mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 19:54:40 +07:00
be01da72b1
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
321 lines
7.0 KiB
C
321 lines
7.0 KiB
C
/*
|
|
* drivers/net/phy/lxt.c
|
|
*
|
|
* Driver for Intel LXT PHYs
|
|
*
|
|
* Author: Andy Fleming
|
|
*
|
|
* Copyright (c) 2004 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/phy.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
/* The Level one LXT970 is used by many boards */
|
|
|
|
#define MII_LXT970_IER 17 /* Interrupt Enable Register */
|
|
|
|
#define MII_LXT970_IER_IEN 0x0002
|
|
|
|
#define MII_LXT970_ISR 18 /* Interrupt Status Register */
|
|
|
|
#define MII_LXT970_CONFIG 19 /* Configuration Register */
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/* The Level one LXT971 is used on some of my custom boards */
|
|
|
|
/* register definitions for the 971 */
|
|
#define MII_LXT971_IER 18 /* Interrupt Enable Register */
|
|
#define MII_LXT971_IER_IEN 0x00f2
|
|
|
|
#define MII_LXT971_ISR 19 /* Interrupt Status Register */
|
|
|
|
/* register definitions for the 973 */
|
|
#define MII_LXT973_PCR 16 /* Port Configuration Register */
|
|
#define PCR_FIBER_SELECT 1
|
|
|
|
MODULE_DESCRIPTION("Intel LXT PHY driver");
|
|
MODULE_AUTHOR("Andy Fleming");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int lxt970_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, MII_BMSR);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = phy_read(phydev, MII_LXT970_ISR);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lxt970_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN);
|
|
else
|
|
err = phy_write(phydev, MII_LXT970_IER, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int lxt970_config_init(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_write(phydev, MII_LXT970_CONFIG, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
|
|
static int lxt971_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err = phy_read(phydev, MII_LXT971_ISR);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lxt971_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN);
|
|
else
|
|
err = phy_write(phydev, MII_LXT971_IER, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* A2 version of LXT973 chip has an ERRATA: it randomly return the contents
|
|
* of the previous even register when you read a odd register regularly
|
|
*/
|
|
|
|
static int lxt973a2_update_link(struct phy_device *phydev)
|
|
{
|
|
int status;
|
|
int control;
|
|
int retry = 8; /* we try 8 times */
|
|
|
|
/* Do a fake read */
|
|
status = phy_read(phydev, MII_BMSR);
|
|
|
|
if (status < 0)
|
|
return status;
|
|
|
|
control = phy_read(phydev, MII_BMCR);
|
|
if (control < 0)
|
|
return control;
|
|
|
|
do {
|
|
/* Read link and autonegotiation status */
|
|
status = phy_read(phydev, MII_BMSR);
|
|
} while (status >= 0 && retry-- && status == control);
|
|
|
|
if (status < 0)
|
|
return status;
|
|
|
|
if ((status & BMSR_LSTATUS) == 0)
|
|
phydev->link = 0;
|
|
else
|
|
phydev->link = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lxt973a2_read_status(struct phy_device *phydev)
|
|
{
|
|
int adv;
|
|
int err;
|
|
int lpa;
|
|
int lpagb = 0;
|
|
|
|
/* Update the link, but return if there was an error */
|
|
err = lxt973a2_update_link(phydev);
|
|
if (err)
|
|
return err;
|
|
|
|
if (AUTONEG_ENABLE == phydev->autoneg) {
|
|
int retry = 1;
|
|
|
|
adv = phy_read(phydev, MII_ADVERTISE);
|
|
|
|
if (adv < 0)
|
|
return adv;
|
|
|
|
do {
|
|
lpa = phy_read(phydev, MII_LPA);
|
|
|
|
if (lpa < 0)
|
|
return lpa;
|
|
|
|
/* If both registers are equal, it is suspect but not
|
|
* impossible, hence a new try
|
|
*/
|
|
} while (lpa == adv && retry--);
|
|
|
|
lpa &= adv;
|
|
|
|
phydev->speed = SPEED_10;
|
|
phydev->duplex = DUPLEX_HALF;
|
|
phydev->pause = phydev->asym_pause = 0;
|
|
|
|
if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
|
|
phydev->speed = SPEED_1000;
|
|
|
|
if (lpagb & LPA_1000FULL)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
} else if (lpa & (LPA_100FULL | LPA_100HALF)) {
|
|
phydev->speed = SPEED_100;
|
|
|
|
if (lpa & LPA_100FULL)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
} else {
|
|
if (lpa & LPA_10FULL)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
}
|
|
|
|
if (phydev->duplex == DUPLEX_FULL) {
|
|
phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
|
|
phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
|
|
}
|
|
} else {
|
|
int bmcr = phy_read(phydev, MII_BMCR);
|
|
|
|
if (bmcr < 0)
|
|
return bmcr;
|
|
|
|
if (bmcr & BMCR_FULLDPLX)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
else
|
|
phydev->duplex = DUPLEX_HALF;
|
|
|
|
if (bmcr & BMCR_SPEED1000)
|
|
phydev->speed = SPEED_1000;
|
|
else if (bmcr & BMCR_SPEED100)
|
|
phydev->speed = SPEED_100;
|
|
else
|
|
phydev->speed = SPEED_10;
|
|
|
|
phydev->pause = phydev->asym_pause = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lxt973_probe(struct phy_device *phydev)
|
|
{
|
|
int val = phy_read(phydev, MII_LXT973_PCR);
|
|
|
|
if (val & PCR_FIBER_SELECT) {
|
|
/*
|
|
* If fiber is selected, then the only correct setting
|
|
* is 100Mbps, full duplex, and auto negotiation off.
|
|
*/
|
|
val = phy_read(phydev, MII_BMCR);
|
|
val |= (BMCR_SPEED100 | BMCR_FULLDPLX);
|
|
val &= ~BMCR_ANENABLE;
|
|
phy_write(phydev, MII_BMCR, val);
|
|
/* Remember that the port is in fiber mode. */
|
|
phydev->priv = lxt973_probe;
|
|
} else {
|
|
phydev->priv = NULL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int lxt973_config_aneg(struct phy_device *phydev)
|
|
{
|
|
/* Do nothing if port is in fiber mode. */
|
|
return phydev->priv ? 0 : genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static struct phy_driver lxt97x_driver[] = {
|
|
{
|
|
.phy_id = 0x78100000,
|
|
.name = "LXT970",
|
|
.phy_id_mask = 0xfffffff0,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_init = lxt970_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = lxt970_ack_interrupt,
|
|
.config_intr = lxt970_config_intr,
|
|
}, {
|
|
.phy_id = 0x001378e0,
|
|
.name = "LXT971",
|
|
.phy_id_mask = 0xfffffff0,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = lxt971_ack_interrupt,
|
|
.config_intr = lxt971_config_intr,
|
|
}, {
|
|
.phy_id = 0x00137a10,
|
|
.name = "LXT973-A2",
|
|
.phy_id_mask = 0xffffffff,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = 0,
|
|
.probe = lxt973_probe,
|
|
.config_aneg = lxt973_config_aneg,
|
|
.read_status = lxt973a2_read_status,
|
|
}, {
|
|
.phy_id = 0x00137a10,
|
|
.name = "LXT973",
|
|
.phy_id_mask = 0xfffffff0,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = 0,
|
|
.probe = lxt973_probe,
|
|
.config_aneg = lxt973_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
} };
|
|
|
|
module_phy_driver(lxt97x_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused lxt_tbl[] = {
|
|
{ 0x78100000, 0xfffffff0 },
|
|
{ 0x001378e0, 0xfffffff0 },
|
|
{ 0x00137a10, 0xfffffff0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, lxt_tbl);
|