AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
0bf4b3fadb
linux_dsm_epyc7002/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
Linus Torvalds 74fee4e88f DeviceTree updates for 4.14: 
- Convert more DT code to use of_property_read_* API.
 
 - Improve DT overlay support when adding multiple overlays.
 
 - Convert printk's to %pOF format specifiers. Most went via subsystem
   trees, but picked up the remaining orphans.
 
 - Correct unittests to use preferred "okay" for "status" property value.
 
 - Add a KASLR seed property.
 
 - Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa.
 
 - Fix modalias buffer handling.
 
 - Clean-up of include paths for building dtbs.
 
 - Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10 devices.
 
 - Add nvmem bindings for MediaTek MT7623 and MT7622 SoC.
 
 - Add compatible string for Allwinner H5 Mali-450 GPU.
 
 - Fix links to old OpenFirmware docs with new mirror on devicetree.org.
 
 - Remove status property from binding doc examples.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJZsVkbEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcPWPhAA
 gi3Ekc3680YE1iLnXHkDkZHmzE0KvzhIyHrzqIkoxtISfmboVdydMQFnAfyhPJA4
 UA5vBKiL4uhWSpHglQpyY2ld+S9tym3IQrGEhEsHxf6njfQpkiNqVKsTYxGAmwxW
 E5B6sFl5O4q9e84pnselFsmx6TI+SlmPrqbN7BiluqczeUu358QlF2x8GZuJDN35
 cLJKZSeE/w2xLIRIpHUoh7My8/d3jJ/OxuqXFyt/f42BtGp++WganCQS5XR0dxSA
 SMdzHhWDTqCKsih5/80vqVXpDBn8iX6NEx7zKprSRc3mTCNIWHG70m/tNAk6/FQR
 gvMR3BJOiA0MOIO3M3qaJeVuFkJDixaXmwL0V/Qpuon+6EMdRIfgcVTScAXNnamP
 IHmN7fzFYE9tNCzkQjEHkQtVxyQi+1CAM61dZQD1rwi4M2YZHmNxdfLj4ilRb+q8
 2SDugUjz3tEdEzi6huKc5oGwqmJwLQmSlgP+VGcJnt6kotLy+PEdPK1cYWtwSKmp
 p/xhbXZSCFcwCHXGbyGE6yOXX4DKaLD11KmAMlJ2zwphfvwE4v/azuLmOtviiYTS
 23KGIEZJYwRP1QG/BwsjKhl7x37NeKKKHomryMVF3R7M0mf1VtcdSSYROirNi2+t
 AZZSyXoK8E/Fx4hR1YHxJ3TX4aBkJ2rBi3+RgABXa10=
 =IBAh
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "There's a few orphans in the conversion to %pOF printf specifiers
  included here that no one else picked up.

  Summary:

   - Convert more DT code to use of_property_read_* API.

   - Improve DT overlay support when adding multiple overlays

   - Convert printk's to %pOF format specifiers. Most went via subsystem
     trees, but picked up the remaining orphans

   - Correct unittests to use preferred "okay" for "status" property
     value

   - Add a KASLR seed property

   - Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa

   - Fix modalias buffer handling

   - Clean-up of include paths for building dtbs

   - Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10
     devices

   - Add nvmem bindings for MediaTek MT7623 and MT7622 SoC

   - Add compatible string for Allwinner H5 Mali-450 GPU

   - Fix links to old OpenFirmware docs with new mirror on
     devicetree.org

   - Remove status property from binding doc examples"

* tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
  devicetree: Adjust status "ok" -> "okay" under drivers/of/
  dt-bindings: Remove "status" from examples
  dt-bindings: pinctrl: sh-pfc: Use generic node name
  dt-bindings: Add vendor Mellanox
  dt-binding: net/phy: fix interrupts description
  virt: Convert to using %pOF instead of full_name
  macintosh: Convert to using %pOF instead of full_name
  ide: pmac: Convert to using %pOF instead of full_name
  microblaze: Convert to using %pOF instead of full_name
  dt-bindings: usb: musb: Grammar s/the/to/, s/is/are/
  of: Use PLATFORM_DEVID_NONE definition
  of/device: Fix of_device_get_modalias() buffer handling
  of/device: Prevent buffer overflow in of_device_modalias()
  dt-bindings: add amc6821, isl1208 trivial bindings
  dt-bindings: add vendor prefix for Theobroma Systems
  of: search scripts/dtc/include-prefixes path for both CPP and DTC
  of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP
  of: remove drivers/of/testcase-data from include search path for CPP
  of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered
  iio: srf08: add device tree binding for srf02 and srf10
  ...
2017-09-07 14:43:33 -07:00

676 lines
17 KiB
Plaintext
Raw Blame History

Renesas R-Car sound
=============================================
* Modules
=============================================
Renesas R-Car sound is constructed from below modules
(for Gen2 or later)
SCU : Sampling Rate Converter Unit
- SRC : Sampling Rate Converter
- CMD
- CTU : Channel Transfer Unit
- MIX : Mixer
- DVC : Digital Volume and Mute Function
SSIU : Serial Sound Interface Unit
SSI : Serial Sound Interface
See detail of each module's channels, connection, limitation on datasheet
=============================================
* Multi channel
=============================================
Multi channel is supported by Multi-SSI, or TDM-SSI.
Multi-SSI : 6ch case, you can use stereo x 3 SSI
TDM-SSI : 6ch case, you can use TDM
=============================================
* Enable/Disable each modules
=============================================
See datasheet to check SRC/CTU/MIX/DVC connect-limitation.
DT controls enabling/disabling module.
${LINUX}/arch/arm/boot/dts/r8a7790-lager.dts can be good example.
This is example of
Playback: [MEM] -> [SRC2] -> [DVC0] -> [SSIU0/SSI0] -> [codec]
Capture: [MEM] <- [DVC1] <- [SRC3] <- [SSIU1/SSI1] <- [codec]
&rcar_sound {
...
rcar_sound,dai {
dai0 {
playback = <&ssi0 &src2 &dvc0>;
capture = <&ssi1 &src3 &dvc1>;
};
};
};
You can use below.
${LINUX}/arch/arm/boot/dts/r8a7790.dts can be good example.
&src0 &ctu00 &mix0 &dvc0 &ssi0
&src1 &ctu01 &mix1 &dvc1 &ssi1
&src2 &ctu02 &ssi2
&src3 &ctu03 &ssi3
&src4 &ssi4
&src5 &ctu10 &ssi5
&src6 &ctu11 &ssi6
&src7 &ctu12 &ssi7
&src8 &ctu13 &ssi8
&src9 &ssi9
=============================================
* SRC (Sampling Rate Converter)
=============================================
[xx]Hz [yy]Hz
------> [SRC] ------>
SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
Asynchronous mode: input data / output data are based on different clocks.
you can use this mode on Playback / Capture
Synchronous mode: input data / output data are based on same clocks.
This mode will be used if system doesn't have its input clock,
for example digital TV case.
you can use this mode on Playback
------------------
** Asynchronous mode
------------------
You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
compatible = "simple-scu-audio-card";
...
/*
* SRC Asynchronous mode setting
* Playback:
* All input data will be converted to 48kHz
* Capture:
* Inputed 48kHz data will be converted to
* system specified Hz
*/
simple-audio-card,convert-rate = <48000>;
...
simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
simple-audio-card,codec {
...
};
};
------------------
** Synchronous mode
------------------
> amixer set "SRC Out Rate" on
> aplay xxxx.wav
> amixer set "SRC Out Rate" 48000
> amixer set "SRC Out Rate" 44100
=============================================
* CTU (Channel Transfer Unit)
=============================================
[xx]ch [yy]ch
------> [CTU] -------->
CTU can convert [xx]ch to [yy]ch, or exchange outputed channel.
CTU conversion needs matrix settings.
For more detail information, see below
Renesas R-Car datasheet
- Sampling Rate Converter Unit (SCU)
- SCU Operation
- CMD Block
- Functional Blocks in CMD
Renesas R-Car datasheet
- Sampling Rate Converter Unit (SCU)
- Register Description
- CTUn Scale Value exx Register (CTUn_SVxxR)
${LINUX}/sound/soc/sh/rcar/ctu.c
- comment of header
You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
compatible = "simple-scu-audio-card";
...
/*
* CTU setting
* All input data will be converted to 2ch
* as output data
*/
simple-audio-card,convert-channels = <2>;
...
simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
simple-audio-card,codec {
...
};
};
Ex) Exchange output channel
Input -> Output
1ch -> 0ch
0ch -> 1ch
example of using matrix
output 0ch = (input 0ch x 0) + (input 1ch x 1)
output 1ch = (input 0ch x 1) + (input 1ch x 0)
amixer set "CTU Reset" on
amixer set "CTU Pass" 9,10
amixer set "CTU SV0" 0,4194304
amixer set "CTU SV1" 4194304,0
example of changing connection
amixer set "CTU Reset" on
amixer set "CTU Pass" 2,1
=============================================
* MIX (Mixer)
=============================================
MIX merges 2 sounds path. You can see 2 sound interface on system,
and these sounds will be merged by MIX.
aplay -D plughw:0,0 xxxx.wav &
aplay -D plughw:0,1 yyyy.wav
You need to use "simple-scu-audio-card" sound card for it.
Ex)
[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
|
[MEM] -> [SRC2] -> [CTU03] -+
sound {
compatible = "simple-scu-audio-card";
...
simple-audio-card,cpu-0 {
sound-dai = <&rcar_sound 0>;
};
simple-audio-card,cpu-1 {
sound-dai = <&rcar_sound 1>;
};
simple-audio-card,codec {
...
};
};
&rcar_sound {
...
rcar_sound,dai {
dai0 {
playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
};
dai1 {
playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
};
};
};
=============================================
* DVC (Digital Volume and Mute Function)
=============================================
DVC controls Playback/Capture volume.
Playback Volume
amixer set "DVC Out" 100%
Capture Volume
amixer set "DVC In" 100%
Playback Mute
amixer set "DVC Out Mute" on
Capture Mute
amixer set "DVC In Mute" on
Volume Ramp
amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
amixer set "DVC Out Ramp" on
aplay xxx.wav &
amixer set "DVC Out" 80% // Volume Down
amixer set "DVC Out" 100% // Volume Up
=============================================
* SSIU (Serial Sound Interface Unit)
=============================================
There is no DT settings for SSIU, because SSIU will be automatically
selected via SSI.
SSIU can avoid some under/over run error, because it has some buffer.
But you can't use it if SSI was PIO mode.
In DMA mode, you can select not to use SSIU by using "no-busif" on DT.
&ssi0 {
no-busif;
};
=============================================
* SSI (Serial Sound Interface)
=============================================
** PIO mode
You can use PIO mode which is for connection check by using.
Note: The system will drop non-SSI modules in PIO mode
even though if DT is selecting other modules.
&ssi0 {
pio-transfer
};
** DMA mode without SSIU
You can use DMA without SSIU.
Note: under/over run, or noise are likely to occur
&ssi0 {
no-busif;
};
** PIN sharing
Each SSI can share WS pin. It is based on platform.
This is example if SSI1 want to share WS pin with SSI0
&ssi1 {
shared-pin;
};
** Multi-SSI
You can use Multi-SSI.
This is example of SSI0/SSI1/SSI2 (= for 6ch)
&rcar_sound {
...
rcar_sound,dai {
dai0 {
playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
};
};
};
** TDM-SSI
You can use TDM with SSI.
This is example of TDM 6ch.
Driver can automatically switches TDM <-> stereo mode in this case.
rsnd_tdm: sound {
compatible = "simple-audio-card";
...
simple-audio-card,cpu {
/* system can use TDM 6ch */
dai-tdm-slot-num = <6>;
sound-dai = <&rcar_sound>;
};
simple-audio-card,codec {
...
};
};
=============================================
Required properties:
=============================================
- compatible : "renesas,rcar_sound-<soctype>", fallbacks
"renesas,rcar_sound-gen1" if generation1, and
"renesas,rcar_sound-gen2" if generation2
"renesas,rcar_sound-gen3" if generation3
Examples with soctypes are:
- "renesas,rcar_sound-r8a7778" (R-Car M1A)
- "renesas,rcar_sound-r8a7779" (R-Car H1)
- "renesas,rcar_sound-r8a7790" (R-Car H2)
- "renesas,rcar_sound-r8a7791" (R-Car M2-W)
- "renesas,rcar_sound-r8a7793" (R-Car M2-N)
- "renesas,rcar_sound-r8a7794" (R-Car E2)
- "renesas,rcar_sound-r8a7795" (R-Car H3)
- reg : Should contain the register physical address.
required register is
SRU/ADG/SSI if generation1
SRU/ADG/SSIU/SSI if generation2
- rcar_sound,ssi : Should contain SSI feature.
The number of SSI subnode should be same as HW.
see below for detail.
- rcar_sound,src : Should contain SRC feature.
The number of SRC subnode should be same as HW.
see below for detail.
- rcar_sound,ctu : Should contain CTU feature.
The number of CTU subnode should be same as HW.
see below for detail.
- rcar_sound,mix : Should contain MIX feature.
The number of MIX subnode should be same as HW.
see below for detail.
- rcar_sound,dvc : Should contain DVC feature.
The number of DVC subnode should be same as HW.
see below for detail.
- rcar_sound,dai : DAI contents.
The number of DAI subnode should be same as HW.
see below for detail.
- #sound-dai-cells : it must be 0 if your system is using single DAI
it must be 1 if your system is using multi DAI
- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
- clock-names : List of necessary clock names.
"ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
"dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
Optional properties:
- #clock-cells : it must be 0 if your system has audio_clkout
it must be 1 if your system has audio_clkout0/1/2/3
- clock-frequency : for all audio_clkout0/1/2/3
- clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn
is asynchronizes with lr-clock.
- resets : References to SSI resets.
- reset-names : List of valid reset names.
"ssi-all", "ssi.X"
SSI subnode properties:
- interrupts : Should contain SSI interrupt for PIO transfer
- shared-pin : if shared clock pin
- pio-transfer : use PIO transfer mode
- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case
- dma : Should contain Audio DMAC entry
- dma-names : SSI case "rx" (=playback), "tx" (=capture)
SSIU case "rxu" (=playback), "txu" (=capture)
SRC subnode properties:
- dma : Should contain Audio DMAC entry
- dma-names : "rx" (=playback), "tx" (=capture)
DVC subnode properties:
- dma : Should contain Audio DMAC entry
- dma-names : "tx" (=playback/capture)
DAI subnode properties:
- playback : list of playback modules
- capture : list of capture modules
=============================================
Example:
=============================================
rcar_sound: sound@ec500000 {
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x1280>, /* SSI */
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
<&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
<&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
<&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
<&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
<&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
<&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
<&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
clock-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
"src.9", "src.8", "src.7", "src.6", "src.5",
"src.4", "src.3", "src.2", "src.1", "src.0",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
rcar_sound,dvc {
dvc0: dvc-0 {
dmas = <&audma0 0xbc>;
dma-names = "tx";
};
dvc1: dvc-1 {
dmas = <&audma0 0xbe>;
dma-names = "tx";
};
};
rcar_sound,mix {
mix0: mix-0 { };
mix1: mix-1 { };
};
rcar_sound,ctu {
ctu00: ctu-0 { };
ctu01: ctu-1 { };
ctu02: ctu-2 { };
ctu03: ctu-3 { };
ctu10: ctu-4 { };
ctu11: ctu-5 { };
ctu12: ctu-6 { };
ctu13: ctu-7 { };
};
rcar_sound,src {
src0: src-0 {
interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
src1: src-1 {
interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
src2: src-2 {
interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
src3: src-3 {
interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
src4: src-4 {
interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
src5: src-5 {
interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
src6: src-6 {
interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
src7: src-7 {
interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
src8: src-8 {
interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
src9: src-9 {
interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
};
};
rcar_sound,ssi {
ssi0: ssi-0 {
interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi-1 {
interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi2: ssi-2 {
interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi3: ssi-3 {
interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi4: ssi-4 {
interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi5: ssi-5 {
interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi6: ssi-6 {
interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi7: ssi-7 {
interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi8: ssi-8 {
interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi9: ssi-9 {
interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
};
};
rcar_sound,dai {
dai0 {
playback = <&ssi5 &src5>;
capture = <&ssi6>;
};
dai1 {
playback = <&ssi3>;
};
dai2 {
capture = <&ssi4>;
};
dai3 {
playback = <&ssi7>;
};
dai4 {
capture = <&ssi8>;
};
};
};
=============================================
Example: simple sound card
=============================================
rsnd_ak4643: sound {
compatible = "simple-audio-card";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcodec>;
simple-audio-card,frame-master = <&sndcodec>;
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4643>;
clocks = <&audio_clock>;
};
};
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
rcar_sound,dai {
dai0 {
playback = <&ssi0 &src2 &dvc0>;
capture = <&ssi1 &src3 &dvc1>;
};
};
};
&ssi1 {
shared-pin;
};
=============================================
Example: simple sound card for TDM
=============================================
rsnd_tdm: sound {
compatible = "simple-audio-card";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcodec>;
simple-audio-card,frame-master = <&sndcodec>;
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
dai-tdm-slot-num = <6>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&xxx>;
};
};
=============================================
Example: simple sound card for Multi channel
=============================================
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
rcar_sound,dai {
dai0 {
playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink