mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 20:16:05 +07:00
0b0e299720
Although we can detect the chip revision 100% at runtime, it is useful to specify it in the device tree compatible string too, because otherwise there would be no way to assess the correctness of device tree bindings statically, without booting a board (only some switch versions have internal RGMII delays and/or an SGMII port). But for testing the P/Q/R/S support, what I have is a reworked board with the SJA1105T replaced by a pin-compatible SJA1105Q, and I don't want to keep a separate device tree blob just for this one-off board. Since just the chip has been replaced, its RGMII delay setup is inherently the same (meaning: delays added by the PHY on the slave ports, and by PCB traces on the fixed-link CPU port). For this board, I'd rather have the driver shout at me, but go ahead and use what it found even if it doesn't match what it's been told is there. [ 2.970826] sja1105 spi0.1: Device tree specifies chip SJA1105T but found SJA1105Q, please fix it! [ 2.980010] sja1105 spi0.1: Probed switch chip: SJA1105Q [ 3.005082] sja1105 spi0.1: Enabled switch tagging Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
---|---|---|
.. | ||
b53 | ||
microchip | ||
mv88e6xxx | ||
ocelot | ||
qca | ||
sja1105 | ||
bcm_sf2_cfp.c | ||
bcm_sf2_regs.h | ||
bcm_sf2.c | ||
bcm_sf2.h | ||
dsa_loop_bdinfo.c | ||
dsa_loop.c | ||
dsa_loop.h | ||
Kconfig | ||
lan9303_i2c.c | ||
lan9303_mdio.c | ||
lan9303-core.c | ||
lan9303.h | ||
lantiq_gswip.c | ||
lantiq_pce.h | ||
Makefile | ||
mt7530.c | ||
mt7530.h | ||
mv88e6060.c | ||
mv88e6060.h | ||
qca8k.c | ||
qca8k.h | ||
realtek-smi-core.c | ||
realtek-smi-core.h | ||
rtl8366.c | ||
rtl8366rb.c | ||
vitesse-vsc73xx-core.c | ||
vitesse-vsc73xx-platform.c | ||
vitesse-vsc73xx-spi.c | ||
vitesse-vsc73xx.h |