AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-15 17:36:57 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
0bae60fcee
linux_dsm_epyc7002/drivers/mmc/host/Kconfig
Linus Torvalds 0bae60fcee There are two major achievements for MMC in this release, which deserves to be 
specially highlighted.
 
 First, we have converted the MMC block device from using the legacy blk
 interface into using the modern blkmq interface. Not only do we get all the
 nice effects from using blkmq, but it also means that new fresh nice code
 replaces old rusty code. Great news to everybody that cares about MMC/SD!
 
 It should also be noted that converting to blkmq has not been trivial, mostly
 because of that we have been carrying too much of MMC specific optimizations
 for the I/O request path, rather than striving to move these to the generic blk
 layer. Hopefully we won't be doing that mistake, ever again.
 
 Special thanks to Adrian Hunter (Intel) and to Linus Walleij (Linaro), who both
 have been working on this for quite some time!
 
 Second, on top of the blkmq deployment, we have enabled full support the eMMC
 command queuing feature, introduced in the eMMC v.5.1 spec. This also includes
 an implementation of a host driver library, supporting the corresponding CQHCI
 HW. Ideally, those controllers that supports CQHCI should only need some minor
 adaptations to make this play.
 
 So far the sdhci-pci driver for the Intel GLKs and the sdhci-of-arasan driver
 used on Rockchip RK3399, have enabled support for eMMC command queueing.
 
 Worth to highlight is also that, implementing the eMMC command queuing support
 has been a collaborative effort, as several people from Codeaurora, Rockchip,
 Intel and Linaro have been involved. However, the work has been driven by
 Adrian Hunter (Intel).
 
 In some shadow of the above, here are the rest of the highlights:
 
 MMC core:
  - Don't remove non-removable cards during system suspend
  - Add a slot-gpio helper to check capability of GPIO WP detection
 
 MMC host:
  - sdhci: Cleanups and improvements of some wakeup related code
  - sdhci-pci-arasan: New variant to support Arasan PCI HW with integrated phy
  - sdhci-acpi: Avoid broken UHS transfer modes on Intel CHT
  - sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400
  - sdhci_f_sdh30: Add ACPI support
  - sdhci-esdhc-imx: Enable/disable clock at runtime suspend/resume
  - sdhci-of-esdhc: A few minor fixes
  - mmci: Add support for new STM32 variant
  - renesas_sdhi: enable R-Car D3 (r8a77995) support
  - tmio/renesas_sdhi: Re-structuring, cleanups and modernizations
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJabvFuAAoJEP4mhCVzWIwp7qIQAMFyLGkmJya9woUDgPlKJZMD
 pasQtW5/60ASEid4hiZsGQgDrvmq+8jba+3O6QhL/maTX69nhtQXTGvbyHlIYjIG
 J8z1oaflYz3tQ2w5I+85mkDciQEECH7rIiXMwZn1WUKByptnSJaqA95b2eiB5b+/
 zoCx9ZWCKeWBxuXsBf8E/Cyt7H6VndDVtIYzcmNYb8x0SdKGj8cjQ8YvtP+fIse1
 5bSWzfSO33T+gHW0mxX1C9bBjSVTLB2yYyiTCdd8grUIimexatgcpj4VA1zWPNcA
 EJYeXwUCULNMDobLVEd0XuScIX92ZWiKd2ITtuwh1OaLltGjubt6K6UCa3ecZfIv
 RbzCTB+YpkyNGYnf+aQlbLF5OO9IWVcfMP8hTtHdcm7YbKnI2u6IFhDR4mHtFWpx
 e3HZFZoIVwtBRxUwM8e2rNs0YfA96fn7+5YWqJ77pSa8rxGmIXE3Znf911MRHxej
 faDoYYAFSxBlvHujQ4a/yxHRldaFGkelNCjvjnIC0+1O++im9oi3c8Agg8SYSR9H
 dKckEBEXTVPz6PzXgmy5+fgNZ1UK1LLkAdVrdMBcoIY+BUi9xUBlu6Wng3Qr86Ht
 YD/WO/2dLewPAx9qVnBO6L001IbS//dr+qPFjaQdkXP6F1KAKQRmrs2QngKPks2x
 PQB46gFuxdLj6Ykg12wK
 =kUV+
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "There are two major achievements for MMC in this release, which
  deserves to be specially highlighted.

  First, we have converted the MMC block device from using the legacy
  blk interface into using the modern blkmq interface. Not only do we
  get all the nice effects from using blkmq, but it also means that new
  fresh nice code replaces old rusty code. Great news to everybody that
  cares about MMC/SD!

  It should also be noted that converting to blkmq has not been trivial,
  mostly because of that we have been carrying too much of MMC specific
  optimizations for the I/O request path, rather than striving to move
  these to the generic blk layer. Hopefully we won't be doing that
  mistake, ever again.

  Special thanks to Adrian Hunter (Intel) and to Linus Walleij (Linaro),
  who both have been working on this for quite some time!

  Second, on top of the blkmq deployment, we have enabled full support
  the eMMC command queuing feature, introduced in the eMMC v.5.1 spec.
  This also includes an implementation of a host driver library,
  supporting the corresponding CQHCI HW. Ideally, those controllers that
  supports CQHCI should only need some minor adaptations to make this
  play.

  So far the sdhci-pci driver for the Intel GLKs and the sdhci-of-arasan
  driver used on Rockchip RK3399, have enabled support for eMMC command
  queueing.

  Worth to highlight is also that, implementing the eMMC command queuing
  support has been a collaborative effort, as several people from
  Codeaurora, Rockchip, Intel and Linaro have been involved. However,
  the work has been driven by Adrian Hunter (Intel).

  In some shadow of the above, here are the rest of the highlights:

  MMC core:
   - Don't remove non-removable cards during system suspend
   - Add a slot-gpio helper to check capability of GPIO WP detection

  MMC host:
   - sdhci: Cleanups and improvements of some wakeup related code
   - sdhci-pci-arasan: New variant to support Arasan PCI HW with integrated phy
   - sdhci-acpi: Avoid broken UHS transfer modes on Intel CHT
   - sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400
   - sdhci_f_sdh30: Add ACPI support
   - sdhci-esdhc-imx: Enable/disable clock at runtime suspend/resume
   - sdhci-of-esdhc: A few minor fixes
   - mmci: Add support for new STM32 variant
   - renesas_sdhi: enable R-Car D3 (r8a77995) support
   - tmio/renesas_sdhi: Re-structuring, cleanups and modernizations"

* tag 'mmc-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (96 commits)
  mmc: mmci: fix error return code in mmci_probe()
  mmc: davinci: suppress error message on EPROBE_DEFER
  mmc: davinci: dont' use module_platform_driver_probe()
  mmc: tmio: hide unused tmio_mmc_clk_disable/tmio_mmc_clk_enable functions
  mmc: mmci: Add STM32 variant
  mmc: mmci: Add support for setting pad type via pinctrl
  mmc: mmci: Don't pretend all variants to have OPENDRAIN bit
  mmc: mmci: Don't pretend all variants to have MCI_STARBITERR flag
  mmc: mmci: Don't pretend all variants to have MMCIMASK1 register
  mmc: tmio: refactor .get_ro hook
  mmc: slot-gpio: add a helper to check capability of GPIO WP detection
  mmc: tmio: remove dma_ops from tmio_mmc_host_probe() argument
  mmc: tmio: move {tmio_}mmc_of_parse() to tmio_mmc_host_alloc()
  mmc: tmio: move clk_enable/disable out of tmio_mmc_host_probe()
  mmc: tmio: ioremap memory resource in tmio_mmc_host_alloc()
  mmc: sh_mmcif: remove redundant initialization of 'opc'
  mmc: sdhci: Rework sdhci_enable_irq_wakeups()
  mmc: sdhci: Handle failure of enable_irq_wake()
  mmc: sdhci: Stop exporting sdhci_enable_irq_wakeups()
  mmc: sdhci-pci: Use device wakeup capability to determine MMC_PM_WAKE_SDIO_IRQ capability
  ...
2018-01-29 11:26:11 -08:00

942 lines
28 KiB
Plaintext
Raw Blame History

#
# MMC/SD host controller drivers
#
comment "MMC/SD/SDIO Host Controller Drivers"
config MMC_DEBUG
bool "MMC host drivers debugging"
depends on MMC != n
help
This is an option for use by developers; most people should
say N here. This enables MMC host driver debugging. And further
added host drivers please don't invent their private macro for
debugging.
config MMC_ARMMMCI
tristate "ARM AMBA Multimedia Card Interface support"
depends on ARM_AMBA
help
This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
Interface (PL180 and PL181) support. If you have an ARM(R)
platform with a Multimedia Card slot, say Y or M here.
If unsure, say N.
config MMC_QCOM_DML
bool "Qualcomm Data Mover for SD Card Controller"
depends on MMC_ARMMMCI && QCOM_BAM_DMA
default y
help
This selects the Qualcomm Data Mover lite/local on SD Card controller.
This option will enable the dma to work correctly, if you are using
Qcom SOCs and MMC, you would probably need this option to get DMA working.
if unsure, say N.
config MMC_PXA
tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
depends on ARCH_PXA
help
This selects the Intel(R) PXA(R) Multimedia card Interface.
If you have a PXA(R) platform with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
config MMC_SDHCI
tristate "Secure Digital Host Controller Interface support"
depends on HAS_DMA
help
This selects the generic Secure Digital Host Controller Interface.
It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
and Toshiba(R). Most controllers found in laptops are of this type.
If you have a controller with this interface, say Y or M here. You
also need to enable an appropriate bus interface.
If unsure, say N.
config MMC_SDHCI_IO_ACCESSORS
bool
depends on MMC_SDHCI
help
This is silent Kconfig symbol that is selected by the drivers that
need to overwrite SDHCI IO memory accessors.
config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
bool
depends on MMC_SDHCI
select MMC_SDHCI_IO_ACCESSORS
help
This option is selected by drivers running on big endian hosts
and performing I/O to a SDHCI controller through a bus that
implements a hardware byte swapper using a 32-bit datum.
This endian mapping mode is called "data invariance" and
has the effect of scrambling the addresses and formats of data
accessed in sizes other than the datum size.
This is the case for the Nintendo Wii SDHCI.
config MMC_SDHCI_PCI
tristate "SDHCI support on PCI bus"
depends on MMC_SDHCI && PCI
select MMC_CQHCI
help
This selects the PCI Secure Digital Host Controller Interface.
Most controllers found today are PCI devices.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_RICOH_MMC
bool "Ricoh MMC Controller Disabler"
depends on MMC_SDHCI_PCI
default y
help
This adds a pci quirk to disable Ricoh MMC Controller. This
proprietary controller is unnecessary because the SDHCI driver
supports MMC cards on the SD controller, but if it is not
disabled, it will steal the MMC cards away - rendering them
useless. It is safe to select this even if you don't
have a Ricoh based card reader.
If unsure, say Y.
config MMC_SDHCI_ACPI
tristate "SDHCI support for ACPI enumerated SDHCI controllers"
depends on MMC_SDHCI && ACPI
select IOSF_MBI if X86
help
This selects support for ACPI enumerated SDHCI controllers,
identified by ACPI Compatibility ID PNP0D40 or specific
ACPI Hardware IDs.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_PLTFM
tristate "SDHCI platform and OF driver helper"
depends on MMC_SDHCI
help
This selects the common helper functions support for Secure Digital
Host Controller Interface based platform and OF drivers.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_OF_ARASAN
tristate "SDHCI OF support for the Arasan SDHCI controllers"
depends on MMC_SDHCI_PLTFM
depends on OF
depends on COMMON_CLK
select MMC_CQHCI
help
This selects the Arasan Secure Digital Host Controller Interface
(SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_OF_AT91
tristate "SDHCI OF support for the Atmel SDMMC controller"
depends on MMC_SDHCI_PLTFM
depends on OF
help
This selects the Atmel SDMMC driver
config MMC_SDHCI_OF_ESDHC
tristate "SDHCI OF support for the Freescale eSDHC controller"
depends on MMC_SDHCI_PLTFM
depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
select MMC_SDHCI_IO_ACCESSORS
select FSL_GUTS
help
This selects the Freescale eSDHC controller support.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_OF_HLWD
tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers"
depends on MMC_SDHCI_PLTFM
depends on PPC
select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
help
This selects the Secure Digital Host Controller Interface (SDHCI)
found in the "Hollywood" chipset of the Nintendo Wii video game
console.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_CADENCE
tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
depends on MMC_SDHCI_PLTFM
depends on OF
help
This selects the Cadence SD/SDIO/eMMC driver.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_CNS3XXX
tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
depends on ARCH_CNS3XXX
depends on MMC_SDHCI_PLTFM
help
This selects the SDHCI support for CNS3xxx System-on-Chip devices.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_ESDHC_IMX
tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
depends on ARCH_MXC
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
This selects the Freescale eSDHC/uSDHC controller support
found on i.MX25, i.MX35 i.MX5x and i.MX6x.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_DOVE
tristate "SDHCI support on Marvell's Dove SoC"
depends on ARCH_DOVE || MACH_DOVE
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
This selects the Secure Digital Host Controller Interface in
Marvell's Dove SoC.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_TEGRA
tristate "SDHCI platform support for the Tegra SD/MMC Controller"
depends on ARCH_TEGRA
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
This selects the Tegra SD/MMC controller. If you have a Tegra
platform with SD or MMC devices, say Y or M here.
If unsure, say N.
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
depends on MMC_SDHCI && PLAT_SAMSUNG
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
range of SoC.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_SIRF
tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
depends on ARCH_SIRF
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
This selects the SDHCI support for SiRF System-on-Chip devices.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_PXAV3
tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
depends on CLKDEV_LOOKUP
depends on MMC_SDHCI_PLTFM
depends on ARCH_BERLIN || ARCH_MMP || ARCH_MVEBU || COMPILE_TEST
default CPU_MMP2
help
This selects the Marvell(R) PXAV3 SD Host Controller.
If you have a MMP2 platform with SD Host Controller
and a card slot, say Y or M here.
If unsure, say N.
config MMC_SDHCI_PXAV2
tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
depends on CLKDEV_LOOKUP
depends on MMC_SDHCI_PLTFM
depends on ARCH_MMP || COMPILE_TEST
default CPU_PXA910
help
This selects the Marvell(R) PXAV2 SD Host Controller.
If you have a PXA9XX platform with SD Host Controller
and a card slot, say Y or M here.
If unsure, say N.
config MMC_SDHCI_SPEAR
tristate "SDHCI support on ST SPEAr platform"
depends on MMC_SDHCI && PLAT_SPEAR
depends on OF
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the ST SPEAR range
of SoC
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_S3C_DMA
bool "DMA support on S3C SDHCI"
depends on MMC_SDHCI_S3C
help
Enable DMA support on the Samsung S3C SDHCI glue. The DMA
has proved to be problematic if the controller encounters
certain errors, and thus should be treated with care.
YMMV.
config MMC_SDHCI_BCM_KONA
tristate "SDHCI support on Broadcom KONA platform"
depends on ARCH_BCM_MOBILE
depends on MMC_SDHCI_PLTFM
help
This selects the Broadcom Kona Secure Digital Host Controller
Interface(SDHCI) support.
This is used in Broadcom mobile SoCs.
If you have a controller with this interface, say Y or M here.
config MMC_SDHCI_F_SDH30
tristate "SDHCI support for Fujitsu Semiconductor F_SDH30"
depends on MMC_SDHCI_PLTFM
depends on OF || ACPI
help
This selects the Secure Digital Host Controller Interface (SDHCI)
Needed by some Fujitsu SoC for MMC / SD / SDIO support.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_IPROC
tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
depends on ARCH_BCM2835 || ARCH_BCM_IPROC || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
default ARCH_BCM_IPROC
select MMC_SDHCI_IO_ACCESSORS
help
This selects the iProc SD/MMC controller.
If you have a BCM2835 or IPROC platform with SD or MMC devices,
say Y or M here.
If unsure, say N.
config MMC_MESON_GX
tristate "Amlogic S905/GX* SD/MMC Host Controller support"
depends on ARCH_MESON && MMC
help
This selects support for the Amlogic SD/MMC Host Controller
found on the S905/GX* family of SoCs. This controller is
MMC 5.1 compliant and supports SD, eMMC and SDIO interfaces.
If you have a controller with this interface, say Y here.
config MMC_MESON_MX_SDIO
tristate "Amlogic Meson6/Meson8/Meson8b SD/MMC Host Controller support"
depends on ARCH_MESON || COMPILE_TEST
depends on COMMON_CLK
depends on HAS_DMA
depends on OF
help
This selects support for the SD/MMC Host Controller on
Amlogic Meson6, Meson8 and Meson8b SoCs.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_MOXART
tristate "MOXART SD/MMC Host Controller support"
depends on ARCH_MOXART && MMC
help
This selects support for the MOXART SD/MMC Host Controller.
MOXA provides one multi-functional card reader which can
be found on some embedded hardware such as UC-7112-LX.
If you have a controller with this interface, say Y here.
config MMC_SDHCI_ST
tristate "SDHCI support on STMicroelectronics SoC"
depends on ARCH_STI || FSP2
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
This selects the Secure Digital Host Controller Interface in
STMicroelectronics SoCs.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support"
depends on ARCH_OMAP
depends on TPS65010 || !MACH_OMAP_H2
help
This selects the TI OMAP Multimedia card Interface.
If you have an OMAP board with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
config MMC_OMAP_HS
tristate "TI OMAP High Speed Multimedia Card Interface support"
depends on HAS_DMA
depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
help
This selects the TI OMAP High Speed Multimedia card Interface.
If you have an omap2plus board with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
depends on ISA_DMA_API
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.
If you have a machine with a integrated W83L518D or W83L519D
SD/MMC card reader, say Y or M here.
If unsure, say N.
config MMC_AU1X
tristate "Alchemy AU1XX0 MMC Card Interface support"
depends on MIPS_ALCHEMY
help
This selects the AMD Alchemy(R) Multimedia card interface.
If you have a Alchemy platform with a MMC slot, say Y or M here.
If unsure, say N.
config MMC_ATMELMCI
tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
depends on ARCH_AT91
help
This selects the Atmel Multimedia Card Interface driver.
If you have an AT91 platform with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
config MMC_SDHCI_MSM
tristate "Qualcomm SDHCI Controller Support"
depends on ARCH_QCOM || (ARM && COMPILE_TEST)
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
This selects the Secure Digital Host Controller Interface (SDHCI)
support present in Qualcomm SOCs. The controller supports
SD/MMC/SDIO devices.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_MXC
tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
depends on ARCH_MXC || PPC_MPC512x
help
This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
Multimedia Card Interface. If you have an i.MX or MPC512x platform
with a Multimedia Card slot, say Y or M here.
If unsure, say N.
config MMC_MXS
tristate "Freescale MXS Multimedia Card Interface support"
depends on ARCH_MXS && MXS_DMA
help
This selects the Freescale SSP MMC controller found on MXS based
platforms like mx23/28.
If unsure, say N.
config MMC_TIFM_SD
tristate "TI Flash Media MMC/SD Interface support"
depends on PCI
select TIFM_CORE
help
Say Y here if you want to be able to access MMC/SD cards with
the Texas Instruments(R) Flash Media card reader, found in many
laptops.
This option 'selects' (turns on, enables) 'TIFM_CORE', but you
probably also need appropriate card reader host adapter, such as
'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
(TIFM_7XX1)'.
To compile this driver as a module, choose M here: the
module will be called tifm_sd.
config MMC_MVSDIO
tristate "Marvell MMC/SD/SDIO host driver"
depends on PLAT_ORION
depends on OF
---help---
This selects the Marvell SDIO host driver.
SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
SoC controllers.
To compile this driver as a module, choose M here: the
module will be called mvsdio.
config MMC_DAVINCI
tristate "TI DAVINCI Multimedia Card Interface support"
depends on ARCH_DAVINCI
help
This selects the TI DAVINCI Multimedia card Interface.
If you have an DAVINCI board with a Multimedia Card slot,
say Y or M here. If unsure, say N.
config MMC_GOLDFISH
tristate "goldfish qemu Multimedia Card Interface support"
depends on HAS_DMA
depends on GOLDFISH || COMPILE_TEST
help
This selects the Goldfish Multimedia card Interface emulation
found on the Goldfish Android virtual device emulation.
config MMC_SPI
tristate "MMC/SD/SDIO over SPI"
depends on SPI_MASTER && HAS_DMA
select CRC7
select CRC_ITU_T
help
Some systems access MMC/SD/SDIO cards using a SPI controller
instead of using a "native" MMC/SD/SDIO controller. This has a
disadvantage of being relatively high overhead, but a compensating
advantage of working on many systems without dedicated MMC/SD/SDIO
controllers.
If unsure, or if your system has no SPI master driver, say N.
config MMC_S3C
tristate "Samsung S3C SD/MMC Card Interface support"
depends on ARCH_S3C24XX
depends on S3C24XX_DMAC
help
This selects a driver for the MCI interface found in
Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
If you have a board based on one of those and a MMC/SD
slot, say Y or M here.
If unsure, say N.
config MMC_S3C_HW_SDIO_IRQ
bool "Hardware support for SDIO IRQ"
depends on MMC_S3C
help
Enable the hardware support for SDIO interrupts instead of using
the generic polling code.
choice
prompt "Samsung S3C SD/MMC transfer code"
depends on MMC_S3C
config MMC_S3C_PIO
bool "Use PIO transfers only"
help
Use PIO to transfer data between memory and the hardware.
PIO is slower than DMA as it requires CPU instructions to
move the data. This has been the traditional default for
the S3C MCI driver.
config MMC_S3C_DMA
bool "Use DMA transfers only"
help
Use DMA to transfer data between memory and the hardare.
Currently, the DMA support in this driver seems to not be
working properly and needs to be debugged before this
option is useful.
endchoice
config MMC_SDRICOH_CS
tristate "MMC/SD driver for Ricoh Bay1Controllers"
depends on PCI && PCMCIA
help
Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
card whenever you insert a MMC or SD card into the card slot.
To compile this driver as a module, choose M here: the
module will be called sdricoh_cs.
config MMC_TMIO_CORE
tristate
config MMC_TMIO
tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
depends on MFD_TMIO || MFD_ASIC3
select MMC_TMIO_CORE
help
This provides support for the SD/MMC cell found in TC6393XB,
T7L66XB and also HTC ASIC3
config MMC_SDHI
tristate "Renesas SDHI SD/SDIO controller support"
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
select MMC_TMIO_CORE
help
This provides support for the SDHI SD/SDIO controller found in
Renesas SuperH, ARM and ARM64 based SoCs
config MMC_SDHI_SYS_DMAC
tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
depends on MMC_SDHI
default MMC_SDHI if (SUPERH || ARM)
help
This provides DMA support for SDHI SD/SDIO controllers
using SYS-DMAC via DMA Engine. This supports the controllers
found in SuperH and Renesas ARM based SoCs.
config MMC_SDHI_INTERNAL_DMAC
tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
depends on ARM64 || COMPILE_TEST
depends on MMC_SDHI
default MMC_SDHI if ARM64
help
This provides DMA support for SDHI SD/SDIO controllers
using on-chip bus mastering. This supports the controllers
found in arm64 based SoCs.
config MMC_CB710
tristate "ENE CB710 MMC/SD Interface support"
depends on PCI
select CB710_CORE
help
This option enables support for MMC/SD part of ENE CB710/720 Flash
memory card reader found in some laptops (ie. some versions of
HP Compaq nx9500).
This driver can also be built as a module. If so, the module
will be called cb710-mmc.
config MMC_VIA_SDMMC
tristate "VIA SD/MMC Card Reader Driver"
depends on PCI
help
This selects the VIA SD/MMC Card Reader driver, say Y or M here.
VIA provides one multi-functional card reader which integrated into
some motherboards manufactured by VIA. This card reader supports
SD/MMC/SDHC.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config SDH_BFIN
tristate "Blackfin Secure Digital Host support"
depends on (BF54x && !BF544) || (BF51x && !BF512)
help
If you say yes here you will get support for the Blackfin on-chip
Secure Digital Host interface. This includes support for MMC and
SD cards.
To compile this driver as a module, choose M here: the
module will be called bfin_sdh.
If unsure, say N.
config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround"
depends on SDH_BFIN
help
If you say yes here SD-Cards may work on the EZkit.
config MMC_CAVIUM_OCTEON
tristate "Cavium OCTEON SD/MMC Card Interface support"
depends on CAVIUM_OCTEON_SOC
help
This selects Cavium OCTEON SD/MMC card Interface.
If you have an OCTEON board with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
config MMC_CAVIUM_THUNDERX
tristate "Cavium ThunderX SD/MMC Card Interface support"
depends on PCI && 64BIT && (ARM64 || COMPILE_TEST)
depends on GPIO_THUNDERX
depends on OF_ADDRESS
help
This selects Cavium ThunderX SD/MMC Card Interface.
If you have an Cavium ARM64 board with a Multimedia Card slot
or builtin eMMC chip say Y or M here. If built as a module
the module will be called thunderx_mmc.ko.
config MMC_DW
tristate "Synopsys DesignWare Memory Card Interface"
depends on HAS_DMA
depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
help
This selects support for the Synopsys DesignWare Mobile Storage IP
block, this provides host support for SD and MMC interfaces, in both
PIO, internal DMA mode and external DMA mode.
config MMC_DW_PLTFM
tristate "Synopsys Designware MCI Support as platform device"
depends on MMC_DW
default y
help
This selects the common helper functions support for Host Controller
Interface based platform driver. Please select this option if the IP
is present as a platform device. This is the common interface for the
Synopsys Designware IP.
If you have a controller with this interface, say Y or M here.
If unsure, say Y.
config MMC_DW_EXYNOS
tristate "Exynos specific extensions for Synopsys DW Memory Card Interface"
depends on MMC_DW
select MMC_DW_PLTFM
help
This selects support for Samsung Exynos SoC specific extensions to the
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on Exynos4 and Exynos5 SoC's.
config MMC_DW_K3
tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
depends on MMC_DW
select MMC_DW_PLTFM
help
This selects support for Hisilicon K3 SoC specific extensions to the
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on Hisilicon K3 SoC's.
config MMC_DW_PCI
tristate "Synopsys Designware MCI support on PCI bus"
depends on MMC_DW && PCI
help
This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
Select this option if the IP is present on PCI platform.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_DW_ROCKCHIP
tristate "Rockchip specific extensions for Synopsys DW Memory Card Interface"
depends on MMC_DW && ARCH_ROCKCHIP
select MMC_DW_PLTFM
help
This selects support for Rockchip SoC specific extensions to the
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on RK3066, RK3188 and RK3288 SoC's.
config MMC_DW_ZX
tristate "ZTE specific extensions for Synopsys DW Memory Card Interface"
depends on MMC_DW && ARCH_ZX
select MMC_DW_PLTFM
help
This selects support for ZTE SoC specific extensions to the
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on ZX296718 SoC's.
config MMC_SH_MMCIF
tristate "SuperH Internal MMCIF support"
depends on HAS_DMA
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
help
This selects the MMC Host Interface controller (MMCIF) found in various
Renesas SoCs for SH and ARM architectures.
config MMC_JZ4740
tristate "JZ4740 SD/Multimedia Card Interface support"
depends on MACH_JZ4740
help
This selects support for the SD/MMC controller on Ingenic JZ4740
SoCs.
If you have a board based on such a SoC and with a SD/MMC slot,
say Y or M here.
config MMC_VUB300
tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
depends on USB
help
This selects support for Elan Digital Systems' VUB300 chip.
The VUB300 is a USB-SDIO Host Controller Interface chip
that enables the host computer to use SDIO/SD/MMC cards
via a USB 2.0 or USB 1.1 host.
The VUB300 chip will be found in both physically separate
USB to SDIO/SD/MMC adapters and embedded on some motherboards.
The VUB300 chip supports SD and MMC memory cards in addition
to single and multifunction SDIO cards.
Some SDIO cards will need a firmware file to be loaded and
sent to VUB300 chip in order to achieve better data throughput.
Download these "Offload Pseudocode" from Elan Digital Systems'
web-site http://www.elandigitalsystems.com/support/downloads.php
and put them in /lib/firmware. Note that without these additional
firmware files the VUB300 chip will still function, but not at
the best obtainable data rate.
To compile this mmc host controller driver as a module,
choose M here: the module will be called vub300.
If you have a computer with an embedded VUB300 chip
or if you intend connecting a USB adapter based on a
VUB300 chip say Y or M here.
config MMC_USHC
tristate "USB SD Host Controller (USHC) support"
depends on USB
help
This selects support for USB SD Host Controllers based on
the Cypress Astoria chip with firmware compliant with CSR's
USB SD Host Controller specification (CS-118793-SP).
CSR boards with this device include: USB<>SDIO (M1985v2),
and Ultrasira.
Note: These controllers only support SDIO cards and do not
support MMC or SD memory cards.
config MMC_WMT
tristate "Wondermedia SD/MMC Host Controller support"
depends on ARCH_VT8500
default y
help
This selects support for the SD/MMC Host Controller on
Wondermedia WM8505/WM8650 based SoCs.
To compile this driver as a module, choose M here: the
module will be called wmt-sdmmc.
config MMC_USDHI6ROL0
tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
depends on HAS_DMA
help
This selects support for the Renesas USDHI6ROL0 SD/SDIO
Host Controller
config MMC_REALTEK_PCI
tristate "Realtek PCI-E SD/MMC Card Interface Driver"
depends on MISC_RTSX_PCI
help
Say Y here to include driver code to support SD/MMC card interface
of Realtek PCI-E card reader
config MMC_REALTEK_USB
tristate "Realtek USB SD/MMC Card Interface Driver"
depends on MISC_RTSX_USB
help
Say Y here to include driver code to support SD/MMC card interface
of Realtek RTS5129/39 series card reader
config MMC_SUNXI
tristate "Allwinner sunxi SD/MMC Host Controller support"
depends on ARCH_SUNXI
help
This selects support for the SD/MMC Host Controller on
Allwinner sunxi SoCs.
config MMC_CQHCI
tristate "Command Queue Host Controller Interface support"
depends on HAS_DMA
help
This selects the Command Queue Host Controller Interface (CQHCI)
support present in host controllers of Qualcomm Technologies, Inc
amongst others.
This controller supports eMMC devices with command queue support.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_TOSHIBA_PCI
tristate "Toshiba Type A SD/MMC Card Interface Driver"
depends on PCI
help
config MMC_BCM2835
tristate "Broadcom BCM2835 SDHOST MMC Controller support"
depends on ARCH_BCM2835 || COMPILE_TEST
depends on HAS_DMA
help
This selects the BCM2835 SDHOST MMC controller. If you have
a BCM2835 platform with SD or MMC devices, say Y or M here.
Note that the BCM2835 has two SD controllers: The Arasan
sdhci controller (supported by MMC_SDHCI_IPROC) and a custom
sdhost controller (supported by this driver).
If unsure, say N.
config MMC_MTK
tristate "MediaTek SD/MMC Card Interface support"
depends on HAS_DMA
help
This selects the MediaTek(R) Secure digital and Multimedia card Interface.
If you have a machine with a integrated SD/MMC card reader, say Y or M here.
This is needed if support for any SD/SDIO/MMC devices is required.
If unsure, say N.
config MMC_SDHCI_MICROCHIP_PIC32
tristate "Microchip PIC32MZDA SDHCI support"
depends on MMC_SDHCI && PIC32MZDA && MMC_SDHCI_PLTFM
help
This selects the Secure Digital Host Controller Interface (SDHCI)
for PIC32MZDA platform.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_BRCMSTB
tristate "Broadcom SDIO/SD/MMC support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC
depends on MMC_SDHCI_PLTFM
default y
help
This selects support for the SDIO/SD/MMC Host Controller on
Broadcom STB SoCs.
If unsure, say Y.
config MMC_SDHCI_XENON
tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
depends on MMC_SDHCI_PLTFM
help
This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_OMAP
tristate "TI SDHCI Controller Support"
depends on MMC_SDHCI_PLTFM && OF
help
This selects the Secure Digital Host Controller Interface (SDHCI)
support present in TI's DRA7 SOCs. The controller supports
SD/MMC/SDIO devices.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
Reference in New Issue View Git Blame Copy Permalink