mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
39facfa01c
This patch adds role switch support for R-Car SoCs into the USB 3.0 peripheral driver. Some R-Car SoCs (e.g. R-Car H3) have USB 3.0 dual-role device controller which has the USB 3.0 xHCI host and Renesas USB 3.0 peripheral. Unfortunately, the mode change register (DRD_CON) contains the USB 3.0 peripheral controller side only. So, this renesas_usb3 driver manages the DRD_CON now. However, in peripheral mode, the host should stop. Also the host hardware needs to reinitialize its own registers when the mode changes from peripheral to host mode. Otherwise, the host cannot work correctly (e.g. detect a device as high-speed). To achieve this reinitialization by a driver, this driver also registers a role switch driver to manage the DRD_CON and get a device pointer of usb 3.0 host from "companion" property of OF. Then, when the usb role is changed, renesas_usb3_role_switch_set() will attach/release the xhci-plat driver to reinitialize the host hardware. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
474 lines
16 KiB
Plaintext
474 lines
16 KiB
Plaintext
#
|
|
# USB Gadget support on a system involves
|
|
# (a) a peripheral controller, and
|
|
# (b) the gadget driver using it.
|
|
#
|
|
# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
|
|
#
|
|
# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
|
|
# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
|
|
# - Some systems have both kinds of controllers.
|
|
#
|
|
# With help from a special transceiver and a "Mini-AB" jack, systems with
|
|
# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
|
|
#
|
|
|
|
#
|
|
# USB Peripheral Controller Support
|
|
#
|
|
# The order here is alphabetical, except that integrated controllers go
|
|
# before discrete ones so they will be the initial/default value:
|
|
# - integrated/SOC controllers first
|
|
# - licensed IP used in both SOC and discrete versions
|
|
# - discrete ones (including all PCI-only controllers)
|
|
# - debug/dummy gadget+hcd is last.
|
|
#
|
|
menu "USB Peripheral Controller"
|
|
|
|
#
|
|
# Integrated controllers
|
|
#
|
|
|
|
config USB_AT91
|
|
tristate "Atmel AT91 USB Device Port"
|
|
depends on ARCH_AT91
|
|
depends on OF || COMPILE_TEST
|
|
help
|
|
Many Atmel AT91 processors (such as the AT91RM2000) have a
|
|
full speed USB Device Port with support for five configurable
|
|
endpoints (plus endpoint zero).
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "at91_udc" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_LPC32XX
|
|
tristate "LPC32XX USB Peripheral Controller"
|
|
depends on ARCH_LPC32XX && I2C
|
|
select USB_ISP1301
|
|
help
|
|
This option selects the USB device controller in the LPC32xx SoC.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "lpc32xx_udc" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_ATMEL_USBA
|
|
tristate "Atmel USBA"
|
|
depends on ARCH_AT91
|
|
help
|
|
USBA is the integrated high-speed USB Device controller on
|
|
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
|
|
|
|
The fifo_mode parameter is used to select endpoint allocation mode.
|
|
fifo_mode = 0 is used to let the driver autoconfigure the endpoints.
|
|
In this case, for ep1 2 banks are allocated if it works in isochronous
|
|
mode and only 1 bank otherwise. For the rest of the endpoints
|
|
only 1 bank is allocated.
|
|
|
|
fifo_mode = 1 is a generic maximum fifo size (1024 bytes) configuration
|
|
allowing the usage of ep1 - ep6
|
|
|
|
fifo_mode = 2 is a generic performance maximum fifo size (1024 bytes)
|
|
configuration allowing the usage of ep1 - ep3
|
|
|
|
fifo_mode = 3 is a balanced performance configuration allowing the
|
|
the usage of ep1 - ep8
|
|
|
|
config USB_BCM63XX_UDC
|
|
tristate "Broadcom BCM63xx Peripheral Controller"
|
|
depends on BCM63XX
|
|
help
|
|
Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
|
|
high speed USB Device Port with support for four fixed endpoints
|
|
(plus endpoint zero).
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "bcm63xx_udc".
|
|
|
|
config USB_FSL_USB2
|
|
tristate "Freescale Highspeed USB DR Peripheral Controller"
|
|
depends on FSL_SOC || ARCH_MXC
|
|
help
|
|
Some of Freescale PowerPC and i.MX processors have a High Speed
|
|
Dual-Role(DR) USB controller, which supports device mode.
|
|
|
|
The number of programmable endpoints is different through
|
|
SOC revisions.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "fsl_usb2_udc" and force
|
|
all gadget drivers to also be dynamically linked.
|
|
|
|
config USB_FUSB300
|
|
tristate "Faraday FUSB300 USB Peripheral Controller"
|
|
depends on !PHYS_ADDR_T_64BIT && HAS_DMA
|
|
help
|
|
Faraday usb device controller FUSB300 driver
|
|
|
|
config USB_FOTG210_UDC
|
|
depends on HAS_DMA
|
|
tristate "Faraday FOTG210 USB Peripheral Controller"
|
|
help
|
|
Faraday USB2.0 OTG controller which can be configured as
|
|
high speed or full speed USB device. This driver supppors
|
|
Bulk Transfer so far.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "fotg210_udc".
|
|
|
|
config USB_GR_UDC
|
|
tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
|
|
depends on HAS_DMA
|
|
help
|
|
Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
|
|
VHDL IP core library.
|
|
|
|
config USB_OMAP
|
|
tristate "OMAP USB Device Controller"
|
|
depends on ARCH_OMAP1
|
|
depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
|
|
help
|
|
Many Texas Instruments OMAP processors have flexible full
|
|
speed USB device controllers, with support for up to 30
|
|
endpoints (plus endpoint zero). This driver supports the
|
|
controller in the OMAP 1611, and should work with controllers
|
|
in other OMAP processors too, given minor tweaks.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "omap_udc" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_PXA25X
|
|
tristate "PXA 25x or IXP 4xx"
|
|
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
|
|
depends on HAS_IOMEM
|
|
help
|
|
Intel's PXA 25x series XScale ARM-5TE processors include
|
|
an integrated full speed USB 1.1 device controller. The
|
|
controller in the IXP 4xx series is register-compatible.
|
|
|
|
It has fifteen fixed-function endpoints, as well as endpoint
|
|
zero (for control transfers).
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "pxa25x_udc" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
# if there's only one gadget driver, using only two bulk endpoints,
|
|
# don't waste memory for the other endpoints
|
|
config USB_PXA25X_SMALL
|
|
depends on USB_PXA25X
|
|
bool
|
|
default n if USB_ETH_RNDIS
|
|
default y if USB_ZERO
|
|
default y if USB_ETH
|
|
default y if USB_G_SERIAL
|
|
|
|
config USB_R8A66597
|
|
tristate "Renesas R8A66597 USB Peripheral Controller"
|
|
depends on HAS_DMA
|
|
help
|
|
R8A66597 is a discrete USB host and peripheral controller chip that
|
|
supports both full and high speed USB 2.0 data transfers.
|
|
It has nine configurable endpoints, and endpoint zero.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "r8a66597_udc" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_RENESAS_USBHS_UDC
|
|
tristate 'Renesas USBHS controller'
|
|
depends on USB_RENESAS_USBHS
|
|
help
|
|
Renesas USBHS is a discrete USB host and peripheral controller chip
|
|
that supports both full and high speed USB 2.0 data transfers.
|
|
It has nine or more configurable endpoints, and endpoint zero.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "renesas_usbhs" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_RENESAS_USB3
|
|
tristate 'Renesas USB3.0 Peripheral controller'
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
depends on EXTCON
|
|
select USB_ROLE_SWITCH
|
|
help
|
|
Renesas USB3.0 Peripheral controller is a USB peripheral controller
|
|
that supports super, high, and full speed USB 3.0 data transfers.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "renesas_usb3" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_PXA27X
|
|
tristate "PXA 27x"
|
|
depends on HAS_IOMEM
|
|
help
|
|
Intel's PXA 27x series XScale ARM v5TE processors include
|
|
an integrated full speed USB 1.1 device controller.
|
|
|
|
It has up to 23 endpoints, as well as endpoint zero (for
|
|
control transfers).
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "pxa27x_udc" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_S3C2410
|
|
tristate "S3C2410 USB Device Controller"
|
|
depends on ARCH_S3C24XX
|
|
help
|
|
Samsung's S3C2410 is an ARM-4 processor with an integrated
|
|
full speed USB 1.1 device controller. It has 4 configurable
|
|
endpoints, as well as endpoint zero (for control transfers).
|
|
|
|
This driver has been tested on the S3C2410, S3C2412, and
|
|
S3C2440 processors.
|
|
|
|
config USB_S3C2410_DEBUG
|
|
bool "S3C2410 udc debug messages"
|
|
depends on USB_S3C2410
|
|
|
|
config USB_S3C_HSUDC
|
|
tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
|
|
depends on ARCH_S3C24XX
|
|
help
|
|
Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
|
|
integrated with dual speed USB 2.0 device controller. It has
|
|
8 endpoints, as well as endpoint zero.
|
|
|
|
This driver has been tested on S3C2416 and S3C2450 processors.
|
|
|
|
config USB_MV_UDC
|
|
tristate "Marvell USB2.0 Device Controller"
|
|
depends on HAS_DMA
|
|
help
|
|
Marvell Socs (including PXA and MMP series) include a high speed
|
|
USB2.0 OTG controller, which can be configured as high speed or
|
|
full speed USB peripheral.
|
|
|
|
config USB_MV_U3D
|
|
depends on HAS_DMA
|
|
tristate "MARVELL PXA2128 USB 3.0 controller"
|
|
help
|
|
MARVELL PXA2128 Processor series include a super speed USB3.0 device
|
|
controller, which support super speed USB peripheral.
|
|
|
|
config USB_SNP_CORE
|
|
depends on (USB_AMD5536UDC || USB_SNP_UDC_PLAT)
|
|
depends on HAS_DMA
|
|
tristate
|
|
help
|
|
This enables core driver support for Synopsys USB 2.0 Device
|
|
controller.
|
|
|
|
This will be enabled when PCI or Platform driver for this UDC is
|
|
selected. Currently, this will be enabled by USB_SNP_UDC_PLAT or
|
|
USB_AMD5536UDC options.
|
|
|
|
This IP is different to the High Speed OTG IP that can be enabled
|
|
by selecting USB_DWC2 or USB_DWC3 options.
|
|
|
|
config USB_SNP_UDC_PLAT
|
|
tristate "Synopsys USB 2.0 Device controller"
|
|
depends on USB_GADGET && OF && HAS_DMA
|
|
depends on EXTCON || EXTCON=n
|
|
select USB_SNP_CORE
|
|
default ARCH_BCM_IPROC
|
|
help
|
|
This adds Platform Device support for Synopsys Designware core
|
|
AHB subsystem USB2.0 Device Controller (UDC).
|
|
|
|
This driver works with UDCs integrated into Broadcom's Northstar2
|
|
and Cygnus SoCs.
|
|
|
|
If unsure, say N.
|
|
#
|
|
# Controllers available in both integrated and discrete versions
|
|
#
|
|
|
|
config USB_M66592
|
|
tristate "Renesas M66592 USB Peripheral Controller"
|
|
depends on HAS_IOMEM
|
|
help
|
|
M66592 is a discrete USB peripheral controller chip that
|
|
supports both full and high speed USB 2.0 data transfers.
|
|
It has seven configurable endpoints, and endpoint zero.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "m66592_udc" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
source "drivers/usb/gadget/udc/bdc/Kconfig"
|
|
|
|
#
|
|
# Controllers available only in discrete form (and all PCI controllers)
|
|
#
|
|
|
|
config USB_AMD5536UDC
|
|
tristate "AMD5536 UDC"
|
|
depends on USB_PCI
|
|
select USB_SNP_CORE
|
|
help
|
|
The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
|
|
It is a USB Highspeed DMA capable USB device controller. Beside ep0
|
|
it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
|
|
The UDC port supports OTG operation, and may be used as a host port
|
|
if it's not being used to implement peripheral or OTG roles.
|
|
|
|
This UDC is based on Synopsys USB device controller IP and selects
|
|
CONFIG_USB_SNP_CORE option to build the core driver.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "amd5536udc" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_FSL_QE
|
|
tristate "Freescale QE/CPM USB Device Controller"
|
|
depends on FSL_SOC && (QUICC_ENGINE || CPM)
|
|
help
|
|
Some of Freescale PowerPC processors have a Full Speed
|
|
QE/CPM2 USB controller, which support device mode with 4
|
|
programmable endpoints. This driver supports the
|
|
controller in the MPC8360 and MPC8272, and should work with
|
|
controllers having QE or CPM2, given minor tweaks.
|
|
|
|
Set CONFIG_USB_GADGET to "m" to build this driver as a
|
|
dynamically linked module called "fsl_qe_udc".
|
|
|
|
config USB_NET2272
|
|
depends on HAS_IOMEM
|
|
tristate "PLX NET2272"
|
|
help
|
|
PLX NET2272 is a USB peripheral controller which supports
|
|
both full and high speed USB 2.0 data transfers.
|
|
|
|
It has three configurable endpoints, as well as endpoint zero
|
|
(for control transfer).
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "net2272" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_NET2272_DMA
|
|
bool "Support external DMA controller"
|
|
depends on USB_NET2272 && HAS_DMA
|
|
help
|
|
The NET2272 part can optionally support an external DMA
|
|
controller, but your board has to have support in the
|
|
driver itself.
|
|
|
|
If unsure, say "N" here. The driver works fine in PIO mode.
|
|
|
|
config USB_NET2280
|
|
tristate "NetChip NET228x / PLX USB3x8x"
|
|
depends on USB_PCI
|
|
help
|
|
NetChip 2280 / 2282 is a PCI based USB peripheral controller which
|
|
supports both full and high speed USB 2.0 data transfers.
|
|
|
|
It has six configurable endpoints, as well as endpoint zero
|
|
(for control transfers) and several endpoints with dedicated
|
|
functions.
|
|
|
|
PLX 2380 is a PCIe version of the PLX 2380.
|
|
|
|
PLX 3380 / 3382 is a PCIe based USB peripheral controller which
|
|
supports full, high speed USB 2.0 and super speed USB 3.0
|
|
data transfers.
|
|
|
|
It has eight configurable endpoints, as well as endpoint zero
|
|
(for control transfers) and several endpoints with dedicated
|
|
functions.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "net2280" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_GOKU
|
|
tristate "Toshiba TC86C001 'Goku-S'"
|
|
depends on USB_PCI
|
|
help
|
|
The Toshiba TC86C001 is a PCI device which includes controllers
|
|
for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
|
|
|
|
The device controller has three configurable (bulk or interrupt)
|
|
endpoints, plus endpoint zero (for control transfers).
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "goku_udc" and to force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
config USB_EG20T
|
|
tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
|
|
depends on USB_PCI
|
|
help
|
|
This is a USB device driver for EG20T PCH.
|
|
EG20T PCH is the platform controller hub that is used in Intel's
|
|
general embedded platform. EG20T PCH has USB device interface.
|
|
Using this interface, it is able to access system devices connected
|
|
to USB device.
|
|
This driver enables USB device function.
|
|
USB device is a USB peripheral controller which
|
|
supports both full and high speed USB 2.0 data transfers.
|
|
This driver supports both control transfer and bulk transfer modes.
|
|
This driver dose not support interrupt transfer or isochronous
|
|
transfer modes.
|
|
|
|
This driver also can be used for LAPIS Semiconductor's ML7213 which is
|
|
for IVI(In-Vehicle Infotainment) use.
|
|
ML7831 is for general purpose use.
|
|
ML7213/ML7831 is companion chip for Intel Atom E6xx series.
|
|
ML7213/ML7831 is completely compatible for Intel EG20T PCH.
|
|
|
|
This driver can be used with Intel's Quark X1000 SOC platform
|
|
|
|
config USB_GADGET_XILINX
|
|
tristate "Xilinx USB Driver"
|
|
depends on HAS_DMA
|
|
depends on OF || COMPILE_TEST
|
|
help
|
|
USB peripheral controller driver for Xilinx USB2 device.
|
|
Xilinx USB2 device is a soft IP which supports both full
|
|
and high speed USB 2.0 data transfers. It has seven configurable
|
|
endpoints(bulk or interrupt or isochronous), as well as
|
|
endpoint zero(for control transfers).
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "udc-xilinx" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
|
|
|
|
#
|
|
# LAST -- dummy/emulated controller
|
|
#
|
|
|
|
config USB_DUMMY_HCD
|
|
tristate "Dummy HCD (DEVELOPMENT)"
|
|
depends on USB=y || (USB=m && USB_GADGET=m)
|
|
help
|
|
This host controller driver emulates USB, looping all data transfer
|
|
requests back to a USB "gadget driver" in the same host. The host
|
|
side is the master; the gadget side is the slave. Gadget drivers
|
|
can be high, full, or low speed; and they have access to endpoints
|
|
like those from NET2280, PXA2xx, or SA1100 hardware.
|
|
|
|
This may help in some stages of creating a driver to embed in a
|
|
Linux device, since it lets you debug several parts of the gadget
|
|
driver without its hardware or drivers being involved.
|
|
|
|
Since such a gadget side driver needs to interoperate with a host
|
|
side Linux-USB device driver, this may help to debug both sides
|
|
of a USB protocol stack.
|
|
|
|
Say "y" to link the driver statically, or "m" to build a
|
|
dynamically linked module called "dummy_hcd" and force all
|
|
gadget drivers to also be dynamically linked.
|
|
|
|
# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears
|
|
# first and will be selected by default.
|
|
|
|
endmenu
|