AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2025-01-19 13:06:06 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
0b03e47d52
linux_dsm_epyc7002/arch/arm64/boot/dts/renesas
History
Arnd Bergmann d2849a5871 Renesas ARM64 Based SoC DT Updates for v5.1 
R-Car H3 (r8a7795) SoC
 - Sort i2c and pciec0 nodes within soc node
 R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
 - Remove BUSIF0 settings from rcar_sound,ssi
 
 R-Car M3-W (r8a7796) based Salvator-XS board
 - Convert to new LVDS DT bindings
 
 R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards
 - Use audio-graph-card to allow secondary sound device on kingfisher
   daugher board
 - Add HDMI sound support
 
 Kingfisher daughterboard for R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N
 (r8a77965) based ULCB boards
 - Add pcm3168 sound codec
 
 R-Car E3 (r8a77990) SoC
 - Enable DMA for SCIF2
 
 R-Car E3 (r8a77990) based Ebisu board
 - HS400 for onboard eMMC
 - Use simple-audio-card rather than simple-scu-audio-card
 - Correct EthernetAVB phy mode as rgmii
 - Add backlight and follow-up to correct duplicate regulator number
 
 R-Car V3M (r8a77970) based v3msk starter kit
 - Specify EtherAVB PHY IRQ now that GPIO support is present
 
 R-Car D3 (r8a77995) based draak board
 - Set better backlight levels
 
 RZ/G2M (r8a774a1) SoC
 - Correct hsusb reg size
 
 RZ/G2E (r8a774c0) SoC
 - Intial SoC DT
 - Add: and SYS-DMAC controller, SCIF, HSCIF, INTC-EX
   PFC, GPIO, Ethernet AVB, watchdog, secondary CA3 core, SDHI,
   I2C, IIC-DVFS, IPMU, CAN, thermal, MSIOF, audio, PWM, display output,
   USB2.0, USB-DMAC, HSUSB, USB3.0, IPMMU, PCIe, VIN and CSI-2 support
 - A follow-up patch included in this pull-request enables DMA for SCIF2
   so that DMA is enabled for all SCIF nodes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlxIKlEACgkQ189kaWo3
 T76URw/+LUjkNY2Erik3Q82UJUqgtVcVOaDz831K+5lN2vGNo+5mUdGlE1H97OeY
 +PG0w0Eg9xjLPB/wyRRBd6436FvdP2tnnJDhQTIuKKV9Ee76XGXJOKuuNH4LymqN
 XU6iMXDG4CqTPWSOpb6WzxCiWUvUVJAw6SvRETAKngRpVKIUb+4ieJdjVUFI/OuL
 AEyOBAd59qjHffVmV1MaRrwp1VT4oj2S1zoz/w/625WywxvtYvURkxAlXa93GOqI
 3VEGihdrUVMvbN6pjJ1QKe0sVIw1BXzBI2CKfo4AfW1PpnNKNxwIpV45JEiP8N7J
 UWTObgbjhejUMQBSh1bCk1hEESMp0iB2rkHYlqW8W7xkYpGP925MnRPKBNMNDTux
 khnKMznJLLU1rbbGUA2dvHtbR9pOHmdzMar3/N3VKSa69qilawkhWg/Kxjx3+CbM
 N5T7SHl0fwaMxY3TjQf759GzQ5DigJImHwuahI0ORu+Wceh1SdaWeq6kA+ZF9A0E
 l8ZOxJaZBDctcdpdShJGqBO2VXdXv8dSAhVJQ2Ln7I0gFNY8KffIW1LzrFx5c5Wk
 3JVQ57BCuMDUK59h/aKXfMApjgSahoGdsvNPCmyoseiw+2xkPPqM/sXnTXu0AYKS
 yoVtQ/oumNfBTg8Aaqj1tBezps1XLMNsG04h29iU1rrjka6GG+E=
 =HPzD
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM64 Based SoC DT Updates for v5.1

R-Car H3 (r8a7795) SoC
- Sort i2c and pciec0 nodes within soc node
R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
- Remove BUSIF0 settings from rcar_sound,ssi

R-Car M3-W (r8a7796) based Salvator-XS board
- Convert to new LVDS DT bindings

R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards
- Use audio-graph-card to allow secondary sound device on kingfisher
  daugher board
- Add HDMI sound support

Kingfisher daughterboard for R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N
(r8a77965) based ULCB boards
- Add pcm3168 sound codec

R-Car E3 (r8a77990) SoC
- Enable DMA for SCIF2

R-Car E3 (r8a77990) based Ebisu board
- HS400 for onboard eMMC
- Use simple-audio-card rather than simple-scu-audio-card
- Correct EthernetAVB phy mode as rgmii
- Add backlight and follow-up to correct duplicate regulator number

R-Car V3M (r8a77970) based v3msk starter kit
- Specify EtherAVB PHY IRQ now that GPIO support is present

R-Car D3 (r8a77995) based draak board
- Set better backlight levels

RZ/G2M (r8a774a1) SoC
- Correct hsusb reg size

RZ/G2E (r8a774c0) SoC
- Intial SoC DT
- Add: and SYS-DMAC controller, SCIF, HSCIF, INTC-EX
  PFC, GPIO, Ethernet AVB, watchdog, secondary CA3 core, SDHI,
  I2C, IIC-DVFS, IPMU, CAN, thermal, MSIOF, audio, PWM, display output,
  USB2.0, USB-DMAC, HSUSB, USB3.0, IPMMU, PCIe, VIN and CSI-2 support
- A follow-up patch included in this pull-request enables DMA for SCIF2
  so that DMA is enabled for all SCIF nodes

* tag 'renesas-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (44 commits)
  arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3
  arm64: dts: renesas: r8a77990: Enable DMA for SCIF2
  arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2
  arm64: dts: renesas: r8a77990: ebisu: Fix backlight regulator numbering
  arm64: dts: renesas: v3msk: specify EtherAVB PHY IRQ
  arm64: dts: renesas: r8a77990-ebisu: use simple-audio-card
  arm64: dts: renesas: r8a7796: remove BUSIF0 settings from rcar_sound,ssi
  arm64: dts: renesas: r8a7795: remove BUSIF0 settings from rcar_sound,ssi
  arm64: dts: renesas: ulcb-kf: add pcm3168 sound codec
  arm64: dts: renesas: ulcb: add HDMI sound support
  arm64: dts: renesas: ulcb: use audio-graph-card
  arm64: dts: renesas: r8a7796: salvator-xs: Convert to new LVDS DT bindings
  arm64: dts: renesas: r8a77990: Sort i2c nodes within soc node
  arm64: dts: renesas: r8a77990: sort pciec0 node within soc node
  arm64: dts: renesas: r8a774a1: Fix hsusb reg size
  arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes
  arm64: dts: renesas: r8a774c0: Add PCIe device node
  arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMU
  arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMU
  arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30 17:55:11 +01:00
..
Makefile arm64: dts: renesas: r8a77965: m3nulcb-kf: Initial device tree 2018-09-13 09:47:46 +02:00
r8a774a1.dtsi Renesas ARM64 Based SoC DT Updates for v5.1 2019-01-30 17:55:11 +01:00
r8a774c0.dtsi arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2 2019-01-23 09:45:40 +01:00
r8a7795-es1-h3ulcb-kf.dts arm64: dts: renesas: convert to SPDX identifiers 2018-06-25 15:30:32 +02:00
r8a7795-es1-h3ulcb.dts arm64: dts: renesas: convert to SPDX identifiers 2018-06-25 15:30:32 +02:00
r8a7795-es1-salvator-x.dts arm64: dts: renesas: r8a7795: remove unneeded sound #address/size-cells 2018-11-05 12:47:17 +01:00
r8a7795-es1.dtsi arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes 2018-11-30 11:16:55 +01:00
r8a7795-h3ulcb-kf.dts arm64: dts: renesas: convert to SPDX identifiers 2018-06-25 15:30:32 +02:00
r8a7795-h3ulcb.dts arm64: dts: renesas: Convert to new LVDS DT bindings 2018-08-27 15:06:16 +02:00
r8a7795-salvator-x.dts arm64: dts: renesas: r8a7795: remove unneeded sound #address/size-cells 2018-11-05 12:47:17 +01:00
r8a7795-salvator-xs.dts arm64: dts: renesas: r8a7795: remove unneeded sound #address/size-cells 2018-11-05 12:47:17 +01:00
r8a7795.dtsi Renesas ARM64 Based SoC DT Updates for v5.1 2019-01-30 17:55:11 +01:00
r8a7796-m3ulcb-kf.dts arm64: dts: renesas: convert to SPDX identifiers 2018-06-25 15:30:32 +02:00
r8a7796-m3ulcb.dts arm64: dts: renesas: Convert to new LVDS DT bindings 2018-08-27 15:06:16 +02:00
r8a7796-salvator-x.dts arm64: dts: renesas: Convert to new LVDS DT bindings 2018-08-27 15:06:16 +02:00
r8a7796-salvator-xs.dts arm64: dts: renesas: r8a7796: salvator-xs: Convert to new LVDS DT bindings 2019-01-23 09:45:34 +01:00
r8a7796.dtsi Renesas ARM64 Based SoC DT Updates for v5.1 2019-01-30 17:55:11 +01:00
r8a77965-m3nulcb-kf.dts arm64: dts: renesas: r8a77965: m3nulcb-kf: Initial device tree 2018-09-13 09:47:46 +02:00
r8a77965-m3nulcb.dts arm64: dts: renesas: r8a77965: m3nulcb: Initial device tree 2018-09-13 09:47:16 +02:00
r8a77965-salvator-x.dts arm64: dts: renesas: r8a77965-salvator-x: Enable DU external clocks and HDMI 2018-05-16 10:45:06 +02:00
r8a77965-salvator-xs.dts arm64: dts: renesas: salvator-xs: Improve SATA switch settings comments 2018-09-13 09:47:53 +02:00
r8a77965.dtsi arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string 2019-01-30 17:34:36 +01:00
r8a77970-eagle.dts arm64: dts: renesas: convert to SPDX identifiers 2018-06-25 15:30:32 +02:00
r8a77970-v3msk.dts arm64: dts: renesas: v3msk: specify EtherAVB PHY IRQ 2019-01-23 09:45:39 +01:00
r8a77970.dtsi arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string 2019-01-30 17:34:36 +01:00
r8a77980-condor.dts arm64: dts: renesas: condor: switch from EtherAVB to GEther 2018-11-05 15:08:44 +01:00
r8a77980-v3hsk.dts arm64: dts: renesas: v3hsk: Move lvds0 node 2018-09-13 09:47:48 +02:00
r8a77980.dtsi arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string 2019-01-30 17:34:36 +01:00
r8a77990-ebisu.dts arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3 2019-01-23 09:45:41 +01:00
r8a77990.dtsi Renesas ARM64 Based SoC DT Updates for v5.1 2019-01-30 17:55:11 +01:00
r8a77995-draak.dts arm64: dts: renesas: r8a77995: draak: Set better backlight levels 2019-01-07 13:22:47 +01:00
r8a77995.dtsi arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string 2019-01-30 17:34:36 +01:00
salvator-common.dtsi arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB 2018-11-06 13:13:26 +01:00
salvator-x.dtsi arm64: dts: renesas: convert to SPDX identifiers 2018-06-25 15:30:32 +02:00
salvator-xs.dtsi arm64: dts: renesas: convert to SPDX identifiers 2018-06-25 15:30:32 +02:00
ulcb-kf.dtsi arm64: dts: renesas: ulcb-kf: add pcm3168 sound codec 2019-01-23 09:45:36 +01:00
ulcb.dtsi arm64: dts: renesas: ulcb: add HDMI sound support 2019-01-23 09:45:35 +01:00