mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 12:05:10 +07:00
7cbb540a3a
GCC_MSS_AXIS2 clock is used for disabling boot IMEM (a part of AP boot up). With Boot IMEM disable now a part TZ/ATF, AXIS2 clock is no longer required post AP boot up and expected to remain untouched. However if the clock is turned ON after Q6 is brought out of reset and later turned off, it results in modem hang. When Q6 attempts a power collapse the internal handshaking to check if AXIS2 is idle never goes through since it is turned off preventing the RSC from getting triggered, leaving modem in a funky state. Hence removing AXIS2 clk enable/disable from the driver. Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
1379 lines
33 KiB
C
1379 lines
33 KiB
C
/*
|
|
* Qualcomm Peripheral Image Loader
|
|
*
|
|
* Copyright (C) 2016 Linaro Ltd.
|
|
* Copyright (C) 2014 Sony Mobile Communications AB
|
|
* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/remoteproc.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/soc/qcom/mdt_loader.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
#include "remoteproc_internal.h"
|
|
#include "qcom_common.h"
|
|
#include "qcom_q6v5.h"
|
|
|
|
#include <linux/qcom_scm.h>
|
|
|
|
#define MPSS_CRASH_REASON_SMEM 421
|
|
|
|
/* RMB Status Register Values */
|
|
#define RMB_PBL_SUCCESS 0x1
|
|
|
|
#define RMB_MBA_XPU_UNLOCKED 0x1
|
|
#define RMB_MBA_XPU_UNLOCKED_SCRIBBLED 0x2
|
|
#define RMB_MBA_META_DATA_AUTH_SUCCESS 0x3
|
|
#define RMB_MBA_AUTH_COMPLETE 0x4
|
|
|
|
/* PBL/MBA interface registers */
|
|
#define RMB_MBA_IMAGE_REG 0x00
|
|
#define RMB_PBL_STATUS_REG 0x04
|
|
#define RMB_MBA_COMMAND_REG 0x08
|
|
#define RMB_MBA_STATUS_REG 0x0C
|
|
#define RMB_PMI_META_DATA_REG 0x10
|
|
#define RMB_PMI_CODE_START_REG 0x14
|
|
#define RMB_PMI_CODE_LENGTH_REG 0x18
|
|
#define RMB_MBA_MSS_STATUS 0x40
|
|
#define RMB_MBA_ALT_RESET 0x44
|
|
|
|
#define RMB_CMD_META_DATA_READY 0x1
|
|
#define RMB_CMD_LOAD_READY 0x2
|
|
|
|
/* QDSP6SS Register Offsets */
|
|
#define QDSP6SS_RESET_REG 0x014
|
|
#define QDSP6SS_GFMUX_CTL_REG 0x020
|
|
#define QDSP6SS_PWR_CTL_REG 0x030
|
|
#define QDSP6SS_MEM_PWR_CTL 0x0B0
|
|
#define QDSP6SS_STRAP_ACC 0x110
|
|
|
|
/* AXI Halt Register Offsets */
|
|
#define AXI_HALTREQ_REG 0x0
|
|
#define AXI_HALTACK_REG 0x4
|
|
#define AXI_IDLE_REG 0x8
|
|
|
|
#define HALT_ACK_TIMEOUT_MS 100
|
|
|
|
/* QDSP6SS_RESET */
|
|
#define Q6SS_STOP_CORE BIT(0)
|
|
#define Q6SS_CORE_ARES BIT(1)
|
|
#define Q6SS_BUS_ARES_ENABLE BIT(2)
|
|
|
|
/* QDSP6SS_GFMUX_CTL */
|
|
#define Q6SS_CLK_ENABLE BIT(1)
|
|
|
|
/* QDSP6SS_PWR_CTL */
|
|
#define Q6SS_L2DATA_SLP_NRET_N_0 BIT(0)
|
|
#define Q6SS_L2DATA_SLP_NRET_N_1 BIT(1)
|
|
#define Q6SS_L2DATA_SLP_NRET_N_2 BIT(2)
|
|
#define Q6SS_L2TAG_SLP_NRET_N BIT(16)
|
|
#define Q6SS_ETB_SLP_NRET_N BIT(17)
|
|
#define Q6SS_L2DATA_STBY_N BIT(18)
|
|
#define Q6SS_SLP_RET_N BIT(19)
|
|
#define Q6SS_CLAMP_IO BIT(20)
|
|
#define QDSS_BHS_ON BIT(21)
|
|
#define QDSS_LDO_BYP BIT(22)
|
|
|
|
/* QDSP6v56 parameters */
|
|
#define QDSP6v56_LDO_BYP BIT(25)
|
|
#define QDSP6v56_BHS_ON BIT(24)
|
|
#define QDSP6v56_CLAMP_WL BIT(21)
|
|
#define QDSP6v56_CLAMP_QMC_MEM BIT(22)
|
|
#define HALT_CHECK_MAX_LOOPS 200
|
|
#define QDSP6SS_XO_CBCR 0x0038
|
|
#define QDSP6SS_ACC_OVERRIDE_VAL 0x20
|
|
|
|
/* QDSP6v65 parameters */
|
|
#define QDSP6SS_SLEEP 0x3C
|
|
#define QDSP6SS_BOOT_CORE_START 0x400
|
|
#define QDSP6SS_BOOT_CMD 0x404
|
|
#define SLEEP_CHECK_MAX_LOOPS 200
|
|
#define BOOT_FSM_TIMEOUT 10000
|
|
|
|
struct reg_info {
|
|
struct regulator *reg;
|
|
int uV;
|
|
int uA;
|
|
};
|
|
|
|
struct qcom_mss_reg_res {
|
|
const char *supply;
|
|
int uV;
|
|
int uA;
|
|
};
|
|
|
|
struct rproc_hexagon_res {
|
|
const char *hexagon_mba_image;
|
|
struct qcom_mss_reg_res *proxy_supply;
|
|
struct qcom_mss_reg_res *active_supply;
|
|
char **proxy_clk_names;
|
|
char **reset_clk_names;
|
|
char **active_clk_names;
|
|
int version;
|
|
bool need_mem_protection;
|
|
bool has_alt_reset;
|
|
};
|
|
|
|
struct q6v5 {
|
|
struct device *dev;
|
|
struct rproc *rproc;
|
|
|
|
void __iomem *reg_base;
|
|
void __iomem *rmb_base;
|
|
|
|
struct regmap *halt_map;
|
|
u32 halt_q6;
|
|
u32 halt_modem;
|
|
u32 halt_nc;
|
|
|
|
struct reset_control *mss_restart;
|
|
|
|
struct qcom_q6v5 q6v5;
|
|
|
|
struct clk *active_clks[8];
|
|
struct clk *reset_clks[4];
|
|
struct clk *proxy_clks[4];
|
|
int active_clk_count;
|
|
int reset_clk_count;
|
|
int proxy_clk_count;
|
|
|
|
struct reg_info active_regs[1];
|
|
struct reg_info proxy_regs[3];
|
|
int active_reg_count;
|
|
int proxy_reg_count;
|
|
|
|
bool running;
|
|
|
|
phys_addr_t mba_phys;
|
|
void *mba_region;
|
|
size_t mba_size;
|
|
|
|
phys_addr_t mpss_phys;
|
|
phys_addr_t mpss_reloc;
|
|
void *mpss_region;
|
|
size_t mpss_size;
|
|
|
|
struct qcom_rproc_glink glink_subdev;
|
|
struct qcom_rproc_subdev smd_subdev;
|
|
struct qcom_rproc_ssr ssr_subdev;
|
|
struct qcom_sysmon *sysmon;
|
|
bool need_mem_protection;
|
|
bool has_alt_reset;
|
|
int mpss_perm;
|
|
int mba_perm;
|
|
int version;
|
|
};
|
|
|
|
enum {
|
|
MSS_MSM8916,
|
|
MSS_MSM8974,
|
|
MSS_MSM8996,
|
|
MSS_SDM845,
|
|
};
|
|
|
|
static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
|
|
const struct qcom_mss_reg_res *reg_res)
|
|
{
|
|
int rc;
|
|
int i;
|
|
|
|
if (!reg_res)
|
|
return 0;
|
|
|
|
for (i = 0; reg_res[i].supply; i++) {
|
|
regs[i].reg = devm_regulator_get(dev, reg_res[i].supply);
|
|
if (IS_ERR(regs[i].reg)) {
|
|
rc = PTR_ERR(regs[i].reg);
|
|
if (rc != -EPROBE_DEFER)
|
|
dev_err(dev, "Failed to get %s\n regulator",
|
|
reg_res[i].supply);
|
|
return rc;
|
|
}
|
|
|
|
regs[i].uV = reg_res[i].uV;
|
|
regs[i].uA = reg_res[i].uA;
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
static int q6v5_regulator_enable(struct q6v5 *qproc,
|
|
struct reg_info *regs, int count)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
if (regs[i].uV > 0) {
|
|
ret = regulator_set_voltage(regs[i].reg,
|
|
regs[i].uV, INT_MAX);
|
|
if (ret) {
|
|
dev_err(qproc->dev,
|
|
"Failed to request voltage for %d.\n",
|
|
i);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
if (regs[i].uA > 0) {
|
|
ret = regulator_set_load(regs[i].reg,
|
|
regs[i].uA);
|
|
if (ret < 0) {
|
|
dev_err(qproc->dev,
|
|
"Failed to set regulator mode\n");
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
ret = regulator_enable(regs[i].reg);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "Regulator enable failed\n");
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
for (; i >= 0; i--) {
|
|
if (regs[i].uV > 0)
|
|
regulator_set_voltage(regs[i].reg, 0, INT_MAX);
|
|
|
|
if (regs[i].uA > 0)
|
|
regulator_set_load(regs[i].reg, 0);
|
|
|
|
regulator_disable(regs[i].reg);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void q6v5_regulator_disable(struct q6v5 *qproc,
|
|
struct reg_info *regs, int count)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
if (regs[i].uV > 0)
|
|
regulator_set_voltage(regs[i].reg, 0, INT_MAX);
|
|
|
|
if (regs[i].uA > 0)
|
|
regulator_set_load(regs[i].reg, 0);
|
|
|
|
regulator_disable(regs[i].reg);
|
|
}
|
|
}
|
|
|
|
static int q6v5_clk_enable(struct device *dev,
|
|
struct clk **clks, int count)
|
|
{
|
|
int rc;
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
rc = clk_prepare_enable(clks[i]);
|
|
if (rc) {
|
|
dev_err(dev, "Clock enable failed\n");
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
for (i--; i >= 0; i--)
|
|
clk_disable_unprepare(clks[i]);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void q6v5_clk_disable(struct device *dev,
|
|
struct clk **clks, int count)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++)
|
|
clk_disable_unprepare(clks[i]);
|
|
}
|
|
|
|
static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
|
|
bool remote_owner, phys_addr_t addr,
|
|
size_t size)
|
|
{
|
|
struct qcom_scm_vmperm next;
|
|
|
|
if (!qproc->need_mem_protection)
|
|
return 0;
|
|
if (remote_owner && *current_perm == BIT(QCOM_SCM_VMID_MSS_MSA))
|
|
return 0;
|
|
if (!remote_owner && *current_perm == BIT(QCOM_SCM_VMID_HLOS))
|
|
return 0;
|
|
|
|
next.vmid = remote_owner ? QCOM_SCM_VMID_MSS_MSA : QCOM_SCM_VMID_HLOS;
|
|
next.perm = remote_owner ? QCOM_SCM_PERM_RW : QCOM_SCM_PERM_RWX;
|
|
|
|
return qcom_scm_assign_mem(addr, ALIGN(size, SZ_4K),
|
|
current_perm, &next, 1);
|
|
}
|
|
|
|
static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
|
|
{
|
|
struct q6v5 *qproc = rproc->priv;
|
|
|
|
memcpy(qproc->mba_region, fw->data, fw->size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int q6v5_reset_assert(struct q6v5 *qproc)
|
|
{
|
|
if (qproc->has_alt_reset)
|
|
return reset_control_reset(qproc->mss_restart);
|
|
else
|
|
return reset_control_assert(qproc->mss_restart);
|
|
}
|
|
|
|
static int q6v5_reset_deassert(struct q6v5 *qproc)
|
|
{
|
|
int ret;
|
|
|
|
if (qproc->has_alt_reset) {
|
|
writel(1, qproc->rmb_base + RMB_MBA_ALT_RESET);
|
|
ret = reset_control_reset(qproc->mss_restart);
|
|
writel(0, qproc->rmb_base + RMB_MBA_ALT_RESET);
|
|
} else {
|
|
ret = reset_control_deassert(qproc->mss_restart);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int q6v5_rmb_pbl_wait(struct q6v5 *qproc, int ms)
|
|
{
|
|
unsigned long timeout;
|
|
s32 val;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(ms);
|
|
for (;;) {
|
|
val = readl(qproc->rmb_base + RMB_PBL_STATUS_REG);
|
|
if (val)
|
|
break;
|
|
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIMEDOUT;
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static int q6v5_rmb_mba_wait(struct q6v5 *qproc, u32 status, int ms)
|
|
{
|
|
|
|
unsigned long timeout;
|
|
s32 val;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(ms);
|
|
for (;;) {
|
|
val = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
|
|
if (val < 0)
|
|
break;
|
|
|
|
if (!status && val)
|
|
break;
|
|
else if (status && val == status)
|
|
break;
|
|
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIMEDOUT;
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static int q6v5proc_reset(struct q6v5 *qproc)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
int i;
|
|
|
|
if (qproc->version == MSS_SDM845) {
|
|
val = readl(qproc->reg_base + QDSP6SS_SLEEP);
|
|
val |= 0x1;
|
|
writel(val, qproc->reg_base + QDSP6SS_SLEEP);
|
|
|
|
ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_SLEEP,
|
|
val, !(val & BIT(31)), 1,
|
|
SLEEP_CHECK_MAX_LOOPS);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "QDSP6SS Sleep clock timed out\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* De-assert QDSP6 stop core */
|
|
writel(1, qproc->reg_base + QDSP6SS_BOOT_CORE_START);
|
|
/* Trigger boot FSM */
|
|
writel(1, qproc->reg_base + QDSP6SS_BOOT_CMD);
|
|
|
|
ret = readl_poll_timeout(qproc->rmb_base + RMB_MBA_MSS_STATUS,
|
|
val, (val & BIT(0)) != 0, 10, BOOT_FSM_TIMEOUT);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "Boot FSM failed to complete.\n");
|
|
/* Reset the modem so that boot FSM is in reset state */
|
|
q6v5_reset_deassert(qproc);
|
|
return ret;
|
|
}
|
|
|
|
goto pbl_wait;
|
|
} else if (qproc->version == MSS_MSM8996) {
|
|
/* Override the ACC value if required */
|
|
writel(QDSP6SS_ACC_OVERRIDE_VAL,
|
|
qproc->reg_base + QDSP6SS_STRAP_ACC);
|
|
|
|
/* Assert resets, stop core */
|
|
val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
|
|
val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE;
|
|
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
|
|
|
|
/* BHS require xo cbcr to be enabled */
|
|
val = readl(qproc->reg_base + QDSP6SS_XO_CBCR);
|
|
val |= 0x1;
|
|
writel(val, qproc->reg_base + QDSP6SS_XO_CBCR);
|
|
|
|
/* Read CLKOFF bit to go low indicating CLK is enabled */
|
|
ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_XO_CBCR,
|
|
val, !(val & BIT(31)), 1,
|
|
HALT_CHECK_MAX_LOOPS);
|
|
if (ret) {
|
|
dev_err(qproc->dev,
|
|
"xo cbcr enabling timed out (rc:%d)\n", ret);
|
|
return ret;
|
|
}
|
|
/* Enable power block headswitch and wait for it to stabilize */
|
|
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val |= QDSP6v56_BHS_ON;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
udelay(1);
|
|
|
|
/* Put LDO in bypass mode */
|
|
val |= QDSP6v56_LDO_BYP;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
|
|
/* Deassert QDSP6 compiler memory clamp */
|
|
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val &= ~QDSP6v56_CLAMP_QMC_MEM;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
|
|
/* Deassert memory peripheral sleep and L2 memory standby */
|
|
val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
|
|
/* Turn on L1, L2, ETB and JU memories 1 at a time */
|
|
val = readl(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
|
|
for (i = 19; i >= 0; i--) {
|
|
val |= BIT(i);
|
|
writel(val, qproc->reg_base +
|
|
QDSP6SS_MEM_PWR_CTL);
|
|
/*
|
|
* Read back value to ensure the write is done then
|
|
* wait for 1us for both memory peripheral and data
|
|
* array to turn on.
|
|
*/
|
|
val |= readl(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
|
|
udelay(1);
|
|
}
|
|
/* Remove word line clamp */
|
|
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val &= ~QDSP6v56_CLAMP_WL;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
} else {
|
|
/* Assert resets, stop core */
|
|
val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
|
|
val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE;
|
|
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
|
|
|
|
/* Enable power block headswitch and wait for it to stabilize */
|
|
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val |= QDSS_BHS_ON | QDSS_LDO_BYP;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
udelay(1);
|
|
/*
|
|
* Turn on memories. L2 banks should be done individually
|
|
* to minimize inrush current.
|
|
*/
|
|
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val |= Q6SS_SLP_RET_N | Q6SS_L2TAG_SLP_NRET_N |
|
|
Q6SS_ETB_SLP_NRET_N | Q6SS_L2DATA_STBY_N;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val |= Q6SS_L2DATA_SLP_NRET_N_2;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val |= Q6SS_L2DATA_SLP_NRET_N_1;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val |= Q6SS_L2DATA_SLP_NRET_N_0;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
}
|
|
/* Remove IO clamp */
|
|
val &= ~Q6SS_CLAMP_IO;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
|
|
/* Bring core out of reset */
|
|
val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
|
|
val &= ~Q6SS_CORE_ARES;
|
|
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
|
|
|
|
/* Turn on core clock */
|
|
val = readl(qproc->reg_base + QDSP6SS_GFMUX_CTL_REG);
|
|
val |= Q6SS_CLK_ENABLE;
|
|
writel(val, qproc->reg_base + QDSP6SS_GFMUX_CTL_REG);
|
|
|
|
/* Start core execution */
|
|
val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
|
|
val &= ~Q6SS_STOP_CORE;
|
|
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
|
|
|
|
pbl_wait:
|
|
/* Wait for PBL status */
|
|
ret = q6v5_rmb_pbl_wait(qproc, 1000);
|
|
if (ret == -ETIMEDOUT) {
|
|
dev_err(qproc->dev, "PBL boot timed out\n");
|
|
} else if (ret != RMB_PBL_SUCCESS) {
|
|
dev_err(qproc->dev, "PBL returned unexpected status %d\n", ret);
|
|
ret = -EINVAL;
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void q6v5proc_halt_axi_port(struct q6v5 *qproc,
|
|
struct regmap *halt_map,
|
|
u32 offset)
|
|
{
|
|
unsigned long timeout;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
/* Check if we're already idle */
|
|
ret = regmap_read(halt_map, offset + AXI_IDLE_REG, &val);
|
|
if (!ret && val)
|
|
return;
|
|
|
|
/* Assert halt request */
|
|
regmap_write(halt_map, offset + AXI_HALTREQ_REG, 1);
|
|
|
|
/* Wait for halt */
|
|
timeout = jiffies + msecs_to_jiffies(HALT_ACK_TIMEOUT_MS);
|
|
for (;;) {
|
|
ret = regmap_read(halt_map, offset + AXI_HALTACK_REG, &val);
|
|
if (ret || val || time_after(jiffies, timeout))
|
|
break;
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
ret = regmap_read(halt_map, offset + AXI_IDLE_REG, &val);
|
|
if (ret || !val)
|
|
dev_err(qproc->dev, "port failed halt\n");
|
|
|
|
/* Clear halt request (port will remain halted until reset) */
|
|
regmap_write(halt_map, offset + AXI_HALTREQ_REG, 0);
|
|
}
|
|
|
|
static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
|
|
{
|
|
unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
|
|
dma_addr_t phys;
|
|
int mdata_perm;
|
|
int xferop_ret;
|
|
void *ptr;
|
|
int ret;
|
|
|
|
ptr = dma_alloc_attrs(qproc->dev, fw->size, &phys, GFP_KERNEL, dma_attrs);
|
|
if (!ptr) {
|
|
dev_err(qproc->dev, "failed to allocate mdt buffer\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memcpy(ptr, fw->data, fw->size);
|
|
|
|
/* Hypervisor mapping to access metadata by modem */
|
|
mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
|
|
ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm,
|
|
true, phys, fw->size);
|
|
if (ret) {
|
|
dev_err(qproc->dev,
|
|
"assigning Q6 access to metadata failed: %d\n", ret);
|
|
ret = -EAGAIN;
|
|
goto free_dma_attrs;
|
|
}
|
|
|
|
writel(phys, qproc->rmb_base + RMB_PMI_META_DATA_REG);
|
|
writel(RMB_CMD_META_DATA_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
|
|
|
|
ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_META_DATA_AUTH_SUCCESS, 1000);
|
|
if (ret == -ETIMEDOUT)
|
|
dev_err(qproc->dev, "MPSS header authentication timed out\n");
|
|
else if (ret < 0)
|
|
dev_err(qproc->dev, "MPSS header authentication failed: %d\n", ret);
|
|
|
|
/* Metadata authentication done, remove modem access */
|
|
xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm,
|
|
false, phys, fw->size);
|
|
if (xferop_ret)
|
|
dev_warn(qproc->dev,
|
|
"mdt buffer not reclaimed system may become unstable\n");
|
|
|
|
free_dma_attrs:
|
|
dma_free_attrs(qproc->dev, fw->size, ptr, phys, dma_attrs);
|
|
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
|
|
static bool q6v5_phdr_valid(const struct elf32_phdr *phdr)
|
|
{
|
|
if (phdr->p_type != PT_LOAD)
|
|
return false;
|
|
|
|
if ((phdr->p_flags & QCOM_MDT_TYPE_MASK) == QCOM_MDT_TYPE_HASH)
|
|
return false;
|
|
|
|
if (!phdr->p_memsz)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int q6v5_mpss_load(struct q6v5 *qproc)
|
|
{
|
|
const struct elf32_phdr *phdrs;
|
|
const struct elf32_phdr *phdr;
|
|
const struct firmware *seg_fw;
|
|
const struct firmware *fw;
|
|
struct elf32_hdr *ehdr;
|
|
phys_addr_t mpss_reloc;
|
|
phys_addr_t boot_addr;
|
|
phys_addr_t min_addr = PHYS_ADDR_MAX;
|
|
phys_addr_t max_addr = 0;
|
|
bool relocate = false;
|
|
char seg_name[10];
|
|
ssize_t offset;
|
|
size_t size = 0;
|
|
void *ptr;
|
|
int ret;
|
|
int i;
|
|
|
|
ret = request_firmware(&fw, "modem.mdt", qproc->dev);
|
|
if (ret < 0) {
|
|
dev_err(qproc->dev, "unable to load modem.mdt\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Initialize the RMB validator */
|
|
writel(0, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
|
|
|
|
ret = q6v5_mpss_init_image(qproc, fw);
|
|
if (ret)
|
|
goto release_firmware;
|
|
|
|
ehdr = (struct elf32_hdr *)fw->data;
|
|
phdrs = (struct elf32_phdr *)(ehdr + 1);
|
|
|
|
for (i = 0; i < ehdr->e_phnum; i++) {
|
|
phdr = &phdrs[i];
|
|
|
|
if (!q6v5_phdr_valid(phdr))
|
|
continue;
|
|
|
|
if (phdr->p_flags & QCOM_MDT_RELOCATABLE)
|
|
relocate = true;
|
|
|
|
if (phdr->p_paddr < min_addr)
|
|
min_addr = phdr->p_paddr;
|
|
|
|
if (phdr->p_paddr + phdr->p_memsz > max_addr)
|
|
max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
|
|
}
|
|
|
|
mpss_reloc = relocate ? min_addr : qproc->mpss_phys;
|
|
/* Load firmware segments */
|
|
for (i = 0; i < ehdr->e_phnum; i++) {
|
|
phdr = &phdrs[i];
|
|
|
|
if (!q6v5_phdr_valid(phdr))
|
|
continue;
|
|
|
|
offset = phdr->p_paddr - mpss_reloc;
|
|
if (offset < 0 || offset + phdr->p_memsz > qproc->mpss_size) {
|
|
dev_err(qproc->dev, "segment outside memory range\n");
|
|
ret = -EINVAL;
|
|
goto release_firmware;
|
|
}
|
|
|
|
ptr = qproc->mpss_region + offset;
|
|
|
|
if (phdr->p_filesz) {
|
|
snprintf(seg_name, sizeof(seg_name), "modem.b%02d", i);
|
|
ret = request_firmware(&seg_fw, seg_name, qproc->dev);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "failed to load %s\n", seg_name);
|
|
goto release_firmware;
|
|
}
|
|
|
|
memcpy(ptr, seg_fw->data, seg_fw->size);
|
|
|
|
release_firmware(seg_fw);
|
|
}
|
|
|
|
if (phdr->p_memsz > phdr->p_filesz) {
|
|
memset(ptr + phdr->p_filesz, 0,
|
|
phdr->p_memsz - phdr->p_filesz);
|
|
}
|
|
size += phdr->p_memsz;
|
|
}
|
|
|
|
/* Transfer ownership of modem ddr region to q6 */
|
|
ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true,
|
|
qproc->mpss_phys, qproc->mpss_size);
|
|
if (ret) {
|
|
dev_err(qproc->dev,
|
|
"assigning Q6 access to mpss memory failed: %d\n", ret);
|
|
ret = -EAGAIN;
|
|
goto release_firmware;
|
|
}
|
|
|
|
boot_addr = relocate ? qproc->mpss_phys : min_addr;
|
|
writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
|
|
writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
|
|
writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
|
|
|
|
ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000);
|
|
if (ret == -ETIMEDOUT)
|
|
dev_err(qproc->dev, "MPSS authentication timed out\n");
|
|
else if (ret < 0)
|
|
dev_err(qproc->dev, "MPSS authentication failed: %d\n", ret);
|
|
|
|
release_firmware:
|
|
release_firmware(fw);
|
|
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
|
|
static int q6v5_start(struct rproc *rproc)
|
|
{
|
|
struct q6v5 *qproc = (struct q6v5 *)rproc->priv;
|
|
int xfermemop_ret;
|
|
int ret;
|
|
|
|
qcom_q6v5_prepare(&qproc->q6v5);
|
|
|
|
ret = q6v5_regulator_enable(qproc, qproc->proxy_regs,
|
|
qproc->proxy_reg_count);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "failed to enable proxy supplies\n");
|
|
goto disable_irqs;
|
|
}
|
|
|
|
ret = q6v5_clk_enable(qproc->dev, qproc->proxy_clks,
|
|
qproc->proxy_clk_count);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "failed to enable proxy clocks\n");
|
|
goto disable_proxy_reg;
|
|
}
|
|
|
|
ret = q6v5_regulator_enable(qproc, qproc->active_regs,
|
|
qproc->active_reg_count);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "failed to enable supplies\n");
|
|
goto disable_proxy_clk;
|
|
}
|
|
|
|
ret = q6v5_clk_enable(qproc->dev, qproc->reset_clks,
|
|
qproc->reset_clk_count);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "failed to enable reset clocks\n");
|
|
goto disable_vdd;
|
|
}
|
|
|
|
ret = q6v5_reset_deassert(qproc);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "failed to deassert mss restart\n");
|
|
goto disable_reset_clks;
|
|
}
|
|
|
|
ret = q6v5_clk_enable(qproc->dev, qproc->active_clks,
|
|
qproc->active_clk_count);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "failed to enable clocks\n");
|
|
goto assert_reset;
|
|
}
|
|
|
|
/* Assign MBA image access in DDR to q6 */
|
|
ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
|
|
qproc->mba_phys, qproc->mba_size);
|
|
if (ret) {
|
|
dev_err(qproc->dev,
|
|
"assigning Q6 access to mba memory failed: %d\n", ret);
|
|
goto disable_active_clks;
|
|
}
|
|
|
|
writel(qproc->mba_phys, qproc->rmb_base + RMB_MBA_IMAGE_REG);
|
|
|
|
ret = q6v5proc_reset(qproc);
|
|
if (ret)
|
|
goto reclaim_mba;
|
|
|
|
ret = q6v5_rmb_mba_wait(qproc, 0, 5000);
|
|
if (ret == -ETIMEDOUT) {
|
|
dev_err(qproc->dev, "MBA boot timed out\n");
|
|
goto halt_axi_ports;
|
|
} else if (ret != RMB_MBA_XPU_UNLOCKED &&
|
|
ret != RMB_MBA_XPU_UNLOCKED_SCRIBBLED) {
|
|
dev_err(qproc->dev, "MBA returned unexpected status %d\n", ret);
|
|
ret = -EINVAL;
|
|
goto halt_axi_ports;
|
|
}
|
|
|
|
dev_info(qproc->dev, "MBA booted, loading mpss\n");
|
|
|
|
ret = q6v5_mpss_load(qproc);
|
|
if (ret)
|
|
goto reclaim_mpss;
|
|
|
|
ret = qcom_q6v5_wait_for_start(&qproc->q6v5, msecs_to_jiffies(5000));
|
|
if (ret == -ETIMEDOUT) {
|
|
dev_err(qproc->dev, "start timed out\n");
|
|
goto reclaim_mpss;
|
|
}
|
|
|
|
xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
|
|
qproc->mba_phys,
|
|
qproc->mba_size);
|
|
if (xfermemop_ret)
|
|
dev_err(qproc->dev,
|
|
"Failed to reclaim mba buffer system may become unstable\n");
|
|
qproc->running = true;
|
|
|
|
return 0;
|
|
|
|
reclaim_mpss:
|
|
xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
|
|
false, qproc->mpss_phys,
|
|
qproc->mpss_size);
|
|
WARN_ON(xfermemop_ret);
|
|
|
|
halt_axi_ports:
|
|
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
|
|
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
|
|
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
|
|
|
|
reclaim_mba:
|
|
xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
|
|
qproc->mba_phys,
|
|
qproc->mba_size);
|
|
if (xfermemop_ret) {
|
|
dev_err(qproc->dev,
|
|
"Failed to reclaim mba buffer, system may become unstable\n");
|
|
}
|
|
|
|
disable_active_clks:
|
|
q6v5_clk_disable(qproc->dev, qproc->active_clks,
|
|
qproc->active_clk_count);
|
|
|
|
assert_reset:
|
|
q6v5_reset_assert(qproc);
|
|
disable_reset_clks:
|
|
q6v5_clk_disable(qproc->dev, qproc->reset_clks,
|
|
qproc->reset_clk_count);
|
|
disable_vdd:
|
|
q6v5_regulator_disable(qproc, qproc->active_regs,
|
|
qproc->active_reg_count);
|
|
disable_proxy_clk:
|
|
q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
|
|
qproc->proxy_clk_count);
|
|
disable_proxy_reg:
|
|
q6v5_regulator_disable(qproc, qproc->proxy_regs,
|
|
qproc->proxy_reg_count);
|
|
|
|
disable_irqs:
|
|
qcom_q6v5_unprepare(&qproc->q6v5);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int q6v5_stop(struct rproc *rproc)
|
|
{
|
|
struct q6v5 *qproc = (struct q6v5 *)rproc->priv;
|
|
int ret;
|
|
u32 val;
|
|
|
|
qproc->running = false;
|
|
|
|
ret = qcom_q6v5_request_stop(&qproc->q6v5);
|
|
if (ret == -ETIMEDOUT)
|
|
dev_err(qproc->dev, "timed out on wait\n");
|
|
|
|
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
|
|
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
|
|
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
|
|
if (qproc->version == MSS_MSM8996) {
|
|
/*
|
|
* To avoid high MX current during LPASS/MSS restart.
|
|
*/
|
|
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
val |= Q6SS_CLAMP_IO | QDSP6v56_CLAMP_WL |
|
|
QDSP6v56_CLAMP_QMC_MEM;
|
|
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
|
|
}
|
|
|
|
|
|
ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
|
|
qproc->mpss_phys, qproc->mpss_size);
|
|
WARN_ON(ret);
|
|
|
|
q6v5_reset_assert(qproc);
|
|
|
|
ret = qcom_q6v5_unprepare(&qproc->q6v5);
|
|
if (ret) {
|
|
q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
|
|
qproc->proxy_clk_count);
|
|
q6v5_regulator_disable(qproc, qproc->proxy_regs,
|
|
qproc->proxy_reg_count);
|
|
}
|
|
|
|
q6v5_clk_disable(qproc->dev, qproc->reset_clks,
|
|
qproc->reset_clk_count);
|
|
q6v5_clk_disable(qproc->dev, qproc->active_clks,
|
|
qproc->active_clk_count);
|
|
q6v5_regulator_disable(qproc, qproc->active_regs,
|
|
qproc->active_reg_count);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void *q6v5_da_to_va(struct rproc *rproc, u64 da, int len)
|
|
{
|
|
struct q6v5 *qproc = rproc->priv;
|
|
int offset;
|
|
|
|
offset = da - qproc->mpss_reloc;
|
|
if (offset < 0 || offset + len > qproc->mpss_size)
|
|
return NULL;
|
|
|
|
return qproc->mpss_region + offset;
|
|
}
|
|
|
|
static const struct rproc_ops q6v5_ops = {
|
|
.start = q6v5_start,
|
|
.stop = q6v5_stop,
|
|
.da_to_va = q6v5_da_to_va,
|
|
.load = q6v5_load,
|
|
};
|
|
|
|
static void qcom_msa_handover(struct qcom_q6v5 *q6v5)
|
|
{
|
|
struct q6v5 *qproc = container_of(q6v5, struct q6v5, q6v5);
|
|
|
|
q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
|
|
qproc->proxy_clk_count);
|
|
q6v5_regulator_disable(qproc, qproc->proxy_regs,
|
|
qproc->proxy_reg_count);
|
|
}
|
|
|
|
static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
|
|
{
|
|
struct of_phandle_args args;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qdsp6");
|
|
qproc->reg_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(qproc->reg_base))
|
|
return PTR_ERR(qproc->reg_base);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rmb");
|
|
qproc->rmb_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(qproc->rmb_base))
|
|
return PTR_ERR(qproc->rmb_base);
|
|
|
|
ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
|
|
"qcom,halt-regs", 3, 0, &args);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
qproc->halt_map = syscon_node_to_regmap(args.np);
|
|
of_node_put(args.np);
|
|
if (IS_ERR(qproc->halt_map))
|
|
return PTR_ERR(qproc->halt_map);
|
|
|
|
qproc->halt_q6 = args.args[0];
|
|
qproc->halt_modem = args.args[1];
|
|
qproc->halt_nc = args.args[2];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int q6v5_init_clocks(struct device *dev, struct clk **clks,
|
|
char **clk_names)
|
|
{
|
|
int i;
|
|
|
|
if (!clk_names)
|
|
return 0;
|
|
|
|
for (i = 0; clk_names[i]; i++) {
|
|
clks[i] = devm_clk_get(dev, clk_names[i]);
|
|
if (IS_ERR(clks[i])) {
|
|
int rc = PTR_ERR(clks[i]);
|
|
|
|
if (rc != -EPROBE_DEFER)
|
|
dev_err(dev, "Failed to get %s clock\n",
|
|
clk_names[i]);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
static int q6v5_init_reset(struct q6v5 *qproc)
|
|
{
|
|
qproc->mss_restart = devm_reset_control_get_exclusive(qproc->dev,
|
|
NULL);
|
|
if (IS_ERR(qproc->mss_restart)) {
|
|
dev_err(qproc->dev, "failed to acquire mss restart\n");
|
|
return PTR_ERR(qproc->mss_restart);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int q6v5_alloc_memory_region(struct q6v5 *qproc)
|
|
{
|
|
struct device_node *child;
|
|
struct device_node *node;
|
|
struct resource r;
|
|
int ret;
|
|
|
|
child = of_get_child_by_name(qproc->dev->of_node, "mba");
|
|
node = of_parse_phandle(child, "memory-region", 0);
|
|
ret = of_address_to_resource(node, 0, &r);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "unable to resolve mba region\n");
|
|
return ret;
|
|
}
|
|
of_node_put(node);
|
|
|
|
qproc->mba_phys = r.start;
|
|
qproc->mba_size = resource_size(&r);
|
|
qproc->mba_region = devm_ioremap_wc(qproc->dev, qproc->mba_phys, qproc->mba_size);
|
|
if (!qproc->mba_region) {
|
|
dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n",
|
|
&r.start, qproc->mba_size);
|
|
return -EBUSY;
|
|
}
|
|
|
|
child = of_get_child_by_name(qproc->dev->of_node, "mpss");
|
|
node = of_parse_phandle(child, "memory-region", 0);
|
|
ret = of_address_to_resource(node, 0, &r);
|
|
if (ret) {
|
|
dev_err(qproc->dev, "unable to resolve mpss region\n");
|
|
return ret;
|
|
}
|
|
of_node_put(node);
|
|
|
|
qproc->mpss_phys = qproc->mpss_reloc = r.start;
|
|
qproc->mpss_size = resource_size(&r);
|
|
qproc->mpss_region = devm_ioremap_wc(qproc->dev, qproc->mpss_phys, qproc->mpss_size);
|
|
if (!qproc->mpss_region) {
|
|
dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n",
|
|
&r.start, qproc->mpss_size);
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int q6v5_probe(struct platform_device *pdev)
|
|
{
|
|
const struct rproc_hexagon_res *desc;
|
|
struct q6v5 *qproc;
|
|
struct rproc *rproc;
|
|
int ret;
|
|
|
|
desc = of_device_get_match_data(&pdev->dev);
|
|
if (!desc)
|
|
return -EINVAL;
|
|
|
|
rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_ops,
|
|
desc->hexagon_mba_image, sizeof(*qproc));
|
|
if (!rproc) {
|
|
dev_err(&pdev->dev, "failed to allocate rproc\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
qproc = (struct q6v5 *)rproc->priv;
|
|
qproc->dev = &pdev->dev;
|
|
qproc->rproc = rproc;
|
|
platform_set_drvdata(pdev, qproc);
|
|
|
|
ret = q6v5_init_mem(qproc, pdev);
|
|
if (ret)
|
|
goto free_rproc;
|
|
|
|
ret = q6v5_alloc_memory_region(qproc);
|
|
if (ret)
|
|
goto free_rproc;
|
|
|
|
ret = q6v5_init_clocks(&pdev->dev, qproc->proxy_clks,
|
|
desc->proxy_clk_names);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to get proxy clocks.\n");
|
|
goto free_rproc;
|
|
}
|
|
qproc->proxy_clk_count = ret;
|
|
|
|
ret = q6v5_init_clocks(&pdev->dev, qproc->reset_clks,
|
|
desc->reset_clk_names);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to get reset clocks.\n");
|
|
goto free_rproc;
|
|
}
|
|
qproc->reset_clk_count = ret;
|
|
|
|
ret = q6v5_init_clocks(&pdev->dev, qproc->active_clks,
|
|
desc->active_clk_names);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to get active clocks.\n");
|
|
goto free_rproc;
|
|
}
|
|
qproc->active_clk_count = ret;
|
|
|
|
ret = q6v5_regulator_init(&pdev->dev, qproc->proxy_regs,
|
|
desc->proxy_supply);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to get proxy regulators.\n");
|
|
goto free_rproc;
|
|
}
|
|
qproc->proxy_reg_count = ret;
|
|
|
|
ret = q6v5_regulator_init(&pdev->dev, qproc->active_regs,
|
|
desc->active_supply);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to get active regulators.\n");
|
|
goto free_rproc;
|
|
}
|
|
qproc->active_reg_count = ret;
|
|
|
|
ret = q6v5_init_reset(qproc);
|
|
if (ret)
|
|
goto free_rproc;
|
|
|
|
qproc->version = desc->version;
|
|
qproc->has_alt_reset = desc->has_alt_reset;
|
|
qproc->need_mem_protection = desc->need_mem_protection;
|
|
|
|
ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
|
|
qcom_msa_handover);
|
|
if (ret)
|
|
goto free_rproc;
|
|
|
|
qproc->mpss_perm = BIT(QCOM_SCM_VMID_HLOS);
|
|
qproc->mba_perm = BIT(QCOM_SCM_VMID_HLOS);
|
|
qcom_add_glink_subdev(rproc, &qproc->glink_subdev);
|
|
qcom_add_smd_subdev(rproc, &qproc->smd_subdev);
|
|
qcom_add_ssr_subdev(rproc, &qproc->ssr_subdev, "mpss");
|
|
qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12);
|
|
|
|
ret = rproc_add(rproc);
|
|
if (ret)
|
|
goto free_rproc;
|
|
|
|
return 0;
|
|
|
|
free_rproc:
|
|
rproc_free(rproc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int q6v5_remove(struct platform_device *pdev)
|
|
{
|
|
struct q6v5 *qproc = platform_get_drvdata(pdev);
|
|
|
|
rproc_del(qproc->rproc);
|
|
|
|
qcom_remove_sysmon_subdev(qproc->sysmon);
|
|
qcom_remove_glink_subdev(qproc->rproc, &qproc->glink_subdev);
|
|
qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
|
|
qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev);
|
|
rproc_free(qproc->rproc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct rproc_hexagon_res sdm845_mss = {
|
|
.hexagon_mba_image = "mba.mbn",
|
|
.proxy_clk_names = (char*[]){
|
|
"xo",
|
|
"prng",
|
|
NULL
|
|
},
|
|
.reset_clk_names = (char*[]){
|
|
"iface",
|
|
"snoc_axi",
|
|
NULL
|
|
},
|
|
.active_clk_names = (char*[]){
|
|
"bus",
|
|
"mem",
|
|
"gpll0_mss",
|
|
"mnoc_axi",
|
|
NULL
|
|
},
|
|
.need_mem_protection = true,
|
|
.has_alt_reset = true,
|
|
.version = MSS_SDM845,
|
|
};
|
|
|
|
static const struct rproc_hexagon_res msm8996_mss = {
|
|
.hexagon_mba_image = "mba.mbn",
|
|
.proxy_clk_names = (char*[]){
|
|
"xo",
|
|
"pnoc",
|
|
NULL
|
|
},
|
|
.active_clk_names = (char*[]){
|
|
"iface",
|
|
"bus",
|
|
"mem",
|
|
"gpll0_mss_clk",
|
|
NULL
|
|
},
|
|
.need_mem_protection = true,
|
|
.has_alt_reset = false,
|
|
.version = MSS_MSM8996,
|
|
};
|
|
|
|
static const struct rproc_hexagon_res msm8916_mss = {
|
|
.hexagon_mba_image = "mba.mbn",
|
|
.proxy_supply = (struct qcom_mss_reg_res[]) {
|
|
{
|
|
.supply = "mx",
|
|
.uV = 1050000,
|
|
},
|
|
{
|
|
.supply = "cx",
|
|
.uA = 100000,
|
|
},
|
|
{
|
|
.supply = "pll",
|
|
.uA = 100000,
|
|
},
|
|
{}
|
|
},
|
|
.proxy_clk_names = (char*[]){
|
|
"xo",
|
|
NULL
|
|
},
|
|
.active_clk_names = (char*[]){
|
|
"iface",
|
|
"bus",
|
|
"mem",
|
|
NULL
|
|
},
|
|
.need_mem_protection = false,
|
|
.has_alt_reset = false,
|
|
.version = MSS_MSM8916,
|
|
};
|
|
|
|
static const struct rproc_hexagon_res msm8974_mss = {
|
|
.hexagon_mba_image = "mba.b00",
|
|
.proxy_supply = (struct qcom_mss_reg_res[]) {
|
|
{
|
|
.supply = "mx",
|
|
.uV = 1050000,
|
|
},
|
|
{
|
|
.supply = "cx",
|
|
.uA = 100000,
|
|
},
|
|
{
|
|
.supply = "pll",
|
|
.uA = 100000,
|
|
},
|
|
{}
|
|
},
|
|
.active_supply = (struct qcom_mss_reg_res[]) {
|
|
{
|
|
.supply = "mss",
|
|
.uV = 1050000,
|
|
.uA = 100000,
|
|
},
|
|
{}
|
|
},
|
|
.proxy_clk_names = (char*[]){
|
|
"xo",
|
|
NULL
|
|
},
|
|
.active_clk_names = (char*[]){
|
|
"iface",
|
|
"bus",
|
|
"mem",
|
|
NULL
|
|
},
|
|
.need_mem_protection = false,
|
|
.has_alt_reset = false,
|
|
.version = MSS_MSM8974,
|
|
};
|
|
|
|
static const struct of_device_id q6v5_of_match[] = {
|
|
{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
|
|
{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
|
|
{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
|
|
{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
|
|
{ .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, q6v5_of_match);
|
|
|
|
static struct platform_driver q6v5_driver = {
|
|
.probe = q6v5_probe,
|
|
.remove = q6v5_remove,
|
|
.driver = {
|
|
.name = "qcom-q6v5-pil",
|
|
.of_match_table = q6v5_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(q6v5_driver);
|
|
|
|
MODULE_DESCRIPTION("Peripheral Image Loader for Hexagon");
|
|
MODULE_LICENSE("GPL v2");
|