mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 13:16:39 +07:00
dc0827c128
Add PID 0x6015, corresponding to the new series of FT-X chips (FT220XD, FT201X, FT220X, FT221X, FT230X, FT231X, FT240X). They all appear as serial devices, and seem indistinguishable except for the default product string stored in their EEPROM. The baudrate generation matches FT232RL devices. Tested with a FT201X and FT230X at various baudrates (100 - 3000000). Sample dmesg: ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver usb 2-1: new full-speed USB device number 6 using ohci_hcd usb 2-1: New USB device found, idVendor=0403, idProduct=6015 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: FT230X USB Half UART usb 2-1: Manufacturer: FTDI usb 2-1: SerialNumber: DC001WI6 ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: ftdi_sio_port_probe drivers/usb/serial/ftdi_sio.c: ftdi_determine_type: bcdDevice = 0x1000, bNumInterfaces = 1 usb 2-1: Detected FT-X usb 2-1: Number of endpoints 2 usb 2-1: Endpoint 1 MaxPacketSize 64 usb 2-1: Endpoint 2 MaxPacketSize 64 usb 2-1: Setting MaxPacketSize 64 drivers/usb/serial/ftdi_sio.c: read_latency_timer drivers/usb/serial/ftdi_sio.c: write_latency_timer: setting latency timer = 1 drivers/usb/serial/ftdi_sio.c: create_sysfs_attrs drivers/usb/serial/ftdi_sio.c: sysfs attributes for FT-X usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0 Signed-off-by: Jim Paris <jim@jtan.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
565 lines
17 KiB
C
565 lines
17 KiB
C
/*
|
|
* Driver definitions for the FTDI USB Single Port Serial Converter -
|
|
* known as FTDI_SIO (Serial Input/Output application of the chipset)
|
|
*
|
|
* For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h
|
|
*
|
|
*
|
|
* The example I have is known as the USC-1000 which is available from
|
|
* http://www.dse.co.nz - cat no XH4214 It looks similar to this:
|
|
* http://www.dansdata.com/usbser.htm but I can't be sure There are other
|
|
* USC-1000s which don't look like my device though so beware!
|
|
*
|
|
* The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
|
|
* USB on the other.
|
|
*
|
|
* Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details
|
|
* of the protocol required to talk to the device and ongoing assistence
|
|
* during development.
|
|
*
|
|
* Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
|
|
* FTDI_SIO implementation.
|
|
*
|
|
*/
|
|
|
|
/* Commands */
|
|
#define FTDI_SIO_RESET 0 /* Reset the port */
|
|
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
|
|
#define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */
|
|
#define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */
|
|
#define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of
|
|
the port */
|
|
#define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modem
|
|
status register */
|
|
#define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */
|
|
#define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */
|
|
#define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */
|
|
#define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */
|
|
|
|
/* Interface indices for FT2232, FT2232H and FT4232H devices */
|
|
#define INTERFACE_A 1
|
|
#define INTERFACE_B 2
|
|
#define INTERFACE_C 3
|
|
#define INTERFACE_D 4
|
|
|
|
|
|
/*
|
|
* BmRequestType: 1100 0000b
|
|
* bRequest: FTDI_E2_READ
|
|
* wValue: 0
|
|
* wIndex: Address of word to read
|
|
* wLength: 2
|
|
* Data: Will return a word of data from E2Address
|
|
*
|
|
*/
|
|
|
|
/* Port Identifier Table */
|
|
#define PIT_DEFAULT 0 /* SIOA */
|
|
#define PIT_SIOA 1 /* SIOA */
|
|
/* The device this driver is tested with one has only one port */
|
|
#define PIT_SIOB 2 /* SIOB */
|
|
#define PIT_PARALLEL 3 /* Parallel */
|
|
|
|
/* FTDI_SIO_RESET */
|
|
#define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET
|
|
#define FTDI_SIO_RESET_REQUEST_TYPE 0x40
|
|
#define FTDI_SIO_RESET_SIO 0
|
|
#define FTDI_SIO_RESET_PURGE_RX 1
|
|
#define FTDI_SIO_RESET_PURGE_TX 2
|
|
|
|
/*
|
|
* BmRequestType: 0100 0000B
|
|
* bRequest: FTDI_SIO_RESET
|
|
* wValue: Control Value
|
|
* 0 = Reset SIO
|
|
* 1 = Purge RX buffer
|
|
* 2 = Purge TX buffer
|
|
* wIndex: Port
|
|
* wLength: 0
|
|
* Data: None
|
|
*
|
|
* The Reset SIO command has this effect:
|
|
*
|
|
* Sets flow control set to 'none'
|
|
* Event char = $0D
|
|
* Event trigger = disabled
|
|
* Purge RX buffer
|
|
* Purge TX buffer
|
|
* Clear DTR
|
|
* Clear RTS
|
|
* baud and data format not reset
|
|
*
|
|
* The Purge RX and TX buffer commands affect nothing except the buffers
|
|
*
|
|
*/
|
|
|
|
/* FTDI_SIO_SET_BAUDRATE */
|
|
#define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40
|
|
#define FTDI_SIO_SET_BAUDRATE_REQUEST 3
|
|
|
|
/*
|
|
* BmRequestType: 0100 0000B
|
|
* bRequest: FTDI_SIO_SET_BAUDRATE
|
|
* wValue: BaudDivisor value - see below
|
|
* wIndex: Port
|
|
* wLength: 0
|
|
* Data: None
|
|
* The BaudDivisor values are calculated as follows:
|
|
* - BaseClock is either 12000000 or 48000000 depending on the device.
|
|
* FIXME: I wish I knew how to detect old chips to select proper base clock!
|
|
* - BaudDivisor is a fixed point number encoded in a funny way.
|
|
* (--WRONG WAY OF THINKING--)
|
|
* BaudDivisor is a fixed point number encoded with following bit weighs:
|
|
* (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
|
|
* end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
|
|
* (--THE REALITY--)
|
|
* The both-bits-set has quite different meaning from 0.75 - the chip
|
|
* designers have decided it to mean 0.125 instead of 0.75.
|
|
* This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
|
|
* and Flow Control Consideration for USB to RS232".
|
|
* - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
|
|
* automagically re-encode the resulting value to take fractions into
|
|
* consideration.
|
|
* As all values are integers, some bit twiddling is in order:
|
|
* BaudDivisor = (BaseClock / 16 / BaudRate) |
|
|
* (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5
|
|
* : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25
|
|
* : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125
|
|
* : 0)
|
|
*
|
|
* For the FT232BM, a 17th divisor bit was introduced to encode the multiples
|
|
* of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows
|
|
* (the first four codes are the same as for the FT8U232AM, where bit 16 is
|
|
* always 0):
|
|
* 000 - add .000 to divisor
|
|
* 001 - add .500 to divisor
|
|
* 010 - add .250 to divisor
|
|
* 011 - add .125 to divisor
|
|
* 100 - add .375 to divisor
|
|
* 101 - add .625 to divisor
|
|
* 110 - add .750 to divisor
|
|
* 111 - add .875 to divisor
|
|
* Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is
|
|
* placed in bit 0 of the urb index.
|
|
*
|
|
* Note that there are a couple of special cases to support the highest baud
|
|
* rates. If the calculated divisor value is 1, this needs to be replaced with
|
|
* 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001
|
|
* (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is
|
|
* not supported by the FT8U232AM).
|
|
*/
|
|
|
|
enum ftdi_chip_type {
|
|
SIO = 1,
|
|
FT8U232AM = 2,
|
|
FT232BM = 3,
|
|
FT2232C = 4,
|
|
FT232RL = 5,
|
|
FT2232H = 6,
|
|
FT4232H = 7,
|
|
FT232H = 8,
|
|
FTX = 9,
|
|
};
|
|
|
|
enum ftdi_sio_baudrate {
|
|
ftdi_sio_b300 = 0,
|
|
ftdi_sio_b600 = 1,
|
|
ftdi_sio_b1200 = 2,
|
|
ftdi_sio_b2400 = 3,
|
|
ftdi_sio_b4800 = 4,
|
|
ftdi_sio_b9600 = 5,
|
|
ftdi_sio_b19200 = 6,
|
|
ftdi_sio_b38400 = 7,
|
|
ftdi_sio_b57600 = 8,
|
|
ftdi_sio_b115200 = 9
|
|
};
|
|
|
|
/*
|
|
* The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor
|
|
* values are calculated internally.
|
|
*/
|
|
#define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
|
|
#define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
|
|
#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8)
|
|
#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8)
|
|
#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8)
|
|
#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8)
|
|
#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8)
|
|
#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11)
|
|
#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11)
|
|
#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11)
|
|
#define FTDI_SIO_SET_BREAK (0x1 << 14)
|
|
/* FTDI_SIO_SET_DATA */
|
|
|
|
/*
|
|
* BmRequestType: 0100 0000B
|
|
* bRequest: FTDI_SIO_SET_DATA
|
|
* wValue: Data characteristics (see below)
|
|
* wIndex: Port
|
|
* wLength: 0
|
|
* Data: No
|
|
*
|
|
* Data characteristics
|
|
*
|
|
* B0..7 Number of data bits
|
|
* B8..10 Parity
|
|
* 0 = None
|
|
* 1 = Odd
|
|
* 2 = Even
|
|
* 3 = Mark
|
|
* 4 = Space
|
|
* B11..13 Stop Bits
|
|
* 0 = 1
|
|
* 1 = 1.5
|
|
* 2 = 2
|
|
* B14
|
|
* 1 = TX ON (break)
|
|
* 0 = TX OFF (normal state)
|
|
* B15 Reserved
|
|
*
|
|
*/
|
|
|
|
|
|
|
|
/* FTDI_SIO_MODEM_CTRL */
|
|
#define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40
|
|
#define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL
|
|
|
|
/*
|
|
* BmRequestType: 0100 0000B
|
|
* bRequest: FTDI_SIO_MODEM_CTRL
|
|
* wValue: ControlValue (see below)
|
|
* wIndex: Port
|
|
* wLength: 0
|
|
* Data: None
|
|
*
|
|
* NOTE: If the device is in RTS/CTS flow control, the RTS set by this
|
|
* command will be IGNORED without an error being returned
|
|
* Also - you can not set DTR and RTS with one control message
|
|
*/
|
|
|
|
#define FTDI_SIO_SET_DTR_MASK 0x1
|
|
#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8))
|
|
#define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8))
|
|
#define FTDI_SIO_SET_RTS_MASK 0x2
|
|
#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8))
|
|
#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8))
|
|
|
|
/*
|
|
* ControlValue
|
|
* B0 DTR state
|
|
* 0 = reset
|
|
* 1 = set
|
|
* B1 RTS state
|
|
* 0 = reset
|
|
* 1 = set
|
|
* B2..7 Reserved
|
|
* B8 DTR state enable
|
|
* 0 = ignore
|
|
* 1 = use DTR state
|
|
* B9 RTS state enable
|
|
* 0 = ignore
|
|
* 1 = use RTS state
|
|
* B10..15 Reserved
|
|
*/
|
|
|
|
/* FTDI_SIO_SET_FLOW_CTRL */
|
|
#define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40
|
|
#define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL
|
|
#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0
|
|
#define FTDI_SIO_RTS_CTS_HS (0x1 << 8)
|
|
#define FTDI_SIO_DTR_DSR_HS (0x2 << 8)
|
|
#define FTDI_SIO_XON_XOFF_HS (0x4 << 8)
|
|
/*
|
|
* BmRequestType: 0100 0000b
|
|
* bRequest: FTDI_SIO_SET_FLOW_CTRL
|
|
* wValue: Xoff/Xon
|
|
* wIndex: Protocol/Port - hIndex is protocol / lIndex is port
|
|
* wLength: 0
|
|
* Data: None
|
|
*
|
|
* hIndex protocol is:
|
|
* B0 Output handshaking using RTS/CTS
|
|
* 0 = disabled
|
|
* 1 = enabled
|
|
* B1 Output handshaking using DTR/DSR
|
|
* 0 = disabled
|
|
* 1 = enabled
|
|
* B2 Xon/Xoff handshaking
|
|
* 0 = disabled
|
|
* 1 = enabled
|
|
*
|
|
* A value of zero in the hIndex field disables handshaking
|
|
*
|
|
* If Xon/Xoff handshaking is specified, the hValue field should contain the
|
|
* XOFF character and the lValue field contains the XON character.
|
|
*/
|
|
|
|
/*
|
|
* FTDI_SIO_GET_LATENCY_TIMER
|
|
*
|
|
* Set the timeout interval. The FTDI collects data from the slave
|
|
* device, transmitting it to the host when either A) 62 bytes are
|
|
* received, or B) the timeout interval has elapsed and the buffer
|
|
* contains at least 1 byte. Setting this value to a small number
|
|
* can dramatically improve performance for applications which send
|
|
* small packets, since the default value is 16ms.
|
|
*/
|
|
#define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER
|
|
#define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0
|
|
|
|
/*
|
|
* BmRequestType: 1100 0000b
|
|
* bRequest: FTDI_SIO_GET_LATENCY_TIMER
|
|
* wValue: 0
|
|
* wIndex: Port
|
|
* wLength: 0
|
|
* Data: latency (on return)
|
|
*/
|
|
|
|
/*
|
|
* FTDI_SIO_SET_LATENCY_TIMER
|
|
*
|
|
* Set the timeout interval. The FTDI collects data from the slave
|
|
* device, transmitting it to the host when either A) 62 bytes are
|
|
* received, or B) the timeout interval has elapsed and the buffer
|
|
* contains at least 1 byte. Setting this value to a small number
|
|
* can dramatically improve performance for applications which send
|
|
* small packets, since the default value is 16ms.
|
|
*/
|
|
#define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER
|
|
#define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40
|
|
|
|
/*
|
|
* BmRequestType: 0100 0000b
|
|
* bRequest: FTDI_SIO_SET_LATENCY_TIMER
|
|
* wValue: Latency (milliseconds)
|
|
* wIndex: Port
|
|
* wLength: 0
|
|
* Data: None
|
|
*
|
|
* wValue:
|
|
* B0..7 Latency timer
|
|
* B8..15 0
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* FTDI_SIO_SET_EVENT_CHAR
|
|
*
|
|
* Set the special event character for the specified communications port.
|
|
* If the device sees this character it will immediately return the
|
|
* data read so far - rather than wait 40ms or until 62 bytes are read
|
|
* which is what normally happens.
|
|
*/
|
|
|
|
|
|
#define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR
|
|
#define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40
|
|
|
|
|
|
/*
|
|
* BmRequestType: 0100 0000b
|
|
* bRequest: FTDI_SIO_SET_EVENT_CHAR
|
|
* wValue: EventChar
|
|
* wIndex: Port
|
|
* wLength: 0
|
|
* Data: None
|
|
*
|
|
* wValue:
|
|
* B0..7 Event Character
|
|
* B8 Event Character Processing
|
|
* 0 = disabled
|
|
* 1 = enabled
|
|
* B9..15 Reserved
|
|
*
|
|
*/
|
|
|
|
/* FTDI_SIO_SET_ERROR_CHAR */
|
|
|
|
/*
|
|
* Set the parity error replacement character for the specified communications
|
|
* port
|
|
*/
|
|
|
|
/*
|
|
* BmRequestType: 0100 0000b
|
|
* bRequest: FTDI_SIO_SET_EVENT_CHAR
|
|
* wValue: Error Char
|
|
* wIndex: Port
|
|
* wLength: 0
|
|
* Data: None
|
|
*
|
|
*Error Char
|
|
* B0..7 Error Character
|
|
* B8 Error Character Processing
|
|
* 0 = disabled
|
|
* 1 = enabled
|
|
* B9..15 Reserved
|
|
*
|
|
*/
|
|
|
|
/* FTDI_SIO_GET_MODEM_STATUS */
|
|
/* Retrieve the current value of the modem status register */
|
|
|
|
#define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0
|
|
#define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS
|
|
#define FTDI_SIO_CTS_MASK 0x10
|
|
#define FTDI_SIO_DSR_MASK 0x20
|
|
#define FTDI_SIO_RI_MASK 0x40
|
|
#define FTDI_SIO_RLSD_MASK 0x80
|
|
/*
|
|
* BmRequestType: 1100 0000b
|
|
* bRequest: FTDI_SIO_GET_MODEM_STATUS
|
|
* wValue: zero
|
|
* wIndex: Port
|
|
* wLength: 1
|
|
* Data: Status
|
|
*
|
|
* One byte of data is returned
|
|
* B0..3 0
|
|
* B4 CTS
|
|
* 0 = inactive
|
|
* 1 = active
|
|
* B5 DSR
|
|
* 0 = inactive
|
|
* 1 = active
|
|
* B6 Ring Indicator (RI)
|
|
* 0 = inactive
|
|
* 1 = active
|
|
* B7 Receive Line Signal Detect (RLSD)
|
|
* 0 = inactive
|
|
* 1 = active
|
|
*/
|
|
|
|
|
|
|
|
/* Descriptors returned by the device
|
|
*
|
|
* Device Descriptor
|
|
*
|
|
* Offset Field Size Value Description
|
|
* 0 bLength 1 0x12 Size of descriptor in bytes
|
|
* 1 bDescriptorType 1 0x01 DEVICE Descriptor Type
|
|
* 2 bcdUSB 2 0x0110 USB Spec Release Number
|
|
* 4 bDeviceClass 1 0x00 Class Code
|
|
* 5 bDeviceSubClass 1 0x00 SubClass Code
|
|
* 6 bDeviceProtocol 1 0x00 Protocol Code
|
|
* 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0
|
|
* 8 idVendor 2 0x0403 Vendor ID
|
|
* 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID)
|
|
* 12 bcdDevice 2 0x0001 Device release number
|
|
* 14 iManufacturer 1 0x01 Index of man. string desc
|
|
* 15 iProduct 1 0x02 Index of prod string desc
|
|
* 16 iSerialNumber 1 0x02 Index of serial nmr string desc
|
|
* 17 bNumConfigurations 1 0x01 Number of possible configurations
|
|
*
|
|
* Configuration Descriptor
|
|
*
|
|
* Offset Field Size Value
|
|
* 0 bLength 1 0x09 Size of descriptor in bytes
|
|
* 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type
|
|
* 2 wTotalLength 2 0x0020 Total length of data
|
|
* 4 bNumInterfaces 1 0x01 Number of interfaces supported
|
|
* 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req
|
|
* 6 iConfiguration 1 0x02 Index of config string descriptor
|
|
* 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup
|
|
* 8 MaxPower 1 0x1E Max power consumption
|
|
*
|
|
* Interface Descriptor
|
|
*
|
|
* Offset Field Size Value
|
|
* 0 bLength 1 0x09 Size of descriptor in bytes
|
|
* 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type
|
|
* 2 bInterfaceNumber 1 0x00 Number of interface
|
|
* 3 bAlternateSetting 1 0x00 Value used to select alternate
|
|
* 4 bNumEndpoints 1 0x02 Number of endpoints
|
|
* 5 bInterfaceClass 1 0xFF Class Code
|
|
* 6 bInterfaceSubClass 1 0xFF Subclass Code
|
|
* 7 bInterfaceProtocol 1 0xFF Protocol Code
|
|
* 8 iInterface 1 0x02 Index of interface string description
|
|
*
|
|
* IN Endpoint Descriptor
|
|
*
|
|
* Offset Field Size Value
|
|
* 0 bLength 1 0x07 Size of descriptor in bytes
|
|
* 1 bDescriptorType 1 0x05 ENDPOINT descriptor type
|
|
* 2 bEndpointAddress 1 0x82 Address of endpoint
|
|
* 3 bmAttributes 1 0x02 Endpoint attributes - Bulk
|
|
* 4 bNumEndpoints 2 0x0040 maximum packet size
|
|
* 5 bInterval 1 0x00 Interval for polling endpoint
|
|
*
|
|
* OUT Endpoint Descriptor
|
|
*
|
|
* Offset Field Size Value
|
|
* 0 bLength 1 0x07 Size of descriptor in bytes
|
|
* 1 bDescriptorType 1 0x05 ENDPOINT descriptor type
|
|
* 2 bEndpointAddress 1 0x02 Address of endpoint
|
|
* 3 bmAttributes 1 0x02 Endpoint attributes - Bulk
|
|
* 4 bNumEndpoints 2 0x0040 maximum packet size
|
|
* 5 bInterval 1 0x00 Interval for polling endpoint
|
|
*
|
|
* DATA FORMAT
|
|
*
|
|
* IN Endpoint
|
|
*
|
|
* The device reserves the first two bytes of data on this endpoint to contain
|
|
* the current values of the modem and line status registers. In the absence of
|
|
* data, the device generates a message consisting of these two status bytes
|
|
* every 40 ms
|
|
*
|
|
* Byte 0: Modem Status
|
|
*
|
|
* Offset Description
|
|
* B0 Reserved - must be 1
|
|
* B1 Reserved - must be 0
|
|
* B2 Reserved - must be 0
|
|
* B3 Reserved - must be 0
|
|
* B4 Clear to Send (CTS)
|
|
* B5 Data Set Ready (DSR)
|
|
* B6 Ring Indicator (RI)
|
|
* B7 Receive Line Signal Detect (RLSD)
|
|
*
|
|
* Byte 1: Line Status
|
|
*
|
|
* Offset Description
|
|
* B0 Data Ready (DR)
|
|
* B1 Overrun Error (OE)
|
|
* B2 Parity Error (PE)
|
|
* B3 Framing Error (FE)
|
|
* B4 Break Interrupt (BI)
|
|
* B5 Transmitter Holding Register (THRE)
|
|
* B6 Transmitter Empty (TEMT)
|
|
* B7 Error in RCVR FIFO
|
|
*
|
|
*/
|
|
#define FTDI_RS0_CTS (1 << 4)
|
|
#define FTDI_RS0_DSR (1 << 5)
|
|
#define FTDI_RS0_RI (1 << 6)
|
|
#define FTDI_RS0_RLSD (1 << 7)
|
|
|
|
#define FTDI_RS_DR 1
|
|
#define FTDI_RS_OE (1<<1)
|
|
#define FTDI_RS_PE (1<<2)
|
|
#define FTDI_RS_FE (1<<3)
|
|
#define FTDI_RS_BI (1<<4)
|
|
#define FTDI_RS_THRE (1<<5)
|
|
#define FTDI_RS_TEMT (1<<6)
|
|
#define FTDI_RS_FIFO (1<<7)
|
|
|
|
/*
|
|
* OUT Endpoint
|
|
*
|
|
* This device reserves the first bytes of data on this endpoint contain the
|
|
* length and port identifier of the message. For the FTDI USB Serial converter
|
|
* the port identifier is always 1.
|
|
*
|
|
* Byte 0: Line Status
|
|
*
|
|
* Offset Description
|
|
* B0 Reserved - must be 1
|
|
* B1 Reserved - must be 0
|
|
* B2..7 Length of message - (not including Byte 0)
|
|
*
|
|
*/
|