linux_dsm_epyc7002/arch/arm/mach-sa1100/neponset.c
Russell King 5c9e4d8c84 ARM: sa1100/neponset: convert serial to use gpiod APIs
Convert the serial modem control signals to use the gpiod APIs rather
than the private platform callbacks.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-06-04 12:56:46 +01:00

441 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/arm/mach-sa1100/neponset.c
*/
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/gpio-reg.h>
#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/serial_core.h>
#include <linux/slab.h>
#include <linux/smc91x.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/hardware/sa1111.h>
#include <linux/sizes.h>
#include <mach/hardware.h>
#include <mach/assabet.h>
#include <mach/neponset.h>
#include <mach/irqs.h>
#define NEP_IRQ_SMC91X 0
#define NEP_IRQ_USAR 1
#define NEP_IRQ_SA1111 2
#define NEP_IRQ_NR 3
#define WHOAMI 0x00
#define LEDS 0x10
#define SWPK 0x20
#define IRR 0x24
#define KP_Y_IN 0x80
#define KP_X_OUT 0x90
#define NCR_0 0xa0
#define MDM_CTL_0 0xb0
#define MDM_CTL_1 0xb4
#define AUD_CTL 0xc0
#define IRR_ETHERNET (1 << 0)
#define IRR_USAR (1 << 1)
#define IRR_SA1111 (1 << 2)
#define NCR_NGPIO 7
#define MDM_CTL0_NGPIO 4
#define MDM_CTL1_NGPIO 6
#define AUD_NGPIO 2
extern void sa1110_mb_disable(void);
#define to_neponset_gpio_chip(x) container_of(x, struct neponset_gpio_chip, gc)
static const char *neponset_ncr_names[] = {
"gp01_off", "tp_power", "ms_power", "enet_osc",
"spi_kb_wk_up", "a0vpp", "a1vpp"
};
static const char *neponset_mdmctl0_names[] = {
"rts3", "dtr3", "rts1", "dtr1",
};
static const char *neponset_mdmctl1_names[] = {
"cts3", "dsr3", "dcd3", "cts1", "dsr1", "dcd1"
};
static const char *neponset_aud_names[] = {
"sel_1341", "mute_1341",
};
struct neponset_drvdata {
void __iomem *base;
struct platform_device *sa1111;
struct platform_device *smc91x;
unsigned irq_base;
struct gpio_chip *gpio[4];
};
static struct gpiod_lookup_table neponset_uart1_gpio_table = {
.dev_id = "sa11x0-uart.1",
.table = {
GPIO_LOOKUP("neponset-mdm-ctl0", 2, "rts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl0", 3, "dtr", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 3, "cts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 4, "dsr", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 5, "dcd", GPIO_ACTIVE_LOW),
{ },
},
};
static struct gpiod_lookup_table neponset_uart3_gpio_table = {
.dev_id = "sa11x0-uart.3",
.table = {
GPIO_LOOKUP("neponset-mdm-ctl0", 0, "rts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl0", 1, "dtr", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 0, "cts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 1, "dsr", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 2, "dcd", GPIO_ACTIVE_LOW),
{ },
},
};
static struct gpiod_lookup_table neponset_pcmcia_table = {
.dev_id = "1800",
.table = {
GPIO_LOOKUP("sa1111", 1, "a0vcc", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("sa1111", 0, "a1vcc", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("neponset-ncr", 5, "a0vpp", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("neponset-ncr", 6, "a1vpp", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("sa1111", 2, "b0vcc", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("sa1111", 3, "b1vcc", GPIO_ACTIVE_HIGH),
{ },
},
};
static struct neponset_drvdata *nep;
void neponset_ncr_frob(unsigned int mask, unsigned int val)
{
struct neponset_drvdata *n = nep;
unsigned long m = mask, v = val;
if (nep)
n->gpio[0]->set_multiple(n->gpio[0], &m, &v);
else
WARN(1, "nep unset\n");
}
EXPORT_SYMBOL(neponset_ncr_frob);
/*
* Install handler for Neponset IRQ. Note that we have to loop here
* since the ETHERNET and USAR IRQs are level based, and we need to
* ensure that the IRQ signal is deasserted before returning. This
* is rather unfortunate.
*/
static void neponset_irq_handler(struct irq_desc *desc)
{
struct neponset_drvdata *d = irq_desc_get_handler_data(desc);
unsigned int irr;
while (1) {
/*
* Acknowledge the parent IRQ.
*/
desc->irq_data.chip->irq_ack(&desc->irq_data);
/*
* Read the interrupt reason register. Let's have all
* active IRQ bits high. Note: there is a typo in the
* Neponset user's guide for the SA1111 IRR level.
*/
irr = readb_relaxed(d->base + IRR);
irr ^= IRR_ETHERNET | IRR_USAR;
if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
break;
/*
* Since there is no individual mask, we have to
* mask the parent IRQ. This is safe, since we'll
* recheck the register for any pending IRQs.
*/
if (irr & (IRR_ETHERNET | IRR_USAR)) {
desc->irq_data.chip->irq_mask(&desc->irq_data);
/*
* Ack the interrupt now to prevent re-entering
* this neponset handler. Again, this is safe
* since we'll check the IRR register prior to
* leaving.
*/
desc->irq_data.chip->irq_ack(&desc->irq_data);
if (irr & IRR_ETHERNET)
generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X);
if (irr & IRR_USAR)
generic_handle_irq(d->irq_base + NEP_IRQ_USAR);
desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
if (irr & IRR_SA1111)
generic_handle_irq(d->irq_base + NEP_IRQ_SA1111);
}
}
/* Yes, we really do not have any kind of masking or unmasking */
static void nochip_noop(struct irq_data *irq)
{
}
static struct irq_chip nochip = {
.name = "neponset",
.irq_ack = nochip_noop,
.irq_mask = nochip_noop,
.irq_unmask = nochip_noop,
};
static int neponset_init_gpio(struct gpio_chip **gcp,
struct device *dev, const char *label, void __iomem *reg,
unsigned num, bool in, const char *const * names)
{
struct gpio_chip *gc;
gc = gpio_reg_init(dev, reg, -1, num, label, in ? 0xffffffff : 0,
readl_relaxed(reg), names, NULL, NULL);
if (IS_ERR(gc))
return PTR_ERR(gc);
*gcp = gc;
return 0;
}
static struct sa1111_platform_data sa1111_info = {
.disable_devs = SA1111_DEVID_PS2_MSE,
};
static int neponset_probe(struct platform_device *dev)
{
struct neponset_drvdata *d;
struct resource *nep_res, *sa1111_res, *smc91x_res;
struct resource sa1111_resources[] = {
DEFINE_RES_MEM(0x40000000, SZ_8K),
{ .flags = IORESOURCE_IRQ },
};
struct platform_device_info sa1111_devinfo = {
.parent = &dev->dev,
.name = "sa1111",
.id = 0,
.res = sa1111_resources,
.num_res = ARRAY_SIZE(sa1111_resources),
.data = &sa1111_info,
.size_data = sizeof(sa1111_info),
.dma_mask = 0xffffffffUL,
};
struct resource smc91x_resources[] = {
DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS,
0x02000000, "smc91x-regs"),
DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000,
0x02000000, "smc91x-attrib"),
{ .flags = IORESOURCE_IRQ },
};
struct smc91x_platdata smc91x_platdata = {
.flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT,
};
struct platform_device_info smc91x_devinfo = {
.parent = &dev->dev,
.name = "smc91x",
.id = 0,
.res = smc91x_resources,
.num_res = ARRAY_SIZE(smc91x_resources),
.data = &smc91x_platdata,
.size_data = sizeof(smc91x_platdata),
};
int ret, irq;
if (nep)
return -EBUSY;
irq = ret = platform_get_irq(dev, 0);
if (ret < 0)
goto err_alloc;
nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2);
if (!nep_res || !smc91x_res || !sa1111_res) {
ret = -ENXIO;
goto err_alloc;
}
d = kzalloc(sizeof(*d), GFP_KERNEL);
if (!d) {
ret = -ENOMEM;
goto err_alloc;
}
d->base = ioremap(nep_res->start, SZ_4K);
if (!d->base) {
ret = -ENOMEM;
goto err_ioremap;
}
if (readb_relaxed(d->base + WHOAMI) != 0x11) {
dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n",
readb_relaxed(d->base + WHOAMI));
ret = -ENODEV;
goto err_id;
}
ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1);
if (ret <= 0) {
dev_err(&dev->dev, "unable to allocate %u irqs: %d\n",
NEP_IRQ_NR, ret);
if (ret == 0)
ret = -ENOMEM;
goto err_irq_alloc;
}
d->irq_base = ret;
irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip,
handle_simple_irq);
irq_clear_status_flags(d->irq_base + NEP_IRQ_SMC91X, IRQ_NOREQUEST | IRQ_NOPROBE);
irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip,
handle_simple_irq);
irq_clear_status_flags(d->irq_base + NEP_IRQ_USAR, IRQ_NOREQUEST | IRQ_NOPROBE);
irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip);
irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
irq_set_chained_handler_and_data(irq, neponset_irq_handler, d);
/* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
neponset_init_gpio(&d->gpio[0], &dev->dev, "neponset-ncr",
d->base + NCR_0, NCR_NGPIO, false,
neponset_ncr_names);
neponset_init_gpio(&d->gpio[1], &dev->dev, "neponset-mdm-ctl0",
d->base + MDM_CTL_0, MDM_CTL0_NGPIO, false,
neponset_mdmctl0_names);
neponset_init_gpio(&d->gpio[2], &dev->dev, "neponset-mdm-ctl1",
d->base + MDM_CTL_1, MDM_CTL1_NGPIO, true,
neponset_mdmctl1_names);
neponset_init_gpio(&d->gpio[3], &dev->dev, "neponset-aud-ctl",
d->base + AUD_CTL, AUD_NGPIO, false,
neponset_aud_names);
gpiod_add_lookup_table(&neponset_uart1_gpio_table);
gpiod_add_lookup_table(&neponset_uart3_gpio_table);
gpiod_add_lookup_table(&neponset_pcmcia_table);
/*
* We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
* something on the Neponset activates this IRQ on sleep (eth?)
*/
#if 0
enable_irq_wake(irq);
#endif
dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n",
d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
nep = d;
/* Ensure that the memory bus request/grant signals are setup */
sa1110_mb_disable();
sa1111_resources[0].parent = sa1111_res;
sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111;
sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111;
d->sa1111 = platform_device_register_full(&sa1111_devinfo);
smc91x_resources[0].parent = smc91x_res;
smc91x_resources[1].parent = smc91x_res;
smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X;
smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X;
d->smc91x = platform_device_register_full(&smc91x_devinfo);
platform_set_drvdata(dev, d);
return 0;
err_irq_alloc:
err_id:
iounmap(d->base);
err_ioremap:
kfree(d);
err_alloc:
return ret;
}
static int neponset_remove(struct platform_device *dev)
{
struct neponset_drvdata *d = platform_get_drvdata(dev);
int irq = platform_get_irq(dev, 0);
if (!IS_ERR(d->sa1111))
platform_device_unregister(d->sa1111);
if (!IS_ERR(d->smc91x))
platform_device_unregister(d->smc91x);
gpiod_remove_lookup_table(&neponset_pcmcia_table);
gpiod_remove_lookup_table(&neponset_uart3_gpio_table);
gpiod_remove_lookup_table(&neponset_uart1_gpio_table);
irq_set_chained_handler(irq, NULL);
irq_free_descs(d->irq_base, NEP_IRQ_NR);
nep = NULL;
iounmap(d->base);
kfree(d);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int neponset_resume(struct device *dev)
{
struct neponset_drvdata *d = dev_get_drvdata(dev);
int i, ret = 0;
for (i = 0; i < ARRAY_SIZE(d->gpio); i++) {
ret = gpio_reg_resume(d->gpio[i]);
if (ret)
break;
}
return ret;
}
static const struct dev_pm_ops neponset_pm_ops = {
.resume_noirq = neponset_resume,
.restore_noirq = neponset_resume,
};
#define PM_OPS &neponset_pm_ops
#else
#define PM_OPS NULL
#endif
static struct platform_driver neponset_device_driver = {
.probe = neponset_probe,
.remove = neponset_remove,
.driver = {
.name = "neponset",
.pm = PM_OPS,
},
};
static int __init neponset_init(void)
{
return platform_driver_register(&neponset_device_driver);
}
subsys_initcall(neponset_init);