mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-08 01:46:40 +07:00
4647ca5761
Found few more with randconfig generated .configs: In file included from arch/arm/mach-omap2/prm-regbits-34xx.h:17, from arch/arm/mach-omap2/vc.c:18: arch/arm/mach-omap2/prm2xxx_3xxx.h: In function ‘omap2_prm_read_mod_reg’: arch/arm/mach-omap2/prm2xxx_3xxx.h:239: error: implicit declaration of function ‘WARN’ In file included from arch/arm/mach-omap2/powerdomain44xx.c:22: arch/arm/mach-omap2/prm2xxx_3xxx.h: In function ‘omap2_prm_read_mod_reg’: arch/arm/mach-omap2/prm2xxx_3xxx.h:239: error: implicit declaration of function ‘WARN’ This is because omap2_prm functions are currently just stubs for omap4 only builds. Signed-off-by: Tony Lindgren <tony@atomide.com>
367 lines
10 KiB
C
367 lines
10 KiB
C
/*
|
|
* OMAP Voltage Controller (VC) interface
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments, Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bug.h>
|
|
|
|
#include <plat/cpu.h>
|
|
|
|
#include "voltage.h"
|
|
#include "vc.h"
|
|
#include "prm-regbits-34xx.h"
|
|
#include "prm-regbits-44xx.h"
|
|
#include "prm44xx.h"
|
|
|
|
/**
|
|
* struct omap_vc_channel_cfg - describe the cfg_channel bitfield
|
|
* @sa: bit for slave address
|
|
* @rav: bit for voltage configuration register
|
|
* @rac: bit for command configuration register
|
|
* @racen: enable bit for RAC
|
|
* @cmd: bit for command value set selection
|
|
*
|
|
* Channel configuration bits, common for OMAP3+
|
|
* OMAP3 register: PRM_VC_CH_CONF
|
|
* OMAP4 register: PRM_VC_CFG_CHANNEL
|
|
* OMAP5 register: PRM_VC_SMPS_<voltdm>_CONFIG
|
|
*/
|
|
struct omap_vc_channel_cfg {
|
|
u8 sa;
|
|
u8 rav;
|
|
u8 rac;
|
|
u8 racen;
|
|
u8 cmd;
|
|
};
|
|
|
|
static struct omap_vc_channel_cfg vc_default_channel_cfg = {
|
|
.sa = BIT(0),
|
|
.rav = BIT(1),
|
|
.rac = BIT(2),
|
|
.racen = BIT(3),
|
|
.cmd = BIT(4),
|
|
};
|
|
|
|
/*
|
|
* On OMAP3+, all VC channels have the above default bitfield
|
|
* configuration, except the OMAP4 MPU channel. This appears
|
|
* to be a freak accident as every other VC channel has the
|
|
* default configuration, thus creating a mutant channel config.
|
|
*/
|
|
static struct omap_vc_channel_cfg vc_mutant_channel_cfg = {
|
|
.sa = BIT(0),
|
|
.rav = BIT(2),
|
|
.rac = BIT(3),
|
|
.racen = BIT(4),
|
|
.cmd = BIT(1),
|
|
};
|
|
|
|
static struct omap_vc_channel_cfg *vc_cfg_bits;
|
|
#define CFG_CHANNEL_MASK 0x1f
|
|
|
|
/**
|
|
* omap_vc_config_channel - configure VC channel to PMIC mappings
|
|
* @voltdm: pointer to voltagdomain defining the desired VC channel
|
|
*
|
|
* Configures the VC channel to PMIC mappings for the following
|
|
* PMIC settings
|
|
* - i2c slave address (SA)
|
|
* - voltage configuration address (RAV)
|
|
* - command configuration address (RAC) and enable bit (RACEN)
|
|
* - command values for ON, ONLP, RET and OFF (CMD)
|
|
*
|
|
* This function currently only allows flexible configuration of the
|
|
* non-default channel. Starting with OMAP4, there are more than 2
|
|
* channels, with one defined as the default (on OMAP4, it's MPU.)
|
|
* Only the non-default channel can be configured.
|
|
*/
|
|
static int omap_vc_config_channel(struct voltagedomain *voltdm)
|
|
{
|
|
struct omap_vc_channel *vc = voltdm->vc;
|
|
|
|
/*
|
|
* For default channel, the only configurable bit is RACEN.
|
|
* All others must stay at zero (see function comment above.)
|
|
*/
|
|
if (vc->flags & OMAP_VC_CHANNEL_DEFAULT)
|
|
vc->cfg_channel &= vc_cfg_bits->racen;
|
|
|
|
voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift,
|
|
vc->cfg_channel << vc->cfg_channel_sa_shift,
|
|
vc->cfg_channel_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Voltage scale and accessory APIs */
|
|
int omap_vc_pre_scale(struct voltagedomain *voltdm,
|
|
unsigned long target_volt,
|
|
u8 *target_vsel, u8 *current_vsel)
|
|
{
|
|
struct omap_vc_channel *vc = voltdm->vc;
|
|
u32 vc_cmdval;
|
|
|
|
/* Check if sufficient pmic info is available for this vdd */
|
|
if (!voltdm->pmic) {
|
|
pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
|
|
__func__, voltdm->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!voltdm->pmic->uv_to_vsel) {
|
|
pr_err("%s: PMIC function to convert voltage in uV to"
|
|
"vsel not registered. Hence unable to scale voltage"
|
|
"for vdd_%s\n", __func__, voltdm->name);
|
|
return -ENODATA;
|
|
}
|
|
|
|
if (!voltdm->read || !voltdm->write) {
|
|
pr_err("%s: No read/write API for accessing vdd_%s regs\n",
|
|
__func__, voltdm->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
*target_vsel = voltdm->pmic->uv_to_vsel(target_volt);
|
|
*current_vsel = voltdm->pmic->uv_to_vsel(voltdm->nominal_volt);
|
|
|
|
/* Setting the ON voltage to the new target voltage */
|
|
vc_cmdval = voltdm->read(vc->cmdval_reg);
|
|
vc_cmdval &= ~vc->common->cmd_on_mask;
|
|
vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift);
|
|
voltdm->write(vc_cmdval, vc->cmdval_reg);
|
|
|
|
omap_vp_update_errorgain(voltdm, target_volt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void omap_vc_post_scale(struct voltagedomain *voltdm,
|
|
unsigned long target_volt,
|
|
u8 target_vsel, u8 current_vsel)
|
|
{
|
|
u32 smps_steps = 0, smps_delay = 0;
|
|
|
|
smps_steps = abs(target_vsel - current_vsel);
|
|
/* SMPS slew rate / step size. 2us added as buffer. */
|
|
smps_delay = ((smps_steps * voltdm->pmic->step_size) /
|
|
voltdm->pmic->slew_rate) + 2;
|
|
udelay(smps_delay);
|
|
}
|
|
|
|
/* vc_bypass_scale - VC bypass method of voltage scaling */
|
|
int omap_vc_bypass_scale(struct voltagedomain *voltdm,
|
|
unsigned long target_volt)
|
|
{
|
|
struct omap_vc_channel *vc = voltdm->vc;
|
|
u32 loop_cnt = 0, retries_cnt = 0;
|
|
u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
|
|
u8 target_vsel, current_vsel;
|
|
int ret;
|
|
|
|
ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
vc_valid = vc->common->valid;
|
|
vc_bypass_val_reg = vc->common->bypass_val_reg;
|
|
vc_bypass_value = (target_vsel << vc->common->data_shift) |
|
|
(vc->volt_reg_addr << vc->common->regaddr_shift) |
|
|
(vc->i2c_slave_addr << vc->common->slaveaddr_shift);
|
|
|
|
voltdm->write(vc_bypass_value, vc_bypass_val_reg);
|
|
voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg);
|
|
|
|
vc_bypass_value = voltdm->read(vc_bypass_val_reg);
|
|
/*
|
|
* Loop till the bypass command is acknowledged from the SMPS.
|
|
* NOTE: This is legacy code. The loop count and retry count needs
|
|
* to be revisited.
|
|
*/
|
|
while (!(vc_bypass_value & vc_valid)) {
|
|
loop_cnt++;
|
|
|
|
if (retries_cnt > 10) {
|
|
pr_warning("%s: Retry count exceeded\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (loop_cnt > 50) {
|
|
retries_cnt++;
|
|
loop_cnt = 0;
|
|
udelay(10);
|
|
}
|
|
vc_bypass_value = voltdm->read(vc_bypass_val_reg);
|
|
}
|
|
|
|
omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
|
|
return 0;
|
|
}
|
|
|
|
static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
|
|
{
|
|
/*
|
|
* Voltage Manager FSM parameters init
|
|
* XXX This data should be passed in from the board file
|
|
*/
|
|
voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET);
|
|
voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET);
|
|
voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET);
|
|
}
|
|
|
|
static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
|
|
{
|
|
static bool is_initialized;
|
|
|
|
if (is_initialized)
|
|
return;
|
|
|
|
omap3_vfsm_init(voltdm);
|
|
|
|
is_initialized = true;
|
|
}
|
|
|
|
|
|
/* OMAP4 specific voltage init functions */
|
|
static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
|
|
{
|
|
static bool is_initialized;
|
|
u32 vc_val;
|
|
|
|
if (is_initialized)
|
|
return;
|
|
|
|
/* XXX These are magic numbers and do not belong! */
|
|
vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
|
|
voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
|
|
|
|
is_initialized = true;
|
|
}
|
|
|
|
/**
|
|
* omap_vc_i2c_init - initialize I2C interface to PMIC
|
|
* @voltdm: voltage domain containing VC data
|
|
*
|
|
* Use PMIC supplied settings for I2C high-speed mode and
|
|
* master code (if set) and program the VC I2C configuration
|
|
* register.
|
|
*
|
|
* The VC I2C configuration is common to all VC channels,
|
|
* so this function only configures I2C for the first VC
|
|
* channel registers. All other VC channels will use the
|
|
* same configuration.
|
|
*/
|
|
static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
|
|
{
|
|
struct omap_vc_channel *vc = voltdm->vc;
|
|
static bool initialized;
|
|
static bool i2c_high_speed;
|
|
u8 mcode;
|
|
|
|
if (initialized) {
|
|
if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
|
|
pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
|
|
__func__, voltdm->name, i2c_high_speed);
|
|
return;
|
|
}
|
|
|
|
i2c_high_speed = voltdm->pmic->i2c_high_speed;
|
|
if (i2c_high_speed)
|
|
voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
|
|
vc->common->i2c_cfg_hsen_mask,
|
|
vc->common->i2c_cfg_reg);
|
|
|
|
mcode = voltdm->pmic->i2c_mcode;
|
|
if (mcode)
|
|
voltdm->rmw(vc->common->i2c_mcode_mask,
|
|
mcode << __ffs(vc->common->i2c_mcode_mask),
|
|
vc->common->i2c_cfg_reg);
|
|
|
|
initialized = true;
|
|
}
|
|
|
|
void __init omap_vc_init_channel(struct voltagedomain *voltdm)
|
|
{
|
|
struct omap_vc_channel *vc = voltdm->vc;
|
|
u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
|
|
u32 val;
|
|
|
|
if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
|
|
pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);
|
|
return;
|
|
}
|
|
|
|
if (!voltdm->read || !voltdm->write) {
|
|
pr_err("%s: No read/write API for accessing vdd_%s regs\n",
|
|
__func__, voltdm->name);
|
|
return;
|
|
}
|
|
|
|
vc->cfg_channel = 0;
|
|
if (vc->flags & OMAP_VC_CHANNEL_CFG_MUTANT)
|
|
vc_cfg_bits = &vc_mutant_channel_cfg;
|
|
else
|
|
vc_cfg_bits = &vc_default_channel_cfg;
|
|
|
|
/* get PMIC/board specific settings */
|
|
vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
|
|
vc->volt_reg_addr = voltdm->pmic->volt_reg_addr;
|
|
vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr;
|
|
vc->setup_time = voltdm->pmic->volt_setup_time;
|
|
|
|
/* Configure the i2c slave address for this VC */
|
|
voltdm->rmw(vc->smps_sa_mask,
|
|
vc->i2c_slave_addr << __ffs(vc->smps_sa_mask),
|
|
vc->smps_sa_reg);
|
|
vc->cfg_channel |= vc_cfg_bits->sa;
|
|
|
|
/*
|
|
* Configure the PMIC register addresses.
|
|
*/
|
|
voltdm->rmw(vc->smps_volra_mask,
|
|
vc->volt_reg_addr << __ffs(vc->smps_volra_mask),
|
|
vc->smps_volra_reg);
|
|
vc->cfg_channel |= vc_cfg_bits->rav;
|
|
|
|
if (vc->cmd_reg_addr) {
|
|
voltdm->rmw(vc->smps_cmdra_mask,
|
|
vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask),
|
|
vc->smps_cmdra_reg);
|
|
vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen;
|
|
}
|
|
|
|
/* Set up the on, inactive, retention and off voltage */
|
|
on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt);
|
|
onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt);
|
|
ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt);
|
|
off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt);
|
|
val = ((on_vsel << vc->common->cmd_on_shift) |
|
|
(onlp_vsel << vc->common->cmd_onlp_shift) |
|
|
(ret_vsel << vc->common->cmd_ret_shift) |
|
|
(off_vsel << vc->common->cmd_off_shift));
|
|
voltdm->write(val, vc->cmdval_reg);
|
|
vc->cfg_channel |= vc_cfg_bits->cmd;
|
|
|
|
/* Channel configuration */
|
|
omap_vc_config_channel(voltdm);
|
|
|
|
/* Configure the setup times */
|
|
voltdm->rmw(voltdm->vfsm->voltsetup_mask,
|
|
vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask),
|
|
voltdm->vfsm->voltsetup_reg);
|
|
|
|
omap_vc_i2c_init(voltdm);
|
|
|
|
if (cpu_is_omap34xx())
|
|
omap3_vc_init_channel(voltdm);
|
|
else if (cpu_is_omap44xx())
|
|
omap4_vc_init_channel(voltdm);
|
|
}
|
|
|