mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 22:23:44 +07:00
4e461e62fc
Update the "gpio-ranges" property of the CBUS GPIO controller on Meson8b because it only provides 83 GPIOs. The GPIO definitions in include/dt-bindings/gpio/meson8b-gpio.h inherited all GPIOs from Meson8 until recently. However, Meson8b does not support all GPIOs which are supported by Meson8 (Meson8b doesn't have a GPIOZ bank, most of the pins from the GPIODV bank are missing on Meson8b - just to name a few differences). The actual number of GPIOs is only 83, instead of 120 from Meson8 plus the 10 GPIOs from the DIF bank on Meson8b. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
356 lines
8.4 KiB
Plaintext
356 lines
8.4 KiB
Plaintext
/*
|
|
* Copyright 2015 Endless Mobile, Inc.
|
|
* Author: Carlo Caione <carlo@endlessm.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/meson8b-clkc.h>
|
|
#include <dt-bindings/gpio/meson8b-gpio.h>
|
|
#include <dt-bindings/reset/amlogic,meson8b-reset.h>
|
|
#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
|
|
#include "meson.dtsi"
|
|
|
|
/ {
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@200 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a5";
|
|
next-level-cache = <&L2>;
|
|
reg = <0x200>;
|
|
enable-method = "amlogic,meson8b-smp";
|
|
resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
|
|
};
|
|
|
|
cpu@201 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a5";
|
|
next-level-cache = <&L2>;
|
|
reg = <0x201>;
|
|
enable-method = "amlogic,meson8b-smp";
|
|
resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
|
|
};
|
|
|
|
cpu@202 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a5";
|
|
next-level-cache = <&L2>;
|
|
reg = <0x202>;
|
|
enable-method = "amlogic,meson8b-smp";
|
|
resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
|
|
};
|
|
|
|
cpu@203 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a5";
|
|
next-level-cache = <&L2>;
|
|
reg = <0x203>;
|
|
enable-method = "amlogic,meson8b-smp";
|
|
resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
/* 2 MiB reserved for Hardware ROM Firmware? */
|
|
hwrom@0 {
|
|
reg = <0x0 0x200000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
scu@c4300000 {
|
|
compatible = "arm,cortex-a5-scu";
|
|
reg = <0xc4300000 0x100>;
|
|
};
|
|
}; /* end of / */
|
|
|
|
&aobus {
|
|
pmu: pmu@e0 {
|
|
compatible = "amlogic,meson8b-pmu", "syscon";
|
|
reg = <0xe0 0x18>;
|
|
};
|
|
|
|
pinctrl_aobus: pinctrl@84 {
|
|
compatible = "amlogic,meson8b-aobus-pinctrl";
|
|
reg = <0x84 0xc>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gpio_ao: ao-bank@14 {
|
|
reg = <0x14 0x4>,
|
|
<0x2c 0x4>,
|
|
<0x24 0x8>;
|
|
reg-names = "mux", "pull", "gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pinctrl_aobus 0 0 16>;
|
|
};
|
|
|
|
uart_ao_a_pins: uart_ao_a {
|
|
mux {
|
|
groups = "uart_tx_ao_a", "uart_rx_ao_a";
|
|
function = "uart_ao";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&cbus {
|
|
clkc: clock-controller@4000 {
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
compatible = "amlogic,meson8b-clkc";
|
|
reg = <0x8000 0x4>, <0x4000 0x460>;
|
|
};
|
|
|
|
reset: reset-controller@4404 {
|
|
compatible = "amlogic,meson8b-reset";
|
|
reg = <0x4404 0x9c>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
analog_top: analog-top@81a8 {
|
|
compatible = "amlogic,meson8b-analog-top", "syscon";
|
|
reg = <0x81a8 0x14>;
|
|
};
|
|
|
|
pwm_ef: pwm@86c0 {
|
|
compatible = "amlogic,meson8b-pwm";
|
|
reg = <0x86c0 0x10>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl_cbus: pinctrl@9880 {
|
|
compatible = "amlogic,meson8b-cbus-pinctrl";
|
|
reg = <0x9880 0x10>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gpio: banks@80b0 {
|
|
reg = <0x80b0 0x28>,
|
|
<0x80e8 0x18>,
|
|
<0x8120 0x18>,
|
|
<0x8030 0x38>;
|
|
reg-names = "mux", "pull", "pull-enable", "gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pinctrl_cbus 0 0 83>;
|
|
};
|
|
|
|
eth_rgmii_pins: eth-rgmii {
|
|
mux {
|
|
groups = "eth_tx_clk",
|
|
"eth_tx_en",
|
|
"eth_txd1_0",
|
|
"eth_txd1_1",
|
|
"eth_txd0_0",
|
|
"eth_txd0_1",
|
|
"eth_rx_clk",
|
|
"eth_rx_dv",
|
|
"eth_rxd1",
|
|
"eth_rxd0",
|
|
"eth_mdio_en",
|
|
"eth_mdc",
|
|
"eth_ref_clk",
|
|
"eth_txd2",
|
|
"eth_txd3";
|
|
function = "ethernet";
|
|
};
|
|
};
|
|
|
|
sd_b_pins: sd-b {
|
|
mux {
|
|
groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
|
|
"sd_d3_b", "sd_clk_b", "sd_cmd_b";
|
|
function = "sd_b";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ahb_sram {
|
|
smp-sram@1ff80 {
|
|
compatible = "amlogic,meson8b-smp-sram";
|
|
reg = <0x1ff80 0x8>;
|
|
};
|
|
};
|
|
|
|
|
|
&efuse {
|
|
compatible = "amlogic,meson8b-efuse";
|
|
clocks = <&clkc CLKID_EFUSE>;
|
|
clock-names = "core";
|
|
};
|
|
|
|
ðmac {
|
|
compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac";
|
|
|
|
reg = <0xc9410000 0x10000
|
|
0xc1108140 0x4>;
|
|
|
|
clocks = <&clkc CLKID_ETH>,
|
|
<&clkc CLKID_MPLL2>,
|
|
<&clkc CLKID_MPLL2>;
|
|
clock-names = "stmmaceth", "clkin0", "clkin1";
|
|
|
|
resets = <&reset RESET_ETHERNET>;
|
|
reset-names = "stmmaceth";
|
|
};
|
|
|
|
&gpio_intc {
|
|
compatible = "amlogic,meson-gpio-intc",
|
|
"amlogic,meson8b-gpio-intc";
|
|
status = "okay";
|
|
};
|
|
|
|
&hwrng {
|
|
compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
|
|
clocks = <&clkc CLKID_RNG0>;
|
|
clock-names = "core";
|
|
};
|
|
|
|
&i2c_AO {
|
|
clocks = <&clkc CLKID_CLK81>;
|
|
};
|
|
|
|
&i2c_A {
|
|
clocks = <&clkc CLKID_I2C>;
|
|
};
|
|
|
|
&i2c_B {
|
|
clocks = <&clkc CLKID_I2C>;
|
|
};
|
|
|
|
&L2 {
|
|
arm,data-latency = <3 3 3>;
|
|
arm,tag-latency = <2 2 2>;
|
|
arm,filter-ranges = <0x100000 0xc0000000>;
|
|
prefetch-data = <1>;
|
|
prefetch-instr = <1>;
|
|
arm,shared-override;
|
|
};
|
|
|
|
&pwm_ab {
|
|
compatible = "amlogic,meson8b-pwm";
|
|
};
|
|
|
|
&pwm_cd {
|
|
compatible = "amlogic,meson8b-pwm";
|
|
};
|
|
|
|
&saradc {
|
|
compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
|
|
clocks = <&clkc CLKID_XTAL>,
|
|
<&clkc CLKID_SAR_ADC>;
|
|
clock-names = "clkin", "core";
|
|
};
|
|
|
|
&sdio {
|
|
compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
|
|
clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
|
|
clock-names = "core", "clkin";
|
|
};
|
|
|
|
&uart_AO {
|
|
compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
|
|
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
|
|
clock-names = "baud", "xtal", "pclk";
|
|
};
|
|
|
|
&uart_A {
|
|
compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
|
|
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
|
|
clock-names = "baud", "xtal", "pclk";
|
|
};
|
|
|
|
&uart_B {
|
|
compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
|
|
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
|
|
clock-names = "baud", "xtal", "pclk";
|
|
};
|
|
|
|
&uart_C {
|
|
compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
|
|
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
|
|
clock-names = "baud", "xtal", "pclk";
|
|
};
|
|
|
|
&usb0 {
|
|
compatible = "amlogic,meson8b-usb", "snps,dwc2";
|
|
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
|
|
clock-names = "otg";
|
|
};
|
|
|
|
&usb1 {
|
|
compatible = "amlogic,meson8b-usb", "snps,dwc2";
|
|
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
|
|
clock-names = "otg";
|
|
};
|
|
|
|
&usb0_phy {
|
|
compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
|
|
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
|
|
clock-names = "usb_general", "usb";
|
|
resets = <&reset RESET_USB_OTG>;
|
|
};
|
|
|
|
&usb1_phy {
|
|
compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
|
|
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
|
|
clock-names = "usb_general", "usb";
|
|
resets = <&reset RESET_USB_OTG>;
|
|
};
|
|
|
|
&wdt {
|
|
compatible = "amlogic,meson8b-wdt";
|
|
};
|