mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 10:39:23 +07:00
0902d5011c
Pull x96 apic updates from Thomas Gleixner: "Updates for the x86 APIC interrupt handling and APIC timer: - Fix a long standing issue with spurious interrupts which was caused by the big vector management rework a few years ago. Robert Hodaszi provided finally enough debug data and an excellent initial failure analysis which allowed to understand the underlying issues. This contains a change to the core interrupt management code which is required to handle this correctly for the APIC/IO_APIC. The core changes are NOOPs for most architectures except ARM64. ARM64 is not impacted by the change as confirmed by Marc Zyngier. - Newer systems allow to disable the PIT clock for power saving causing panic in the timer interrupt delivery check of the IO/APIC when the HPET timer is not enabled either. While the clock could be turned on this would cause an endless whack a mole game to chase the proper register in each affected chipset. These systems provide the relevant frequencies for TSC, CPU and the local APIC timer via CPUID and/or MSRs, which allows to avoid the PIT/HPET based calibration. As the calibration code is the only usage of the legacy timers on modern systems and is skipped anyway when the frequencies are known already, there is no point in setting up the PIT and actually checking for the interrupt delivery via IO/APIC. To achieve this on a wide variety of platforms, the CPUID/MSR based frequency readout has been made more robust, which also allowed to remove quite some workarounds which turned out to be not longer required. Thanks to Daniel Drake for analysis, patches and verification" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Seperate unused system vectors from spurious entry again x86/irq: Handle spurious interrupt after shutdown gracefully x86/ioapic: Implement irq_get_irqchip_state() callback genirq: Add optional hardware synchronization for shutdown genirq: Fix misleading synchronize_irq() documentation genirq: Delay deactivation in free_irq() x86/timer: Skip PIT initialization on modern chipsets x86/apic: Use non-atomic operations when possible x86/apic: Make apic_bsp_setup() static x86/tsc: Set LAPIC timer period to crystal clock frequency x86/apic: Rename 'lapic_timer_frequency' to 'lapic_timer_period' x86/tsc: Use CPUID.0x16 to calculate missing crystal frequency
327 lines
9.2 KiB
C
327 lines
9.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Intel SMP support routines.
|
|
*
|
|
* (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
|
|
* (c) 1998-99, 2000, 2009 Ingo Molnar <mingo@redhat.com>
|
|
* (c) 2002,2003 Andi Kleen, SuSE Labs.
|
|
*
|
|
* i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com>
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/mm.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/export.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/mc146818rtc.h>
|
|
#include <linux/cache.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/gfp.h>
|
|
|
|
#include <asm/mtrr.h>
|
|
#include <asm/tlbflush.h>
|
|
#include <asm/mmu_context.h>
|
|
#include <asm/proto.h>
|
|
#include <asm/apic.h>
|
|
#include <asm/nmi.h>
|
|
#include <asm/mce.h>
|
|
#include <asm/trace/irq_vectors.h>
|
|
#include <asm/kexec.h>
|
|
#include <asm/virtext.h>
|
|
|
|
/*
|
|
* Some notes on x86 processor bugs affecting SMP operation:
|
|
*
|
|
* Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
|
|
* The Linux implications for SMP are handled as follows:
|
|
*
|
|
* Pentium III / [Xeon]
|
|
* None of the E1AP-E3AP errata are visible to the user.
|
|
*
|
|
* E1AP. see PII A1AP
|
|
* E2AP. see PII A2AP
|
|
* E3AP. see PII A3AP
|
|
*
|
|
* Pentium II / [Xeon]
|
|
* None of the A1AP-A3AP errata are visible to the user.
|
|
*
|
|
* A1AP. see PPro 1AP
|
|
* A2AP. see PPro 2AP
|
|
* A3AP. see PPro 7AP
|
|
*
|
|
* Pentium Pro
|
|
* None of 1AP-9AP errata are visible to the normal user,
|
|
* except occasional delivery of 'spurious interrupt' as trap #15.
|
|
* This is very rare and a non-problem.
|
|
*
|
|
* 1AP. Linux maps APIC as non-cacheable
|
|
* 2AP. worked around in hardware
|
|
* 3AP. fixed in C0 and above steppings microcode update.
|
|
* Linux does not use excessive STARTUP_IPIs.
|
|
* 4AP. worked around in hardware
|
|
* 5AP. symmetric IO mode (normal Linux operation) not affected.
|
|
* 'noapic' mode has vector 0xf filled out properly.
|
|
* 6AP. 'noapic' mode might be affected - fixed in later steppings
|
|
* 7AP. We do not assume writes to the LVT deassering IRQs
|
|
* 8AP. We do not enable low power mode (deep sleep) during MP bootup
|
|
* 9AP. We do not use mixed mode
|
|
*
|
|
* Pentium
|
|
* There is a marginal case where REP MOVS on 100MHz SMP
|
|
* machines with B stepping processors can fail. XXX should provide
|
|
* an L1cache=Writethrough or L1cache=off option.
|
|
*
|
|
* B stepping CPUs may hang. There are hardware work arounds
|
|
* for this. We warn about it in case your board doesn't have the work
|
|
* arounds. Basically that's so I can tell anyone with a B stepping
|
|
* CPU and SMP problems "tough".
|
|
*
|
|
* Specific items [From Pentium Processor Specification Update]
|
|
*
|
|
* 1AP. Linux doesn't use remote read
|
|
* 2AP. Linux doesn't trust APIC errors
|
|
* 3AP. We work around this
|
|
* 4AP. Linux never generated 3 interrupts of the same priority
|
|
* to cause a lost local interrupt.
|
|
* 5AP. Remote read is never used
|
|
* 6AP. not affected - worked around in hardware
|
|
* 7AP. not affected - worked around in hardware
|
|
* 8AP. worked around in hardware - we get explicit CS errors if not
|
|
* 9AP. only 'noapic' mode affected. Might generate spurious
|
|
* interrupts, we log only the first one and count the
|
|
* rest silently.
|
|
* 10AP. not affected - worked around in hardware
|
|
* 11AP. Linux reads the APIC between writes to avoid this, as per
|
|
* the documentation. Make sure you preserve this as it affects
|
|
* the C stepping chips too.
|
|
* 12AP. not affected - worked around in hardware
|
|
* 13AP. not affected - worked around in hardware
|
|
* 14AP. we always deassert INIT during bootup
|
|
* 15AP. not affected - worked around in hardware
|
|
* 16AP. not affected - worked around in hardware
|
|
* 17AP. not affected - worked around in hardware
|
|
* 18AP. not affected - worked around in hardware
|
|
* 19AP. not affected - worked around in BIOS
|
|
*
|
|
* If this sounds worrying believe me these bugs are either ___RARE___,
|
|
* or are signal timing bugs worked around in hardware and there's
|
|
* about nothing of note with C stepping upwards.
|
|
*/
|
|
|
|
static atomic_t stopping_cpu = ATOMIC_INIT(-1);
|
|
static bool smp_no_nmi_ipi = false;
|
|
|
|
/*
|
|
* this function sends a 'reschedule' IPI to another CPU.
|
|
* it goes straight through and wastes no time serializing
|
|
* anything. Worst case is that we lose a reschedule ...
|
|
*/
|
|
static void native_smp_send_reschedule(int cpu)
|
|
{
|
|
if (unlikely(cpu_is_offline(cpu))) {
|
|
WARN(1, "sched: Unexpected reschedule of offline CPU#%d!\n", cpu);
|
|
return;
|
|
}
|
|
apic->send_IPI(cpu, RESCHEDULE_VECTOR);
|
|
}
|
|
|
|
void native_send_call_func_single_ipi(int cpu)
|
|
{
|
|
apic->send_IPI(cpu, CALL_FUNCTION_SINGLE_VECTOR);
|
|
}
|
|
|
|
void native_send_call_func_ipi(const struct cpumask *mask)
|
|
{
|
|
cpumask_var_t allbutself;
|
|
|
|
if (!alloc_cpumask_var(&allbutself, GFP_ATOMIC)) {
|
|
apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
|
|
return;
|
|
}
|
|
|
|
cpumask_copy(allbutself, cpu_online_mask);
|
|
__cpumask_clear_cpu(smp_processor_id(), allbutself);
|
|
|
|
if (cpumask_equal(mask, allbutself) &&
|
|
cpumask_equal(cpu_online_mask, cpu_callout_mask))
|
|
apic->send_IPI_allbutself(CALL_FUNCTION_VECTOR);
|
|
else
|
|
apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
|
|
|
|
free_cpumask_var(allbutself);
|
|
}
|
|
|
|
static int smp_stop_nmi_callback(unsigned int val, struct pt_regs *regs)
|
|
{
|
|
/* We are registered on stopping cpu too, avoid spurious NMI */
|
|
if (raw_smp_processor_id() == atomic_read(&stopping_cpu))
|
|
return NMI_HANDLED;
|
|
|
|
cpu_emergency_vmxoff();
|
|
stop_this_cpu(NULL);
|
|
|
|
return NMI_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* this function calls the 'stop' function on all other CPUs in the system.
|
|
*/
|
|
|
|
asmlinkage __visible void smp_reboot_interrupt(void)
|
|
{
|
|
ipi_entering_ack_irq();
|
|
cpu_emergency_vmxoff();
|
|
stop_this_cpu(NULL);
|
|
irq_exit();
|
|
}
|
|
|
|
static void native_stop_other_cpus(int wait)
|
|
{
|
|
unsigned long flags;
|
|
unsigned long timeout;
|
|
|
|
if (reboot_force)
|
|
return;
|
|
|
|
/*
|
|
* Use an own vector here because smp_call_function
|
|
* does lots of things not suitable in a panic situation.
|
|
*/
|
|
|
|
/*
|
|
* We start by using the REBOOT_VECTOR irq.
|
|
* The irq is treated as a sync point to allow critical
|
|
* regions of code on other cpus to release their spin locks
|
|
* and re-enable irqs. Jumping straight to an NMI might
|
|
* accidentally cause deadlocks with further shutdown/panic
|
|
* code. By syncing, we give the cpus up to one second to
|
|
* finish their work before we force them off with the NMI.
|
|
*/
|
|
if (num_online_cpus() > 1) {
|
|
/* did someone beat us here? */
|
|
if (atomic_cmpxchg(&stopping_cpu, -1, safe_smp_processor_id()) != -1)
|
|
return;
|
|
|
|
/* sync above data before sending IRQ */
|
|
wmb();
|
|
|
|
apic->send_IPI_allbutself(REBOOT_VECTOR);
|
|
|
|
/*
|
|
* Don't wait longer than a second if the caller
|
|
* didn't ask us to wait.
|
|
*/
|
|
timeout = USEC_PER_SEC;
|
|
while (num_online_cpus() > 1 && (wait || timeout--))
|
|
udelay(1);
|
|
}
|
|
|
|
/* if the REBOOT_VECTOR didn't work, try with the NMI */
|
|
if ((num_online_cpus() > 1) && (!smp_no_nmi_ipi)) {
|
|
if (register_nmi_handler(NMI_LOCAL, smp_stop_nmi_callback,
|
|
NMI_FLAG_FIRST, "smp_stop"))
|
|
/* Note: we ignore failures here */
|
|
/* Hope the REBOOT_IRQ is good enough */
|
|
goto finish;
|
|
|
|
/* sync above data before sending IRQ */
|
|
wmb();
|
|
|
|
pr_emerg("Shutting down cpus with NMI\n");
|
|
|
|
apic->send_IPI_allbutself(NMI_VECTOR);
|
|
|
|
/*
|
|
* Don't wait longer than a 10 ms if the caller
|
|
* didn't ask us to wait.
|
|
*/
|
|
timeout = USEC_PER_MSEC * 10;
|
|
while (num_online_cpus() > 1 && (wait || timeout--))
|
|
udelay(1);
|
|
}
|
|
|
|
finish:
|
|
local_irq_save(flags);
|
|
disable_local_APIC();
|
|
mcheck_cpu_clear(this_cpu_ptr(&cpu_info));
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/*
|
|
* Reschedule call back. KVM uses this interrupt to force a cpu out of
|
|
* guest mode
|
|
*/
|
|
__visible void __irq_entry smp_reschedule_interrupt(struct pt_regs *regs)
|
|
{
|
|
ack_APIC_irq();
|
|
inc_irq_stat(irq_resched_count);
|
|
kvm_set_cpu_l1tf_flush_l1d();
|
|
|
|
if (trace_resched_ipi_enabled()) {
|
|
/*
|
|
* scheduler_ipi() might call irq_enter() as well, but
|
|
* nested calls are fine.
|
|
*/
|
|
irq_enter();
|
|
trace_reschedule_entry(RESCHEDULE_VECTOR);
|
|
scheduler_ipi();
|
|
trace_reschedule_exit(RESCHEDULE_VECTOR);
|
|
irq_exit();
|
|
return;
|
|
}
|
|
scheduler_ipi();
|
|
}
|
|
|
|
__visible void __irq_entry smp_call_function_interrupt(struct pt_regs *regs)
|
|
{
|
|
ipi_entering_ack_irq();
|
|
trace_call_function_entry(CALL_FUNCTION_VECTOR);
|
|
inc_irq_stat(irq_call_count);
|
|
generic_smp_call_function_interrupt();
|
|
trace_call_function_exit(CALL_FUNCTION_VECTOR);
|
|
exiting_irq();
|
|
}
|
|
|
|
__visible void __irq_entry smp_call_function_single_interrupt(struct pt_regs *r)
|
|
{
|
|
ipi_entering_ack_irq();
|
|
trace_call_function_single_entry(CALL_FUNCTION_SINGLE_VECTOR);
|
|
inc_irq_stat(irq_call_count);
|
|
generic_smp_call_function_single_interrupt();
|
|
trace_call_function_single_exit(CALL_FUNCTION_SINGLE_VECTOR);
|
|
exiting_irq();
|
|
}
|
|
|
|
static int __init nonmi_ipi_setup(char *str)
|
|
{
|
|
smp_no_nmi_ipi = true;
|
|
return 1;
|
|
}
|
|
|
|
__setup("nonmi_ipi", nonmi_ipi_setup);
|
|
|
|
struct smp_ops smp_ops = {
|
|
.smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
|
|
.smp_prepare_cpus = native_smp_prepare_cpus,
|
|
.smp_cpus_done = native_smp_cpus_done,
|
|
|
|
.stop_other_cpus = native_stop_other_cpus,
|
|
#if defined(CONFIG_KEXEC_CORE)
|
|
.crash_stop_other_cpus = kdump_nmi_shootdown_cpus,
|
|
#endif
|
|
.smp_send_reschedule = native_smp_send_reschedule,
|
|
|
|
.cpu_up = native_cpu_up,
|
|
.cpu_die = native_cpu_die,
|
|
.cpu_disable = native_cpu_disable,
|
|
.play_dead = native_play_dead,
|
|
|
|
.send_call_func_ipi = native_send_call_func_ipi,
|
|
.send_call_func_single_ipi = native_send_call_func_single_ipi,
|
|
};
|
|
EXPORT_SYMBOL_GPL(smp_ops);
|