mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 07:30:20 +07:00
14f1fa2d0c
This patch enables the (unfortunately undocumented) scaler of the NatSemi 2501 DVO found in the Fujitsu-Siemens S6010 laptop and other machines of the same series and age. Parts of the DVO scaler logic have been revealed by reverse engineering and trial and error, so your milage may vary. The patch (and the whole ns2501 DVO code) is currently only good for the 1024x768 panel of the S6010, and may hopefully work on other machines with the same panel size. The mode-specific configuration of the scaler have been moved out into a separate class, the mode-agnostic settings remain as raw register list as their purpose remains unclear at this point. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Richter <thor@math.tu-berlin.de> [danvet: Make the thing apply and conform to kernel patch expectations.] Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
710 lines
22 KiB
C
710 lines
22 KiB
C
/*
|
|
*
|
|
* Copyright (c) 2012 Gilles Dartiguelongue, Thomas Richter
|
|
*
|
|
* All Rights Reserved.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include "dvo.h"
|
|
#include "i915_reg.h"
|
|
#include "i915_drv.h"
|
|
|
|
#define NS2501_VID 0x1305
|
|
#define NS2501_DID 0x6726
|
|
|
|
#define NS2501_VID_LO 0x00
|
|
#define NS2501_VID_HI 0x01
|
|
#define NS2501_DID_LO 0x02
|
|
#define NS2501_DID_HI 0x03
|
|
#define NS2501_REV 0x04
|
|
#define NS2501_RSVD 0x05
|
|
#define NS2501_FREQ_LO 0x06
|
|
#define NS2501_FREQ_HI 0x07
|
|
|
|
#define NS2501_REG8 0x08
|
|
#define NS2501_8_VEN (1<<5)
|
|
#define NS2501_8_HEN (1<<4)
|
|
#define NS2501_8_DSEL (1<<3)
|
|
#define NS2501_8_BPAS (1<<2)
|
|
#define NS2501_8_RSVD (1<<1)
|
|
#define NS2501_8_PD (1<<0)
|
|
|
|
#define NS2501_REG9 0x09
|
|
#define NS2501_9_VLOW (1<<7)
|
|
#define NS2501_9_MSEL_MASK (0x7<<4)
|
|
#define NS2501_9_TSEL (1<<3)
|
|
#define NS2501_9_RSEN (1<<2)
|
|
#define NS2501_9_RSVD (1<<1)
|
|
#define NS2501_9_MDI (1<<0)
|
|
|
|
#define NS2501_REGC 0x0c
|
|
|
|
/*
|
|
* The following registers are not part of the official datasheet
|
|
* and are the result of reverse engineering.
|
|
*/
|
|
|
|
/*
|
|
* Register c0 controls how the DVO synchronizes with
|
|
* its input.
|
|
*/
|
|
#define NS2501_REGC0 0xc0
|
|
#define NS2501_C0_ENABLE (1<<0) /* enable the DVO sync in general */
|
|
#define NS2501_C0_HSYNC (1<<1) /* synchronize horizontal with input */
|
|
#define NS2501_C0_VSYNC (1<<2) /* synchronize vertical with input */
|
|
#define NS2501_C0_RESET (1<<7) /* reset the synchronization flip/flops */
|
|
|
|
/*
|
|
* Register 41 is somehow related to the sync register and sync
|
|
* configuration. It should be 0x32 whenever regC0 is 0x05 (hsync off)
|
|
* and 0x00 otherwise.
|
|
*/
|
|
#define NS2501_REG41 0x41
|
|
|
|
/*
|
|
* this register controls the dithering of the DVO
|
|
* One bit enables it, the other define the dithering depth.
|
|
* The higher the value, the lower the dithering depth.
|
|
*/
|
|
#define NS2501_F9_REG 0xf9
|
|
#define NS2501_F9_ENABLE (1<<0) /* if set, dithering is enabled */
|
|
#define NS2501_F9_DITHER_MASK (0x7f<<1) /* controls the dither depth */
|
|
#define NS2501_F9_DITHER_SHIFT 1 /* shifts the dither mask */
|
|
|
|
/*
|
|
* PLL configuration register. This is a pair of registers,
|
|
* one single byte register at 1B, and a pair at 1C,1D.
|
|
* These registers are counters/dividers.
|
|
*/
|
|
#define NS2501_REG1B 0x1b /* one byte PLL control register */
|
|
#define NS2501_REG1C 0x1c /* low-part of the second register */
|
|
#define NS2501_REG1D 0x1d /* high-part of the second register */
|
|
|
|
/*
|
|
* Scaler control registers. Horizontal at b8,b9,
|
|
* vertical at 10,11. The scale factor is computed as
|
|
* 2^16/control-value. The low-byte comes first.
|
|
*/
|
|
#define NS2501_REG10 0x10 /* low-byte vertical scaler */
|
|
#define NS2501_REG11 0x11 /* high-byte vertical scaler */
|
|
#define NS2501_REGB8 0xb8 /* low-byte horizontal scaler */
|
|
#define NS2501_REGB9 0xb9 /* high-byte horizontal scaler */
|
|
|
|
/*
|
|
* Display window definition. This consists of four registers
|
|
* per dimension. One register pair defines the start of the
|
|
* display, one the end.
|
|
* As far as I understand, this defines the window within which
|
|
* the scaler samples the input.
|
|
*/
|
|
#define NS2501_REGC1 0xc1 /* low-byte horizontal display start */
|
|
#define NS2501_REGC2 0xc2 /* high-byte horizontal display start */
|
|
#define NS2501_REGC3 0xc3 /* low-byte horizontal display stop */
|
|
#define NS2501_REGC4 0xc4 /* high-byte horizontal display stop */
|
|
#define NS2501_REGC5 0xc5 /* low-byte vertical display start */
|
|
#define NS2501_REGC6 0xc6 /* high-byte vertical display start */
|
|
#define NS2501_REGC7 0xc7 /* low-byte vertical display stop */
|
|
#define NS2501_REGC8 0xc8 /* high-byte vertical display stop */
|
|
|
|
/*
|
|
* The following register pair seems to define the start of
|
|
* the vertical sync. If automatic syncing is enabled, and the
|
|
* register value defines a sync pulse that is later than the
|
|
* incoming sync, then the register value is ignored and the
|
|
* external hsync triggers the synchronization.
|
|
*/
|
|
#define NS2501_REG80 0x80 /* low-byte vsync-start */
|
|
#define NS2501_REG81 0x81 /* high-byte vsync-start */
|
|
|
|
/*
|
|
* The following register pair seems to define the total number
|
|
* of lines created at the output side of the scaler.
|
|
* This is again a low-high register pair.
|
|
*/
|
|
#define NS2501_REG82 0x82 /* output display height, low byte */
|
|
#define NS2501_REG83 0x83 /* output display height, high byte */
|
|
|
|
/*
|
|
* The following registers define the end of the front-porch
|
|
* in horizontal and vertical position and hence allow to shift
|
|
* the image left/right or up/down.
|
|
*/
|
|
#define NS2501_REG98 0x98 /* horizontal start of display + 256, low */
|
|
#define NS2501_REG99 0x99 /* horizontal start of display + 256, high */
|
|
#define NS2501_REG8E 0x8e /* vertical start of the display, low byte */
|
|
#define NS2501_REG8F 0x8f /* vertical start of the display, high byte */
|
|
|
|
/*
|
|
* The following register pair control the function of the
|
|
* backlight and the DVO output. To enable the corresponding
|
|
* function, the corresponding bit must be set in both registers.
|
|
*/
|
|
#define NS2501_REG34 0x34 /* DVO enable functions, first register */
|
|
#define NS2501_REG35 0x35 /* DVO enable functions, second register */
|
|
#define NS2501_34_ENABLE_OUTPUT (1<<0) /* enable DVO output */
|
|
#define NS2501_34_ENABLE_BACKLIGHT (1<<1) /* enable backlight */
|
|
|
|
/*
|
|
* Registers 9C and 9D define the vertical output offset
|
|
* of the visible region.
|
|
*/
|
|
#define NS2501_REG9C 0x9c
|
|
#define NS2501_REG9D 0x9d
|
|
|
|
/*
|
|
* The register 9F defines the dithering. This requires the
|
|
* scaler to be ON. Bit 0 enables dithering, the remaining
|
|
* bits control the depth of the dither. The higher the value,
|
|
* the LOWER the dithering amplitude. A good value seems to be
|
|
* 15 (total register value).
|
|
*/
|
|
#define NS2501_REGF9 0xf9
|
|
#define NS2501_F9_ENABLE_DITHER (1<<0) /* enable dithering */
|
|
#define NS2501_F9_DITHER_MASK (0x7f<<1) /* dither masking */
|
|
#define NS2501_F9_DITHER_SHIFT 1 /* upshift of the dither mask */
|
|
|
|
enum {
|
|
MODE_640x480,
|
|
MODE_800x600,
|
|
MODE_1024x768,
|
|
};
|
|
|
|
struct ns2501_reg {
|
|
uint8_t offset;
|
|
uint8_t value;
|
|
};
|
|
|
|
/*
|
|
* The following structure keeps the complete configuration of
|
|
* the DVO, given a specific output configuration.
|
|
* This is pretty much guess-work from reverse-engineering, so
|
|
* read all this with a grain of salt.
|
|
*/
|
|
struct ns2501_configuration {
|
|
uint8_t sync; /* configuration of the C0 register */
|
|
uint8_t conf; /* configuration register 8 */
|
|
uint8_t syncb; /* configuration register 41 */
|
|
uint8_t dither; /* configuration of the dithering */
|
|
uint8_t pll_a; /* PLL configuration, register A, 1B */
|
|
uint16_t pll_b; /* PLL configuration, register B, 1C/1D */
|
|
uint16_t hstart; /* horizontal start, registers C1/C2 */
|
|
uint16_t hstop; /* horizontal total, registers C3/C4 */
|
|
uint16_t vstart; /* vertical start, registers C5/C6 */
|
|
uint16_t vstop; /* vertical total, registers C7/C8 */
|
|
uint16_t vsync; /* manual vertical sync start, 80/81 */
|
|
uint16_t vtotal; /* number of lines generated, 82/83 */
|
|
uint16_t hpos; /* horizontal position + 256, 98/99 */
|
|
uint16_t vpos; /* vertical position, 8e/8f */
|
|
uint16_t voffs; /* vertical output offset, 9c/9d */
|
|
uint16_t hscale; /* horizontal scaling factor, b8/b9 */
|
|
uint16_t vscale; /* vertical scaling factor, 10/11 */
|
|
};
|
|
|
|
/*
|
|
* DVO configuration values, partially based on what the BIOS
|
|
* of the Fujitsu Lifebook S6010 writes into registers,
|
|
* partially found by manual tweaking. These configurations assume
|
|
* a 1024x768 panel.
|
|
*/
|
|
static const struct ns2501_configuration ns2501_modes[] = {
|
|
[MODE_640x480] = {
|
|
.sync = NS2501_C0_ENABLE | NS2501_C0_VSYNC,
|
|
.conf = NS2501_8_VEN | NS2501_8_HEN | NS2501_8_PD,
|
|
.syncb = 0x32,
|
|
.dither = 0x0f,
|
|
.pll_a = 17,
|
|
.pll_b = 852,
|
|
.hstart = 144,
|
|
.hstop = 783,
|
|
.vstart = 22,
|
|
.vstop = 514,
|
|
.vsync = 2047, /* actually, ignored with this config */
|
|
.vtotal = 1341,
|
|
.hpos = 0,
|
|
.vpos = 16,
|
|
.voffs = 36,
|
|
.hscale = 40960,
|
|
.vscale = 40960
|
|
},
|
|
[MODE_800x600] = {
|
|
.sync = NS2501_C0_ENABLE |
|
|
NS2501_C0_HSYNC | NS2501_C0_VSYNC,
|
|
.conf = NS2501_8_VEN | NS2501_8_HEN | NS2501_8_PD,
|
|
.syncb = 0x00,
|
|
.dither = 0x0f,
|
|
.pll_a = 25,
|
|
.pll_b = 612,
|
|
.hstart = 215,
|
|
.hstop = 1016,
|
|
.vstart = 26,
|
|
.vstop = 627,
|
|
.vsync = 807,
|
|
.vtotal = 1341,
|
|
.hpos = 0,
|
|
.vpos = 4,
|
|
.voffs = 35,
|
|
.hscale = 51248,
|
|
.vscale = 51232
|
|
},
|
|
[MODE_1024x768] = {
|
|
.sync = NS2501_C0_ENABLE | NS2501_C0_VSYNC,
|
|
.conf = NS2501_8_VEN | NS2501_8_HEN | NS2501_8_PD,
|
|
.syncb = 0x32,
|
|
.dither = 0x0f,
|
|
.pll_a = 11,
|
|
.pll_b = 1350,
|
|
.hstart = 276,
|
|
.hstop = 1299,
|
|
.vstart = 15,
|
|
.vstop = 1056,
|
|
.vsync = 2047,
|
|
.vtotal = 1341,
|
|
.hpos = 0,
|
|
.vpos = 7,
|
|
.voffs = 27,
|
|
.hscale = 65535,
|
|
.vscale = 65535
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Other configuration values left by the BIOS of the
|
|
* Fujitsu S6010 in the DVO control registers. Their
|
|
* value does not depend on the BIOS and their meaning
|
|
* is unknown.
|
|
*/
|
|
|
|
static const struct ns2501_reg mode_agnostic_values[] = {
|
|
/* 08 is mode specific */
|
|
[0] = { .offset = 0x0a, .value = 0x81, },
|
|
/* 10,11 are part of the mode specific configuration */
|
|
[1] = { .offset = 0x12, .value = 0x02, },
|
|
[2] = { .offset = 0x18, .value = 0x07, },
|
|
[3] = { .offset = 0x19, .value = 0x00, },
|
|
[4] = { .offset = 0x1a, .value = 0x00, }, /* PLL?, ignored */
|
|
/* 1b,1c,1d are part of the mode specific configuration */
|
|
[5] = { .offset = 0x1e, .value = 0x02, },
|
|
[6] = { .offset = 0x1f, .value = 0x40, },
|
|
[7] = { .offset = 0x20, .value = 0x00, },
|
|
[8] = { .offset = 0x21, .value = 0x00, },
|
|
[9] = { .offset = 0x22, .value = 0x00, },
|
|
[10] = { .offset = 0x23, .value = 0x00, },
|
|
[11] = { .offset = 0x24, .value = 0x00, },
|
|
[12] = { .offset = 0x25, .value = 0x00, },
|
|
[13] = { .offset = 0x26, .value = 0x00, },
|
|
[14] = { .offset = 0x27, .value = 0x00, },
|
|
[15] = { .offset = 0x7e, .value = 0x18, },
|
|
/* 80-84 are part of the mode-specific configuration */
|
|
[16] = { .offset = 0x84, .value = 0x00, },
|
|
[17] = { .offset = 0x85, .value = 0x00, },
|
|
[18] = { .offset = 0x86, .value = 0x00, },
|
|
[19] = { .offset = 0x87, .value = 0x00, },
|
|
[20] = { .offset = 0x88, .value = 0x00, },
|
|
[21] = { .offset = 0x89, .value = 0x00, },
|
|
[22] = { .offset = 0x8a, .value = 0x00, },
|
|
[23] = { .offset = 0x8b, .value = 0x00, },
|
|
[24] = { .offset = 0x8c, .value = 0x10, },
|
|
[25] = { .offset = 0x8d, .value = 0x02, },
|
|
/* 8e,8f are part of the mode-specific configuration */
|
|
[26] = { .offset = 0x90, .value = 0xff, },
|
|
[27] = { .offset = 0x91, .value = 0x07, },
|
|
[28] = { .offset = 0x92, .value = 0xa0, },
|
|
[29] = { .offset = 0x93, .value = 0x02, },
|
|
[30] = { .offset = 0x94, .value = 0x00, },
|
|
[31] = { .offset = 0x95, .value = 0x00, },
|
|
[32] = { .offset = 0x96, .value = 0x05, },
|
|
[33] = { .offset = 0x97, .value = 0x00, },
|
|
/* 98,99 are part of the mode-specific configuration */
|
|
[34] = { .offset = 0x9a, .value = 0x88, },
|
|
[35] = { .offset = 0x9b, .value = 0x00, },
|
|
/* 9c,9d are part of the mode-specific configuration */
|
|
[36] = { .offset = 0x9e, .value = 0x25, },
|
|
[37] = { .offset = 0x9f, .value = 0x03, },
|
|
[38] = { .offset = 0xa0, .value = 0x28, },
|
|
[39] = { .offset = 0xa1, .value = 0x01, },
|
|
[40] = { .offset = 0xa2, .value = 0x28, },
|
|
[41] = { .offset = 0xa3, .value = 0x05, },
|
|
/* register 0xa4 is mode specific, but 0x80..0x84 works always */
|
|
[42] = { .offset = 0xa4, .value = 0x84, },
|
|
[43] = { .offset = 0xa5, .value = 0x00, },
|
|
[44] = { .offset = 0xa6, .value = 0x00, },
|
|
[45] = { .offset = 0xa7, .value = 0x00, },
|
|
[46] = { .offset = 0xa8, .value = 0x00, },
|
|
/* 0xa9 to 0xab are mode specific, but have no visible effect */
|
|
[47] = { .offset = 0xa9, .value = 0x04, },
|
|
[48] = { .offset = 0xaa, .value = 0x70, },
|
|
[49] = { .offset = 0xab, .value = 0x4f, },
|
|
[50] = { .offset = 0xac, .value = 0x00, },
|
|
[51] = { .offset = 0xad, .value = 0x00, },
|
|
[52] = { .offset = 0xb6, .value = 0x09, },
|
|
[53] = { .offset = 0xb7, .value = 0x03, },
|
|
/* b8,b9 are part of the mode-specific configuration */
|
|
[54] = { .offset = 0xba, .value = 0x00, },
|
|
[55] = { .offset = 0xbb, .value = 0x20, },
|
|
[56] = { .offset = 0xf3, .value = 0x90, },
|
|
[57] = { .offset = 0xf4, .value = 0x00, },
|
|
[58] = { .offset = 0xf7, .value = 0x88, },
|
|
/* f8 is mode specific, but the value does not matter */
|
|
[59] = { .offset = 0xf8, .value = 0x0a, },
|
|
[60] = { .offset = 0xf9, .value = 0x00, }
|
|
};
|
|
|
|
static const struct ns2501_reg regs_init[] = {
|
|
[0] = { .offset = 0x35, .value = 0xff, },
|
|
[1] = { .offset = 0x34, .value = 0x00, },
|
|
[2] = { .offset = 0x08, .value = 0x30, },
|
|
};
|
|
|
|
struct ns2501_priv {
|
|
bool quiet;
|
|
const struct ns2501_configuration *conf;
|
|
};
|
|
|
|
#define NSPTR(d) ((NS2501Ptr)(d->DriverPrivate.ptr))
|
|
|
|
/*
|
|
** Read a register from the ns2501.
|
|
** Returns true if successful, false otherwise.
|
|
** If it returns false, it might be wise to enable the
|
|
** DVO with the above function.
|
|
*/
|
|
static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, uint8_t * ch)
|
|
{
|
|
struct ns2501_priv *ns = dvo->dev_priv;
|
|
struct i2c_adapter *adapter = dvo->i2c_bus;
|
|
u8 out_buf[2];
|
|
u8 in_buf[2];
|
|
|
|
struct i2c_msg msgs[] = {
|
|
{
|
|
.addr = dvo->slave_addr,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = out_buf,
|
|
},
|
|
{
|
|
.addr = dvo->slave_addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = in_buf,
|
|
}
|
|
};
|
|
|
|
out_buf[0] = addr;
|
|
out_buf[1] = 0;
|
|
|
|
if (i2c_transfer(adapter, msgs, 2) == 2) {
|
|
*ch = in_buf[0];
|
|
return true;
|
|
}
|
|
|
|
if (!ns->quiet) {
|
|
DRM_DEBUG_KMS
|
|
("Unable to read register 0x%02x from %s:0x%02x.\n", addr,
|
|
adapter->name, dvo->slave_addr);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
** Write a register to the ns2501.
|
|
** Returns true if successful, false otherwise.
|
|
** If it returns false, it might be wise to enable the
|
|
** DVO with the above function.
|
|
*/
|
|
static bool ns2501_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
|
|
{
|
|
struct ns2501_priv *ns = dvo->dev_priv;
|
|
struct i2c_adapter *adapter = dvo->i2c_bus;
|
|
uint8_t out_buf[2];
|
|
|
|
struct i2c_msg msg = {
|
|
.addr = dvo->slave_addr,
|
|
.flags = 0,
|
|
.len = 2,
|
|
.buf = out_buf,
|
|
};
|
|
|
|
out_buf[0] = addr;
|
|
out_buf[1] = ch;
|
|
|
|
if (i2c_transfer(adapter, &msg, 1) == 1) {
|
|
return true;
|
|
}
|
|
|
|
if (!ns->quiet) {
|
|
DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d\n",
|
|
addr, adapter->name, dvo->slave_addr);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/* National Semiconductor 2501 driver for chip on i2c bus
|
|
* scan for the chip on the bus.
|
|
* Hope the VBIOS initialized the PLL correctly so we can
|
|
* talk to it. If not, it will not be seen and not detected.
|
|
* Bummer!
|
|
*/
|
|
static bool ns2501_init(struct intel_dvo_device *dvo,
|
|
struct i2c_adapter *adapter)
|
|
{
|
|
/* this will detect the NS2501 chip on the specified i2c bus */
|
|
struct ns2501_priv *ns;
|
|
unsigned char ch;
|
|
|
|
ns = kzalloc(sizeof(struct ns2501_priv), GFP_KERNEL);
|
|
if (ns == NULL)
|
|
return false;
|
|
|
|
dvo->i2c_bus = adapter;
|
|
dvo->dev_priv = ns;
|
|
ns->quiet = true;
|
|
|
|
if (!ns2501_readb(dvo, NS2501_VID_LO, &ch))
|
|
goto out;
|
|
|
|
if (ch != (NS2501_VID & 0xff)) {
|
|
DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n",
|
|
ch, adapter->name, dvo->slave_addr);
|
|
goto out;
|
|
}
|
|
|
|
if (!ns2501_readb(dvo, NS2501_DID_LO, &ch))
|
|
goto out;
|
|
|
|
if (ch != (NS2501_DID & 0xff)) {
|
|
DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n",
|
|
ch, adapter->name, dvo->slave_addr);
|
|
goto out;
|
|
}
|
|
ns->quiet = false;
|
|
|
|
DRM_DEBUG_KMS("init ns2501 dvo controller successfully!\n");
|
|
|
|
return true;
|
|
|
|
out:
|
|
kfree(ns);
|
|
return false;
|
|
}
|
|
|
|
static enum drm_connector_status ns2501_detect(struct intel_dvo_device *dvo)
|
|
{
|
|
/*
|
|
* This is a Laptop display, it doesn't have hotplugging.
|
|
* Even if not, the detection bit of the 2501 is unreliable as
|
|
* it only works for some display types.
|
|
* It is even more unreliable as the PLL must be active for
|
|
* allowing reading from the chiop.
|
|
*/
|
|
return connector_status_connected;
|
|
}
|
|
|
|
static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
DRM_DEBUG_KMS
|
|
("is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
|
|
mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal);
|
|
|
|
/*
|
|
* Currently, these are all the modes I have data from.
|
|
* More might exist. Unclear how to find the native resolution
|
|
* of the panel in here so we could always accept it
|
|
* by disabling the scaler.
|
|
*/
|
|
if ((mode->hdisplay == 640 && mode->vdisplay == 480 && mode->clock == 25175) ||
|
|
(mode->hdisplay == 800 && mode->vdisplay == 600 && mode->clock == 40000) ||
|
|
(mode->hdisplay == 1024 && mode->vdisplay == 768 && mode->clock == 65000)) {
|
|
return MODE_OK;
|
|
} else {
|
|
return MODE_ONE_SIZE; /* Is this a reasonable error? */
|
|
}
|
|
}
|
|
|
|
static void ns2501_mode_set(struct intel_dvo_device *dvo,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
const struct ns2501_configuration *conf;
|
|
struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
|
|
int mode_idx, i;
|
|
|
|
DRM_DEBUG_KMS
|
|
("set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
|
|
mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal);
|
|
|
|
DRM_DEBUG_KMS("Detailed requested mode settings are:\n"
|
|
"clock : %d kHz\n"
|
|
"hdisplay : %d\n"
|
|
"hblank start : %d\n"
|
|
"hblank end : %d\n"
|
|
"hsync start : %d\n"
|
|
"hsync end : %d\n"
|
|
"htotal : %d\n"
|
|
"hskew : %d\n"
|
|
"vdisplay : %d\n"
|
|
"vblank start : %d\n"
|
|
"hblank end : %d\n"
|
|
"vsync start : %d\n"
|
|
"vsync end : %d\n"
|
|
"vtotal : %d\n",
|
|
adjusted_mode->crtc_clock,
|
|
adjusted_mode->crtc_hdisplay,
|
|
adjusted_mode->crtc_hblank_start,
|
|
adjusted_mode->crtc_hblank_end,
|
|
adjusted_mode->crtc_hsync_start,
|
|
adjusted_mode->crtc_hsync_end,
|
|
adjusted_mode->crtc_htotal,
|
|
adjusted_mode->crtc_hskew,
|
|
adjusted_mode->crtc_vdisplay,
|
|
adjusted_mode->crtc_vblank_start,
|
|
adjusted_mode->crtc_vblank_end,
|
|
adjusted_mode->crtc_vsync_start,
|
|
adjusted_mode->crtc_vsync_end,
|
|
adjusted_mode->crtc_vtotal);
|
|
|
|
if (mode->hdisplay == 640 && mode->vdisplay == 480)
|
|
mode_idx = MODE_640x480;
|
|
else if (mode->hdisplay == 800 && mode->vdisplay == 600)
|
|
mode_idx = MODE_800x600;
|
|
else if (mode->hdisplay == 1024 && mode->vdisplay == 768)
|
|
mode_idx = MODE_1024x768;
|
|
else
|
|
return;
|
|
|
|
/* Hopefully doing it every time won't hurt... */
|
|
for (i = 0; i < ARRAY_SIZE(regs_init); i++)
|
|
ns2501_writeb(dvo, regs_init[i].offset, regs_init[i].value);
|
|
|
|
/* Write the mode-agnostic values */
|
|
for (i = 0; i < ARRAY_SIZE(mode_agnostic_values); i++)
|
|
ns2501_writeb(dvo, mode_agnostic_values[i].offset,
|
|
mode_agnostic_values[i].value);
|
|
|
|
/* Write now the mode-specific configuration */
|
|
conf = ns2501_modes + mode_idx;
|
|
ns->conf = conf;
|
|
|
|
ns2501_writeb(dvo, NS2501_REG8, conf->conf);
|
|
ns2501_writeb(dvo, NS2501_REG1B, conf->pll_a);
|
|
ns2501_writeb(dvo, NS2501_REG1C, conf->pll_b & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REG1D, conf->pll_b >> 8);
|
|
ns2501_writeb(dvo, NS2501_REGC1, conf->hstart & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REGC2, conf->hstart >> 8);
|
|
ns2501_writeb(dvo, NS2501_REGC3, conf->hstop & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REGC4, conf->hstop >> 8);
|
|
ns2501_writeb(dvo, NS2501_REGC5, conf->vstart & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REGC6, conf->vstart >> 8);
|
|
ns2501_writeb(dvo, NS2501_REGC7, conf->vstop & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REGC8, conf->vstop >> 8);
|
|
ns2501_writeb(dvo, NS2501_REG80, conf->vsync & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REG81, conf->vsync >> 8);
|
|
ns2501_writeb(dvo, NS2501_REG82, conf->vtotal & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REG83, conf->vtotal >> 8);
|
|
ns2501_writeb(dvo, NS2501_REG98, conf->hpos & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REG99, conf->hpos >> 8);
|
|
ns2501_writeb(dvo, NS2501_REG8E, conf->vpos & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REG8F, conf->vpos >> 8);
|
|
ns2501_writeb(dvo, NS2501_REG9C, conf->voffs & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REG9D, conf->voffs >> 8);
|
|
ns2501_writeb(dvo, NS2501_REGB8, conf->hscale & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REGB9, conf->hscale >> 8);
|
|
ns2501_writeb(dvo, NS2501_REG10, conf->vscale & 0xff);
|
|
ns2501_writeb(dvo, NS2501_REG11, conf->vscale >> 8);
|
|
ns2501_writeb(dvo, NS2501_REGF9, conf->dither);
|
|
ns2501_writeb(dvo, NS2501_REG41, conf->syncb);
|
|
ns2501_writeb(dvo, NS2501_REGC0, conf->sync);
|
|
}
|
|
|
|
/* set the NS2501 power state */
|
|
static bool ns2501_get_hw_state(struct intel_dvo_device *dvo)
|
|
{
|
|
unsigned char ch;
|
|
|
|
if (!ns2501_readb(dvo, NS2501_REG8, &ch))
|
|
return false;
|
|
|
|
return ch & NS2501_8_PD;
|
|
}
|
|
|
|
/* set the NS2501 power state */
|
|
static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable)
|
|
{
|
|
struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
|
|
|
|
DRM_DEBUG_KMS("Trying set the dpms of the DVO to %i\n", enable);
|
|
|
|
if (enable) {
|
|
ns2501_writeb(dvo, NS2501_REGC0, ns->conf->sync | 0x08);
|
|
|
|
ns2501_writeb(dvo, NS2501_REG41, ns->conf->syncb);
|
|
|
|
ns2501_writeb(dvo, NS2501_REG34, NS2501_34_ENABLE_OUTPUT);
|
|
msleep(15);
|
|
|
|
ns2501_writeb(dvo, NS2501_REG8,
|
|
ns->conf->conf | NS2501_8_BPAS);
|
|
if (!(ns->conf->conf & NS2501_8_BPAS))
|
|
ns2501_writeb(dvo, NS2501_REG8, ns->conf->conf);
|
|
msleep(200);
|
|
|
|
ns2501_writeb(dvo, NS2501_REG34,
|
|
NS2501_34_ENABLE_OUTPUT | NS2501_34_ENABLE_BACKLIGHT);
|
|
|
|
ns2501_writeb(dvo, NS2501_REGC0, ns->conf->sync);
|
|
} else {
|
|
ns2501_writeb(dvo, NS2501_REG34, NS2501_34_ENABLE_OUTPUT);
|
|
msleep(200);
|
|
|
|
ns2501_writeb(dvo, NS2501_REG8, NS2501_8_VEN | NS2501_8_HEN |
|
|
NS2501_8_BPAS);
|
|
msleep(15);
|
|
|
|
ns2501_writeb(dvo, NS2501_REG34, 0x00);
|
|
}
|
|
}
|
|
|
|
static void ns2501_destroy(struct intel_dvo_device *dvo)
|
|
{
|
|
struct ns2501_priv *ns = dvo->dev_priv;
|
|
|
|
if (ns) {
|
|
kfree(ns);
|
|
dvo->dev_priv = NULL;
|
|
}
|
|
}
|
|
|
|
struct intel_dvo_dev_ops ns2501_ops = {
|
|
.init = ns2501_init,
|
|
.detect = ns2501_detect,
|
|
.mode_valid = ns2501_mode_valid,
|
|
.mode_set = ns2501_mode_set,
|
|
.dpms = ns2501_dpms,
|
|
.get_hw_state = ns2501_get_hw_state,
|
|
.destroy = ns2501_destroy,
|
|
};
|