linux_dsm_epyc7002/include/linux/mtd
Miquel Raynal 699274b1a1 Raw NAND core changes:
* Add support for manufacturer specific suspend/resume operation
 * Add support for manufacturer specific lock/unlock operation
 * Replace zero-length array with flexible-array member
 * Fix a typo ("manufecturer")
 * Ensure nand_soft_waitrdy wait period is enough
 
 Raw NAND controller driver changes:
 * Brcmnand:
 Add support for flash-edu for dma transfers (+ bindings)
 * Cadence:
 Reinit completion before executing a new command
 Change bad block marker size
 Fix the calculation of the avaialble OOB size
 Get meta data size from registers
 * Qualcom:
 Use dma_request_chan() instead dma_request_slave_channel()
 Release resources on failure within qcom_nandc_alloc()
 * Allwinner:
 Use dma_request_chan() instead dma_request_slave_channel()
 * Marvell:
 Use dma_request_chan() instead dma_request_slave_channel()
 Release DMA channel on error
 * Freescale:
 Use dma_request_chan() instead dma_request_slave_channel()
 * Macronix:
 Add support for Macronix NAND randomizer (+ bindings)
 * Ams-delta:
 Rename structures and functions to gpio_nand*
 Make the driver custom I/O ready
 Drop useless local variable
 Support custom driver initialisation
 Add module device tables
 Handle more GPIO pins as optional
 Make read pulses optional
 Don't hardcode read/write pulse widths
 Push inversion handling to gpiolib
 Enable OF partition info support
 Drop board specific partition info
 Use struct gpio_nand_platdata
 Write protect device during probe
 * Ingenic:
 Use devm_platform_ioremap_resource()
 Add dependency on MIPS || COMPILE_TEST
 * Denali:
 Deassert write protect pin
 * ST:
 Use dma_request_chan() instead dma_request_slave_channel()
 
 Raw NAND chip driver changes:
 * Toshiba:
 Support reading the number of bitflips for BENAND (Built-in ECC NAND)
 * Macronix:
 Add support for deep power down mode
 Add support for block protection
 
 SPI-NAND core changes:
 * Do not erase the block before writing a bad block marker
 * Explicitly use MTD_OPS_RAW to write the bad block marker to OOB
 * Stop using spinand->oobbuf for buffering bad block markers
 * Rework detect procedure for different READ_ID operation
 
 SPI-NAND driver changes:
 * Toshiba:
 Support for new Kioxia Serial NAND
 Rename function name to change suffix and prefix (8Gbit)
 Add comment about Kioxia ID
 * Micron:
 Add new Micron SPI NAND devices with multiple dies
 Add M70A series Micron SPI NAND devices
 identify SPI NAND device with Continuous Read mode
 Add new Micron SPI NAND devices
 Describe the SPI NAND device MT29F2G01ABAGD
 Generalize the OOB layout structure and function names
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl5+XuIACgkQJWrqGEe9
 VoRCAggAh0bpso9l8enk+ae1LrEGGLCV0sWMBy/pwM4zaBovqJqSdXRybg1IQE1N
 5AvZrcQUBzdr9RzusB0J/xVC31gStjNQJROekArHJI6rzjoHRM/779fx0JV1JJHI
 sWgX7UY7AVMH1l4BMB0mMezFeqJnZU5JRHQ+we3X4funNJ2JcBwvp1u4XJ2BDLRn
 oCDLYgMC9S4lWEP7/ARgv27w7GfaegCUqNOHBVH75d2c+l476z5TKUap8s/LjI8u
 8eRGerwLTj8/PLj1OqSEKXeJem2gZvZNpDCylgzrGZbU9r0M5I/EdXxJ90Pj6bR0
 +G/0JHb4C1DXeDXzw79KisggHDkUUA==
 =Zmzp
 -----END PGP SIGNATURE-----

Merge tag 'nand/for-5.7' into mtd/next

Raw NAND core changes:
* Add support for manufacturer specific suspend/resume operation
* Add support for manufacturer specific lock/unlock operation
* Replace zero-length array with flexible-array member
* Fix a typo ("manufecturer")
* Ensure nand_soft_waitrdy wait period is enough

Raw NAND controller driver changes:
* Brcmnand:
Add support for flash-edu for dma transfers (+ bindings)
* Cadence:
Reinit completion before executing a new command
Change bad block marker size
Fix the calculation of the avaialble OOB size
Get meta data size from registers
* Qualcom:
Use dma_request_chan() instead dma_request_slave_channel()
Release resources on failure within qcom_nandc_alloc()
* Allwinner:
Use dma_request_chan() instead dma_request_slave_channel()
* Marvell:
Use dma_request_chan() instead dma_request_slave_channel()
Release DMA channel on error
* Freescale:
Use dma_request_chan() instead dma_request_slave_channel()
* Macronix:
Add support for Macronix NAND randomizer (+ bindings)
* Ams-delta:
Rename structures and functions to gpio_nand*
Make the driver custom I/O ready
Drop useless local variable
Support custom driver initialisation
Add module device tables
Handle more GPIO pins as optional
Make read pulses optional
Don't hardcode read/write pulse widths
Push inversion handling to gpiolib
Enable OF partition info support
Drop board specific partition info
Use struct gpio_nand_platdata
Write protect device during probe
* Ingenic:
Use devm_platform_ioremap_resource()
Add dependency on MIPS || COMPILE_TEST
* Denali:
Deassert write protect pin
* ST:
Use dma_request_chan() instead dma_request_slave_channel()

Raw NAND chip driver changes:
* Toshiba:
Support reading the number of bitflips for BENAND (Built-in ECC NAND)
* Macronix:
Add support for deep power down mode
Add support for block protection

SPI-NAND core changes:
* Do not erase the block before writing a bad block marker
* Explicitly use MTD_OPS_RAW to write the bad block marker to OOB
* Stop using spinand->oobbuf for buffering bad block markers
* Rework detect procedure for different READ_ID operation

SPI-NAND driver changes:
* Toshiba:
Support for new Kioxia Serial NAND
Rename function name to change suffix and prefix (8Gbit)
Add comment about Kioxia ID
* Micron:
Add new Micron SPI NAND devices with multiple dies
Add M70A series Micron SPI NAND devices
identify SPI NAND device with Continuous Read mode
Add new Micron SPI NAND devices
Describe the SPI NAND device MT29F2G01ABAGD
Generalize the OOB layout structure and function names
2020-03-30 10:14:19 +02:00
..
bbm.h
blktrans.h
cfi_endian.h
cfi.h NAND core changes: 2019-07-06 22:51:56 +02:00
concat.h
doc2000.h
flashchip.h mtd: onenand: omap2: Fix errors in style 2020-01-09 20:08:15 +01:00
ftl.h
gen_probe.h
hyperbus.h mtd: Add support for HyperBus memory devices 2019-06-27 19:47:58 +02:00
inftl.h
jedec.h
latch-addr-flash.h
lpc32xx_mlc.h
lpc32xx_slc.h
map.h
mtd.h mtd: implement proper partition handling 2020-03-11 14:49:30 +01:00
mtdram.h
nand_bch.h
nand_ecc.h
nand-gpio.h
nand.h mtd: nand: fix typo, s/erasablocks/eraseblocks 2019-08-26 09:25:41 +02:00
ndfc.h
nftl.h
onenand_regs.h This pull-request contains the following changes for MTD: 2019-07-13 15:42:44 -07:00
onenand.h
onfi.h
partitions.h mtd: implement proper partition handling 2020-03-11 14:49:30 +01:00
pfow.h
physmap.h
pismo.h
plat-ram.h
platnand.h
qinfo.h
rawnand.h mtd: rawnand: Add support for manufacturer specific suspend/resume operation 2020-03-24 22:44:45 +01:00
sh_flctl.h
sharpsl.h mtd: rawnand: sharpsl: add include guard to linux/mtd/sharpsl.h 2019-08-26 09:25:41 +02:00
spear_smi.h
spi-nor.h mtd: spi-nor: Add SR 4bit block protection support 2020-03-24 11:47:42 +02:00
spinand.h mtd: spinand: micron: identify SPI NAND device with Continuous Read mode 2020-03-12 13:33:32 +01:00
super.h mtd: Kill mount_mtd() 2019-09-05 14:34:26 -04:00
ubi.h
xip.h