AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-18 21:56:46 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
07c8d21d08
linux_dsm_epyc7002/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
Fabio Estevam edc0581978 ARM: dts: imx6: Pass memory unit-adress 
Pass the memory unit-adress to fix the following build warnings with W=1:

Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name

There are cases where dts passes an empty memory node, which will be filled
by the bootloader. Passing the memory base address still allows the
bootloader to fill the memory size.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-28 09:48:05 +08:00

336 lines
8.2 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2013,2014 Russell King
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
/* Will be filled by the bootloader */
memory@10000000 {
reg = <0x10000000 0>;
};
chosen {
stdout-path = &uart1;
};
ir_recv: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
};
v_3v2: regulator-v-3v2 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "v_3v2";
vin-supply = <&v_5v0>;
};
v_5v0: regulator-v-5v0 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "v_5v0";
};
v_sd: regulator-v-sd {
compatible = "regulator-fixed";
gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "v_sd";
startup-delay-us = <1000>;
vin-supply = <&v_3v2>;
};
v_usb2: regulator-v-usb2 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "v_usb2";
vin-supply = <&v_5v0>;
};
v_usb1: regulator-v-usb1 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "v_usb1";
vin-supply = <&v_5v0>;
};
sound-sgtl5000 {
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
compatible = "fsl,imx-audio-sgtl5000";
model = "On-board Codec";
mux-ext-port = <5>;
mux-int-port = <1>;
ssi-controller = <&ssi1>;
};
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "On-board SPDIF";
/* IMX6 doesn't implement this yet */
spdif-controller = <&spdif>;
spdif-out;
};
};
&audmux {
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
status = "okay";
};
&hdmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
status = "okay";
/* Pro baseboard model */
rtc@68 {
compatible = "nxp,pcf8523";
reg = <0x68>;
};
/* Pro baseboard model */
sgtl5000: codec@a {
clocks = <&clks IMX6QDL_CLK_CKO>;
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
reg = <0x0a>;
VDDA-supply = <&v_3v2>;
VDDIO-supply = <&v_3v2>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
status = "okay";
};
&iomuxc {
hummingboard {
pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
fsl,pins = <
MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
>;
};
pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
fsl,pins = <
MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
>;
};
pinctrl_hummingboard_hdmi: hummingboard-hdmi {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
>;
};
pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset {
fsl,pins = <
MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
>;
};
pinctrl_hummingboard_pwm1: pwm1grp {
fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
};
pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
pinctrl_hummingboard_spdif: hummingboard-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
};
pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
/*
* We want it pulled down for a fixed host connection.
*/
fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>;
};
pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
};
pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
fsl,pins = <
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
>;
};
pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
>;
};
pinctrl_hummingboard_vmmc: hummingboard-vmmc {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
>;
};
};
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
status = "okay";
};
&pwm2 {
pinctrl-names = "default";
status = "okay";
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_spdif>;
status = "okay";
};
&ssi1 {
status = "okay";
};
&usbh1 {
disable-over-current;
vbus-supply = <&v_usb2>;
status = "okay";
};
&usbotg {
disable-over-current;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
vbus-supply = <&v_usb1>;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <
&pinctrl_hummingboard_usdhc2_aux
&pinctrl_hummingboard_usdhc2
>;
vmmc-supply = <&v_sd>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
&vcc_3v3 {
vin-supply = <&v_3v2>;
};
Reference in New Issue View Git Blame Copy Permalink