mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
a28eeb43ee
Add the DT property to all boards that have the hardware workaround for erratum ERR006687 present. This allows the CPUidle driver to use the deep idle states, even if the FEC is active. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
631 lines
15 KiB
Plaintext
631 lines
15 KiB
Plaintext
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
memory {
|
|
reg = <0x10000000 0x80000000>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
|
|
|
user {
|
|
label = "debug";
|
|
gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
codec_osc: anaclk2 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24576000>;
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_audio: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "cs42888_supply";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_usb_h1_vbus: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "usb_h1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_otg_vbus: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "usb_otg_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
sound-cs42888 {
|
|
compatible = "fsl,imx6-sabreauto-cs42888",
|
|
"fsl,imx-audio-cs42888";
|
|
model = "imx-cs42888";
|
|
audio-cpu = <&esai>;
|
|
audio-asrc = <&asrc>;
|
|
audio-codec = <&codec>;
|
|
audio-routing =
|
|
"Line Out Jack", "AOUT1L",
|
|
"Line Out Jack", "AOUT1R",
|
|
"Line Out Jack", "AOUT2L",
|
|
"Line Out Jack", "AOUT2R",
|
|
"Line Out Jack", "AOUT3L",
|
|
"Line Out Jack", "AOUT3R",
|
|
"Line Out Jack", "AOUT4L",
|
|
"Line Out Jack", "AOUT4R",
|
|
"AIN1L", "Line In Jack",
|
|
"AIN1R", "Line In Jack",
|
|
"AIN2L", "Line In Jack",
|
|
"AIN2R", "Line In Jack";
|
|
};
|
|
|
|
sound-spdif {
|
|
compatible = "fsl,imx-audio-spdif",
|
|
"fsl,imx-sabreauto-spdif";
|
|
model = "imx-spdif";
|
|
spdif-controller = <&spdif>;
|
|
spdif-in;
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm3 0 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <7>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&clks {
|
|
assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
|
|
<&clks IMX6QDL_PLL4_BYPASS>,
|
|
<&clks IMX6QDL_CLK_LDB_DI0_SEL>,
|
|
<&clks IMX6QDL_CLK_LDB_DI1_SEL>,
|
|
<&clks IMX6QDL_CLK_PLL4_POST_DIV>;
|
|
assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
|
|
<&clks IMX6QDL_PLL4_BYPASS_SRC>,
|
|
<&clks IMX6QDL_CLK_PLL3_USB_OTG>,
|
|
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
|
|
assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
|
|
};
|
|
|
|
&ecspi1 {
|
|
fsl,spi-num-chipselects = <1>;
|
|
cs-gpios = <&gpio3 19 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
|
|
status = "disabled"; /* pin conflict with WEIM NOR */
|
|
|
|
flash: m25p80@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "st,m25p32", "jedec,spi-nor";
|
|
spi-max-frequency = <20000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&esai {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esai>;
|
|
assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
|
|
<&clks IMX6QDL_CLK_ESAI_EXTAL>;
|
|
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
|
|
assigned-clock-rates = <0>, <24576000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
phy-mode = "rgmii";
|
|
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
|
|
fsl,err006687-workaround-present;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
pmic: pfuze100@08 {
|
|
compatible = "fsl,pfuze100";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1ab {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw1c_reg: sw1c {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3a {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3b_reg: sw3b {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw4_reg: sw4 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vgen4_reg: vgen4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vgen5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vgen6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
codec: cs42888@48 {
|
|
compatible = "cirrus,cs42888";
|
|
reg = <0x48>;
|
|
clocks = <&codec_osc>;
|
|
clock-names = "mclk";
|
|
VA-supply = <®_audio>;
|
|
VD-supply = <®_audio>;
|
|
VLS-supply = <®_audio>;
|
|
VLC-supply = <®_audio>;
|
|
};
|
|
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
|
|
max7310_a: gpio@30 {
|
|
compatible = "maxim,max7310";
|
|
reg = <0x30>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
max7310_b: gpio@32 {
|
|
compatible = "maxim,max7310";
|
|
reg = <0x32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
max7310_c: gpio@34 {
|
|
compatible = "maxim,max7310";
|
|
reg = <0x34>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
imx6qdl-sabreauto {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
|
|
MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000
|
|
MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1_cs: ecspi1cs {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
|
|
MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
|
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_esai: esaigrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
|
|
MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030
|
|
MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
|
|
MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x1b030
|
|
MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030
|
|
MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030
|
|
MX6QDL_PAD_GPIO_17__ESAI_TX0 0x1b030
|
|
MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030
|
|
MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1b030
|
|
MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x1b030
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_leds: gpioledsgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpmi_nand: gpminandgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
|
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
|
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
|
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
|
|
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
|
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
|
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
|
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
|
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
|
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
|
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
|
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
|
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
|
MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
|
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm3: pwm1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_spdif: spdifgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart4: uart4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
|
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
|
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
|
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
|
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
|
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
|
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
|
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
|
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
|
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
|
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
|
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
|
|
>;
|
|
};
|
|
|
|
pinctrl_weim_cs0: weimcs0grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_weim_nor: weimnorgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
|
|
MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
|
|
MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
|
|
MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
|
|
MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
|
|
MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
|
|
MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
|
|
MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
|
|
MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
|
|
MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
|
|
MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
|
|
MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
|
|
MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
|
|
MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
|
|
MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
|
|
MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
|
|
MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
|
|
MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
|
|
MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
|
|
MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
|
|
MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
|
|
MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
|
|
MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
|
|
MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
|
|
MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
|
|
MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
|
|
MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
|
|
MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
|
|
MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
|
|
MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
|
|
MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
|
|
MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
|
|
MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
|
|
MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
|
|
MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
|
|
MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
|
|
MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
|
|
MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
|
|
MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
|
|
MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
|
|
MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
|
|
MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
|
|
MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ldb {
|
|
status = "okay";
|
|
|
|
lvds-channel@0 {
|
|
fsl,data-mapping = "spwg";
|
|
fsl,data-width = <18>;
|
|
status = "okay";
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: hsd100pxn1 {
|
|
clock-frequency = <65000000>;
|
|
hactive = <1024>;
|
|
vactive = <768>;
|
|
hback-porch = <220>;
|
|
hfront-porch = <40>;
|
|
vback-porch = <21>;
|
|
vfront-porch = <7>;
|
|
hsync-len = <60>;
|
|
vsync-len = <10>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spdif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spdif>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
vbus-supply = <®_usb_h1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
vbus-supply = <®_usb_otg_vbus>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&weim {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x08000000 0x08000000>;
|
|
status = "disabled"; /* pin conflict with SPI NOR */
|
|
|
|
nor@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0 0x02000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
bank-width = <2>;
|
|
fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
|
|
0x0000c000 0x1404a38e 0x00000000>;
|
|
};
|
|
};
|