mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 09:35:25 +07:00
bc27360b3c
Changes from v1->v2:
Add 'select RESET_CONTROLLER' under COMMON_CLK_MEDIATEK and enable
reset.c to be built when COMMON_CLK_MEDIATEK is selected. That should
be quite reasonable because the reset controller is tightly embedded
inside and exported from these clock subsystems. At least it can be found
on infracfg and pericfg subsystem that both are really fundamental block
lots of devices must depend on.
commit 74cb0d6dde
("clk: mediatek: fixup test-building of MediaTek clock
drivers") can let the build system looking into the directory where the
clock drivers resides and then allow test-building the drivers.
But the change also gives rise to certain incorrect behavior which is
reset.c being built even not depending on either COMPILE_TEST or
ARCH_MEDIATEK alternative dependency. To get rid of reset.c being built
unexpectedly on the other platforms, it would be a good change that the
file should be built depending on its own specific configuration rather
than just on generic RESET_CONTROLLER one.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
236 lines
5.6 KiB
C
236 lines
5.6 KiB
C
/*
|
|
* Copyright (c) 2014 MediaTek Inc.
|
|
* Author: James Liao <jamesjj.liao@mediatek.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#ifndef __DRV_CLK_MTK_H
|
|
#define __DRV_CLK_MTK_H
|
|
|
|
#include <linux/regmap.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk-provider.h>
|
|
|
|
struct clk;
|
|
struct clk_onecell_data;
|
|
|
|
#define MAX_MUX_GATE_BIT 31
|
|
#define INVALID_MUX_GATE_BIT (MAX_MUX_GATE_BIT + 1)
|
|
|
|
#define MHZ (1000 * 1000)
|
|
|
|
struct mtk_fixed_clk {
|
|
int id;
|
|
const char *name;
|
|
const char *parent;
|
|
unsigned long rate;
|
|
};
|
|
|
|
#define FIXED_CLK(_id, _name, _parent, _rate) { \
|
|
.id = _id, \
|
|
.name = _name, \
|
|
.parent = _parent, \
|
|
.rate = _rate, \
|
|
}
|
|
|
|
void mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks,
|
|
int num, struct clk_onecell_data *clk_data);
|
|
|
|
struct mtk_fixed_factor {
|
|
int id;
|
|
const char *name;
|
|
const char *parent_name;
|
|
int mult;
|
|
int div;
|
|
};
|
|
|
|
#define FACTOR(_id, _name, _parent, _mult, _div) { \
|
|
.id = _id, \
|
|
.name = _name, \
|
|
.parent_name = _parent, \
|
|
.mult = _mult, \
|
|
.div = _div, \
|
|
}
|
|
|
|
void mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
|
|
int num, struct clk_onecell_data *clk_data);
|
|
|
|
struct mtk_composite {
|
|
int id;
|
|
const char *name;
|
|
const char * const *parent_names;
|
|
const char *parent;
|
|
unsigned flags;
|
|
|
|
uint32_t mux_reg;
|
|
uint32_t divider_reg;
|
|
uint32_t gate_reg;
|
|
|
|
signed char mux_shift;
|
|
signed char mux_width;
|
|
signed char gate_shift;
|
|
|
|
signed char divider_shift;
|
|
signed char divider_width;
|
|
|
|
signed char num_parents;
|
|
};
|
|
|
|
/*
|
|
* In case the rate change propagation to parent clocks is undesirable,
|
|
* this macro allows to specify the clock flags manually.
|
|
*/
|
|
#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, \
|
|
_gate, _flags) { \
|
|
.id = _id, \
|
|
.name = _name, \
|
|
.mux_reg = _reg, \
|
|
.mux_shift = _shift, \
|
|
.mux_width = _width, \
|
|
.gate_reg = _reg, \
|
|
.gate_shift = _gate, \
|
|
.divider_shift = -1, \
|
|
.parent_names = _parents, \
|
|
.num_parents = ARRAY_SIZE(_parents), \
|
|
.flags = _flags, \
|
|
}
|
|
|
|
/*
|
|
* Unless necessary, all MUX_GATE clocks propagate rate changes to their
|
|
* parent clock by default.
|
|
*/
|
|
#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) \
|
|
MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, \
|
|
_gate, CLK_SET_RATE_PARENT)
|
|
|
|
#define MUX(_id, _name, _parents, _reg, _shift, _width) { \
|
|
.id = _id, \
|
|
.name = _name, \
|
|
.mux_reg = _reg, \
|
|
.mux_shift = _shift, \
|
|
.mux_width = _width, \
|
|
.gate_shift = -1, \
|
|
.divider_shift = -1, \
|
|
.parent_names = _parents, \
|
|
.num_parents = ARRAY_SIZE(_parents), \
|
|
.flags = CLK_SET_RATE_PARENT, \
|
|
}
|
|
|
|
#define DIV_GATE(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, \
|
|
_div_width, _div_shift) { \
|
|
.id = _id, \
|
|
.parent = _parent, \
|
|
.name = _name, \
|
|
.divider_reg = _div_reg, \
|
|
.divider_shift = _div_shift, \
|
|
.divider_width = _div_width, \
|
|
.gate_reg = _gate_reg, \
|
|
.gate_shift = _gate_shift, \
|
|
.mux_shift = -1, \
|
|
.flags = 0, \
|
|
}
|
|
|
|
struct clk *mtk_clk_register_composite(const struct mtk_composite *mc,
|
|
void __iomem *base, spinlock_t *lock);
|
|
|
|
void mtk_clk_register_composites(const struct mtk_composite *mcs,
|
|
int num, void __iomem *base, spinlock_t *lock,
|
|
struct clk_onecell_data *clk_data);
|
|
|
|
struct mtk_gate_regs {
|
|
u32 sta_ofs;
|
|
u32 clr_ofs;
|
|
u32 set_ofs;
|
|
};
|
|
|
|
struct mtk_gate {
|
|
int id;
|
|
const char *name;
|
|
const char *parent_name;
|
|
const struct mtk_gate_regs *regs;
|
|
int shift;
|
|
const struct clk_ops *ops;
|
|
};
|
|
|
|
int mtk_clk_register_gates(struct device_node *node,
|
|
const struct mtk_gate *clks, int num,
|
|
struct clk_onecell_data *clk_data);
|
|
|
|
struct mtk_clk_divider {
|
|
int id;
|
|
const char *name;
|
|
const char *parent_name;
|
|
unsigned long flags;
|
|
|
|
u32 div_reg;
|
|
unsigned char div_shift;
|
|
unsigned char div_width;
|
|
unsigned char clk_divider_flags;
|
|
const struct clk_div_table *clk_div_table;
|
|
};
|
|
|
|
#define DIV_ADJ(_id, _name, _parent, _reg, _shift, _width) { \
|
|
.id = _id, \
|
|
.name = _name, \
|
|
.parent_name = _parent, \
|
|
.div_reg = _reg, \
|
|
.div_shift = _shift, \
|
|
.div_width = _width, \
|
|
}
|
|
|
|
void mtk_clk_register_dividers(const struct mtk_clk_divider *mcds,
|
|
int num, void __iomem *base, spinlock_t *lock,
|
|
struct clk_onecell_data *clk_data);
|
|
|
|
struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num);
|
|
|
|
#define HAVE_RST_BAR BIT(0)
|
|
#define PLL_AO BIT(1)
|
|
|
|
struct mtk_pll_div_table {
|
|
u32 div;
|
|
unsigned long freq;
|
|
};
|
|
|
|
struct mtk_pll_data {
|
|
int id;
|
|
const char *name;
|
|
uint32_t reg;
|
|
uint32_t pwr_reg;
|
|
uint32_t en_mask;
|
|
uint32_t pd_reg;
|
|
uint32_t tuner_reg;
|
|
uint32_t tuner_en_reg;
|
|
uint8_t tuner_en_bit;
|
|
int pd_shift;
|
|
unsigned int flags;
|
|
const struct clk_ops *ops;
|
|
u32 rst_bar_mask;
|
|
unsigned long fmax;
|
|
int pcwbits;
|
|
uint32_t pcw_reg;
|
|
int pcw_shift;
|
|
const struct mtk_pll_div_table *div_table;
|
|
const char *parent_name;
|
|
};
|
|
|
|
void mtk_clk_register_plls(struct device_node *node,
|
|
const struct mtk_pll_data *plls, int num_plls,
|
|
struct clk_onecell_data *clk_data);
|
|
|
|
struct clk *mtk_clk_register_ref2usb_tx(const char *name,
|
|
const char *parent_name, void __iomem *reg);
|
|
|
|
void mtk_register_reset_controller(struct device_node *np,
|
|
unsigned int num_regs, int regofs);
|
|
|
|
#endif /* __DRV_CLK_MTK_H */
|