mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 02:05:20 +07:00
2e0e62285c
Add call to configure dropping egress LLDP packets in ice_vsi_setup and remove the rule in ice_vsi_release. Add calls to add/remove rule to route LLDP packets to default VSI when FW LLDP engine is disabled/enabled and remove rule if applied during ice_vsi_release. In the function ice_add_eth_mac(), there is a line that hard codes the filter info flag to TX. This is incorrect as this flag will be set by the calling function that built the list of filters to add. So remove the hard coded value. This patch also contains a fix to stop treating the DCBx state of "Not Started" as an error state that kicks DCB in SW mode. This will address having non-cabled interfaces automatically go into SW mode with the FW engine running. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2759 lines
81 KiB
C
2759 lines
81 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright (c) 2018, Intel Corporation. */
|
|
|
|
#include "ice_switch.h"
|
|
|
|
#define ICE_ETH_DA_OFFSET 0
|
|
#define ICE_ETH_ETHTYPE_OFFSET 12
|
|
#define ICE_ETH_VLAN_TCI_OFFSET 14
|
|
#define ICE_MAX_VLAN_ID 0xFFF
|
|
|
|
/* Dummy ethernet header needed in the ice_aqc_sw_rules_elem
|
|
* struct to configure any switch filter rules.
|
|
* {DA (6 bytes), SA(6 bytes),
|
|
* Ether type (2 bytes for header without VLAN tag) OR
|
|
* VLAN tag (4 bytes for header with VLAN tag) }
|
|
*
|
|
* Word on Hardcoded values
|
|
* byte 0 = 0x2: to identify it as locally administered DA MAC
|
|
* byte 6 = 0x2: to identify it as locally administered SA MAC
|
|
* byte 12 = 0x81 & byte 13 = 0x00:
|
|
* In case of VLAN filter first two bytes defines ether type (0x8100)
|
|
* and remaining two bytes are placeholder for programming a given VLAN ID
|
|
* In case of Ether type filter it is treated as header without VLAN tag
|
|
* and byte 12 and 13 is used to program a given Ether type instead
|
|
*/
|
|
#define DUMMY_ETH_HDR_LEN 16
|
|
static const u8 dummy_eth_header[DUMMY_ETH_HDR_LEN] = { 0x2, 0, 0, 0, 0, 0,
|
|
0x2, 0, 0, 0, 0, 0,
|
|
0x81, 0, 0, 0};
|
|
|
|
#define ICE_SW_RULE_RX_TX_ETH_HDR_SIZE \
|
|
(sizeof(struct ice_aqc_sw_rules_elem) - \
|
|
sizeof(((struct ice_aqc_sw_rules_elem *)0)->pdata) + \
|
|
sizeof(struct ice_sw_rule_lkup_rx_tx) + DUMMY_ETH_HDR_LEN - 1)
|
|
#define ICE_SW_RULE_RX_TX_NO_HDR_SIZE \
|
|
(sizeof(struct ice_aqc_sw_rules_elem) - \
|
|
sizeof(((struct ice_aqc_sw_rules_elem *)0)->pdata) + \
|
|
sizeof(struct ice_sw_rule_lkup_rx_tx) - 1)
|
|
#define ICE_SW_RULE_LG_ACT_SIZE(n) \
|
|
(sizeof(struct ice_aqc_sw_rules_elem) - \
|
|
sizeof(((struct ice_aqc_sw_rules_elem *)0)->pdata) + \
|
|
sizeof(struct ice_sw_rule_lg_act) - \
|
|
sizeof(((struct ice_sw_rule_lg_act *)0)->act) + \
|
|
((n) * sizeof(((struct ice_sw_rule_lg_act *)0)->act)))
|
|
#define ICE_SW_RULE_VSI_LIST_SIZE(n) \
|
|
(sizeof(struct ice_aqc_sw_rules_elem) - \
|
|
sizeof(((struct ice_aqc_sw_rules_elem *)0)->pdata) + \
|
|
sizeof(struct ice_sw_rule_vsi_list) - \
|
|
sizeof(((struct ice_sw_rule_vsi_list *)0)->vsi) + \
|
|
((n) * sizeof(((struct ice_sw_rule_vsi_list *)0)->vsi)))
|
|
|
|
/**
|
|
* ice_aq_alloc_free_res - command to allocate/free resources
|
|
* @hw: pointer to the HW struct
|
|
* @num_entries: number of resource entries in buffer
|
|
* @buf: Indirect buffer to hold data parameters and response
|
|
* @buf_size: size of buffer for indirect commands
|
|
* @opc: pass in the command opcode
|
|
* @cd: pointer to command details structure or NULL
|
|
*
|
|
* Helper function to allocate/free resources using the admin queue commands
|
|
*/
|
|
static enum ice_status
|
|
ice_aq_alloc_free_res(struct ice_hw *hw, u16 num_entries,
|
|
struct ice_aqc_alloc_free_res_elem *buf, u16 buf_size,
|
|
enum ice_adminq_opc opc, struct ice_sq_cd *cd)
|
|
{
|
|
struct ice_aqc_alloc_free_res_cmd *cmd;
|
|
struct ice_aq_desc desc;
|
|
|
|
cmd = &desc.params.sw_res_ctrl;
|
|
|
|
if (!buf)
|
|
return ICE_ERR_PARAM;
|
|
|
|
if (buf_size < (num_entries * sizeof(buf->elem[0])))
|
|
return ICE_ERR_PARAM;
|
|
|
|
ice_fill_dflt_direct_cmd_desc(&desc, opc);
|
|
|
|
desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
|
|
|
|
cmd->num_entries = cpu_to_le16(num_entries);
|
|
|
|
return ice_aq_send_cmd(hw, &desc, buf, buf_size, cd);
|
|
}
|
|
|
|
/**
|
|
* ice_init_def_sw_recp - initialize the recipe book keeping tables
|
|
* @hw: pointer to the HW struct
|
|
*
|
|
* Allocate memory for the entire recipe table and initialize the structures/
|
|
* entries corresponding to basic recipes.
|
|
*/
|
|
enum ice_status ice_init_def_sw_recp(struct ice_hw *hw)
|
|
{
|
|
struct ice_sw_recipe *recps;
|
|
u8 i;
|
|
|
|
recps = devm_kcalloc(ice_hw_to_dev(hw), ICE_MAX_NUM_RECIPES,
|
|
sizeof(*recps), GFP_KERNEL);
|
|
if (!recps)
|
|
return ICE_ERR_NO_MEMORY;
|
|
|
|
for (i = 0; i < ICE_SW_LKUP_LAST; i++) {
|
|
recps[i].root_rid = i;
|
|
INIT_LIST_HEAD(&recps[i].filt_rules);
|
|
INIT_LIST_HEAD(&recps[i].filt_replay_rules);
|
|
mutex_init(&recps[i].filt_rule_lock);
|
|
}
|
|
|
|
hw->switch_info->recp_list = recps;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ice_aq_get_sw_cfg - get switch configuration
|
|
* @hw: pointer to the hardware structure
|
|
* @buf: pointer to the result buffer
|
|
* @buf_size: length of the buffer available for response
|
|
* @req_desc: pointer to requested descriptor
|
|
* @num_elems: pointer to number of elements
|
|
* @cd: pointer to command details structure or NULL
|
|
*
|
|
* Get switch configuration (0x0200) to be placed in 'buff'.
|
|
* This admin command returns information such as initial VSI/port number
|
|
* and switch ID it belongs to.
|
|
*
|
|
* NOTE: *req_desc is both an input/output parameter.
|
|
* The caller of this function first calls this function with *request_desc set
|
|
* to 0. If the response from f/w has *req_desc set to 0, all the switch
|
|
* configuration information has been returned; if non-zero (meaning not all
|
|
* the information was returned), the caller should call this function again
|
|
* with *req_desc set to the previous value returned by f/w to get the
|
|
* next block of switch configuration information.
|
|
*
|
|
* *num_elems is output only parameter. This reflects the number of elements
|
|
* in response buffer. The caller of this function to use *num_elems while
|
|
* parsing the response buffer.
|
|
*/
|
|
static enum ice_status
|
|
ice_aq_get_sw_cfg(struct ice_hw *hw, struct ice_aqc_get_sw_cfg_resp *buf,
|
|
u16 buf_size, u16 *req_desc, u16 *num_elems,
|
|
struct ice_sq_cd *cd)
|
|
{
|
|
struct ice_aqc_get_sw_cfg *cmd;
|
|
enum ice_status status;
|
|
struct ice_aq_desc desc;
|
|
|
|
ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_sw_cfg);
|
|
cmd = &desc.params.get_sw_conf;
|
|
cmd->element = cpu_to_le16(*req_desc);
|
|
|
|
status = ice_aq_send_cmd(hw, &desc, buf, buf_size, cd);
|
|
if (!status) {
|
|
*req_desc = le16_to_cpu(cmd->element);
|
|
*num_elems = le16_to_cpu(cmd->num_elems);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_aq_add_vsi
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_ctx: pointer to a VSI context struct
|
|
* @cd: pointer to command details structure or NULL
|
|
*
|
|
* Add a VSI context to the hardware (0x0210)
|
|
*/
|
|
static enum ice_status
|
|
ice_aq_add_vsi(struct ice_hw *hw, struct ice_vsi_ctx *vsi_ctx,
|
|
struct ice_sq_cd *cd)
|
|
{
|
|
struct ice_aqc_add_update_free_vsi_resp *res;
|
|
struct ice_aqc_add_get_update_free_vsi *cmd;
|
|
struct ice_aq_desc desc;
|
|
enum ice_status status;
|
|
|
|
cmd = &desc.params.vsi_cmd;
|
|
res = &desc.params.add_update_free_vsi_res;
|
|
|
|
ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_add_vsi);
|
|
|
|
if (!vsi_ctx->alloc_from_pool)
|
|
cmd->vsi_num = cpu_to_le16(vsi_ctx->vsi_num |
|
|
ICE_AQ_VSI_IS_VALID);
|
|
cmd->vf_id = vsi_ctx->vf_num;
|
|
|
|
cmd->vsi_flags = cpu_to_le16(vsi_ctx->flags);
|
|
|
|
desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
|
|
|
|
status = ice_aq_send_cmd(hw, &desc, &vsi_ctx->info,
|
|
sizeof(vsi_ctx->info), cd);
|
|
|
|
if (!status) {
|
|
vsi_ctx->vsi_num = le16_to_cpu(res->vsi_num) & ICE_AQ_VSI_NUM_M;
|
|
vsi_ctx->vsis_allocd = le16_to_cpu(res->vsi_used);
|
|
vsi_ctx->vsis_unallocated = le16_to_cpu(res->vsi_free);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_aq_free_vsi
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_ctx: pointer to a VSI context struct
|
|
* @keep_vsi_alloc: keep VSI allocation as part of this PF's resources
|
|
* @cd: pointer to command details structure or NULL
|
|
*
|
|
* Free VSI context info from hardware (0x0213)
|
|
*/
|
|
static enum ice_status
|
|
ice_aq_free_vsi(struct ice_hw *hw, struct ice_vsi_ctx *vsi_ctx,
|
|
bool keep_vsi_alloc, struct ice_sq_cd *cd)
|
|
{
|
|
struct ice_aqc_add_update_free_vsi_resp *resp;
|
|
struct ice_aqc_add_get_update_free_vsi *cmd;
|
|
struct ice_aq_desc desc;
|
|
enum ice_status status;
|
|
|
|
cmd = &desc.params.vsi_cmd;
|
|
resp = &desc.params.add_update_free_vsi_res;
|
|
|
|
ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_free_vsi);
|
|
|
|
cmd->vsi_num = cpu_to_le16(vsi_ctx->vsi_num | ICE_AQ_VSI_IS_VALID);
|
|
if (keep_vsi_alloc)
|
|
cmd->cmd_flags = cpu_to_le16(ICE_AQ_VSI_KEEP_ALLOC);
|
|
|
|
status = ice_aq_send_cmd(hw, &desc, NULL, 0, cd);
|
|
if (!status) {
|
|
vsi_ctx->vsis_allocd = le16_to_cpu(resp->vsi_used);
|
|
vsi_ctx->vsis_unallocated = le16_to_cpu(resp->vsi_free);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_aq_update_vsi
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_ctx: pointer to a VSI context struct
|
|
* @cd: pointer to command details structure or NULL
|
|
*
|
|
* Update VSI context in the hardware (0x0211)
|
|
*/
|
|
static enum ice_status
|
|
ice_aq_update_vsi(struct ice_hw *hw, struct ice_vsi_ctx *vsi_ctx,
|
|
struct ice_sq_cd *cd)
|
|
{
|
|
struct ice_aqc_add_update_free_vsi_resp *resp;
|
|
struct ice_aqc_add_get_update_free_vsi *cmd;
|
|
struct ice_aq_desc desc;
|
|
enum ice_status status;
|
|
|
|
cmd = &desc.params.vsi_cmd;
|
|
resp = &desc.params.add_update_free_vsi_res;
|
|
|
|
ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_update_vsi);
|
|
|
|
cmd->vsi_num = cpu_to_le16(vsi_ctx->vsi_num | ICE_AQ_VSI_IS_VALID);
|
|
|
|
desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
|
|
|
|
status = ice_aq_send_cmd(hw, &desc, &vsi_ctx->info,
|
|
sizeof(vsi_ctx->info), cd);
|
|
|
|
if (!status) {
|
|
vsi_ctx->vsis_allocd = le16_to_cpu(resp->vsi_used);
|
|
vsi_ctx->vsis_unallocated = le16_to_cpu(resp->vsi_free);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_is_vsi_valid - check whether the VSI is valid or not
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_handle: VSI handle
|
|
*
|
|
* check whether the VSI is valid or not
|
|
*/
|
|
bool ice_is_vsi_valid(struct ice_hw *hw, u16 vsi_handle)
|
|
{
|
|
return vsi_handle < ICE_MAX_VSI && hw->vsi_ctx[vsi_handle];
|
|
}
|
|
|
|
/**
|
|
* ice_get_hw_vsi_num - return the HW VSI number
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_handle: VSI handle
|
|
*
|
|
* return the HW VSI number
|
|
* Caution: call this function only if VSI is valid (ice_is_vsi_valid)
|
|
*/
|
|
u16 ice_get_hw_vsi_num(struct ice_hw *hw, u16 vsi_handle)
|
|
{
|
|
return hw->vsi_ctx[vsi_handle]->vsi_num;
|
|
}
|
|
|
|
/**
|
|
* ice_get_vsi_ctx - return the VSI context entry for a given VSI handle
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_handle: VSI handle
|
|
*
|
|
* return the VSI context entry for a given VSI handle
|
|
*/
|
|
struct ice_vsi_ctx *ice_get_vsi_ctx(struct ice_hw *hw, u16 vsi_handle)
|
|
{
|
|
return (vsi_handle >= ICE_MAX_VSI) ? NULL : hw->vsi_ctx[vsi_handle];
|
|
}
|
|
|
|
/**
|
|
* ice_save_vsi_ctx - save the VSI context for a given VSI handle
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_handle: VSI handle
|
|
* @vsi: VSI context pointer
|
|
*
|
|
* save the VSI context entry for a given VSI handle
|
|
*/
|
|
static void
|
|
ice_save_vsi_ctx(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi)
|
|
{
|
|
hw->vsi_ctx[vsi_handle] = vsi;
|
|
}
|
|
|
|
/**
|
|
* ice_clear_vsi_q_ctx - clear VSI queue contexts for all TCs
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_handle: VSI handle
|
|
*/
|
|
static void ice_clear_vsi_q_ctx(struct ice_hw *hw, u16 vsi_handle)
|
|
{
|
|
struct ice_vsi_ctx *vsi;
|
|
u8 i;
|
|
|
|
vsi = ice_get_vsi_ctx(hw, vsi_handle);
|
|
if (!vsi)
|
|
return;
|
|
ice_for_each_traffic_class(i) {
|
|
if (vsi->lan_q_ctx[i]) {
|
|
devm_kfree(ice_hw_to_dev(hw), vsi->lan_q_ctx[i]);
|
|
vsi->lan_q_ctx[i] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ice_clear_vsi_ctx - clear the VSI context entry
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_handle: VSI handle
|
|
*
|
|
* clear the VSI context entry
|
|
*/
|
|
static void ice_clear_vsi_ctx(struct ice_hw *hw, u16 vsi_handle)
|
|
{
|
|
struct ice_vsi_ctx *vsi;
|
|
|
|
vsi = ice_get_vsi_ctx(hw, vsi_handle);
|
|
if (vsi) {
|
|
ice_clear_vsi_q_ctx(hw, vsi_handle);
|
|
devm_kfree(ice_hw_to_dev(hw), vsi);
|
|
hw->vsi_ctx[vsi_handle] = NULL;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ice_clear_all_vsi_ctx - clear all the VSI context entries
|
|
* @hw: pointer to the HW struct
|
|
*/
|
|
void ice_clear_all_vsi_ctx(struct ice_hw *hw)
|
|
{
|
|
u16 i;
|
|
|
|
for (i = 0; i < ICE_MAX_VSI; i++)
|
|
ice_clear_vsi_ctx(hw, i);
|
|
}
|
|
|
|
/**
|
|
* ice_add_vsi - add VSI context to the hardware and VSI handle list
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_handle: unique VSI handle provided by drivers
|
|
* @vsi_ctx: pointer to a VSI context struct
|
|
* @cd: pointer to command details structure or NULL
|
|
*
|
|
* Add a VSI context to the hardware also add it into the VSI handle list.
|
|
* If this function gets called after reset for existing VSIs then update
|
|
* with the new HW VSI number in the corresponding VSI handle list entry.
|
|
*/
|
|
enum ice_status
|
|
ice_add_vsi(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi_ctx,
|
|
struct ice_sq_cd *cd)
|
|
{
|
|
struct ice_vsi_ctx *tmp_vsi_ctx;
|
|
enum ice_status status;
|
|
|
|
if (vsi_handle >= ICE_MAX_VSI)
|
|
return ICE_ERR_PARAM;
|
|
status = ice_aq_add_vsi(hw, vsi_ctx, cd);
|
|
if (status)
|
|
return status;
|
|
tmp_vsi_ctx = ice_get_vsi_ctx(hw, vsi_handle);
|
|
if (!tmp_vsi_ctx) {
|
|
/* Create a new VSI context */
|
|
tmp_vsi_ctx = devm_kzalloc(ice_hw_to_dev(hw),
|
|
sizeof(*tmp_vsi_ctx), GFP_KERNEL);
|
|
if (!tmp_vsi_ctx) {
|
|
ice_aq_free_vsi(hw, vsi_ctx, false, cd);
|
|
return ICE_ERR_NO_MEMORY;
|
|
}
|
|
*tmp_vsi_ctx = *vsi_ctx;
|
|
ice_save_vsi_ctx(hw, vsi_handle, tmp_vsi_ctx);
|
|
} else {
|
|
/* update with new HW VSI num */
|
|
if (tmp_vsi_ctx->vsi_num != vsi_ctx->vsi_num)
|
|
tmp_vsi_ctx->vsi_num = vsi_ctx->vsi_num;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ice_free_vsi- free VSI context from hardware and VSI handle list
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_handle: unique VSI handle
|
|
* @vsi_ctx: pointer to a VSI context struct
|
|
* @keep_vsi_alloc: keep VSI allocation as part of this PF's resources
|
|
* @cd: pointer to command details structure or NULL
|
|
*
|
|
* Free VSI context info from hardware as well as from VSI handle list
|
|
*/
|
|
enum ice_status
|
|
ice_free_vsi(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi_ctx,
|
|
bool keep_vsi_alloc, struct ice_sq_cd *cd)
|
|
{
|
|
enum ice_status status;
|
|
|
|
if (!ice_is_vsi_valid(hw, vsi_handle))
|
|
return ICE_ERR_PARAM;
|
|
vsi_ctx->vsi_num = ice_get_hw_vsi_num(hw, vsi_handle);
|
|
status = ice_aq_free_vsi(hw, vsi_ctx, keep_vsi_alloc, cd);
|
|
if (!status)
|
|
ice_clear_vsi_ctx(hw, vsi_handle);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_update_vsi
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_handle: unique VSI handle
|
|
* @vsi_ctx: pointer to a VSI context struct
|
|
* @cd: pointer to command details structure or NULL
|
|
*
|
|
* Update VSI context in the hardware
|
|
*/
|
|
enum ice_status
|
|
ice_update_vsi(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi_ctx,
|
|
struct ice_sq_cd *cd)
|
|
{
|
|
if (!ice_is_vsi_valid(hw, vsi_handle))
|
|
return ICE_ERR_PARAM;
|
|
vsi_ctx->vsi_num = ice_get_hw_vsi_num(hw, vsi_handle);
|
|
return ice_aq_update_vsi(hw, vsi_ctx, cd);
|
|
}
|
|
|
|
/**
|
|
* ice_aq_alloc_free_vsi_list
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_list_id: VSI list ID returned or used for lookup
|
|
* @lkup_type: switch rule filter lookup type
|
|
* @opc: switch rules population command type - pass in the command opcode
|
|
*
|
|
* allocates or free a VSI list resource
|
|
*/
|
|
static enum ice_status
|
|
ice_aq_alloc_free_vsi_list(struct ice_hw *hw, u16 *vsi_list_id,
|
|
enum ice_sw_lkup_type lkup_type,
|
|
enum ice_adminq_opc opc)
|
|
{
|
|
struct ice_aqc_alloc_free_res_elem *sw_buf;
|
|
struct ice_aqc_res_elem *vsi_ele;
|
|
enum ice_status status;
|
|
u16 buf_len;
|
|
|
|
buf_len = sizeof(*sw_buf);
|
|
sw_buf = devm_kzalloc(ice_hw_to_dev(hw), buf_len, GFP_KERNEL);
|
|
if (!sw_buf)
|
|
return ICE_ERR_NO_MEMORY;
|
|
sw_buf->num_elems = cpu_to_le16(1);
|
|
|
|
if (lkup_type == ICE_SW_LKUP_MAC ||
|
|
lkup_type == ICE_SW_LKUP_MAC_VLAN ||
|
|
lkup_type == ICE_SW_LKUP_ETHERTYPE ||
|
|
lkup_type == ICE_SW_LKUP_ETHERTYPE_MAC ||
|
|
lkup_type == ICE_SW_LKUP_PROMISC ||
|
|
lkup_type == ICE_SW_LKUP_PROMISC_VLAN) {
|
|
sw_buf->res_type = cpu_to_le16(ICE_AQC_RES_TYPE_VSI_LIST_REP);
|
|
} else if (lkup_type == ICE_SW_LKUP_VLAN) {
|
|
sw_buf->res_type =
|
|
cpu_to_le16(ICE_AQC_RES_TYPE_VSI_LIST_PRUNE);
|
|
} else {
|
|
status = ICE_ERR_PARAM;
|
|
goto ice_aq_alloc_free_vsi_list_exit;
|
|
}
|
|
|
|
if (opc == ice_aqc_opc_free_res)
|
|
sw_buf->elem[0].e.sw_resp = cpu_to_le16(*vsi_list_id);
|
|
|
|
status = ice_aq_alloc_free_res(hw, 1, sw_buf, buf_len, opc, NULL);
|
|
if (status)
|
|
goto ice_aq_alloc_free_vsi_list_exit;
|
|
|
|
if (opc == ice_aqc_opc_alloc_res) {
|
|
vsi_ele = &sw_buf->elem[0];
|
|
*vsi_list_id = le16_to_cpu(vsi_ele->e.sw_resp);
|
|
}
|
|
|
|
ice_aq_alloc_free_vsi_list_exit:
|
|
devm_kfree(ice_hw_to_dev(hw), sw_buf);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_aq_sw_rules - add/update/remove switch rules
|
|
* @hw: pointer to the HW struct
|
|
* @rule_list: pointer to switch rule population list
|
|
* @rule_list_sz: total size of the rule list in bytes
|
|
* @num_rules: number of switch rules in the rule_list
|
|
* @opc: switch rules population command type - pass in the command opcode
|
|
* @cd: pointer to command details structure or NULL
|
|
*
|
|
* Add(0x02a0)/Update(0x02a1)/Remove(0x02a2) switch rules commands to firmware
|
|
*/
|
|
static enum ice_status
|
|
ice_aq_sw_rules(struct ice_hw *hw, void *rule_list, u16 rule_list_sz,
|
|
u8 num_rules, enum ice_adminq_opc opc, struct ice_sq_cd *cd)
|
|
{
|
|
struct ice_aq_desc desc;
|
|
|
|
if (opc != ice_aqc_opc_add_sw_rules &&
|
|
opc != ice_aqc_opc_update_sw_rules &&
|
|
opc != ice_aqc_opc_remove_sw_rules)
|
|
return ICE_ERR_PARAM;
|
|
|
|
ice_fill_dflt_direct_cmd_desc(&desc, opc);
|
|
|
|
desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
|
|
desc.params.sw_rules.num_rules_fltr_entry_index =
|
|
cpu_to_le16(num_rules);
|
|
return ice_aq_send_cmd(hw, &desc, rule_list, rule_list_sz, cd);
|
|
}
|
|
|
|
/* ice_init_port_info - Initialize port_info with switch configuration data
|
|
* @pi: pointer to port_info
|
|
* @vsi_port_num: VSI number or port number
|
|
* @type: Type of switch element (port or VSI)
|
|
* @swid: switch ID of the switch the element is attached to
|
|
* @pf_vf_num: PF or VF number
|
|
* @is_vf: true if the element is a VF, false otherwise
|
|
*/
|
|
static void
|
|
ice_init_port_info(struct ice_port_info *pi, u16 vsi_port_num, u8 type,
|
|
u16 swid, u16 pf_vf_num, bool is_vf)
|
|
{
|
|
switch (type) {
|
|
case ICE_AQC_GET_SW_CONF_RESP_PHYS_PORT:
|
|
pi->lport = (u8)(vsi_port_num & ICE_LPORT_MASK);
|
|
pi->sw_id = swid;
|
|
pi->pf_vf_num = pf_vf_num;
|
|
pi->is_vf = is_vf;
|
|
pi->dflt_tx_vsi_num = ICE_DFLT_VSI_INVAL;
|
|
pi->dflt_rx_vsi_num = ICE_DFLT_VSI_INVAL;
|
|
break;
|
|
default:
|
|
ice_debug(pi->hw, ICE_DBG_SW,
|
|
"incorrect VSI/port type received\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* ice_get_initial_sw_cfg - Get initial port and default VSI data
|
|
* @hw: pointer to the hardware structure
|
|
*/
|
|
enum ice_status ice_get_initial_sw_cfg(struct ice_hw *hw)
|
|
{
|
|
struct ice_aqc_get_sw_cfg_resp *rbuf;
|
|
enum ice_status status;
|
|
u16 req_desc = 0;
|
|
u16 num_elems;
|
|
u16 i;
|
|
|
|
rbuf = devm_kzalloc(ice_hw_to_dev(hw), ICE_SW_CFG_MAX_BUF_LEN,
|
|
GFP_KERNEL);
|
|
|
|
if (!rbuf)
|
|
return ICE_ERR_NO_MEMORY;
|
|
|
|
/* Multiple calls to ice_aq_get_sw_cfg may be required
|
|
* to get all the switch configuration information. The need
|
|
* for additional calls is indicated by ice_aq_get_sw_cfg
|
|
* writing a non-zero value in req_desc
|
|
*/
|
|
do {
|
|
status = ice_aq_get_sw_cfg(hw, rbuf, ICE_SW_CFG_MAX_BUF_LEN,
|
|
&req_desc, &num_elems, NULL);
|
|
|
|
if (status)
|
|
break;
|
|
|
|
for (i = 0; i < num_elems; i++) {
|
|
struct ice_aqc_get_sw_cfg_resp_elem *ele;
|
|
u16 pf_vf_num, swid, vsi_port_num;
|
|
bool is_vf = false;
|
|
u8 type;
|
|
|
|
ele = rbuf[i].elements;
|
|
vsi_port_num = le16_to_cpu(ele->vsi_port_num) &
|
|
ICE_AQC_GET_SW_CONF_RESP_VSI_PORT_NUM_M;
|
|
|
|
pf_vf_num = le16_to_cpu(ele->pf_vf_num) &
|
|
ICE_AQC_GET_SW_CONF_RESP_FUNC_NUM_M;
|
|
|
|
swid = le16_to_cpu(ele->swid);
|
|
|
|
if (le16_to_cpu(ele->pf_vf_num) &
|
|
ICE_AQC_GET_SW_CONF_RESP_IS_VF)
|
|
is_vf = true;
|
|
|
|
type = le16_to_cpu(ele->vsi_port_num) >>
|
|
ICE_AQC_GET_SW_CONF_RESP_TYPE_S;
|
|
|
|
if (type == ICE_AQC_GET_SW_CONF_RESP_VSI) {
|
|
/* FW VSI is not needed. Just continue. */
|
|
continue;
|
|
}
|
|
|
|
ice_init_port_info(hw->port_info, vsi_port_num,
|
|
type, swid, pf_vf_num, is_vf);
|
|
}
|
|
} while (req_desc && !status);
|
|
|
|
devm_kfree(ice_hw_to_dev(hw), (void *)rbuf);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_fill_sw_info - Helper function to populate lb_en and lan_en
|
|
* @hw: pointer to the hardware structure
|
|
* @fi: filter info structure to fill/update
|
|
*
|
|
* This helper function populates the lb_en and lan_en elements of the provided
|
|
* ice_fltr_info struct using the switch's type and characteristics of the
|
|
* switch rule being configured.
|
|
*/
|
|
static void ice_fill_sw_info(struct ice_hw *hw, struct ice_fltr_info *fi)
|
|
{
|
|
fi->lb_en = false;
|
|
fi->lan_en = false;
|
|
if ((fi->flag & ICE_FLTR_TX) &&
|
|
(fi->fltr_act == ICE_FWD_TO_VSI ||
|
|
fi->fltr_act == ICE_FWD_TO_VSI_LIST ||
|
|
fi->fltr_act == ICE_FWD_TO_Q ||
|
|
fi->fltr_act == ICE_FWD_TO_QGRP)) {
|
|
/* Setting LB for prune actions will result in replicated
|
|
* packets to the internal switch that will be dropped.
|
|
*/
|
|
if (fi->lkup_type != ICE_SW_LKUP_VLAN)
|
|
fi->lb_en = true;
|
|
|
|
/* Set lan_en to TRUE if
|
|
* 1. The switch is a VEB AND
|
|
* 2
|
|
* 2.1 The lookup is a directional lookup like ethertype,
|
|
* promiscuous, ethertype-MAC, promiscuous-VLAN
|
|
* and default-port OR
|
|
* 2.2 The lookup is VLAN, OR
|
|
* 2.3 The lookup is MAC with mcast or bcast addr for MAC, OR
|
|
* 2.4 The lookup is MAC_VLAN with mcast or bcast addr for MAC.
|
|
*
|
|
* OR
|
|
*
|
|
* The switch is a VEPA.
|
|
*
|
|
* In all other cases, the LAN enable has to be set to false.
|
|
*/
|
|
if (hw->evb_veb) {
|
|
if (fi->lkup_type == ICE_SW_LKUP_ETHERTYPE ||
|
|
fi->lkup_type == ICE_SW_LKUP_PROMISC ||
|
|
fi->lkup_type == ICE_SW_LKUP_ETHERTYPE_MAC ||
|
|
fi->lkup_type == ICE_SW_LKUP_PROMISC_VLAN ||
|
|
fi->lkup_type == ICE_SW_LKUP_DFLT ||
|
|
fi->lkup_type == ICE_SW_LKUP_VLAN ||
|
|
(fi->lkup_type == ICE_SW_LKUP_MAC &&
|
|
!is_unicast_ether_addr(fi->l_data.mac.mac_addr)) ||
|
|
(fi->lkup_type == ICE_SW_LKUP_MAC_VLAN &&
|
|
!is_unicast_ether_addr(fi->l_data.mac.mac_addr)))
|
|
fi->lan_en = true;
|
|
} else {
|
|
fi->lan_en = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ice_fill_sw_rule - Helper function to fill switch rule structure
|
|
* @hw: pointer to the hardware structure
|
|
* @f_info: entry containing packet forwarding information
|
|
* @s_rule: switch rule structure to be filled in based on mac_entry
|
|
* @opc: switch rules population command type - pass in the command opcode
|
|
*/
|
|
static void
|
|
ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info,
|
|
struct ice_aqc_sw_rules_elem *s_rule, enum ice_adminq_opc opc)
|
|
{
|
|
u16 vlan_id = ICE_MAX_VLAN_ID + 1;
|
|
void *daddr = NULL;
|
|
u16 eth_hdr_sz;
|
|
u8 *eth_hdr;
|
|
u32 act = 0;
|
|
__be16 *off;
|
|
u8 q_rgn;
|
|
|
|
if (opc == ice_aqc_opc_remove_sw_rules) {
|
|
s_rule->pdata.lkup_tx_rx.act = 0;
|
|
s_rule->pdata.lkup_tx_rx.index =
|
|
cpu_to_le16(f_info->fltr_rule_id);
|
|
s_rule->pdata.lkup_tx_rx.hdr_len = 0;
|
|
return;
|
|
}
|
|
|
|
eth_hdr_sz = sizeof(dummy_eth_header);
|
|
eth_hdr = s_rule->pdata.lkup_tx_rx.hdr;
|
|
|
|
/* initialize the ether header with a dummy header */
|
|
memcpy(eth_hdr, dummy_eth_header, eth_hdr_sz);
|
|
ice_fill_sw_info(hw, f_info);
|
|
|
|
switch (f_info->fltr_act) {
|
|
case ICE_FWD_TO_VSI:
|
|
act |= (f_info->fwd_id.hw_vsi_id << ICE_SINGLE_ACT_VSI_ID_S) &
|
|
ICE_SINGLE_ACT_VSI_ID_M;
|
|
if (f_info->lkup_type != ICE_SW_LKUP_VLAN)
|
|
act |= ICE_SINGLE_ACT_VSI_FORWARDING |
|
|
ICE_SINGLE_ACT_VALID_BIT;
|
|
break;
|
|
case ICE_FWD_TO_VSI_LIST:
|
|
act |= ICE_SINGLE_ACT_VSI_LIST;
|
|
act |= (f_info->fwd_id.vsi_list_id <<
|
|
ICE_SINGLE_ACT_VSI_LIST_ID_S) &
|
|
ICE_SINGLE_ACT_VSI_LIST_ID_M;
|
|
if (f_info->lkup_type != ICE_SW_LKUP_VLAN)
|
|
act |= ICE_SINGLE_ACT_VSI_FORWARDING |
|
|
ICE_SINGLE_ACT_VALID_BIT;
|
|
break;
|
|
case ICE_FWD_TO_Q:
|
|
act |= ICE_SINGLE_ACT_TO_Q;
|
|
act |= (f_info->fwd_id.q_id << ICE_SINGLE_ACT_Q_INDEX_S) &
|
|
ICE_SINGLE_ACT_Q_INDEX_M;
|
|
break;
|
|
case ICE_DROP_PACKET:
|
|
act |= ICE_SINGLE_ACT_VSI_FORWARDING | ICE_SINGLE_ACT_DROP |
|
|
ICE_SINGLE_ACT_VALID_BIT;
|
|
break;
|
|
case ICE_FWD_TO_QGRP:
|
|
q_rgn = f_info->qgrp_size > 0 ?
|
|
(u8)ilog2(f_info->qgrp_size) : 0;
|
|
act |= ICE_SINGLE_ACT_TO_Q;
|
|
act |= (f_info->fwd_id.q_id << ICE_SINGLE_ACT_Q_INDEX_S) &
|
|
ICE_SINGLE_ACT_Q_INDEX_M;
|
|
act |= (q_rgn << ICE_SINGLE_ACT_Q_REGION_S) &
|
|
ICE_SINGLE_ACT_Q_REGION_M;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
if (f_info->lb_en)
|
|
act |= ICE_SINGLE_ACT_LB_ENABLE;
|
|
if (f_info->lan_en)
|
|
act |= ICE_SINGLE_ACT_LAN_ENABLE;
|
|
|
|
switch (f_info->lkup_type) {
|
|
case ICE_SW_LKUP_MAC:
|
|
daddr = f_info->l_data.mac.mac_addr;
|
|
break;
|
|
case ICE_SW_LKUP_VLAN:
|
|
vlan_id = f_info->l_data.vlan.vlan_id;
|
|
if (f_info->fltr_act == ICE_FWD_TO_VSI ||
|
|
f_info->fltr_act == ICE_FWD_TO_VSI_LIST) {
|
|
act |= ICE_SINGLE_ACT_PRUNE;
|
|
act |= ICE_SINGLE_ACT_EGRESS | ICE_SINGLE_ACT_INGRESS;
|
|
}
|
|
break;
|
|
case ICE_SW_LKUP_ETHERTYPE_MAC:
|
|
daddr = f_info->l_data.ethertype_mac.mac_addr;
|
|
/* fall-through */
|
|
case ICE_SW_LKUP_ETHERTYPE:
|
|
off = (__force __be16 *)(eth_hdr + ICE_ETH_ETHTYPE_OFFSET);
|
|
*off = cpu_to_be16(f_info->l_data.ethertype_mac.ethertype);
|
|
break;
|
|
case ICE_SW_LKUP_MAC_VLAN:
|
|
daddr = f_info->l_data.mac_vlan.mac_addr;
|
|
vlan_id = f_info->l_data.mac_vlan.vlan_id;
|
|
break;
|
|
case ICE_SW_LKUP_PROMISC_VLAN:
|
|
vlan_id = f_info->l_data.mac_vlan.vlan_id;
|
|
/* fall-through */
|
|
case ICE_SW_LKUP_PROMISC:
|
|
daddr = f_info->l_data.mac_vlan.mac_addr;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
s_rule->type = (f_info->flag & ICE_FLTR_RX) ?
|
|
cpu_to_le16(ICE_AQC_SW_RULES_T_LKUP_RX) :
|
|
cpu_to_le16(ICE_AQC_SW_RULES_T_LKUP_TX);
|
|
|
|
/* Recipe set depending on lookup type */
|
|
s_rule->pdata.lkup_tx_rx.recipe_id = cpu_to_le16(f_info->lkup_type);
|
|
s_rule->pdata.lkup_tx_rx.src = cpu_to_le16(f_info->src);
|
|
s_rule->pdata.lkup_tx_rx.act = cpu_to_le32(act);
|
|
|
|
if (daddr)
|
|
ether_addr_copy(eth_hdr + ICE_ETH_DA_OFFSET, daddr);
|
|
|
|
if (!(vlan_id > ICE_MAX_VLAN_ID)) {
|
|
off = (__force __be16 *)(eth_hdr + ICE_ETH_VLAN_TCI_OFFSET);
|
|
*off = cpu_to_be16(vlan_id);
|
|
}
|
|
|
|
/* Create the switch rule with the final dummy Ethernet header */
|
|
if (opc != ice_aqc_opc_update_sw_rules)
|
|
s_rule->pdata.lkup_tx_rx.hdr_len = cpu_to_le16(eth_hdr_sz);
|
|
}
|
|
|
|
/**
|
|
* ice_add_marker_act
|
|
* @hw: pointer to the hardware structure
|
|
* @m_ent: the management entry for which sw marker needs to be added
|
|
* @sw_marker: sw marker to tag the Rx descriptor with
|
|
* @l_id: large action resource ID
|
|
*
|
|
* Create a large action to hold software marker and update the switch rule
|
|
* entry pointed by m_ent with newly created large action
|
|
*/
|
|
static enum ice_status
|
|
ice_add_marker_act(struct ice_hw *hw, struct ice_fltr_mgmt_list_entry *m_ent,
|
|
u16 sw_marker, u16 l_id)
|
|
{
|
|
struct ice_aqc_sw_rules_elem *lg_act, *rx_tx;
|
|
/* For software marker we need 3 large actions
|
|
* 1. FWD action: FWD TO VSI or VSI LIST
|
|
* 2. GENERIC VALUE action to hold the profile ID
|
|
* 3. GENERIC VALUE action to hold the software marker ID
|
|
*/
|
|
const u16 num_lg_acts = 3;
|
|
enum ice_status status;
|
|
u16 lg_act_size;
|
|
u16 rules_size;
|
|
u32 act;
|
|
u16 id;
|
|
|
|
if (m_ent->fltr_info.lkup_type != ICE_SW_LKUP_MAC)
|
|
return ICE_ERR_PARAM;
|
|
|
|
/* Create two back-to-back switch rules and submit them to the HW using
|
|
* one memory buffer:
|
|
* 1. Large Action
|
|
* 2. Look up Tx Rx
|
|
*/
|
|
lg_act_size = (u16)ICE_SW_RULE_LG_ACT_SIZE(num_lg_acts);
|
|
rules_size = lg_act_size + ICE_SW_RULE_RX_TX_ETH_HDR_SIZE;
|
|
lg_act = devm_kzalloc(ice_hw_to_dev(hw), rules_size, GFP_KERNEL);
|
|
if (!lg_act)
|
|
return ICE_ERR_NO_MEMORY;
|
|
|
|
rx_tx = (struct ice_aqc_sw_rules_elem *)((u8 *)lg_act + lg_act_size);
|
|
|
|
/* Fill in the first switch rule i.e. large action */
|
|
lg_act->type = cpu_to_le16(ICE_AQC_SW_RULES_T_LG_ACT);
|
|
lg_act->pdata.lg_act.index = cpu_to_le16(l_id);
|
|
lg_act->pdata.lg_act.size = cpu_to_le16(num_lg_acts);
|
|
|
|
/* First action VSI forwarding or VSI list forwarding depending on how
|
|
* many VSIs
|
|
*/
|
|
id = (m_ent->vsi_count > 1) ? m_ent->fltr_info.fwd_id.vsi_list_id :
|
|
m_ent->fltr_info.fwd_id.hw_vsi_id;
|
|
|
|
act = ICE_LG_ACT_VSI_FORWARDING | ICE_LG_ACT_VALID_BIT;
|
|
act |= (id << ICE_LG_ACT_VSI_LIST_ID_S) &
|
|
ICE_LG_ACT_VSI_LIST_ID_M;
|
|
if (m_ent->vsi_count > 1)
|
|
act |= ICE_LG_ACT_VSI_LIST;
|
|
lg_act->pdata.lg_act.act[0] = cpu_to_le32(act);
|
|
|
|
/* Second action descriptor type */
|
|
act = ICE_LG_ACT_GENERIC;
|
|
|
|
act |= (1 << ICE_LG_ACT_GENERIC_VALUE_S) & ICE_LG_ACT_GENERIC_VALUE_M;
|
|
lg_act->pdata.lg_act.act[1] = cpu_to_le32(act);
|
|
|
|
act = (ICE_LG_ACT_GENERIC_OFF_RX_DESC_PROF_IDX <<
|
|
ICE_LG_ACT_GENERIC_OFFSET_S) & ICE_LG_ACT_GENERIC_OFFSET_M;
|
|
|
|
/* Third action Marker value */
|
|
act |= ICE_LG_ACT_GENERIC;
|
|
act |= (sw_marker << ICE_LG_ACT_GENERIC_VALUE_S) &
|
|
ICE_LG_ACT_GENERIC_VALUE_M;
|
|
|
|
lg_act->pdata.lg_act.act[2] = cpu_to_le32(act);
|
|
|
|
/* call the fill switch rule to fill the lookup Tx Rx structure */
|
|
ice_fill_sw_rule(hw, &m_ent->fltr_info, rx_tx,
|
|
ice_aqc_opc_update_sw_rules);
|
|
|
|
/* Update the action to point to the large action ID */
|
|
rx_tx->pdata.lkup_tx_rx.act =
|
|
cpu_to_le32(ICE_SINGLE_ACT_PTR |
|
|
((l_id << ICE_SINGLE_ACT_PTR_VAL_S) &
|
|
ICE_SINGLE_ACT_PTR_VAL_M));
|
|
|
|
/* Use the filter rule ID of the previously created rule with single
|
|
* act. Once the update happens, hardware will treat this as large
|
|
* action
|
|
*/
|
|
rx_tx->pdata.lkup_tx_rx.index =
|
|
cpu_to_le16(m_ent->fltr_info.fltr_rule_id);
|
|
|
|
status = ice_aq_sw_rules(hw, lg_act, rules_size, 2,
|
|
ice_aqc_opc_update_sw_rules, NULL);
|
|
if (!status) {
|
|
m_ent->lg_act_idx = l_id;
|
|
m_ent->sw_marker_id = sw_marker;
|
|
}
|
|
|
|
devm_kfree(ice_hw_to_dev(hw), lg_act);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_create_vsi_list_map
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle_arr: array of VSI handles to set in the VSI mapping
|
|
* @num_vsi: number of VSI handles in the array
|
|
* @vsi_list_id: VSI list ID generated as part of allocate resource
|
|
*
|
|
* Helper function to create a new entry of VSI list ID to VSI mapping
|
|
* using the given VSI list ID
|
|
*/
|
|
static struct ice_vsi_list_map_info *
|
|
ice_create_vsi_list_map(struct ice_hw *hw, u16 *vsi_handle_arr, u16 num_vsi,
|
|
u16 vsi_list_id)
|
|
{
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
struct ice_vsi_list_map_info *v_map;
|
|
int i;
|
|
|
|
v_map = devm_kcalloc(ice_hw_to_dev(hw), 1, sizeof(*v_map), GFP_KERNEL);
|
|
if (!v_map)
|
|
return NULL;
|
|
|
|
v_map->vsi_list_id = vsi_list_id;
|
|
v_map->ref_cnt = 1;
|
|
for (i = 0; i < num_vsi; i++)
|
|
set_bit(vsi_handle_arr[i], v_map->vsi_map);
|
|
|
|
list_add(&v_map->list_entry, &sw->vsi_list_map_head);
|
|
return v_map;
|
|
}
|
|
|
|
/**
|
|
* ice_update_vsi_list_rule
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle_arr: array of VSI handles to form a VSI list
|
|
* @num_vsi: number of VSI handles in the array
|
|
* @vsi_list_id: VSI list ID generated as part of allocate resource
|
|
* @remove: Boolean value to indicate if this is a remove action
|
|
* @opc: switch rules population command type - pass in the command opcode
|
|
* @lkup_type: lookup type of the filter
|
|
*
|
|
* Call AQ command to add a new switch rule or update existing switch rule
|
|
* using the given VSI list ID
|
|
*/
|
|
static enum ice_status
|
|
ice_update_vsi_list_rule(struct ice_hw *hw, u16 *vsi_handle_arr, u16 num_vsi,
|
|
u16 vsi_list_id, bool remove, enum ice_adminq_opc opc,
|
|
enum ice_sw_lkup_type lkup_type)
|
|
{
|
|
struct ice_aqc_sw_rules_elem *s_rule;
|
|
enum ice_status status;
|
|
u16 s_rule_size;
|
|
u16 type;
|
|
int i;
|
|
|
|
if (!num_vsi)
|
|
return ICE_ERR_PARAM;
|
|
|
|
if (lkup_type == ICE_SW_LKUP_MAC ||
|
|
lkup_type == ICE_SW_LKUP_MAC_VLAN ||
|
|
lkup_type == ICE_SW_LKUP_ETHERTYPE ||
|
|
lkup_type == ICE_SW_LKUP_ETHERTYPE_MAC ||
|
|
lkup_type == ICE_SW_LKUP_PROMISC ||
|
|
lkup_type == ICE_SW_LKUP_PROMISC_VLAN)
|
|
type = remove ? ICE_AQC_SW_RULES_T_VSI_LIST_CLEAR :
|
|
ICE_AQC_SW_RULES_T_VSI_LIST_SET;
|
|
else if (lkup_type == ICE_SW_LKUP_VLAN)
|
|
type = remove ? ICE_AQC_SW_RULES_T_PRUNE_LIST_CLEAR :
|
|
ICE_AQC_SW_RULES_T_PRUNE_LIST_SET;
|
|
else
|
|
return ICE_ERR_PARAM;
|
|
|
|
s_rule_size = (u16)ICE_SW_RULE_VSI_LIST_SIZE(num_vsi);
|
|
s_rule = devm_kzalloc(ice_hw_to_dev(hw), s_rule_size, GFP_KERNEL);
|
|
if (!s_rule)
|
|
return ICE_ERR_NO_MEMORY;
|
|
for (i = 0; i < num_vsi; i++) {
|
|
if (!ice_is_vsi_valid(hw, vsi_handle_arr[i])) {
|
|
status = ICE_ERR_PARAM;
|
|
goto exit;
|
|
}
|
|
/* AQ call requires hw_vsi_id(s) */
|
|
s_rule->pdata.vsi_list.vsi[i] =
|
|
cpu_to_le16(ice_get_hw_vsi_num(hw, vsi_handle_arr[i]));
|
|
}
|
|
|
|
s_rule->type = cpu_to_le16(type);
|
|
s_rule->pdata.vsi_list.number_vsi = cpu_to_le16(num_vsi);
|
|
s_rule->pdata.vsi_list.index = cpu_to_le16(vsi_list_id);
|
|
|
|
status = ice_aq_sw_rules(hw, s_rule, s_rule_size, 1, opc, NULL);
|
|
|
|
exit:
|
|
devm_kfree(ice_hw_to_dev(hw), s_rule);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_create_vsi_list_rule - Creates and populates a VSI list rule
|
|
* @hw: pointer to the HW struct
|
|
* @vsi_handle_arr: array of VSI handles to form a VSI list
|
|
* @num_vsi: number of VSI handles in the array
|
|
* @vsi_list_id: stores the ID of the VSI list to be created
|
|
* @lkup_type: switch rule filter's lookup type
|
|
*/
|
|
static enum ice_status
|
|
ice_create_vsi_list_rule(struct ice_hw *hw, u16 *vsi_handle_arr, u16 num_vsi,
|
|
u16 *vsi_list_id, enum ice_sw_lkup_type lkup_type)
|
|
{
|
|
enum ice_status status;
|
|
|
|
status = ice_aq_alloc_free_vsi_list(hw, vsi_list_id, lkup_type,
|
|
ice_aqc_opc_alloc_res);
|
|
if (status)
|
|
return status;
|
|
|
|
/* Update the newly created VSI list to include the specified VSIs */
|
|
return ice_update_vsi_list_rule(hw, vsi_handle_arr, num_vsi,
|
|
*vsi_list_id, false,
|
|
ice_aqc_opc_add_sw_rules, lkup_type);
|
|
}
|
|
|
|
/**
|
|
* ice_create_pkt_fwd_rule
|
|
* @hw: pointer to the hardware structure
|
|
* @f_entry: entry containing packet forwarding information
|
|
*
|
|
* Create switch rule with given filter information and add an entry
|
|
* to the corresponding filter management list to track this switch rule
|
|
* and VSI mapping
|
|
*/
|
|
static enum ice_status
|
|
ice_create_pkt_fwd_rule(struct ice_hw *hw,
|
|
struct ice_fltr_list_entry *f_entry)
|
|
{
|
|
struct ice_fltr_mgmt_list_entry *fm_entry;
|
|
struct ice_aqc_sw_rules_elem *s_rule;
|
|
enum ice_sw_lkup_type l_type;
|
|
struct ice_sw_recipe *recp;
|
|
enum ice_status status;
|
|
|
|
s_rule = devm_kzalloc(ice_hw_to_dev(hw),
|
|
ICE_SW_RULE_RX_TX_ETH_HDR_SIZE, GFP_KERNEL);
|
|
if (!s_rule)
|
|
return ICE_ERR_NO_MEMORY;
|
|
fm_entry = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*fm_entry),
|
|
GFP_KERNEL);
|
|
if (!fm_entry) {
|
|
status = ICE_ERR_NO_MEMORY;
|
|
goto ice_create_pkt_fwd_rule_exit;
|
|
}
|
|
|
|
fm_entry->fltr_info = f_entry->fltr_info;
|
|
|
|
/* Initialize all the fields for the management entry */
|
|
fm_entry->vsi_count = 1;
|
|
fm_entry->lg_act_idx = ICE_INVAL_LG_ACT_INDEX;
|
|
fm_entry->sw_marker_id = ICE_INVAL_SW_MARKER_ID;
|
|
fm_entry->counter_index = ICE_INVAL_COUNTER_ID;
|
|
|
|
ice_fill_sw_rule(hw, &fm_entry->fltr_info, s_rule,
|
|
ice_aqc_opc_add_sw_rules);
|
|
|
|
status = ice_aq_sw_rules(hw, s_rule, ICE_SW_RULE_RX_TX_ETH_HDR_SIZE, 1,
|
|
ice_aqc_opc_add_sw_rules, NULL);
|
|
if (status) {
|
|
devm_kfree(ice_hw_to_dev(hw), fm_entry);
|
|
goto ice_create_pkt_fwd_rule_exit;
|
|
}
|
|
|
|
f_entry->fltr_info.fltr_rule_id =
|
|
le16_to_cpu(s_rule->pdata.lkup_tx_rx.index);
|
|
fm_entry->fltr_info.fltr_rule_id =
|
|
le16_to_cpu(s_rule->pdata.lkup_tx_rx.index);
|
|
|
|
/* The book keeping entries will get removed when base driver
|
|
* calls remove filter AQ command
|
|
*/
|
|
l_type = fm_entry->fltr_info.lkup_type;
|
|
recp = &hw->switch_info->recp_list[l_type];
|
|
list_add(&fm_entry->list_entry, &recp->filt_rules);
|
|
|
|
ice_create_pkt_fwd_rule_exit:
|
|
devm_kfree(ice_hw_to_dev(hw), s_rule);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_update_pkt_fwd_rule
|
|
* @hw: pointer to the hardware structure
|
|
* @f_info: filter information for switch rule
|
|
*
|
|
* Call AQ command to update a previously created switch rule with a
|
|
* VSI list ID
|
|
*/
|
|
static enum ice_status
|
|
ice_update_pkt_fwd_rule(struct ice_hw *hw, struct ice_fltr_info *f_info)
|
|
{
|
|
struct ice_aqc_sw_rules_elem *s_rule;
|
|
enum ice_status status;
|
|
|
|
s_rule = devm_kzalloc(ice_hw_to_dev(hw),
|
|
ICE_SW_RULE_RX_TX_ETH_HDR_SIZE, GFP_KERNEL);
|
|
if (!s_rule)
|
|
return ICE_ERR_NO_MEMORY;
|
|
|
|
ice_fill_sw_rule(hw, f_info, s_rule, ice_aqc_opc_update_sw_rules);
|
|
|
|
s_rule->pdata.lkup_tx_rx.index = cpu_to_le16(f_info->fltr_rule_id);
|
|
|
|
/* Update switch rule with new rule set to forward VSI list */
|
|
status = ice_aq_sw_rules(hw, s_rule, ICE_SW_RULE_RX_TX_ETH_HDR_SIZE, 1,
|
|
ice_aqc_opc_update_sw_rules, NULL);
|
|
|
|
devm_kfree(ice_hw_to_dev(hw), s_rule);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_update_sw_rule_bridge_mode
|
|
* @hw: pointer to the HW struct
|
|
*
|
|
* Updates unicast switch filter rules based on VEB/VEPA mode
|
|
*/
|
|
enum ice_status ice_update_sw_rule_bridge_mode(struct ice_hw *hw)
|
|
{
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
struct ice_fltr_mgmt_list_entry *fm_entry;
|
|
enum ice_status status = 0;
|
|
struct list_head *rule_head;
|
|
struct mutex *rule_lock; /* Lock to protect filter rule list */
|
|
|
|
rule_lock = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rule_lock;
|
|
rule_head = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rules;
|
|
|
|
mutex_lock(rule_lock);
|
|
list_for_each_entry(fm_entry, rule_head, list_entry) {
|
|
struct ice_fltr_info *fi = &fm_entry->fltr_info;
|
|
u8 *addr = fi->l_data.mac.mac_addr;
|
|
|
|
/* Update unicast Tx rules to reflect the selected
|
|
* VEB/VEPA mode
|
|
*/
|
|
if ((fi->flag & ICE_FLTR_TX) && is_unicast_ether_addr(addr) &&
|
|
(fi->fltr_act == ICE_FWD_TO_VSI ||
|
|
fi->fltr_act == ICE_FWD_TO_VSI_LIST ||
|
|
fi->fltr_act == ICE_FWD_TO_Q ||
|
|
fi->fltr_act == ICE_FWD_TO_QGRP)) {
|
|
status = ice_update_pkt_fwd_rule(hw, fi);
|
|
if (status)
|
|
break;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(rule_lock);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_add_update_vsi_list
|
|
* @hw: pointer to the hardware structure
|
|
* @m_entry: pointer to current filter management list entry
|
|
* @cur_fltr: filter information from the book keeping entry
|
|
* @new_fltr: filter information with the new VSI to be added
|
|
*
|
|
* Call AQ command to add or update previously created VSI list with new VSI.
|
|
*
|
|
* Helper function to do book keeping associated with adding filter information
|
|
* The algorithm to do the book keeping is described below :
|
|
* When a VSI needs to subscribe to a given filter (MAC/VLAN/Ethtype etc.)
|
|
* if only one VSI has been added till now
|
|
* Allocate a new VSI list and add two VSIs
|
|
* to this list using switch rule command
|
|
* Update the previously created switch rule with the
|
|
* newly created VSI list ID
|
|
* if a VSI list was previously created
|
|
* Add the new VSI to the previously created VSI list set
|
|
* using the update switch rule command
|
|
*/
|
|
static enum ice_status
|
|
ice_add_update_vsi_list(struct ice_hw *hw,
|
|
struct ice_fltr_mgmt_list_entry *m_entry,
|
|
struct ice_fltr_info *cur_fltr,
|
|
struct ice_fltr_info *new_fltr)
|
|
{
|
|
enum ice_status status = 0;
|
|
u16 vsi_list_id = 0;
|
|
|
|
if ((cur_fltr->fltr_act == ICE_FWD_TO_Q ||
|
|
cur_fltr->fltr_act == ICE_FWD_TO_QGRP))
|
|
return ICE_ERR_NOT_IMPL;
|
|
|
|
if ((new_fltr->fltr_act == ICE_FWD_TO_Q ||
|
|
new_fltr->fltr_act == ICE_FWD_TO_QGRP) &&
|
|
(cur_fltr->fltr_act == ICE_FWD_TO_VSI ||
|
|
cur_fltr->fltr_act == ICE_FWD_TO_VSI_LIST))
|
|
return ICE_ERR_NOT_IMPL;
|
|
|
|
if (m_entry->vsi_count < 2 && !m_entry->vsi_list_info) {
|
|
/* Only one entry existed in the mapping and it was not already
|
|
* a part of a VSI list. So, create a VSI list with the old and
|
|
* new VSIs.
|
|
*/
|
|
struct ice_fltr_info tmp_fltr;
|
|
u16 vsi_handle_arr[2];
|
|
|
|
/* A rule already exists with the new VSI being added */
|
|
if (cur_fltr->fwd_id.hw_vsi_id == new_fltr->fwd_id.hw_vsi_id)
|
|
return ICE_ERR_ALREADY_EXISTS;
|
|
|
|
vsi_handle_arr[0] = cur_fltr->vsi_handle;
|
|
vsi_handle_arr[1] = new_fltr->vsi_handle;
|
|
status = ice_create_vsi_list_rule(hw, &vsi_handle_arr[0], 2,
|
|
&vsi_list_id,
|
|
new_fltr->lkup_type);
|
|
if (status)
|
|
return status;
|
|
|
|
tmp_fltr = *new_fltr;
|
|
tmp_fltr.fltr_rule_id = cur_fltr->fltr_rule_id;
|
|
tmp_fltr.fltr_act = ICE_FWD_TO_VSI_LIST;
|
|
tmp_fltr.fwd_id.vsi_list_id = vsi_list_id;
|
|
/* Update the previous switch rule of "MAC forward to VSI" to
|
|
* "MAC fwd to VSI list"
|
|
*/
|
|
status = ice_update_pkt_fwd_rule(hw, &tmp_fltr);
|
|
if (status)
|
|
return status;
|
|
|
|
cur_fltr->fwd_id.vsi_list_id = vsi_list_id;
|
|
cur_fltr->fltr_act = ICE_FWD_TO_VSI_LIST;
|
|
m_entry->vsi_list_info =
|
|
ice_create_vsi_list_map(hw, &vsi_handle_arr[0], 2,
|
|
vsi_list_id);
|
|
|
|
/* If this entry was large action then the large action needs
|
|
* to be updated to point to FWD to VSI list
|
|
*/
|
|
if (m_entry->sw_marker_id != ICE_INVAL_SW_MARKER_ID)
|
|
status =
|
|
ice_add_marker_act(hw, m_entry,
|
|
m_entry->sw_marker_id,
|
|
m_entry->lg_act_idx);
|
|
} else {
|
|
u16 vsi_handle = new_fltr->vsi_handle;
|
|
enum ice_adminq_opc opcode;
|
|
|
|
if (!m_entry->vsi_list_info)
|
|
return ICE_ERR_CFG;
|
|
|
|
/* A rule already exists with the new VSI being added */
|
|
if (test_bit(vsi_handle, m_entry->vsi_list_info->vsi_map))
|
|
return 0;
|
|
|
|
/* Update the previously created VSI list set with
|
|
* the new VSI ID passed in
|
|
*/
|
|
vsi_list_id = cur_fltr->fwd_id.vsi_list_id;
|
|
opcode = ice_aqc_opc_update_sw_rules;
|
|
|
|
status = ice_update_vsi_list_rule(hw, &vsi_handle, 1,
|
|
vsi_list_id, false, opcode,
|
|
new_fltr->lkup_type);
|
|
/* update VSI list mapping info with new VSI ID */
|
|
if (!status)
|
|
set_bit(vsi_handle, m_entry->vsi_list_info->vsi_map);
|
|
}
|
|
if (!status)
|
|
m_entry->vsi_count++;
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_find_rule_entry - Search a rule entry
|
|
* @hw: pointer to the hardware structure
|
|
* @recp_id: lookup type for which the specified rule needs to be searched
|
|
* @f_info: rule information
|
|
*
|
|
* Helper function to search for a given rule entry
|
|
* Returns pointer to entry storing the rule if found
|
|
*/
|
|
static struct ice_fltr_mgmt_list_entry *
|
|
ice_find_rule_entry(struct ice_hw *hw, u8 recp_id, struct ice_fltr_info *f_info)
|
|
{
|
|
struct ice_fltr_mgmt_list_entry *list_itr, *ret = NULL;
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
struct list_head *list_head;
|
|
|
|
list_head = &sw->recp_list[recp_id].filt_rules;
|
|
list_for_each_entry(list_itr, list_head, list_entry) {
|
|
if (!memcmp(&f_info->l_data, &list_itr->fltr_info.l_data,
|
|
sizeof(f_info->l_data)) &&
|
|
f_info->flag == list_itr->fltr_info.flag) {
|
|
ret = list_itr;
|
|
break;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ice_find_vsi_list_entry - Search VSI list map with VSI count 1
|
|
* @hw: pointer to the hardware structure
|
|
* @recp_id: lookup type for which VSI lists needs to be searched
|
|
* @vsi_handle: VSI handle to be found in VSI list
|
|
* @vsi_list_id: VSI list ID found containing vsi_handle
|
|
*
|
|
* Helper function to search a VSI list with single entry containing given VSI
|
|
* handle element. This can be extended further to search VSI list with more
|
|
* than 1 vsi_count. Returns pointer to VSI list entry if found.
|
|
*/
|
|
static struct ice_vsi_list_map_info *
|
|
ice_find_vsi_list_entry(struct ice_hw *hw, u8 recp_id, u16 vsi_handle,
|
|
u16 *vsi_list_id)
|
|
{
|
|
struct ice_vsi_list_map_info *map_info = NULL;
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
struct ice_fltr_mgmt_list_entry *list_itr;
|
|
struct list_head *list_head;
|
|
|
|
list_head = &sw->recp_list[recp_id].filt_rules;
|
|
list_for_each_entry(list_itr, list_head, list_entry) {
|
|
if (list_itr->vsi_count == 1 && list_itr->vsi_list_info) {
|
|
map_info = list_itr->vsi_list_info;
|
|
if (test_bit(vsi_handle, map_info->vsi_map)) {
|
|
*vsi_list_id = map_info->vsi_list_id;
|
|
return map_info;
|
|
}
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* ice_add_rule_internal - add rule for a given lookup type
|
|
* @hw: pointer to the hardware structure
|
|
* @recp_id: lookup type (recipe ID) for which rule has to be added
|
|
* @f_entry: structure containing MAC forwarding information
|
|
*
|
|
* Adds or updates the rule lists for a given recipe
|
|
*/
|
|
static enum ice_status
|
|
ice_add_rule_internal(struct ice_hw *hw, u8 recp_id,
|
|
struct ice_fltr_list_entry *f_entry)
|
|
{
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
struct ice_fltr_info *new_fltr, *cur_fltr;
|
|
struct ice_fltr_mgmt_list_entry *m_entry;
|
|
struct mutex *rule_lock; /* Lock to protect filter rule list */
|
|
enum ice_status status = 0;
|
|
|
|
if (!ice_is_vsi_valid(hw, f_entry->fltr_info.vsi_handle))
|
|
return ICE_ERR_PARAM;
|
|
f_entry->fltr_info.fwd_id.hw_vsi_id =
|
|
ice_get_hw_vsi_num(hw, f_entry->fltr_info.vsi_handle);
|
|
|
|
rule_lock = &sw->recp_list[recp_id].filt_rule_lock;
|
|
|
|
mutex_lock(rule_lock);
|
|
new_fltr = &f_entry->fltr_info;
|
|
if (new_fltr->flag & ICE_FLTR_RX)
|
|
new_fltr->src = hw->port_info->lport;
|
|
else if (new_fltr->flag & ICE_FLTR_TX)
|
|
new_fltr->src = f_entry->fltr_info.fwd_id.hw_vsi_id;
|
|
|
|
m_entry = ice_find_rule_entry(hw, recp_id, new_fltr);
|
|
if (!m_entry) {
|
|
mutex_unlock(rule_lock);
|
|
return ice_create_pkt_fwd_rule(hw, f_entry);
|
|
}
|
|
|
|
cur_fltr = &m_entry->fltr_info;
|
|
status = ice_add_update_vsi_list(hw, m_entry, cur_fltr, new_fltr);
|
|
mutex_unlock(rule_lock);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_remove_vsi_list_rule
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_list_id: VSI list ID generated as part of allocate resource
|
|
* @lkup_type: switch rule filter lookup type
|
|
*
|
|
* The VSI list should be emptied before this function is called to remove the
|
|
* VSI list.
|
|
*/
|
|
static enum ice_status
|
|
ice_remove_vsi_list_rule(struct ice_hw *hw, u16 vsi_list_id,
|
|
enum ice_sw_lkup_type lkup_type)
|
|
{
|
|
struct ice_aqc_sw_rules_elem *s_rule;
|
|
enum ice_status status;
|
|
u16 s_rule_size;
|
|
|
|
s_rule_size = (u16)ICE_SW_RULE_VSI_LIST_SIZE(0);
|
|
s_rule = devm_kzalloc(ice_hw_to_dev(hw), s_rule_size, GFP_KERNEL);
|
|
if (!s_rule)
|
|
return ICE_ERR_NO_MEMORY;
|
|
|
|
s_rule->type = cpu_to_le16(ICE_AQC_SW_RULES_T_VSI_LIST_CLEAR);
|
|
s_rule->pdata.vsi_list.index = cpu_to_le16(vsi_list_id);
|
|
|
|
/* Free the vsi_list resource that we allocated. It is assumed that the
|
|
* list is empty at this point.
|
|
*/
|
|
status = ice_aq_alloc_free_vsi_list(hw, &vsi_list_id, lkup_type,
|
|
ice_aqc_opc_free_res);
|
|
|
|
devm_kfree(ice_hw_to_dev(hw), s_rule);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_rem_update_vsi_list
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: VSI handle of the VSI to remove
|
|
* @fm_list: filter management entry for which the VSI list management needs to
|
|
* be done
|
|
*/
|
|
static enum ice_status
|
|
ice_rem_update_vsi_list(struct ice_hw *hw, u16 vsi_handle,
|
|
struct ice_fltr_mgmt_list_entry *fm_list)
|
|
{
|
|
enum ice_sw_lkup_type lkup_type;
|
|
enum ice_status status = 0;
|
|
u16 vsi_list_id;
|
|
|
|
if (fm_list->fltr_info.fltr_act != ICE_FWD_TO_VSI_LIST ||
|
|
fm_list->vsi_count == 0)
|
|
return ICE_ERR_PARAM;
|
|
|
|
/* A rule with the VSI being removed does not exist */
|
|
if (!test_bit(vsi_handle, fm_list->vsi_list_info->vsi_map))
|
|
return ICE_ERR_DOES_NOT_EXIST;
|
|
|
|
lkup_type = fm_list->fltr_info.lkup_type;
|
|
vsi_list_id = fm_list->fltr_info.fwd_id.vsi_list_id;
|
|
status = ice_update_vsi_list_rule(hw, &vsi_handle, 1, vsi_list_id, true,
|
|
ice_aqc_opc_update_sw_rules,
|
|
lkup_type);
|
|
if (status)
|
|
return status;
|
|
|
|
fm_list->vsi_count--;
|
|
clear_bit(vsi_handle, fm_list->vsi_list_info->vsi_map);
|
|
|
|
if (fm_list->vsi_count == 1 && lkup_type != ICE_SW_LKUP_VLAN) {
|
|
struct ice_fltr_info tmp_fltr_info = fm_list->fltr_info;
|
|
struct ice_vsi_list_map_info *vsi_list_info =
|
|
fm_list->vsi_list_info;
|
|
u16 rem_vsi_handle;
|
|
|
|
rem_vsi_handle = find_first_bit(vsi_list_info->vsi_map,
|
|
ICE_MAX_VSI);
|
|
if (!ice_is_vsi_valid(hw, rem_vsi_handle))
|
|
return ICE_ERR_OUT_OF_RANGE;
|
|
|
|
/* Make sure VSI list is empty before removing it below */
|
|
status = ice_update_vsi_list_rule(hw, &rem_vsi_handle, 1,
|
|
vsi_list_id, true,
|
|
ice_aqc_opc_update_sw_rules,
|
|
lkup_type);
|
|
if (status)
|
|
return status;
|
|
|
|
tmp_fltr_info.fltr_act = ICE_FWD_TO_VSI;
|
|
tmp_fltr_info.fwd_id.hw_vsi_id =
|
|
ice_get_hw_vsi_num(hw, rem_vsi_handle);
|
|
tmp_fltr_info.vsi_handle = rem_vsi_handle;
|
|
status = ice_update_pkt_fwd_rule(hw, &tmp_fltr_info);
|
|
if (status) {
|
|
ice_debug(hw, ICE_DBG_SW,
|
|
"Failed to update pkt fwd rule to FWD_TO_VSI on HW VSI %d, error %d\n",
|
|
tmp_fltr_info.fwd_id.hw_vsi_id, status);
|
|
return status;
|
|
}
|
|
|
|
fm_list->fltr_info = tmp_fltr_info;
|
|
}
|
|
|
|
if ((fm_list->vsi_count == 1 && lkup_type != ICE_SW_LKUP_VLAN) ||
|
|
(fm_list->vsi_count == 0 && lkup_type == ICE_SW_LKUP_VLAN)) {
|
|
struct ice_vsi_list_map_info *vsi_list_info =
|
|
fm_list->vsi_list_info;
|
|
|
|
/* Remove the VSI list since it is no longer used */
|
|
status = ice_remove_vsi_list_rule(hw, vsi_list_id, lkup_type);
|
|
if (status) {
|
|
ice_debug(hw, ICE_DBG_SW,
|
|
"Failed to remove VSI list %d, error %d\n",
|
|
vsi_list_id, status);
|
|
return status;
|
|
}
|
|
|
|
list_del(&vsi_list_info->list_entry);
|
|
devm_kfree(ice_hw_to_dev(hw), vsi_list_info);
|
|
fm_list->vsi_list_info = NULL;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_remove_rule_internal - Remove a filter rule of a given type
|
|
* @hw: pointer to the hardware structure
|
|
* @recp_id: recipe ID for which the rule needs to removed
|
|
* @f_entry: rule entry containing filter information
|
|
*/
|
|
static enum ice_status
|
|
ice_remove_rule_internal(struct ice_hw *hw, u8 recp_id,
|
|
struct ice_fltr_list_entry *f_entry)
|
|
{
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
struct ice_fltr_mgmt_list_entry *list_elem;
|
|
struct mutex *rule_lock; /* Lock to protect filter rule list */
|
|
enum ice_status status = 0;
|
|
bool remove_rule = false;
|
|
u16 vsi_handle;
|
|
|
|
if (!ice_is_vsi_valid(hw, f_entry->fltr_info.vsi_handle))
|
|
return ICE_ERR_PARAM;
|
|
f_entry->fltr_info.fwd_id.hw_vsi_id =
|
|
ice_get_hw_vsi_num(hw, f_entry->fltr_info.vsi_handle);
|
|
|
|
rule_lock = &sw->recp_list[recp_id].filt_rule_lock;
|
|
mutex_lock(rule_lock);
|
|
list_elem = ice_find_rule_entry(hw, recp_id, &f_entry->fltr_info);
|
|
if (!list_elem) {
|
|
status = ICE_ERR_DOES_NOT_EXIST;
|
|
goto exit;
|
|
}
|
|
|
|
if (list_elem->fltr_info.fltr_act != ICE_FWD_TO_VSI_LIST) {
|
|
remove_rule = true;
|
|
} else if (!list_elem->vsi_list_info) {
|
|
status = ICE_ERR_DOES_NOT_EXIST;
|
|
goto exit;
|
|
} else if (list_elem->vsi_list_info->ref_cnt > 1) {
|
|
/* a ref_cnt > 1 indicates that the vsi_list is being
|
|
* shared by multiple rules. Decrement the ref_cnt and
|
|
* remove this rule, but do not modify the list, as it
|
|
* is in-use by other rules.
|
|
*/
|
|
list_elem->vsi_list_info->ref_cnt--;
|
|
remove_rule = true;
|
|
} else {
|
|
/* a ref_cnt of 1 indicates the vsi_list is only used
|
|
* by one rule. However, the original removal request is only
|
|
* for a single VSI. Update the vsi_list first, and only
|
|
* remove the rule if there are no further VSIs in this list.
|
|
*/
|
|
vsi_handle = f_entry->fltr_info.vsi_handle;
|
|
status = ice_rem_update_vsi_list(hw, vsi_handle, list_elem);
|
|
if (status)
|
|
goto exit;
|
|
/* if VSI count goes to zero after updating the VSI list */
|
|
if (list_elem->vsi_count == 0)
|
|
remove_rule = true;
|
|
}
|
|
|
|
if (remove_rule) {
|
|
/* Remove the lookup rule */
|
|
struct ice_aqc_sw_rules_elem *s_rule;
|
|
|
|
s_rule = devm_kzalloc(ice_hw_to_dev(hw),
|
|
ICE_SW_RULE_RX_TX_NO_HDR_SIZE,
|
|
GFP_KERNEL);
|
|
if (!s_rule) {
|
|
status = ICE_ERR_NO_MEMORY;
|
|
goto exit;
|
|
}
|
|
|
|
ice_fill_sw_rule(hw, &list_elem->fltr_info, s_rule,
|
|
ice_aqc_opc_remove_sw_rules);
|
|
|
|
status = ice_aq_sw_rules(hw, s_rule,
|
|
ICE_SW_RULE_RX_TX_NO_HDR_SIZE, 1,
|
|
ice_aqc_opc_remove_sw_rules, NULL);
|
|
if (status)
|
|
goto exit;
|
|
|
|
/* Remove a book keeping from the list */
|
|
devm_kfree(ice_hw_to_dev(hw), s_rule);
|
|
|
|
list_del(&list_elem->list_entry);
|
|
devm_kfree(ice_hw_to_dev(hw), list_elem);
|
|
}
|
|
exit:
|
|
mutex_unlock(rule_lock);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_add_mac - Add a MAC address based filter rule
|
|
* @hw: pointer to the hardware structure
|
|
* @m_list: list of MAC addresses and forwarding information
|
|
*
|
|
* IMPORTANT: When the ucast_shared flag is set to false and m_list has
|
|
* multiple unicast addresses, the function assumes that all the
|
|
* addresses are unique in a given add_mac call. It doesn't
|
|
* check for duplicates in this case, removing duplicates from a given
|
|
* list should be taken care of in the caller of this function.
|
|
*/
|
|
enum ice_status
|
|
ice_add_mac(struct ice_hw *hw, struct list_head *m_list)
|
|
{
|
|
struct ice_aqc_sw_rules_elem *s_rule, *r_iter;
|
|
struct ice_fltr_list_entry *m_list_itr;
|
|
struct list_head *rule_head;
|
|
u16 elem_sent, total_elem_left;
|
|
struct ice_switch_info *sw;
|
|
struct mutex *rule_lock; /* Lock to protect filter rule list */
|
|
enum ice_status status = 0;
|
|
u16 num_unicast = 0;
|
|
u16 s_rule_size;
|
|
|
|
if (!m_list || !hw)
|
|
return ICE_ERR_PARAM;
|
|
|
|
s_rule = NULL;
|
|
sw = hw->switch_info;
|
|
rule_lock = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rule_lock;
|
|
list_for_each_entry(m_list_itr, m_list, list_entry) {
|
|
u8 *add = &m_list_itr->fltr_info.l_data.mac.mac_addr[0];
|
|
u16 vsi_handle;
|
|
u16 hw_vsi_id;
|
|
|
|
m_list_itr->fltr_info.flag = ICE_FLTR_TX;
|
|
vsi_handle = m_list_itr->fltr_info.vsi_handle;
|
|
if (!ice_is_vsi_valid(hw, vsi_handle))
|
|
return ICE_ERR_PARAM;
|
|
hw_vsi_id = ice_get_hw_vsi_num(hw, vsi_handle);
|
|
m_list_itr->fltr_info.fwd_id.hw_vsi_id = hw_vsi_id;
|
|
/* update the src in case it is VSI num */
|
|
if (m_list_itr->fltr_info.src_id != ICE_SRC_ID_VSI)
|
|
return ICE_ERR_PARAM;
|
|
m_list_itr->fltr_info.src = hw_vsi_id;
|
|
if (m_list_itr->fltr_info.lkup_type != ICE_SW_LKUP_MAC ||
|
|
is_zero_ether_addr(add))
|
|
return ICE_ERR_PARAM;
|
|
if (is_unicast_ether_addr(add) && !hw->ucast_shared) {
|
|
/* Don't overwrite the unicast address */
|
|
mutex_lock(rule_lock);
|
|
if (ice_find_rule_entry(hw, ICE_SW_LKUP_MAC,
|
|
&m_list_itr->fltr_info)) {
|
|
mutex_unlock(rule_lock);
|
|
return ICE_ERR_ALREADY_EXISTS;
|
|
}
|
|
mutex_unlock(rule_lock);
|
|
num_unicast++;
|
|
} else if (is_multicast_ether_addr(add) ||
|
|
(is_unicast_ether_addr(add) && hw->ucast_shared)) {
|
|
m_list_itr->status =
|
|
ice_add_rule_internal(hw, ICE_SW_LKUP_MAC,
|
|
m_list_itr);
|
|
if (m_list_itr->status)
|
|
return m_list_itr->status;
|
|
}
|
|
}
|
|
|
|
mutex_lock(rule_lock);
|
|
/* Exit if no suitable entries were found for adding bulk switch rule */
|
|
if (!num_unicast) {
|
|
status = 0;
|
|
goto ice_add_mac_exit;
|
|
}
|
|
|
|
rule_head = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rules;
|
|
|
|
/* Allocate switch rule buffer for the bulk update for unicast */
|
|
s_rule_size = ICE_SW_RULE_RX_TX_ETH_HDR_SIZE;
|
|
s_rule = devm_kcalloc(ice_hw_to_dev(hw), num_unicast, s_rule_size,
|
|
GFP_KERNEL);
|
|
if (!s_rule) {
|
|
status = ICE_ERR_NO_MEMORY;
|
|
goto ice_add_mac_exit;
|
|
}
|
|
|
|
r_iter = s_rule;
|
|
list_for_each_entry(m_list_itr, m_list, list_entry) {
|
|
struct ice_fltr_info *f_info = &m_list_itr->fltr_info;
|
|
u8 *mac_addr = &f_info->l_data.mac.mac_addr[0];
|
|
|
|
if (is_unicast_ether_addr(mac_addr)) {
|
|
ice_fill_sw_rule(hw, &m_list_itr->fltr_info, r_iter,
|
|
ice_aqc_opc_add_sw_rules);
|
|
r_iter = (struct ice_aqc_sw_rules_elem *)
|
|
((u8 *)r_iter + s_rule_size);
|
|
}
|
|
}
|
|
|
|
/* Call AQ bulk switch rule update for all unicast addresses */
|
|
r_iter = s_rule;
|
|
/* Call AQ switch rule in AQ_MAX chunk */
|
|
for (total_elem_left = num_unicast; total_elem_left > 0;
|
|
total_elem_left -= elem_sent) {
|
|
struct ice_aqc_sw_rules_elem *entry = r_iter;
|
|
|
|
elem_sent = min(total_elem_left,
|
|
(u16)(ICE_AQ_MAX_BUF_LEN / s_rule_size));
|
|
status = ice_aq_sw_rules(hw, entry, elem_sent * s_rule_size,
|
|
elem_sent, ice_aqc_opc_add_sw_rules,
|
|
NULL);
|
|
if (status)
|
|
goto ice_add_mac_exit;
|
|
r_iter = (struct ice_aqc_sw_rules_elem *)
|
|
((u8 *)r_iter + (elem_sent * s_rule_size));
|
|
}
|
|
|
|
/* Fill up rule ID based on the value returned from FW */
|
|
r_iter = s_rule;
|
|
list_for_each_entry(m_list_itr, m_list, list_entry) {
|
|
struct ice_fltr_info *f_info = &m_list_itr->fltr_info;
|
|
u8 *mac_addr = &f_info->l_data.mac.mac_addr[0];
|
|
struct ice_fltr_mgmt_list_entry *fm_entry;
|
|
|
|
if (is_unicast_ether_addr(mac_addr)) {
|
|
f_info->fltr_rule_id =
|
|
le16_to_cpu(r_iter->pdata.lkup_tx_rx.index);
|
|
f_info->fltr_act = ICE_FWD_TO_VSI;
|
|
/* Create an entry to track this MAC address */
|
|
fm_entry = devm_kzalloc(ice_hw_to_dev(hw),
|
|
sizeof(*fm_entry), GFP_KERNEL);
|
|
if (!fm_entry) {
|
|
status = ICE_ERR_NO_MEMORY;
|
|
goto ice_add_mac_exit;
|
|
}
|
|
fm_entry->fltr_info = *f_info;
|
|
fm_entry->vsi_count = 1;
|
|
/* The book keeping entries will get removed when
|
|
* base driver calls remove filter AQ command
|
|
*/
|
|
|
|
list_add(&fm_entry->list_entry, rule_head);
|
|
r_iter = (struct ice_aqc_sw_rules_elem *)
|
|
((u8 *)r_iter + s_rule_size);
|
|
}
|
|
}
|
|
|
|
ice_add_mac_exit:
|
|
mutex_unlock(rule_lock);
|
|
if (s_rule)
|
|
devm_kfree(ice_hw_to_dev(hw), s_rule);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_add_vlan_internal - Add one VLAN based filter rule
|
|
* @hw: pointer to the hardware structure
|
|
* @f_entry: filter entry containing one VLAN information
|
|
*/
|
|
static enum ice_status
|
|
ice_add_vlan_internal(struct ice_hw *hw, struct ice_fltr_list_entry *f_entry)
|
|
{
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
struct ice_fltr_mgmt_list_entry *v_list_itr;
|
|
struct ice_fltr_info *new_fltr, *cur_fltr;
|
|
enum ice_sw_lkup_type lkup_type;
|
|
u16 vsi_list_id = 0, vsi_handle;
|
|
struct mutex *rule_lock; /* Lock to protect filter rule list */
|
|
enum ice_status status = 0;
|
|
|
|
if (!ice_is_vsi_valid(hw, f_entry->fltr_info.vsi_handle))
|
|
return ICE_ERR_PARAM;
|
|
|
|
f_entry->fltr_info.fwd_id.hw_vsi_id =
|
|
ice_get_hw_vsi_num(hw, f_entry->fltr_info.vsi_handle);
|
|
new_fltr = &f_entry->fltr_info;
|
|
|
|
/* VLAN ID should only be 12 bits */
|
|
if (new_fltr->l_data.vlan.vlan_id > ICE_MAX_VLAN_ID)
|
|
return ICE_ERR_PARAM;
|
|
|
|
if (new_fltr->src_id != ICE_SRC_ID_VSI)
|
|
return ICE_ERR_PARAM;
|
|
|
|
new_fltr->src = new_fltr->fwd_id.hw_vsi_id;
|
|
lkup_type = new_fltr->lkup_type;
|
|
vsi_handle = new_fltr->vsi_handle;
|
|
rule_lock = &sw->recp_list[ICE_SW_LKUP_VLAN].filt_rule_lock;
|
|
mutex_lock(rule_lock);
|
|
v_list_itr = ice_find_rule_entry(hw, ICE_SW_LKUP_VLAN, new_fltr);
|
|
if (!v_list_itr) {
|
|
struct ice_vsi_list_map_info *map_info = NULL;
|
|
|
|
if (new_fltr->fltr_act == ICE_FWD_TO_VSI) {
|
|
/* All VLAN pruning rules use a VSI list. Check if
|
|
* there is already a VSI list containing VSI that we
|
|
* want to add. If found, use the same vsi_list_id for
|
|
* this new VLAN rule or else create a new list.
|
|
*/
|
|
map_info = ice_find_vsi_list_entry(hw, ICE_SW_LKUP_VLAN,
|
|
vsi_handle,
|
|
&vsi_list_id);
|
|
if (!map_info) {
|
|
status = ice_create_vsi_list_rule(hw,
|
|
&vsi_handle,
|
|
1,
|
|
&vsi_list_id,
|
|
lkup_type);
|
|
if (status)
|
|
goto exit;
|
|
}
|
|
/* Convert the action to forwarding to a VSI list. */
|
|
new_fltr->fltr_act = ICE_FWD_TO_VSI_LIST;
|
|
new_fltr->fwd_id.vsi_list_id = vsi_list_id;
|
|
}
|
|
|
|
status = ice_create_pkt_fwd_rule(hw, f_entry);
|
|
if (!status) {
|
|
v_list_itr = ice_find_rule_entry(hw, ICE_SW_LKUP_VLAN,
|
|
new_fltr);
|
|
if (!v_list_itr) {
|
|
status = ICE_ERR_DOES_NOT_EXIST;
|
|
goto exit;
|
|
}
|
|
/* reuse VSI list for new rule and increment ref_cnt */
|
|
if (map_info) {
|
|
v_list_itr->vsi_list_info = map_info;
|
|
map_info->ref_cnt++;
|
|
} else {
|
|
v_list_itr->vsi_list_info =
|
|
ice_create_vsi_list_map(hw, &vsi_handle,
|
|
1, vsi_list_id);
|
|
}
|
|
}
|
|
} else if (v_list_itr->vsi_list_info->ref_cnt == 1) {
|
|
/* Update existing VSI list to add new VSI ID only if it used
|
|
* by one VLAN rule.
|
|
*/
|
|
cur_fltr = &v_list_itr->fltr_info;
|
|
status = ice_add_update_vsi_list(hw, v_list_itr, cur_fltr,
|
|
new_fltr);
|
|
} else {
|
|
/* If VLAN rule exists and VSI list being used by this rule is
|
|
* referenced by more than 1 VLAN rule. Then create a new VSI
|
|
* list appending previous VSI with new VSI and update existing
|
|
* VLAN rule to point to new VSI list ID
|
|
*/
|
|
struct ice_fltr_info tmp_fltr;
|
|
u16 vsi_handle_arr[2];
|
|
u16 cur_handle;
|
|
|
|
/* Current implementation only supports reusing VSI list with
|
|
* one VSI count. We should never hit below condition
|
|
*/
|
|
if (v_list_itr->vsi_count > 1 &&
|
|
v_list_itr->vsi_list_info->ref_cnt > 1) {
|
|
ice_debug(hw, ICE_DBG_SW,
|
|
"Invalid configuration: Optimization to reuse VSI list with more than one VSI is not being done yet\n");
|
|
status = ICE_ERR_CFG;
|
|
goto exit;
|
|
}
|
|
|
|
cur_handle =
|
|
find_first_bit(v_list_itr->vsi_list_info->vsi_map,
|
|
ICE_MAX_VSI);
|
|
|
|
/* A rule already exists with the new VSI being added */
|
|
if (cur_handle == vsi_handle) {
|
|
status = ICE_ERR_ALREADY_EXISTS;
|
|
goto exit;
|
|
}
|
|
|
|
vsi_handle_arr[0] = cur_handle;
|
|
vsi_handle_arr[1] = vsi_handle;
|
|
status = ice_create_vsi_list_rule(hw, &vsi_handle_arr[0], 2,
|
|
&vsi_list_id, lkup_type);
|
|
if (status)
|
|
goto exit;
|
|
|
|
tmp_fltr = v_list_itr->fltr_info;
|
|
tmp_fltr.fltr_rule_id = v_list_itr->fltr_info.fltr_rule_id;
|
|
tmp_fltr.fwd_id.vsi_list_id = vsi_list_id;
|
|
tmp_fltr.fltr_act = ICE_FWD_TO_VSI_LIST;
|
|
/* Update the previous switch rule to a new VSI list which
|
|
* includes current VSI that is requested
|
|
*/
|
|
status = ice_update_pkt_fwd_rule(hw, &tmp_fltr);
|
|
if (status)
|
|
goto exit;
|
|
|
|
/* before overriding VSI list map info. decrement ref_cnt of
|
|
* previous VSI list
|
|
*/
|
|
v_list_itr->vsi_list_info->ref_cnt--;
|
|
|
|
/* now update to newly created list */
|
|
v_list_itr->fltr_info.fwd_id.vsi_list_id = vsi_list_id;
|
|
v_list_itr->vsi_list_info =
|
|
ice_create_vsi_list_map(hw, &vsi_handle_arr[0], 2,
|
|
vsi_list_id);
|
|
v_list_itr->vsi_count++;
|
|
}
|
|
|
|
exit:
|
|
mutex_unlock(rule_lock);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_add_vlan - Add VLAN based filter rule
|
|
* @hw: pointer to the hardware structure
|
|
* @v_list: list of VLAN entries and forwarding information
|
|
*/
|
|
enum ice_status
|
|
ice_add_vlan(struct ice_hw *hw, struct list_head *v_list)
|
|
{
|
|
struct ice_fltr_list_entry *v_list_itr;
|
|
|
|
if (!v_list || !hw)
|
|
return ICE_ERR_PARAM;
|
|
|
|
list_for_each_entry(v_list_itr, v_list, list_entry) {
|
|
if (v_list_itr->fltr_info.lkup_type != ICE_SW_LKUP_VLAN)
|
|
return ICE_ERR_PARAM;
|
|
v_list_itr->fltr_info.flag = ICE_FLTR_TX;
|
|
v_list_itr->status = ice_add_vlan_internal(hw, v_list_itr);
|
|
if (v_list_itr->status)
|
|
return v_list_itr->status;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ice_add_eth_mac - Add ethertype and MAC based filter rule
|
|
* @hw: pointer to the hardware structure
|
|
* @em_list: list of ether type MAC filter, MAC is optional
|
|
*
|
|
* This function requires the caller to populate the entries in
|
|
* the filter list with the necessary fields (including flags to
|
|
* indicate Tx or Rx rules).
|
|
*/
|
|
enum ice_status
|
|
ice_add_eth_mac(struct ice_hw *hw, struct list_head *em_list)
|
|
{
|
|
struct ice_fltr_list_entry *em_list_itr;
|
|
|
|
if (!em_list || !hw)
|
|
return ICE_ERR_PARAM;
|
|
|
|
list_for_each_entry(em_list_itr, em_list, list_entry) {
|
|
enum ice_sw_lkup_type l_type =
|
|
em_list_itr->fltr_info.lkup_type;
|
|
|
|
if (l_type != ICE_SW_LKUP_ETHERTYPE_MAC &&
|
|
l_type != ICE_SW_LKUP_ETHERTYPE)
|
|
return ICE_ERR_PARAM;
|
|
|
|
em_list_itr->status = ice_add_rule_internal(hw, l_type,
|
|
em_list_itr);
|
|
if (em_list_itr->status)
|
|
return em_list_itr->status;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ice_remove_eth_mac - Remove an ethertype (or MAC) based filter rule
|
|
* @hw: pointer to the hardware structure
|
|
* @em_list: list of ethertype or ethertype MAC entries
|
|
*/
|
|
enum ice_status
|
|
ice_remove_eth_mac(struct ice_hw *hw, struct list_head *em_list)
|
|
{
|
|
struct ice_fltr_list_entry *em_list_itr, *tmp;
|
|
|
|
if (!em_list || !hw)
|
|
return ICE_ERR_PARAM;
|
|
|
|
list_for_each_entry_safe(em_list_itr, tmp, em_list, list_entry) {
|
|
enum ice_sw_lkup_type l_type =
|
|
em_list_itr->fltr_info.lkup_type;
|
|
|
|
if (l_type != ICE_SW_LKUP_ETHERTYPE_MAC &&
|
|
l_type != ICE_SW_LKUP_ETHERTYPE)
|
|
return ICE_ERR_PARAM;
|
|
|
|
em_list_itr->status = ice_remove_rule_internal(hw, l_type,
|
|
em_list_itr);
|
|
if (em_list_itr->status)
|
|
return em_list_itr->status;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ice_rem_sw_rule_info
|
|
* @hw: pointer to the hardware structure
|
|
* @rule_head: pointer to the switch list structure that we want to delete
|
|
*/
|
|
static void
|
|
ice_rem_sw_rule_info(struct ice_hw *hw, struct list_head *rule_head)
|
|
{
|
|
if (!list_empty(rule_head)) {
|
|
struct ice_fltr_mgmt_list_entry *entry;
|
|
struct ice_fltr_mgmt_list_entry *tmp;
|
|
|
|
list_for_each_entry_safe(entry, tmp, rule_head, list_entry) {
|
|
list_del(&entry->list_entry);
|
|
devm_kfree(ice_hw_to_dev(hw), entry);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ice_cfg_dflt_vsi - change state of VSI to set/clear default
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: VSI handle to set as default
|
|
* @set: true to add the above mentioned switch rule, false to remove it
|
|
* @direction: ICE_FLTR_RX or ICE_FLTR_TX
|
|
*
|
|
* add filter rule to set/unset given VSI as default VSI for the switch
|
|
* (represented by swid)
|
|
*/
|
|
enum ice_status
|
|
ice_cfg_dflt_vsi(struct ice_hw *hw, u16 vsi_handle, bool set, u8 direction)
|
|
{
|
|
struct ice_aqc_sw_rules_elem *s_rule;
|
|
struct ice_fltr_info f_info;
|
|
enum ice_adminq_opc opcode;
|
|
enum ice_status status;
|
|
u16 s_rule_size;
|
|
u16 hw_vsi_id;
|
|
|
|
if (!ice_is_vsi_valid(hw, vsi_handle))
|
|
return ICE_ERR_PARAM;
|
|
hw_vsi_id = ice_get_hw_vsi_num(hw, vsi_handle);
|
|
|
|
s_rule_size = set ? ICE_SW_RULE_RX_TX_ETH_HDR_SIZE :
|
|
ICE_SW_RULE_RX_TX_NO_HDR_SIZE;
|
|
s_rule = devm_kzalloc(ice_hw_to_dev(hw), s_rule_size, GFP_KERNEL);
|
|
if (!s_rule)
|
|
return ICE_ERR_NO_MEMORY;
|
|
|
|
memset(&f_info, 0, sizeof(f_info));
|
|
|
|
f_info.lkup_type = ICE_SW_LKUP_DFLT;
|
|
f_info.flag = direction;
|
|
f_info.fltr_act = ICE_FWD_TO_VSI;
|
|
f_info.fwd_id.hw_vsi_id = hw_vsi_id;
|
|
|
|
if (f_info.flag & ICE_FLTR_RX) {
|
|
f_info.src = hw->port_info->lport;
|
|
f_info.src_id = ICE_SRC_ID_LPORT;
|
|
if (!set)
|
|
f_info.fltr_rule_id =
|
|
hw->port_info->dflt_rx_vsi_rule_id;
|
|
} else if (f_info.flag & ICE_FLTR_TX) {
|
|
f_info.src_id = ICE_SRC_ID_VSI;
|
|
f_info.src = hw_vsi_id;
|
|
if (!set)
|
|
f_info.fltr_rule_id =
|
|
hw->port_info->dflt_tx_vsi_rule_id;
|
|
}
|
|
|
|
if (set)
|
|
opcode = ice_aqc_opc_add_sw_rules;
|
|
else
|
|
opcode = ice_aqc_opc_remove_sw_rules;
|
|
|
|
ice_fill_sw_rule(hw, &f_info, s_rule, opcode);
|
|
|
|
status = ice_aq_sw_rules(hw, s_rule, s_rule_size, 1, opcode, NULL);
|
|
if (status || !(f_info.flag & ICE_FLTR_TX_RX))
|
|
goto out;
|
|
if (set) {
|
|
u16 index = le16_to_cpu(s_rule->pdata.lkup_tx_rx.index);
|
|
|
|
if (f_info.flag & ICE_FLTR_TX) {
|
|
hw->port_info->dflt_tx_vsi_num = hw_vsi_id;
|
|
hw->port_info->dflt_tx_vsi_rule_id = index;
|
|
} else if (f_info.flag & ICE_FLTR_RX) {
|
|
hw->port_info->dflt_rx_vsi_num = hw_vsi_id;
|
|
hw->port_info->dflt_rx_vsi_rule_id = index;
|
|
}
|
|
} else {
|
|
if (f_info.flag & ICE_FLTR_TX) {
|
|
hw->port_info->dflt_tx_vsi_num = ICE_DFLT_VSI_INVAL;
|
|
hw->port_info->dflt_tx_vsi_rule_id = ICE_INVAL_ACT;
|
|
} else if (f_info.flag & ICE_FLTR_RX) {
|
|
hw->port_info->dflt_rx_vsi_num = ICE_DFLT_VSI_INVAL;
|
|
hw->port_info->dflt_rx_vsi_rule_id = ICE_INVAL_ACT;
|
|
}
|
|
}
|
|
|
|
out:
|
|
devm_kfree(ice_hw_to_dev(hw), s_rule);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_remove_mac - remove a MAC address based filter rule
|
|
* @hw: pointer to the hardware structure
|
|
* @m_list: list of MAC addresses and forwarding information
|
|
*
|
|
* This function removes either a MAC filter rule or a specific VSI from a
|
|
* VSI list for a multicast MAC address.
|
|
*
|
|
* Returns ICE_ERR_DOES_NOT_EXIST if a given entry was not added by
|
|
* ice_add_mac. Caller should be aware that this call will only work if all
|
|
* the entries passed into m_list were added previously. It will not attempt to
|
|
* do a partial remove of entries that were found.
|
|
*/
|
|
enum ice_status
|
|
ice_remove_mac(struct ice_hw *hw, struct list_head *m_list)
|
|
{
|
|
struct ice_fltr_list_entry *list_itr, *tmp;
|
|
|
|
if (!m_list)
|
|
return ICE_ERR_PARAM;
|
|
|
|
list_for_each_entry_safe(list_itr, tmp, m_list, list_entry) {
|
|
enum ice_sw_lkup_type l_type = list_itr->fltr_info.lkup_type;
|
|
|
|
if (l_type != ICE_SW_LKUP_MAC)
|
|
return ICE_ERR_PARAM;
|
|
list_itr->status = ice_remove_rule_internal(hw,
|
|
ICE_SW_LKUP_MAC,
|
|
list_itr);
|
|
if (list_itr->status)
|
|
return list_itr->status;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ice_remove_vlan - Remove VLAN based filter rule
|
|
* @hw: pointer to the hardware structure
|
|
* @v_list: list of VLAN entries and forwarding information
|
|
*/
|
|
enum ice_status
|
|
ice_remove_vlan(struct ice_hw *hw, struct list_head *v_list)
|
|
{
|
|
struct ice_fltr_list_entry *v_list_itr, *tmp;
|
|
|
|
if (!v_list || !hw)
|
|
return ICE_ERR_PARAM;
|
|
|
|
list_for_each_entry_safe(v_list_itr, tmp, v_list, list_entry) {
|
|
enum ice_sw_lkup_type l_type = v_list_itr->fltr_info.lkup_type;
|
|
|
|
if (l_type != ICE_SW_LKUP_VLAN)
|
|
return ICE_ERR_PARAM;
|
|
v_list_itr->status = ice_remove_rule_internal(hw,
|
|
ICE_SW_LKUP_VLAN,
|
|
v_list_itr);
|
|
if (v_list_itr->status)
|
|
return v_list_itr->status;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ice_vsi_uses_fltr - Determine if given VSI uses specified filter
|
|
* @fm_entry: filter entry to inspect
|
|
* @vsi_handle: VSI handle to compare with filter info
|
|
*/
|
|
static bool
|
|
ice_vsi_uses_fltr(struct ice_fltr_mgmt_list_entry *fm_entry, u16 vsi_handle)
|
|
{
|
|
return ((fm_entry->fltr_info.fltr_act == ICE_FWD_TO_VSI &&
|
|
fm_entry->fltr_info.vsi_handle == vsi_handle) ||
|
|
(fm_entry->fltr_info.fltr_act == ICE_FWD_TO_VSI_LIST &&
|
|
(test_bit(vsi_handle, fm_entry->vsi_list_info->vsi_map))));
|
|
}
|
|
|
|
/**
|
|
* ice_add_entry_to_vsi_fltr_list - Add copy of fltr_list_entry to remove list
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: VSI handle to remove filters from
|
|
* @vsi_list_head: pointer to the list to add entry to
|
|
* @fi: pointer to fltr_info of filter entry to copy & add
|
|
*
|
|
* Helper function, used when creating a list of filters to remove from
|
|
* a specific VSI. The entry added to vsi_list_head is a COPY of the
|
|
* original filter entry, with the exception of fltr_info.fltr_act and
|
|
* fltr_info.fwd_id fields. These are set such that later logic can
|
|
* extract which VSI to remove the fltr from, and pass on that information.
|
|
*/
|
|
static enum ice_status
|
|
ice_add_entry_to_vsi_fltr_list(struct ice_hw *hw, u16 vsi_handle,
|
|
struct list_head *vsi_list_head,
|
|
struct ice_fltr_info *fi)
|
|
{
|
|
struct ice_fltr_list_entry *tmp;
|
|
|
|
/* this memory is freed up in the caller function
|
|
* once filters for this VSI are removed
|
|
*/
|
|
tmp = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*tmp), GFP_KERNEL);
|
|
if (!tmp)
|
|
return ICE_ERR_NO_MEMORY;
|
|
|
|
tmp->fltr_info = *fi;
|
|
|
|
/* Overwrite these fields to indicate which VSI to remove filter from,
|
|
* so find and remove logic can extract the information from the
|
|
* list entries. Note that original entries will still have proper
|
|
* values.
|
|
*/
|
|
tmp->fltr_info.fltr_act = ICE_FWD_TO_VSI;
|
|
tmp->fltr_info.vsi_handle = vsi_handle;
|
|
tmp->fltr_info.fwd_id.hw_vsi_id = ice_get_hw_vsi_num(hw, vsi_handle);
|
|
|
|
list_add(&tmp->list_entry, vsi_list_head);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ice_add_to_vsi_fltr_list - Add VSI filters to the list
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: VSI handle to remove filters from
|
|
* @lkup_list_head: pointer to the list that has certain lookup type filters
|
|
* @vsi_list_head: pointer to the list pertaining to VSI with vsi_handle
|
|
*
|
|
* Locates all filters in lkup_list_head that are used by the given VSI,
|
|
* and adds COPIES of those entries to vsi_list_head (intended to be used
|
|
* to remove the listed filters).
|
|
* Note that this means all entries in vsi_list_head must be explicitly
|
|
* deallocated by the caller when done with list.
|
|
*/
|
|
static enum ice_status
|
|
ice_add_to_vsi_fltr_list(struct ice_hw *hw, u16 vsi_handle,
|
|
struct list_head *lkup_list_head,
|
|
struct list_head *vsi_list_head)
|
|
{
|
|
struct ice_fltr_mgmt_list_entry *fm_entry;
|
|
enum ice_status status = 0;
|
|
|
|
/* check to make sure VSI ID is valid and within boundary */
|
|
if (!ice_is_vsi_valid(hw, vsi_handle))
|
|
return ICE_ERR_PARAM;
|
|
|
|
list_for_each_entry(fm_entry, lkup_list_head, list_entry) {
|
|
struct ice_fltr_info *fi;
|
|
|
|
fi = &fm_entry->fltr_info;
|
|
if (!fi || !ice_vsi_uses_fltr(fm_entry, vsi_handle))
|
|
continue;
|
|
|
|
status = ice_add_entry_to_vsi_fltr_list(hw, vsi_handle,
|
|
vsi_list_head, fi);
|
|
if (status)
|
|
return status;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_determine_promisc_mask
|
|
* @fi: filter info to parse
|
|
*
|
|
* Helper function to determine which ICE_PROMISC_ mask corresponds
|
|
* to given filter into.
|
|
*/
|
|
static u8 ice_determine_promisc_mask(struct ice_fltr_info *fi)
|
|
{
|
|
u16 vid = fi->l_data.mac_vlan.vlan_id;
|
|
u8 *macaddr = fi->l_data.mac.mac_addr;
|
|
bool is_tx_fltr = false;
|
|
u8 promisc_mask = 0;
|
|
|
|
if (fi->flag == ICE_FLTR_TX)
|
|
is_tx_fltr = true;
|
|
|
|
if (is_broadcast_ether_addr(macaddr))
|
|
promisc_mask |= is_tx_fltr ?
|
|
ICE_PROMISC_BCAST_TX : ICE_PROMISC_BCAST_RX;
|
|
else if (is_multicast_ether_addr(macaddr))
|
|
promisc_mask |= is_tx_fltr ?
|
|
ICE_PROMISC_MCAST_TX : ICE_PROMISC_MCAST_RX;
|
|
else if (is_unicast_ether_addr(macaddr))
|
|
promisc_mask |= is_tx_fltr ?
|
|
ICE_PROMISC_UCAST_TX : ICE_PROMISC_UCAST_RX;
|
|
if (vid)
|
|
promisc_mask |= is_tx_fltr ?
|
|
ICE_PROMISC_VLAN_TX : ICE_PROMISC_VLAN_RX;
|
|
|
|
return promisc_mask;
|
|
}
|
|
|
|
/**
|
|
* ice_remove_promisc - Remove promisc based filter rules
|
|
* @hw: pointer to the hardware structure
|
|
* @recp_id: recipe ID for which the rule needs to removed
|
|
* @v_list: list of promisc entries
|
|
*/
|
|
static enum ice_status
|
|
ice_remove_promisc(struct ice_hw *hw, u8 recp_id,
|
|
struct list_head *v_list)
|
|
{
|
|
struct ice_fltr_list_entry *v_list_itr, *tmp;
|
|
|
|
list_for_each_entry_safe(v_list_itr, tmp, v_list, list_entry) {
|
|
v_list_itr->status =
|
|
ice_remove_rule_internal(hw, recp_id, v_list_itr);
|
|
if (v_list_itr->status)
|
|
return v_list_itr->status;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ice_clear_vsi_promisc - clear specified promiscuous mode(s) for given VSI
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: VSI handle to clear mode
|
|
* @promisc_mask: mask of promiscuous config bits to clear
|
|
* @vid: VLAN ID to clear VLAN promiscuous
|
|
*/
|
|
enum ice_status
|
|
ice_clear_vsi_promisc(struct ice_hw *hw, u16 vsi_handle, u8 promisc_mask,
|
|
u16 vid)
|
|
{
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
struct ice_fltr_list_entry *fm_entry, *tmp;
|
|
struct list_head remove_list_head;
|
|
struct ice_fltr_mgmt_list_entry *itr;
|
|
struct list_head *rule_head;
|
|
struct mutex *rule_lock; /* Lock to protect filter rule list */
|
|
enum ice_status status = 0;
|
|
u8 recipe_id;
|
|
|
|
if (!ice_is_vsi_valid(hw, vsi_handle))
|
|
return ICE_ERR_PARAM;
|
|
|
|
if (vid)
|
|
recipe_id = ICE_SW_LKUP_PROMISC_VLAN;
|
|
else
|
|
recipe_id = ICE_SW_LKUP_PROMISC;
|
|
|
|
rule_head = &sw->recp_list[recipe_id].filt_rules;
|
|
rule_lock = &sw->recp_list[recipe_id].filt_rule_lock;
|
|
|
|
INIT_LIST_HEAD(&remove_list_head);
|
|
|
|
mutex_lock(rule_lock);
|
|
list_for_each_entry(itr, rule_head, list_entry) {
|
|
u8 fltr_promisc_mask = 0;
|
|
|
|
if (!ice_vsi_uses_fltr(itr, vsi_handle))
|
|
continue;
|
|
|
|
fltr_promisc_mask |=
|
|
ice_determine_promisc_mask(&itr->fltr_info);
|
|
|
|
/* Skip if filter is not completely specified by given mask */
|
|
if (fltr_promisc_mask & ~promisc_mask)
|
|
continue;
|
|
|
|
status = ice_add_entry_to_vsi_fltr_list(hw, vsi_handle,
|
|
&remove_list_head,
|
|
&itr->fltr_info);
|
|
if (status) {
|
|
mutex_unlock(rule_lock);
|
|
goto free_fltr_list;
|
|
}
|
|
}
|
|
mutex_unlock(rule_lock);
|
|
|
|
status = ice_remove_promisc(hw, recipe_id, &remove_list_head);
|
|
|
|
free_fltr_list:
|
|
list_for_each_entry_safe(fm_entry, tmp, &remove_list_head, list_entry) {
|
|
list_del(&fm_entry->list_entry);
|
|
devm_kfree(ice_hw_to_dev(hw), fm_entry);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_set_vsi_promisc - set given VSI to given promiscuous mode(s)
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: VSI handle to configure
|
|
* @promisc_mask: mask of promiscuous config bits
|
|
* @vid: VLAN ID to set VLAN promiscuous
|
|
*/
|
|
enum ice_status
|
|
ice_set_vsi_promisc(struct ice_hw *hw, u16 vsi_handle, u8 promisc_mask, u16 vid)
|
|
{
|
|
enum { UCAST_FLTR = 1, MCAST_FLTR, BCAST_FLTR };
|
|
struct ice_fltr_list_entry f_list_entry;
|
|
struct ice_fltr_info new_fltr;
|
|
enum ice_status status = 0;
|
|
bool is_tx_fltr;
|
|
u16 hw_vsi_id;
|
|
int pkt_type;
|
|
u8 recipe_id;
|
|
|
|
if (!ice_is_vsi_valid(hw, vsi_handle))
|
|
return ICE_ERR_PARAM;
|
|
hw_vsi_id = ice_get_hw_vsi_num(hw, vsi_handle);
|
|
|
|
memset(&new_fltr, 0, sizeof(new_fltr));
|
|
|
|
if (promisc_mask & (ICE_PROMISC_VLAN_RX | ICE_PROMISC_VLAN_TX)) {
|
|
new_fltr.lkup_type = ICE_SW_LKUP_PROMISC_VLAN;
|
|
new_fltr.l_data.mac_vlan.vlan_id = vid;
|
|
recipe_id = ICE_SW_LKUP_PROMISC_VLAN;
|
|
} else {
|
|
new_fltr.lkup_type = ICE_SW_LKUP_PROMISC;
|
|
recipe_id = ICE_SW_LKUP_PROMISC;
|
|
}
|
|
|
|
/* Separate filters must be set for each direction/packet type
|
|
* combination, so we will loop over the mask value, store the
|
|
* individual type, and clear it out in the input mask as it
|
|
* is found.
|
|
*/
|
|
while (promisc_mask) {
|
|
u8 *mac_addr;
|
|
|
|
pkt_type = 0;
|
|
is_tx_fltr = false;
|
|
|
|
if (promisc_mask & ICE_PROMISC_UCAST_RX) {
|
|
promisc_mask &= ~ICE_PROMISC_UCAST_RX;
|
|
pkt_type = UCAST_FLTR;
|
|
} else if (promisc_mask & ICE_PROMISC_UCAST_TX) {
|
|
promisc_mask &= ~ICE_PROMISC_UCAST_TX;
|
|
pkt_type = UCAST_FLTR;
|
|
is_tx_fltr = true;
|
|
} else if (promisc_mask & ICE_PROMISC_MCAST_RX) {
|
|
promisc_mask &= ~ICE_PROMISC_MCAST_RX;
|
|
pkt_type = MCAST_FLTR;
|
|
} else if (promisc_mask & ICE_PROMISC_MCAST_TX) {
|
|
promisc_mask &= ~ICE_PROMISC_MCAST_TX;
|
|
pkt_type = MCAST_FLTR;
|
|
is_tx_fltr = true;
|
|
} else if (promisc_mask & ICE_PROMISC_BCAST_RX) {
|
|
promisc_mask &= ~ICE_PROMISC_BCAST_RX;
|
|
pkt_type = BCAST_FLTR;
|
|
} else if (promisc_mask & ICE_PROMISC_BCAST_TX) {
|
|
promisc_mask &= ~ICE_PROMISC_BCAST_TX;
|
|
pkt_type = BCAST_FLTR;
|
|
is_tx_fltr = true;
|
|
}
|
|
|
|
/* Check for VLAN promiscuous flag */
|
|
if (promisc_mask & ICE_PROMISC_VLAN_RX) {
|
|
promisc_mask &= ~ICE_PROMISC_VLAN_RX;
|
|
} else if (promisc_mask & ICE_PROMISC_VLAN_TX) {
|
|
promisc_mask &= ~ICE_PROMISC_VLAN_TX;
|
|
is_tx_fltr = true;
|
|
}
|
|
|
|
/* Set filter DA based on packet type */
|
|
mac_addr = new_fltr.l_data.mac.mac_addr;
|
|
if (pkt_type == BCAST_FLTR) {
|
|
eth_broadcast_addr(mac_addr);
|
|
} else if (pkt_type == MCAST_FLTR ||
|
|
pkt_type == UCAST_FLTR) {
|
|
/* Use the dummy ether header DA */
|
|
ether_addr_copy(mac_addr, dummy_eth_header);
|
|
if (pkt_type == MCAST_FLTR)
|
|
mac_addr[0] |= 0x1; /* Set multicast bit */
|
|
}
|
|
|
|
/* Need to reset this to zero for all iterations */
|
|
new_fltr.flag = 0;
|
|
if (is_tx_fltr) {
|
|
new_fltr.flag |= ICE_FLTR_TX;
|
|
new_fltr.src = hw_vsi_id;
|
|
} else {
|
|
new_fltr.flag |= ICE_FLTR_RX;
|
|
new_fltr.src = hw->port_info->lport;
|
|
}
|
|
|
|
new_fltr.fltr_act = ICE_FWD_TO_VSI;
|
|
new_fltr.vsi_handle = vsi_handle;
|
|
new_fltr.fwd_id.hw_vsi_id = hw_vsi_id;
|
|
f_list_entry.fltr_info = new_fltr;
|
|
|
|
status = ice_add_rule_internal(hw, recipe_id, &f_list_entry);
|
|
if (status)
|
|
goto set_promisc_exit;
|
|
}
|
|
|
|
set_promisc_exit:
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_set_vlan_vsi_promisc
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: VSI handle to configure
|
|
* @promisc_mask: mask of promiscuous config bits
|
|
* @rm_vlan_promisc: Clear VLANs VSI promisc mode
|
|
*
|
|
* Configure VSI with all associated VLANs to given promiscuous mode(s)
|
|
*/
|
|
enum ice_status
|
|
ice_set_vlan_vsi_promisc(struct ice_hw *hw, u16 vsi_handle, u8 promisc_mask,
|
|
bool rm_vlan_promisc)
|
|
{
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
struct ice_fltr_list_entry *list_itr, *tmp;
|
|
struct list_head vsi_list_head;
|
|
struct list_head *vlan_head;
|
|
struct mutex *vlan_lock; /* Lock to protect filter rule list */
|
|
enum ice_status status;
|
|
u16 vlan_id;
|
|
|
|
INIT_LIST_HEAD(&vsi_list_head);
|
|
vlan_lock = &sw->recp_list[ICE_SW_LKUP_VLAN].filt_rule_lock;
|
|
vlan_head = &sw->recp_list[ICE_SW_LKUP_VLAN].filt_rules;
|
|
mutex_lock(vlan_lock);
|
|
status = ice_add_to_vsi_fltr_list(hw, vsi_handle, vlan_head,
|
|
&vsi_list_head);
|
|
mutex_unlock(vlan_lock);
|
|
if (status)
|
|
goto free_fltr_list;
|
|
|
|
list_for_each_entry(list_itr, &vsi_list_head, list_entry) {
|
|
vlan_id = list_itr->fltr_info.l_data.vlan.vlan_id;
|
|
if (rm_vlan_promisc)
|
|
status = ice_clear_vsi_promisc(hw, vsi_handle,
|
|
promisc_mask, vlan_id);
|
|
else
|
|
status = ice_set_vsi_promisc(hw, vsi_handle,
|
|
promisc_mask, vlan_id);
|
|
if (status)
|
|
break;
|
|
}
|
|
|
|
free_fltr_list:
|
|
list_for_each_entry_safe(list_itr, tmp, &vsi_list_head, list_entry) {
|
|
list_del(&list_itr->list_entry);
|
|
devm_kfree(ice_hw_to_dev(hw), list_itr);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_remove_vsi_lkup_fltr - Remove lookup type filters for a VSI
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: VSI handle to remove filters from
|
|
* @lkup: switch rule filter lookup type
|
|
*/
|
|
static void
|
|
ice_remove_vsi_lkup_fltr(struct ice_hw *hw, u16 vsi_handle,
|
|
enum ice_sw_lkup_type lkup)
|
|
{
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
struct ice_fltr_list_entry *fm_entry;
|
|
struct list_head remove_list_head;
|
|
struct list_head *rule_head;
|
|
struct ice_fltr_list_entry *tmp;
|
|
struct mutex *rule_lock; /* Lock to protect filter rule list */
|
|
enum ice_status status;
|
|
|
|
INIT_LIST_HEAD(&remove_list_head);
|
|
rule_lock = &sw->recp_list[lkup].filt_rule_lock;
|
|
rule_head = &sw->recp_list[lkup].filt_rules;
|
|
mutex_lock(rule_lock);
|
|
status = ice_add_to_vsi_fltr_list(hw, vsi_handle, rule_head,
|
|
&remove_list_head);
|
|
mutex_unlock(rule_lock);
|
|
if (status)
|
|
return;
|
|
|
|
switch (lkup) {
|
|
case ICE_SW_LKUP_MAC:
|
|
ice_remove_mac(hw, &remove_list_head);
|
|
break;
|
|
case ICE_SW_LKUP_VLAN:
|
|
ice_remove_vlan(hw, &remove_list_head);
|
|
break;
|
|
case ICE_SW_LKUP_PROMISC:
|
|
case ICE_SW_LKUP_PROMISC_VLAN:
|
|
ice_remove_promisc(hw, lkup, &remove_list_head);
|
|
break;
|
|
case ICE_SW_LKUP_MAC_VLAN:
|
|
case ICE_SW_LKUP_ETHERTYPE:
|
|
case ICE_SW_LKUP_ETHERTYPE_MAC:
|
|
case ICE_SW_LKUP_DFLT:
|
|
case ICE_SW_LKUP_LAST:
|
|
default:
|
|
ice_debug(hw, ICE_DBG_SW, "Unsupported lookup type %d\n", lkup);
|
|
break;
|
|
}
|
|
|
|
list_for_each_entry_safe(fm_entry, tmp, &remove_list_head, list_entry) {
|
|
list_del(&fm_entry->list_entry);
|
|
devm_kfree(ice_hw_to_dev(hw), fm_entry);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ice_remove_vsi_fltr - Remove all filters for a VSI
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: VSI handle to remove filters from
|
|
*/
|
|
void ice_remove_vsi_fltr(struct ice_hw *hw, u16 vsi_handle)
|
|
{
|
|
ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_MAC);
|
|
ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_MAC_VLAN);
|
|
ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_PROMISC);
|
|
ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_VLAN);
|
|
ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_DFLT);
|
|
ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_ETHERTYPE);
|
|
ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_ETHERTYPE_MAC);
|
|
ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_PROMISC_VLAN);
|
|
}
|
|
|
|
/**
|
|
* ice_replay_vsi_fltr - Replay filters for requested VSI
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: driver VSI handle
|
|
* @recp_id: Recipe ID for which rules need to be replayed
|
|
* @list_head: list for which filters need to be replayed
|
|
*
|
|
* Replays the filter of recipe recp_id for a VSI represented via vsi_handle.
|
|
* It is required to pass valid VSI handle.
|
|
*/
|
|
static enum ice_status
|
|
ice_replay_vsi_fltr(struct ice_hw *hw, u16 vsi_handle, u8 recp_id,
|
|
struct list_head *list_head)
|
|
{
|
|
struct ice_fltr_mgmt_list_entry *itr;
|
|
enum ice_status status = 0;
|
|
u16 hw_vsi_id;
|
|
|
|
if (list_empty(list_head))
|
|
return status;
|
|
hw_vsi_id = ice_get_hw_vsi_num(hw, vsi_handle);
|
|
|
|
list_for_each_entry(itr, list_head, list_entry) {
|
|
struct ice_fltr_list_entry f_entry;
|
|
|
|
f_entry.fltr_info = itr->fltr_info;
|
|
if (itr->vsi_count < 2 && recp_id != ICE_SW_LKUP_VLAN &&
|
|
itr->fltr_info.vsi_handle == vsi_handle) {
|
|
/* update the src in case it is VSI num */
|
|
if (f_entry.fltr_info.src_id == ICE_SRC_ID_VSI)
|
|
f_entry.fltr_info.src = hw_vsi_id;
|
|
status = ice_add_rule_internal(hw, recp_id, &f_entry);
|
|
if (status)
|
|
goto end;
|
|
continue;
|
|
}
|
|
if (!itr->vsi_list_info ||
|
|
!test_bit(vsi_handle, itr->vsi_list_info->vsi_map))
|
|
continue;
|
|
/* Clearing it so that the logic can add it back */
|
|
clear_bit(vsi_handle, itr->vsi_list_info->vsi_map);
|
|
f_entry.fltr_info.vsi_handle = vsi_handle;
|
|
f_entry.fltr_info.fltr_act = ICE_FWD_TO_VSI;
|
|
/* update the src in case it is VSI num */
|
|
if (f_entry.fltr_info.src_id == ICE_SRC_ID_VSI)
|
|
f_entry.fltr_info.src = hw_vsi_id;
|
|
if (recp_id == ICE_SW_LKUP_VLAN)
|
|
status = ice_add_vlan_internal(hw, &f_entry);
|
|
else
|
|
status = ice_add_rule_internal(hw, recp_id, &f_entry);
|
|
if (status)
|
|
goto end;
|
|
}
|
|
end:
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_replay_vsi_all_fltr - replay all filters stored in bookkeeping lists
|
|
* @hw: pointer to the hardware structure
|
|
* @vsi_handle: driver VSI handle
|
|
*
|
|
* Replays filters for requested VSI via vsi_handle.
|
|
*/
|
|
enum ice_status ice_replay_vsi_all_fltr(struct ice_hw *hw, u16 vsi_handle)
|
|
{
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
enum ice_status status = 0;
|
|
u8 i;
|
|
|
|
for (i = 0; i < ICE_SW_LKUP_LAST; i++) {
|
|
struct list_head *head;
|
|
|
|
head = &sw->recp_list[i].filt_replay_rules;
|
|
status = ice_replay_vsi_fltr(hw, vsi_handle, i, head);
|
|
if (status)
|
|
return status;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ice_rm_all_sw_replay_rule_info - deletes filter replay rules
|
|
* @hw: pointer to the HW struct
|
|
*
|
|
* Deletes the filter replay rules.
|
|
*/
|
|
void ice_rm_all_sw_replay_rule_info(struct ice_hw *hw)
|
|
{
|
|
struct ice_switch_info *sw = hw->switch_info;
|
|
u8 i;
|
|
|
|
if (!sw)
|
|
return;
|
|
|
|
for (i = 0; i < ICE_SW_LKUP_LAST; i++) {
|
|
if (!list_empty(&sw->recp_list[i].filt_replay_rules)) {
|
|
struct list_head *l_head;
|
|
|
|
l_head = &sw->recp_list[i].filt_replay_rules;
|
|
ice_rem_sw_rule_info(hw, l_head);
|
|
}
|
|
}
|
|
}
|