AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-23 16:09:57 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
0982a24f24
linux_dsm_epyc7002/arch/arm/boot/dts/am335x-shc.dts
Javier Martinez Canillas 05e7d622f1 ARM: dts: omap: Add generic compatible string for I2C EEPROM 
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-05-26 08:50:45 -07:00

578 lines
14 KiB
Plaintext
Raw Blame History

/*
* support for the bosch am335x based shc c3 board
*
* Copyright, C) 2015 Heiko Schocher <hs@denx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "am33xx.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Bosch SHC";
compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
aliases {
mmcblk0 = &mmc1;
mmcblk1 = &mmc2;
};
cpus {
cpu@0 {
/*
* To consider voltage drop between PMIC and SoC,
* tolerance value is reduced to 2% from 4% and
* voltage value is increased as a precaution.
*/
operating-points = <
/* kHz uV */
594000 1225000
294000 1125000
>;
voltage-tolerance = <2>; /* 2 percentage */
cpu0-supply = <&dcdc2_reg>;
};
};
gpio_keys {
compatible = "gpio-keys";
back_button {
label = "Back Button";
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_BACK>;
debounce-interval = <1000>;
wakeup-source;
};
front_button {
label = "Front Button";
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_FRONT>;
debounce-interval = <1000>;
wakeup-source;
};
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
compatible = "gpio-leds";
led1 {
label = "shc:power:red";
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led2 {
label = "shc:power:bl";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
default-state = "on";
};
led3 {
label = "shc:lan:red";
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led4 {
label = "shc:lan:bl";
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led5 {
label = "shc:cloud:red";
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led6 {
label = "shc:cloud:bl";
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&aes {
status = "okay";
};
&cppi41dma {
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
ethernetphy0: ethernet-phy@0 {
reg = <0>;
smsc,disable-energy-detect;
};
};
&epwmss1 {
status = "okay";
ehrpwm1: pwm@48302200 {
pinctrl-names = "default";
pinctrl-0 = <&ehrpwm1_pins>;
status = "okay";
};
};
&gpio1 {
hmtc_rst {
gpio-hog;
gpios = <24 GPIO_ACTIVE_LOW>;
output-high;
line-name = "homematic_reset";
};
hmtc_prog {
gpio-hog;
gpios = <27 GPIO_ACTIVE_LOW>;
output-high;
line-name = "homematic_program";
};
};
&gpio3 {
zgb_rst {
gpio-hog;
gpios = <18 GPIO_ACTIVE_LOW>;
output-low;
line-name = "zigbee_reset";
};
zgb_boot {
gpio-hog;
gpios = <19 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "zigbee_boot";
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <400000>;
tps: tps@24 {
reg = <0x24>;
};
at24@50 {
compatible = "atmel,24c32";
pagesize = <32>;
reg = <0x50>;
};
pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
slaves = <1>;
cpsw_emac0: slave@4a100200 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "mii";
phy-handle = <&ethernetphy0>;
};
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
bus-width = <0x4>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
max-frequency = <26000000>;
vmmc-supply = <&vmmcsd_fixed>;
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&emmc_pins>;
bus-width = <8>;
max-frequency = <26000000>;
sd-uhs-sdr25;
vmmc-supply = <&vmmcsd_fixed>;
status = "okay";
};
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins>;
bus-width = <4>;
cap-power-off-card;
max-frequency = <26000000>;
sd-uhs-sdr25;
vmmc-supply = <&vmmcsd_fixed>;
status = "okay";
};
&rtc {
ti,no-init;
};
&sham {
status = "okay";
};
&tps {
compatible = "ti,tps65217";
ti,pmic-shutdown-controller;
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
regulator-name = "vdds_dpr";
regulator-compatible = "dcdc1";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1450000>;
regulator-boot-on;
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
/*
* VDD_MPU voltage limits 0.95V - 1.26V with
* +/-4% tolerance
*/
regulator-compatible = "dcdc2";
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1375000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <70000>;
};
dcdc3_reg: regulator@2 {
reg = <2>;
/*
* VDD_CORE voltage limits 0.95V - 1.1V with
* +/-4% tolerance
*/
regulator-name = "vdd_core";
regulator-compatible = "dcdc3";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1125000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-compatible = "ldo1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-compatible = "ldo2";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
regulator-name = "vdd_1v8";
regulator-compatible = "ldo3";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo4_reg: regulator@6 {
reg = <6>;
regulator-name = "vdd_3v3a";
regulator-compatible = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
status = "okay";
};
&usb {
status = "okay";
};
&usb_ctrl_mod {
status = "okay";
};
&usb1_phy {
status = "okay";
};
&usb1 {
status = "okay";
dr_mode = "host";
};
&am33xx_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&clkout2_pin>;
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
/* xdma_event_intr1.clkout2 */
AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* mdio_data.mdio_data */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
/* mdio_clk.mdio_clk */
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
ehrpwm1_pins: pinmux_ehrpwm1 {
pinctrl-single,pins = <
AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
>;
};
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
>;
};
uart1_pins: pinmux_uart1 {
pinctrl-single,pins = <
AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
>;
};
uart4_pins: pinmux_uart4_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
>;
};
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
>;
};
};
Reference in New Issue View Git Blame Copy Permalink