linux_dsm_epyc7002/include/linux/iio/frequency/adf4350.h
Michael Hennerich 0a4510a6cb iio: frequency: adf4350: cast value to unsigned to make code checkers happy
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04 18:36:52 +01:00

129 lines
4.4 KiB
C

/*
* ADF4350/ADF4351 SPI PLL driver
*
* Copyright 2012-2013 Analog Devices Inc.
*
* Licensed under the GPL-2.
*/
#ifndef IIO_PLL_ADF4350_H_
#define IIO_PLL_ADF4350_H_
/* Registers */
#define ADF4350_REG0 0
#define ADF4350_REG1 1
#define ADF4350_REG2 2
#define ADF4350_REG3 3
#define ADF4350_REG4 4
#define ADF4350_REG5 5
/* REG0 Bit Definitions */
#define ADF4350_REG0_FRACT(x) (((x) & 0xFFF) << 3)
#define ADF4350_REG0_INT(x) (((x) & 0xFFFF) << 15)
/* REG1 Bit Definitions */
#define ADF4350_REG1_MOD(x) (((x) & 0xFFF) << 3)
#define ADF4350_REG1_PHASE(x) (((x) & 0xFFF) << 15)
#define ADF4350_REG1_PRESCALER (1 << 27)
/* REG2 Bit Definitions */
#define ADF4350_REG2_COUNTER_RESET_EN (1 << 3)
#define ADF4350_REG2_CP_THREESTATE_EN (1 << 4)
#define ADF4350_REG2_POWER_DOWN_EN (1 << 5)
#define ADF4350_REG2_PD_POLARITY_POS (1 << 6)
#define ADF4350_REG2_LDP_6ns (1 << 7)
#define ADF4350_REG2_LDP_10ns (0 << 7)
#define ADF4350_REG2_LDF_FRACT_N (0 << 8)
#define ADF4350_REG2_LDF_INT_N (1 << 8)
#define ADF4350_REG2_CHARGE_PUMP_CURR_uA(x) (((((x)-312) / 312) & 0xF) << 9)
#define ADF4350_REG2_DOUBLE_BUFF_EN (1 << 13)
#define ADF4350_REG2_10BIT_R_CNT(x) ((x) << 14)
#define ADF4350_REG2_RDIV2_EN (1 << 24)
#define ADF4350_REG2_RMULT2_EN (1 << 25)
#define ADF4350_REG2_MUXOUT(x) ((x) << 26)
#define ADF4350_REG2_NOISE_MODE(x) (((unsigned)(x)) << 29)
#define ADF4350_MUXOUT_THREESTATE 0
#define ADF4350_MUXOUT_DVDD 1
#define ADF4350_MUXOUT_GND 2
#define ADF4350_MUXOUT_R_DIV_OUT 3
#define ADF4350_MUXOUT_N_DIV_OUT 4
#define ADF4350_MUXOUT_ANALOG_LOCK_DETECT 5
#define ADF4350_MUXOUT_DIGITAL_LOCK_DETECT 6
/* REG3 Bit Definitions */
#define ADF4350_REG3_12BIT_CLKDIV(x) ((x) << 3)
#define ADF4350_REG3_12BIT_CLKDIV_MODE(x) ((x) << 16)
#define ADF4350_REG3_12BIT_CSR_EN (1 << 18)
#define ADF4351_REG3_CHARGE_CANCELLATION_EN (1 << 21)
#define ADF4351_REG3_ANTI_BACKLASH_3ns_EN (1 << 22)
#define ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH (1 << 23)
/* REG4 Bit Definitions */
#define ADF4350_REG4_OUTPUT_PWR(x) ((x) << 3)
#define ADF4350_REG4_RF_OUT_EN (1 << 5)
#define ADF4350_REG4_AUX_OUTPUT_PWR(x) ((x) << 6)
#define ADF4350_REG4_AUX_OUTPUT_EN (1 << 8)
#define ADF4350_REG4_AUX_OUTPUT_FUND (1 << 9)
#define ADF4350_REG4_AUX_OUTPUT_DIV (0 << 9)
#define ADF4350_REG4_MUTE_TILL_LOCK_EN (1 << 10)
#define ADF4350_REG4_VCO_PWRDOWN_EN (1 << 11)
#define ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(x) ((x) << 12)
#define ADF4350_REG4_RF_DIV_SEL(x) ((x) << 20)
#define ADF4350_REG4_FEEDBACK_DIVIDED (0 << 23)
#define ADF4350_REG4_FEEDBACK_FUND (1 << 23)
/* REG5 Bit Definitions */
#define ADF4350_REG5_LD_PIN_MODE_LOW (0 << 22)
#define ADF4350_REG5_LD_PIN_MODE_DIGITAL (1 << 22)
#define ADF4350_REG5_LD_PIN_MODE_HIGH (3 << 22)
/* Specifications */
#define ADF4350_MAX_OUT_FREQ 4400000000ULL /* Hz */
#define ADF4350_MIN_OUT_FREQ 137500000 /* Hz */
#define ADF4351_MIN_OUT_FREQ 34375000 /* Hz */
#define ADF4350_MIN_VCO_FREQ 2200000000ULL /* Hz */
#define ADF4350_MAX_FREQ_45_PRESC 3000000000ULL /* Hz */
#define ADF4350_MAX_FREQ_PFD 32000000 /* Hz */
#define ADF4350_MAX_BANDSEL_CLK 125000 /* Hz */
#define ADF4350_MAX_FREQ_REFIN 250000000 /* Hz */
#define ADF4350_MAX_MODULUS 4095
#define ADF4350_MAX_R_CNT 1023
/**
* struct adf4350_platform_data - platform specific information
* @name: Optional device name.
* @clkin: REFin frequency in Hz.
* @channel_spacing: Channel spacing in Hz (influences MODULUS).
* @power_up_frequency: Optional, If set in Hz the PLL tunes to the desired
* frequency on probe.
* @ref_div_factor: Optional, if set the driver skips dynamic calculation
* and uses this default value instead.
* @ref_doubler_en: Enables reference doubler.
* @ref_div2_en: Enables reference divider.
* @r2_user_settings: User defined settings for ADF4350/1 REGISTER_2.
* @r3_user_settings: User defined settings for ADF4350/1 REGISTER_3.
* @r4_user_settings: User defined settings for ADF4350/1 REGISTER_4.
* @gpio_lock_detect: Optional, if set with a valid GPIO number,
* pll lock state is tested upon read.
* If not used - set to -1.
*/
struct adf4350_platform_data {
char name[32];
unsigned long clkin;
unsigned long channel_spacing;
unsigned long long power_up_frequency;
unsigned short ref_div_factor; /* 10-bit R counter */
bool ref_doubler_en;
bool ref_div2_en;
unsigned r2_user_settings;
unsigned r3_user_settings;
unsigned r4_user_settings;
int gpio_lock_detect;
};
#endif /* IIO_PLL_ADF4350_H_ */