mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-27 00:10:51 +07:00
762227721f
The earlier deployed LIS3LV02DL driver had already defined a few DT bindings that need to be supported by the new more generic driver and listed as compatible but deprecated bindings in the documentation. After this we can start to activate the new driver with the old systems where applicable. As part of this enablement: make us depend on the old drivers not being in use so we don't get a kernel with two competing drivers. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
71 lines
1.9 KiB
Plaintext
71 lines
1.9 KiB
Plaintext
STMicroelectronics MEMS sensors
|
|
|
|
The STMicroelectronics sensor devices are pretty straight-forward I2C or
|
|
SPI devices, all sharing the same device tree descriptions no matter what
|
|
type of sensor it is.
|
|
|
|
Required properties:
|
|
- compatible: see the list of valid compatible strings below
|
|
- reg: the I2C or SPI address the device will respond to
|
|
|
|
Optional properties:
|
|
- vdd-supply: an optional regulator that needs to be on to provide VDD
|
|
power to the sensor.
|
|
- vddio-supply: an optional regulator that needs to be on to provide the
|
|
VDD IO power to the sensor.
|
|
- st,drdy-int-pin: the pin on the package that will be used to signal
|
|
"data ready" (valid values: 1 or 2). This property is not configurable
|
|
on all sensors.
|
|
- drive-open-drain: the interrupt/data ready line will be configured
|
|
as open drain, which is useful if several sensors share the same
|
|
interrupt line. (This binding is taken from pinctrl/pinctrl-bindings.txt)
|
|
This is a boolean property.
|
|
|
|
Sensors may also have applicable pin control settings, those use the
|
|
standard bindings from pinctrl/pinctrl-bindings.txt.
|
|
|
|
Valid compatible strings:
|
|
|
|
Accelerometers:
|
|
- st,lis3lv02d (deprecated, use st,lis3lv02dl-accel)
|
|
- st,lis302dl-spi (deprecated, use st,lis3lv02dl-accel)
|
|
- st,lis3lv02dl-accel
|
|
- st,lsm303dlh-accel
|
|
- st,lsm303dlhc-accel
|
|
- st,lis3dh-accel
|
|
- st,lsm330d-accel
|
|
- st,lsm330dl-accel
|
|
- st,lsm330dlc-accel
|
|
- st,lis331dl-accel
|
|
- st,lis331dlh-accel
|
|
- st,lsm303dl-accel
|
|
- st,lsm303dlm-accel
|
|
- st,lsm330-accel
|
|
- st,lsm303agr-accel
|
|
- st,lis2dh12-accel
|
|
- st,h3lis331dl-accel
|
|
- st,lng2dm-accel
|
|
|
|
Gyroscopes:
|
|
- st,l3g4200d-gyro
|
|
- st,lsm330d-gyro
|
|
- st,lsm330dl-gyro
|
|
- st,lsm330dlc-gyro
|
|
- st,l3gd20-gyro
|
|
- st,l3g4is-gyro
|
|
- st,lsm330-gyro
|
|
- st,lsm9ds0-gyro
|
|
|
|
Magnetometers:
|
|
- st,lsm303agr-magn
|
|
- st,lsm303dlh-magn
|
|
- st,lsm303dlhc-magn
|
|
- st,lsm303dlm-magn
|
|
- st,lis3mdl-magn
|
|
|
|
Pressure sensors:
|
|
- st,lps001wp-press
|
|
- st,lps25h-press
|
|
- st,lps331ap-press
|
|
- st,lps22hb-press
|