dt_node_pin_count(struct device_node *np)
|
|
{
|
|
struct device_node *child;
|
|
struct property *of_pins;
|
|
unsigned int npins;
|
|
|
|
of_pins = of_find_property(np, "pinmux", NULL);
|
|
if (of_pins)
|
|
return of_pins->length / sizeof(u32);
|
|
|
|
npins = 0;
|
|
for_each_child_of_node(np, child) {
|
|
of_pins = of_find_property(child, "pinmux", NULL);
|
|
if (!of_pins) {
|
|
of_node_put(child);
|
|
return -EINVAL;
|
|
}
|
|
|
|
npins += of_pins->length / sizeof(u32);
|
|
}
|
|
|
|
return npins;
|
|
}
|
|
|
|
/**
|
|
* rza1_parse_pmx_function() - parse a pin mux sub-node
|
|
*
|
|
* @rza1_pctl: RZ/A1 pin controller device
|
|
* @np: of pmx sub-node
|
|
* @mux_confs: array of pin mux configurations to fill with parsed info
|
|
* @grpins: array of pin ids to mux
|
|
*/
|
|
static int rza1_parse_pinmux_node(struct rza1_pinctrl *rza1_pctl,
|
|
struct device_node *np,
|
|
struct rza1_mux_conf *mux_confs,
|
|
unsigned int *grpins)
|
|
{
|
|
struct pinctrl_dev *pctldev = rza1_pctl->pctl;
|
|
char const *prop_name = "pinmux";
|
|
unsigned long *pin_configs;
|
|
unsigned int npin_configs;
|
|
struct property *of_pins;
|
|
unsigned int npins;
|
|
u8 pinmux_flags;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
of_pins = of_find_property(np, prop_name, NULL);
|
|
if (!of_pins) {
|
|
dev_dbg(rza1_pctl->dev, "Missing %s property\n", prop_name);
|
|
return -ENOENT;
|
|
}
|
|
npins = of_pins->length / sizeof(u32);
|
|
|
|
/*
|
|
* Collect pin configuration properties: they apply to all pins in
|
|
* this sub-node
|
|
*/
|
|
ret = pinconf_generic_parse_dt_config(np, pctldev, &pin_configs,
|
|
&npin_configs);
|
|
if (ret) {
|
|
dev_err(rza1_pctl->dev,
|
|
"Unable to parse pin configuration options for %pOFn\n",
|
|
np);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Create a mask with pinmux flags from pin configuration;
|
|
* very few pins (TIOC[0-4][A|B|C|D] require SWIO direction
|
|
* specified in device tree.
|
|
*/
|
|
pinmux_flags = 0;
|
|
for (i = 0; i < npin_configs && pinmux_flags == 0; i++)
|
|
switch (pinconf_to_config_param(pin_configs[i])) {
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
pinmux_flags |= MUX_FLAGS_SWIO_INPUT;
|
|
break;
|
|
case PIN_CONFIG_OUTPUT:
|
|
pinmux_flags |= MUX_FLAGS_SWIO_OUTPUT;
|
|
default:
|
|
break;
|
|
|
|
}
|
|
|
|
kfree(pin_configs);
|
|
|
|
/* Collect pin positions and their mux settings. */
|
|
for (i = 0; i < npins; ++i) {
|
|
u32 of_pinconf;
|
|
struct rza1_mux_conf *mux_conf = &mux_confs[i];
|
|
|
|
ret = of_property_read_u32_index(np, prop_name, i, &of_pinconf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mux_conf->id = of_pinconf & MUX_PIN_ID_MASK;
|
|
mux_conf->port = RZA1_PIN_ID_TO_PORT(mux_conf->id);
|
|
mux_conf->pin = RZA1_PIN_ID_TO_PIN(mux_conf->id);
|
|
mux_conf->mux_func = MUX_FUNC(of_pinconf);
|
|
mux_conf->mux_flags = pinmux_flags;
|
|
|
|
if (mux_conf->port >= RZA1_NPORTS ||
|
|
mux_conf->pin >= RZA1_PINS_PER_PORT) {
|
|
dev_err(rza1_pctl->dev,
|
|
"Wrong port %u pin %u for %s property\n",
|
|
mux_conf->port, mux_conf->pin, prop_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
grpins[i] = mux_conf->id;
|
|
}
|
|
|
|
return npins;
|
|
}
|
|
|
|
/**
|
|
* rza1_dt_node_to_map() - map a pin mux node to a function/group
|
|
*
|
|
* Parse and register a pin mux function.
|
|
*
|
|
* @pctldev: pin controller device
|
|
* @np: device tree node to parse
|
|
* @map: pointer to pin map (output)
|
|
* @num_maps: number of collected maps (output)
|
|
*/
|
|
static int rza1_dt_node_to_map(struct pinctrl_dev *pctldev,
|
|
struct device_node *np,
|
|
struct pinctrl_map **map,
|
|
unsigned int *num_maps)
|
|
{
|
|
struct rza1_pinctrl *rza1_pctl = pinctrl_dev_get_drvdata(pctldev);
|
|
struct rza1_mux_conf *mux_confs, *mux_conf;
|
|
unsigned int *grpins, *grpin;
|
|
struct device_node *child;
|
|
const char *grpname;
|
|
const char **fngrps;
|
|
int ret, npins;
|
|
int gsel, fsel;
|
|
|
|
npins = rza1_dt_node_pin_count(np);
|
|
if (npins < 0) {
|
|
dev_err(rza1_pctl->dev, "invalid pinmux node structure\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Functions are made of 1 group only;
|
|
* in fact, functions and groups are identical for this pin controller
|
|
* except that functions carry an array of per-pin mux configuration
|
|
* settings.
|
|
*/
|
|
mux_confs = devm_kcalloc(rza1_pctl->dev, npins, sizeof(*mux_confs),
|
|
GFP_KERNEL);
|
|
grpins = devm_kcalloc(rza1_pctl->dev, npins, sizeof(*grpins),
|
|
GFP_KERNEL);
|
|
fngrps = devm_kzalloc(rza1_pctl->dev, sizeof(*fngrps), GFP_KERNEL);
|
|
|
|
if (!mux_confs || !grpins || !fngrps)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Parse the pinmux node.
|
|
* If the node does not contain "pinmux" property (-ENOENT)
|
|
* that property shall be specified in all its children sub-nodes.
|
|
*/
|
|
mux_conf = &mux_confs[0];
|
|
grpin = &grpins[0];
|
|
|
|
ret = rza1_parse_pinmux_node(rza1_pctl, np, mux_conf, grpin);
|
|
if (ret == -ENOENT)
|
|
for_each_child_of_node(np, child) {
|
|
ret = rza1_parse_pinmux_node(rza1_pctl, child, mux_conf,
|
|
grpin);
|
|
if (ret < 0) {
|
|
of_node_put(child);
|
|
return ret;
|
|
}
|
|
|
|
grpin += ret;
|
|
mux_conf += ret;
|
|
}
|
|
else if (ret < 0)
|
|
return ret;
|
|
|
|
/* Register pin group and function name to pinctrl_generic */
|
|
grpname = np->name;
|
|
fngrps[0] = grpname;
|
|
|
|
mutex_lock(&rza1_pctl->mutex);
|
|
gsel = pinctrl_generic_add_group(pctldev, grpname, grpins, npins,
|
|
NULL);
|
|
if (gsel < 0) {
|
|
mutex_unlock(&rza1_pctl->mutex);
|
|
return gsel;
|
|
}
|
|
|
|
fsel = pinmux_generic_add_function(pctldev, grpname, fngrps, 1,
|
|
mux_confs);
|
|
if (fsel < 0) {
|
|
ret = fsel;
|
|
goto remove_group;
|
|
}
|
|
|
|
dev_info(rza1_pctl->dev, "Parsed function and group %s with %d pins\n",
|
|
grpname, npins);
|
|
|
|
/* Create map where to retrieve function and mux settings from */
|
|
*num_maps = 0;
|
|
*map = kzalloc(sizeof(**map), GFP_KERNEL);
|
|
if (!*map) {
|
|
ret = -ENOMEM;
|
|
goto remove_function;
|
|
}
|
|
|
|
(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
|
|
(*map)->data.mux.group = np->name;
|
|
(*map)->data.mux.function = np->name;
|
|
*num_maps = 1;
|
|
mutex_unlock(&rza1_pctl->mutex);
|
|
|
|
return 0;
|
|
|
|
remove_function:
|
|
pinmux_generic_remove_function(pctldev, fsel);
|
|
|
|
remove_group:
|
|
pinctrl_generic_remove_group(pctldev, gsel);
|
|
mutex_unlock(&rza1_pctl->mutex);
|
|
|
|
dev_info(rza1_pctl->dev, "Unable to parse function and group %s\n",
|
|
grpname);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rza1_dt_free_map(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_map *map, unsigned int num_maps)
|
|
{
|
|
kfree(map);
|
|
}
|
|
|
|
static const struct pinctrl_ops rza1_pinctrl_ops = {
|
|
.get_groups_count = pinctrl_generic_get_group_count,
|
|
.get_group_name = pinctrl_generic_get_group_name,
|
|
.get_group_pins = pinctrl_generic_get_group_pins,
|
|
.dt_node_to_map = rza1_dt_node_to_map,
|
|
.dt_free_map = rza1_dt_free_map,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* pinmux operations
|
|
*/
|
|
|
|
/**
|
|
* rza1_set_mux() - retrieve pins from a group and apply their mux settings
|
|
*
|
|
* @pctldev: pin controller device
|
|
* @selector: function selector
|
|
* @group: group selector
|
|
*/
|
|
static int rza1_set_mux(struct pinctrl_dev *pctldev, unsigned int selector,
|
|
unsigned int group)
|
|
{
|
|
struct rza1_pinctrl *rza1_pctl = pinctrl_dev_get_drvdata(pctldev);
|
|
struct rza1_mux_conf *mux_confs;
|
|
struct function_desc *func;
|
|
struct group_desc *grp;
|
|
int i;
|
|
|
|
grp = pinctrl_generic_get_group(pctldev, group);
|
|
if (!grp)
|
|
return -EINVAL;
|
|
|
|
func = pinmux_generic_get_function(pctldev, selector);
|
|
if (!func)
|
|
return -EINVAL;
|
|
|
|
mux_confs = (struct rza1_mux_conf *)func->data;
|
|
for (i = 0; i < grp->num_pins; ++i) {
|
|
int ret;
|
|
|
|
ret = rza1_pin_mux_single(rza1_pctl, &mux_confs[i]);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinmux_ops rza1_pinmux_ops = {
|
|
.get_functions_count = pinmux_generic_get_function_count,
|
|
.get_function_name = pinmux_generic_get_function_name,
|
|
.get_function_groups = pinmux_generic_get_function_groups,
|
|
.set_mux = rza1_set_mux,
|
|
.strict = true,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* RZ/A1 pin controller driver operations
|
|
*/
|
|
|
|
static unsigned int rza1_count_gpio_chips(struct device_node *np)
|
|
{
|
|
struct device_node *child;
|
|
unsigned int count = 0;
|
|
|
|
for_each_child_of_node(np, child) {
|
|
if (!of_property_read_bool(child, "gpio-controller"))
|
|
continue;
|
|
|
|
count++;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
/**
|
|
* rza1_parse_gpiochip() - parse and register a gpio chip and pin range
|
|
*
|
|
* The gpio controller subnode shall provide a "gpio-ranges" list property as
|
|
* defined by gpio device tree binding documentation.
|
|
*
|
|
* @rza1_pctl: RZ/A1 pin controller device
|
|
* @np: of gpio-controller node
|
|
* @chip: gpio chip to register to gpiolib
|
|
* @range: pin range to register to pinctrl core
|
|
*/
|
|
static int rza1_parse_gpiochip(struct rza1_pinctrl *rza1_pctl,
|
|
struct device_node *np,
|
|
struct gpio_chip *chip,
|
|
struct pinctrl_gpio_range *range)
|
|
{
|
|
const char *list_name = "gpio-ranges";
|
|
struct of_phandle_args of_args;
|
|
unsigned int gpioport;
|
|
u32 pinctrl_base;
|
|
int ret;
|
|
|
|
ret = of_parse_phandle_with_fixed_args(np, list_name, 3, 0, &of_args);
|
|
if (ret) {
|
|
dev_err(rza1_pctl->dev, "Unable to parse %s list property\n",
|
|
list_name);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Find out on which port this gpio-chip maps to by inspecting the
|
|
* second argument of the "gpio-ranges" property.
|
|
*/
|
|
pinctrl_base = of_args.args[1];
|
|
gpioport = RZA1_PIN_ID_TO_PORT(pinctrl_base);
|
|
if (gpioport >= RZA1_NPORTS) {
|
|
dev_err(rza1_pctl->dev,
|
|
"Invalid values in property %s\n", list_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
*chip = rza1_gpiochip_template;
|
|
chip->base = -1;
|
|
chip->label = devm_kasprintf(rza1_pctl->dev, GFP_KERNEL, "%pOFn",
|
|
np);
|
|
if (!chip->label)
|
|
return -ENOMEM;
|
|
|
|
chip->ngpio = of_args.args[2];
|
|
chip->of_node = np;
|
|
chip->parent = rza1_pctl->dev;
|
|
|
|
range->id = gpioport;
|
|
range->name = chip->label;
|
|
range->pin_base = range->base = pinctrl_base;
|
|
range->npins = of_args.args[2];
|
|
range->gc = chip;
|
|
|
|
ret = devm_gpiochip_add_data(rza1_pctl->dev, chip,
|
|
&rza1_pctl->ports[gpioport]);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pinctrl_add_gpio_range(rza1_pctl->pctl, range);
|
|
|
|
dev_info(rza1_pctl->dev, "Parsed gpiochip %s with %d pins\n",
|
|
chip->label, chip->ngpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rza1_gpio_register() - parse DT to collect gpio-chips and gpio-ranges
|
|
*
|
|
* @rza1_pctl: RZ/A1 pin controller device
|
|
*/
|
|
static int rza1_gpio_register(struct rza1_pinctrl *rza1_pctl)
|
|
{
|
|
struct device_node *np = rza1_pctl->dev->of_node;
|
|
struct pinctrl_gpio_range *gpio_ranges;
|
|
struct gpio_chip *gpio_chips;
|
|
struct device_node *child;
|
|
unsigned int ngpiochips;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
ngpiochips = rza1_count_gpio_chips(np);
|
|
if (ngpiochips == 0) {
|
|
dev_dbg(rza1_pctl->dev, "No gpiochip registered\n");
|
|
return 0;
|
|
}
|
|
|
|
gpio_chips = devm_kcalloc(rza1_pctl->dev, ngpiochips,
|
|
sizeof(*gpio_chips), GFP_KERNEL);
|
|
gpio_ranges = devm_kcalloc(rza1_pctl->dev, ngpiochips,
|
|
sizeof(*gpio_ranges), GFP_KERNEL);
|
|
if (!gpio_chips || !gpio_ranges)
|
|
return -ENOMEM;
|
|
|
|
i = 0;
|
|
for_each_child_of_node(np, child) {
|
|
if (!of_property_read_bool(child, "gpio-controller"))
|
|
continue;
|
|
|
|
ret = rza1_parse_gpiochip(rza1_pctl, child, &gpio_chips[i],
|
|
&gpio_ranges[i]);
|
|
if (ret) {
|
|
of_node_put(child);
|
|
return ret;
|
|
}
|
|
|
|
++i;
|
|
}
|
|
|
|
dev_info(rza1_pctl->dev, "Registered %u gpio controllers\n", i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rza1_pinctrl_register() - Enumerate pins, ports and gpiochips; register
|
|
* them to pinctrl and gpio cores.
|
|
*
|
|
* @rza1_pctl: RZ/A1 pin controller device
|
|
*/
|
|
static int rza1_pinctrl_register(struct rza1_pinctrl *rza1_pctl)
|
|
{
|
|
struct pinctrl_pin_desc *pins;
|
|
struct rza1_port *ports;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
pins = devm_kcalloc(rza1_pctl->dev, RZA1_NPINS, sizeof(*pins),
|
|
GFP_KERNEL);
|
|
ports = devm_kcalloc(rza1_pctl->dev, RZA1_NPORTS, sizeof(*ports),
|
|
GFP_KERNEL);
|
|
if (!pins || !ports)
|
|
return -ENOMEM;
|
|
|
|
rza1_pctl->pins = pins;
|
|
rza1_pctl->desc.pins = pins;
|
|
rza1_pctl->desc.npins = RZA1_NPINS;
|
|
rza1_pctl->ports = ports;
|
|
|
|
for (i = 0; i < RZA1_NPINS; ++i) {
|
|
unsigned int pin = RZA1_PIN_ID_TO_PIN(i);
|
|
unsigned int port = RZA1_PIN_ID_TO_PORT(i);
|
|
|
|
pins[i].number = i;
|
|
pins[i].name = devm_kasprintf(rza1_pctl->dev, GFP_KERNEL,
|
|
"P%u-%u", port, pin);
|
|
if (!pins[i].name)
|
|
return -ENOMEM;
|
|
|
|
if (i % RZA1_PINS_PER_PORT == 0) {
|
|
/*
|
|
* Setup ports;
|
|
* they provide per-port lock and logical base address.
|
|
*/
|
|
unsigned int port_id = RZA1_PIN_ID_TO_PORT(i);
|
|
|
|
ports[port_id].id = port_id;
|
|
ports[port_id].base = rza1_pctl->base;
|
|
ports[port_id].pins = &pins[i];
|
|
spin_lock_init(&ports[port_id].lock);
|
|
}
|
|
}
|
|
|
|
ret = devm_pinctrl_register_and_init(rza1_pctl->dev, &rza1_pctl->desc,
|
|
rza1_pctl, &rza1_pctl->pctl);
|
|
if (ret) {
|
|
dev_err(rza1_pctl->dev,
|
|
"RZ/A1 pin controller registration failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = pinctrl_enable(rza1_pctl->pctl);
|
|
if (ret) {
|
|
dev_err(rza1_pctl->dev,
|
|
"RZ/A1 pin controller failed to start\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = rza1_gpio_register(rza1_pctl);
|
|
if (ret) {
|
|
dev_err(rza1_pctl->dev, "RZ/A1 GPIO registration failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rza1_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct rza1_pinctrl *rza1_pctl;
|
|
int ret;
|
|
|
|
rza1_pctl = devm_kzalloc(&pdev->dev, sizeof(*rza1_pctl), GFP_KERNEL);
|
|
if (!rza1_pctl)
|
|
return -ENOMEM;
|
|
|
|
rza1_pctl->dev = &pdev->dev;
|
|
|
|
rza1_pctl->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(rza1_pctl->base))
|
|
return PTR_ERR(rza1_pctl->base);
|
|
|
|
mutex_init(&rza1_pctl->mutex);
|
|
|
|
platform_set_drvdata(pdev, rza1_pctl);
|
|
|
|
rza1_pctl->desc.name = DRIVER_NAME;
|
|
rza1_pctl->desc.pctlops = &rza1_pinctrl_ops;
|
|
rza1_pctl->desc.pmxops = &rza1_pinmux_ops;
|
|
rza1_pctl->desc.owner = THIS_MODULE;
|
|
rza1_pctl->data = of_device_get_match_data(&pdev->dev);
|
|
|
|
ret = rza1_pinctrl_register(rza1_pctl);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_info(&pdev->dev,
|
|
"RZ/A1 pin controller and gpio successfully registered\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id rza1_pinctrl_of_match[] = {
|
|
{
|
|
/* RZ/A1H, RZ/A1M */
|
|
.compatible = "renesas,r7s72100-ports",
|
|
.data = &rza1h_pmx_conf,
|
|
},
|
|
{
|
|
/* RZ/A1L */
|
|
.compatible = "renesas,r7s72102-ports",
|
|
.data = &rza1l_pmx_conf,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver rza1_pinctrl_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = rza1_pinctrl_of_match,
|
|
},
|
|
.probe = rza1_pinctrl_probe,
|
|
};
|
|
|
|
static int __init rza1_pinctrl_init(void)
|
|
{
|
|
return platform_driver_register(&rza1_pinctrl_driver);
|
|
}
|
|
core_initcall(rza1_pinctrl_init);
|
|
|
|
MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org");
|
|
MODULE_DESCRIPTION("Pin and gpio controller driver for Reneas RZ/A1 SoC");
|
|
MODULE_LICENSE("GPL v2");
|