linux_dsm_epyc7002/arch/arm64/Kconfig.platforms
Linus Torvalds 828f3e18e1 ARM/SoC: drivers for v5.7
These are updates to SoC specific drivers that did not have
 another subsystem maintainer tree to go through for some
 reason:
 
 - Some bus and memory drivers for the MIPS P5600 based
   Baikal-T1 SoC that is getting added through the MIPS tree.
 
 - There are new soc_device identification drivers for TI K3,
   Qualcomm MSM8939
 
 - New reset controller drivers for NXP i.MX8MP, Renesas
   RZ/G1H, and Hisilicon hi6220
 
 - The SCMI firmware interface can now work across ARM SMC/HVC
   as a transport.
 
 - Mediatek platforms now use a new driver for their "MMSYS"
   hardware block that controls clocks and some other aspects
   in behalf of the media and gpu drivers.
 
 - Some Tegra processors have improved power management
   support, including getting woken up by the PMIC and cluster
   power down during idle.
 
 - A new v4l staging driver for Tegra is added.
 
 - Cleanups and minor bugfixes for TI, NXP, Hisilicon,
   Mediatek, and Tegra.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvgAACgkQmmx57+YA
 GNmj/hAAnAJ/hYehLfgCe711HUntgeRkaoTVpCt8BJNMdxsa23sn3V6k5+WYn1uG
 PtlgpefZEMHLUEEVDegR4nZXLG0Pzu1SR12KW34YPcQKkNo/+vlQ9zYUajnJ/KX6
 10zdLSIzHfk1VtXKvvQQ8xFyE+S/trGmjC57E6gfoCUT3rl1maD+ccVXUBaz9oob
 wuMxGXQAl57mio5yT1OfSk6Fev39xRE2dN1hzP7KUYhsemZajBwBBW5wVJZCsCB8
 LCGmxVkavM7BV4r2NokbBDs5rlfedBl/P/IPd9Is5a5tuGUkSsVRG9zqShxYLGM3
 S06az6POQFwXKFJoUKW0dK/Koy0D7BK+vhUBPzFv4HZ8iDCVf6Jju2MJ02GMqHPj
 OOrXaCbLYrvN/edVUWeeFywqwMbYTRwC4DxyTq5m7HxEB004xTOhs0rX5aR0u4n1
 bbsR97LguolwH9iEMzd3F3jCiKBcMecH3lAh5WcrtwlFIRrNhbWoGDoA/4TuORFS
 b11rgsTRIJ5Vc++D1HnSnx0ZZvUzyluMvygdALnSgVah6xYe6KVw9Kg/wioAJ04G
 uSTidqP3qRhsyET2HQo7CxdVfZbKfP25iKCKrdhQziztKvhF8qrUmZKloXOodRw+
 ewYSRmv8c324OYYit1X43oAdW8dntq1XbSIauaqxEb4JC7x/xRY=
 =44Jc
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM/SoC driver updates from Arnd Bergmann:
 "These are updates to SoC specific drivers that did not have another
  subsystem maintainer tree to go through for some reason:

   - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
     that is getting added through the MIPS tree.

   - There are new soc_device identification drivers for TI K3, Qualcomm
     MSM8939

   - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
     Hisilicon hi6220

   - The SCMI firmware interface can now work across ARM SMC/HVC as a
     transport.

   - Mediatek platforms now use a new driver for their "MMSYS" hardware
     block that controls clocks and some other aspects in behalf of the
     media and gpu drivers.

   - Some Tegra processors have improved power management support,
     including getting woken up by the PMIC and cluster power down
     during idle.

   - A new v4l staging driver for Tegra is added.

   - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
     Tegra"

* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
  clk: sprd: fix compile-testing
  bus: bt1-axi: Build the driver into the kernel
  bus: bt1-apb: Build the driver into the kernel
  bus: bt1-axi: Use sysfs_streq instead of strncmp
  bus: bt1-axi: Optimize the return points in the driver
  bus: bt1-apb: Use sysfs_streq instead of strncmp
  bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
  bus: bt1-apb: Fix show/store callback identations
  bus: bt1-apb: Include linux/io.h
  dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
  memory: Add Baikal-T1 L2-cache Control Block driver
  bus: Add Baikal-T1 APB-bus driver
  bus: Add Baikal-T1 AXI-bus driver
  dt-bindings: bus: Add Baikal-T1 APB-bus binding
  dt-bindings: bus: Add Baikal-T1 AXI-bus binding
  staging: tegra-video: fix V4L2 dependency
  tee: fix crypto select
  drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
  soc: ti: add k3 platforms chipid module driver
  dt-bindings: soc: ti: add binding for k3 platforms chipid module
  ...
2020-06-04 19:56:20 -07:00

304 lines
6.9 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0-only
menu "Platform selection"
config ARCH_ACTIONS
bool "Actions Semi Platforms"
select OWL_TIMER
select PINCTRL
help
This enables support for the Actions Semiconductor S900 SoC family.
config ARCH_AGILEX
bool "Intel's Agilex SoCFPGA Family"
help
This enables support for Intel's Agilex SoCFPGA Family.
config ARCH_SUNXI
bool "Allwinner sunxi 64-bit SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select GENERIC_IRQ_CHIP
select PINCTRL
select RESET_CONTROLLER
help
This enables support for Allwinner sunxi based SoCs like the A64.
config ARCH_ALPINE
bool "Annapurna Labs Alpine platform"
select ALPINE_MSI if PCI
help
This enables support for the Annapurna Labs Alpine
Soc family.
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
select TIMER_OF
select GPIOLIB
select MFD_CORE
select PINCTRL
select PINCTRL_BCM2835
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
help
This enables support for the Broadcom BCM2837 and BCM2711 SoC.
These SoCs are used in the Raspberry Pi 3 and 4 devices.
config ARCH_BCM_IPROC
bool "Broadcom iProc SoC Family"
select COMMON_CLK_IPROC
select GPIOLIB
select PINCTRL
help
This enables support for Broadcom iProc based SoCs
config ARCH_BERLIN
bool "Marvell Berlin SoC Family"
select DW_APB_ICTL
select GPIOLIB
select PINCTRL
help
This enables support for Marvell Berlin SoC Family
config ARCH_BITMAIN
bool "Bitmain SoC Platforms"
help
This enables support for the Bitmain SoC Family.
config ARCH_BRCMSTB
bool "Broadcom Set-Top-Box SoCs"
select ARCH_HAS_RESET_CONTROLLER
select BCM7038_L1_IRQ
select BRCMSTB_L2_IRQ
select GENERIC_IRQ_CHIP
select PINCTRL
help
This enables support for Broadcom's ARMv8 Set Top Box SoCs
config ARCH_EXYNOS
bool "ARMv8 based Samsung Exynos SoC family"
select COMMON_CLK_SAMSUNG
select EXYNOS_CHIPID
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select EXYNOS_PMU
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select SOC_SAMSUNG
help
This enables support for ARMv8 based Samsung Exynos SoC family.
config ARCH_K3
bool "Texas Instruments Inc. K3 multicore SoC architecture"
select PM_GENERIC_DOMAINS if PM
select MAILBOX
select SOC_TI
select TI_MESSAGE_MANAGER
select TI_SCI_PROTOCOL
select TI_SCI_INTR_IRQCHIP
select TI_SCI_INTA_IRQCHIP
help
This enables support for Texas Instruments' K3 multicore SoC
architecture.
config ARCH_LAYERSCAPE
bool "ARMv8 based Freescale Layerscape SoC family"
select EDAC_SUPPORT
help
This enables support for the Freescale Layerscape SoC family.
config ARCH_LG1K
bool "LG Electronics LG1K SoC Family"
help
This enables support for LG Electronics LG1K SoC Family
config ARCH_HISI
bool "Hisilicon SoC Family"
select ARM_TIMER_SP804
select HISILICON_IRQ_MBIGEN if PCI
select PINCTRL
help
This enables support for Hisilicon ARMv8 SoC family
config ARCH_MEDIATEK
bool "MediaTek SoC Family"
select ARM_GIC
select PINCTRL
select MTK_TIMER
help
This enables support for MediaTek MT27xx, MT65xx, MT76xx
& MT81xx ARMv8 SoCs
config ARCH_MESON
bool "Amlogic Platforms"
select PINCTRL
select PINCTRL_MESON
select COMMON_CLK_GXBB
select COMMON_CLK_AXG
select COMMON_CLK_G12A
select MESON_IRQ_GPIO
help
This enables support for the arm64 based Amlogic SoCs
such as the s905, S905X/D, S912, A113X/D or S905X/D2
config ARCH_MVEBU
bool "Marvell EBU SoC Family"
select ARMADA_AP806_SYSCON
select ARMADA_CP110_SYSCON
select ARMADA_37XX_CLK
select GPIOLIB
select GPIOLIB_IRQCHIP
select MVEBU_GICP
select MVEBU_ICU
select MVEBU_ODMI
select MVEBU_PIC
select MVEBU_SEI
select OF_GPIO
select PINCTRL
select PINCTRL_ARMADA_37XX
select PINCTRL_ARMADA_AP806
select PINCTRL_ARMADA_CP110
help
This enables support for Marvell EBU familly, including:
- Armada 3700 SoC Family
- Armada 7K SoC Family
- Armada 8K SoC Family
config ARCH_MXC
bool "ARMv8 based NXP i.MX SoC family"
select ARM64_ERRATUM_843419
select ARM64_ERRATUM_845719 if COMPAT
select IMX_GPCV2
select IMX_GPCV2_PM_DOMAINS
select PM
select PM_GENERIC_DOMAINS
select SOC_BUS
select TIMER_IMX_SYS_CTR
help
This enables support for the ARMv8 based SoCs in the
NXP i.MX family.
config ARCH_QCOM
bool "Qualcomm Platforms"
select GPIOLIB
select PINCTRL
help
This enables support for the ARMv8 based Qualcomm chipsets.
config ARCH_REALTEK
bool "Realtek Platforms"
select RESET_CONTROLLER
help
This enables support for the ARMv8 based Realtek chipsets,
like the RTD1295.
config ARCH_RENESAS
bool "Renesas SoC Platforms"
select GPIOLIB
select PINCTRL
select SOC_BUS
help
This enables support for the ARMv8 based Renesas SoCs.
config ARCH_ROCKCHIP
bool "Rockchip Platforms"
select ARCH_HAS_RESET_CONTROLLER
select GPIOLIB
select PINCTRL
select PINCTRL_ROCKCHIP
select PM
select ROCKCHIP_TIMER
help
This enables support for the ARMv8 based Rockchip chipsets,
like the RK3368.
config ARCH_S32
bool "NXP S32 SoC Family"
help
This enables support for the NXP S32 family of processors.
config ARCH_SEATTLE
bool "AMD Seattle SoC Family"
help
This enables support for AMD Seattle SOC Family
config ARCH_STRATIX10
bool "Altera's Stratix 10 SoCFPGA Family"
help
This enables support for Altera's Stratix 10 SoCFPGA Family.
config ARCH_SYNQUACER
bool "Socionext SynQuacer SoC Family"
config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select ARM_GIC_PM
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select TIMER_OF
select GENERIC_CLOCKEVENTS
select GPIOLIB
select PINCTRL
select PM
select PM_GENERIC_DOMAINS
select RESET_CONTROLLER
help
This enables support for the NVIDIA Tegra SoC family.
config ARCH_SPRD
bool "Spreadtrum SoC platform"
help
Support for Spreadtrum ARM based SoCs
config ARCH_THUNDER
bool "Cavium Inc. Thunder SoC Family"
help
This enables support for Cavium's Thunder Family of SoCs.
config ARCH_THUNDER2
bool "Cavium ThunderX2 Server Processors"
select GPIOLIB
help
This enables support for Cavium's ThunderX2 CN99XX family of
server processors.
config ARCH_UNIPHIER
bool "Socionext UniPhier SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select PINCTRL
select RESET_CONTROLLER
help
This enables support for Socionext UniPhier SoC family.
config ARCH_VEXPRESS
bool "ARMv8 software model (Versatile Express)"
select GPIOLIB
select PM
select PM_GENERIC_DOMAINS
help
This enables support for the ARMv8 software model (Versatile
Express).
config ARCH_VULCAN
def_bool n
config ARCH_XGENE
bool "AppliedMicro X-Gene SOC Family"
help
This enables support for AppliedMicro X-Gene SOC Family
config ARCH_ZX
bool "ZTE ZX SoC Family"
select PINCTRL
help
This enables support for ZTE ZX SoC Family
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
help
This enables support for Xilinx ZynqMP Family
endmenu