AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-20 12:10:01 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
076f87105a
linux_dsm_epyc7002/arch/arm/boot/dts/omap4-droid4-xt894.dts
Tony Lindgren 22d653429e ARM: dts: omap4-droid4: Stop disabling SRAM and GPMC 
I disabled SRAM and GPMC originally when seeing errors with
omap_barriers_init(). But that is no longer happening probably
because the memory range is now properly configured to 1021 MB
instead of 1024 MB. So let's enable SRAM and GPMC so we get
omap_barriers_init() working and can idle the GPMC.

Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-04 09:22:30 -07:00

518 lines
12 KiB
Plaintext
Raw Blame History

/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "omap443x.dtsi"
#include "motorola-cpcap-mapphone.dtsi"
/ {
model = "Motorola Droid 4 XT894";
compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
chosen {
stdout-path = &uart3;
};
aliases {
display0 = &lcd0;
display1 = &hdmi0;
};
/*
* We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
* then 1023 - 1024 seems to contain mbm.
*/
memory {
device_type = "memory";
reg = <0x80000000 0x3fd00000>; /* 1021 MB */
};
/* Poweroff GPIO probably connected to CPCAP */
gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff_gpio>;
pinctrl-names = "default";
gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */
};
hdmi0: connector {
compatible = "hdmi-connector";
pinctrl-0 = <&hdmi_hpd_gpio>;
pinctrl-names = "default";
label = "hdmi";
type = "d";
hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
};
/*
* HDMI 5V regulator probably sourced from battery. Let's keep
* keep this as always enabled for HDMI to work until we've
* figured what the encoder chip is.
*/
hdmi_regulator: regulator-hdmi {
compatible = "regulator-fixed";
regulator-name = "hdmi";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */
enable-active-high;
regulator-always-on;
};
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
};
/* LCD regulator from sw5 source */
lcd_regulator: regulator-lcd {
compatible = "regulator-fixed";
regulator-name = "lcd";
regulator-min-microvolt = <5050000>;
regulator-max-microvolt = <5050000>;
gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
enable-active-high;
vin-supply = <&sw5>;
};
/* This is probably coming straight from the battery.. */
wl12xx_vmmc: regulator-wl12xx {
compatible = "regulator-fixed";
regulator-name = "vwl1271";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1650000>;
gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */
startup-delay-us = <70000>;
enable-active-high;
};
gpio_keys {
compatible = "gpio-keys";
volume_down {
label = "Volume Down";
gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
linux,code = <KEY_VOLUMEDOWN>;
linux,can-disable;
};
slider {
label = "Keypad Slide";
gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
linux,input-type = <EV_SW>;
linux,code = <SW_KEYPAD_SLIDE>;
linux,can-disable;
};
};
};
&dss {
status = "okay";
};
&gpio6 {
touchscreen_reset {
gpio-hog;
gpios = <13 0>;
output-high;
line-name = "touchscreen-reset";
};
};
&dsi1 {
status = "okay";
vdd-supply = <&vcsi>;
port {
dsi1_out_ep: endpoint {
remote-endpoint = <&lcd0_in>;
lanes = <0 1 2 3 4 5>;
};
};
lcd0: display {
compatible = "panel-dsi-cm";
label = "lcd0";
vddi-supply = <&lcd_regulator>;
reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
panel-timing {
clock-frequency = <0>; /* Calculated by dsi */
hback-porch = <2>;
hactive = <540>;
hfront-porch = <0>;
hsync-len = <2>;
vback-porch = <1>;
vactive = <960>;
vfront-porch = <0>;
vsync-len = <1>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
port {
lcd0_in: endpoint {
remote-endpoint = <&dsi1_out_ep>;
};
};
};
};
&hdmi {
status = "okay";
pinctrl-0 = <&dss_hdmi_pins>;
pinctrl-names = "default";
vdda-supply = <&vdac>;
port {
hdmi_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
lanes = <1 0 3 2 5 4 7 6>;
};
};
};
&i2c1 {
tmp105@48 {
compatible = "ti,tmp105";
reg = <0x48>;
pinctrl-0 = <&tmp105_irq>;
pinctrl-names = "default";
/* kpd_row0.gpio_178 */
interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
&omap4_pmx_core 0x14e>;
interrupt-names = "irq", "wakeup";
wakeup-source;
};
};
&keypad {
keypad,num-rows = <8>;
keypad,num-columns = <8>;
linux,keymap = <
/* Row 1 */
MATRIX_KEY(0, 2, KEY_1)
MATRIX_KEY(0, 6, KEY_2)
MATRIX_KEY(2, 3, KEY_3)
MATRIX_KEY(0, 7, KEY_4)
MATRIX_KEY(0, 4, KEY_5)
MATRIX_KEY(5, 5, KEY_6)
MATRIX_KEY(0, 1, KEY_7)
MATRIX_KEY(0, 5, KEY_8)
MATRIX_KEY(0, 0, KEY_9)
MATRIX_KEY(1, 6, KEY_0)
/* Row 2 */
MATRIX_KEY(3, 4, KEY_APOSTROPHE)
MATRIX_KEY(7, 6, KEY_Q)
MATRIX_KEY(7, 7, KEY_W)
MATRIX_KEY(7, 2, KEY_E)
MATRIX_KEY(1, 0, KEY_R)
MATRIX_KEY(4, 4, KEY_T)
MATRIX_KEY(1, 2, KEY_Y)
MATRIX_KEY(6, 7, KEY_U)
MATRIX_KEY(2, 2, KEY_I)
MATRIX_KEY(5, 6, KEY_O)
MATRIX_KEY(3, 7, KEY_P)
MATRIX_KEY(6, 5, KEY_BACKSPACE)
/* Row 3 */
MATRIX_KEY(5, 4, KEY_TAB)
MATRIX_KEY(5, 7, KEY_A)
MATRIX_KEY(2, 7, KEY_S)
MATRIX_KEY(7, 0, KEY_D)
MATRIX_KEY(2, 6, KEY_F)
MATRIX_KEY(6, 2, KEY_G)
MATRIX_KEY(6, 6, KEY_H)
MATRIX_KEY(1, 4, KEY_J)
MATRIX_KEY(3, 1, KEY_K)
MATRIX_KEY(2, 1, KEY_L)
MATRIX_KEY(4, 6, KEY_ENTER)
/* Row 4 */
MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */
MATRIX_KEY(6, 1, KEY_Z)
MATRIX_KEY(7, 4, KEY_X)
MATRIX_KEY(5, 1, KEY_C)
MATRIX_KEY(1, 7, KEY_V)
MATRIX_KEY(2, 4, KEY_B)
MATRIX_KEY(4, 1, KEY_N)
MATRIX_KEY(1, 1, KEY_M)
MATRIX_KEY(3, 5, KEY_COMMA)
MATRIX_KEY(5, 2, KEY_DOT)
MATRIX_KEY(6, 3, KEY_UP)
MATRIX_KEY(7, 3, KEY_OK)
/* Row 5 */
MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */
MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */
MATRIX_KEY(6, 0, KEY_MINUS)
MATRIX_KEY(4, 7, KEY_EQUAL)
MATRIX_KEY(1, 5, KEY_SPACE)
MATRIX_KEY(3, 2, KEY_SLASH)
MATRIX_KEY(4, 3, KEY_LEFT)
MATRIX_KEY(5, 3, KEY_DOWN)
MATRIX_KEY(3, 3, KEY_RIGHT)
/* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
MATRIX_KEY(5, 0, KEY_VOLUMEUP)
>;
};
&mmc1 {
vmmc-supply = <&vwlan2>;
bus-width = <4>;
cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */
};
&mmc2 {
vmmc-supply = <&vsdio>;
bus-width = <8>;
non-removable;
};
&mmc3 {
vmmc-supply = <&wl12xx_vmmc>;
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core 0xde>;
non-removable;
bus-width = <4>;
cap-power-off-card;
#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@2 {
compatible = "ti,wl1283";
reg = <2>;
interrupt-parent = <&gpio4>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */
ref-clock-frequency = <26000000>;
tcxo-clock-frequency = <26000000>;
};
};
&i2c1 {
lm3532@38 {
compatible = "ti,lm3532";
reg = <0x38>;
enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
backlight {
compatible = "ti,lm3532-backlight";
lcd {
led-sources = <0 1 2>;
ramp-up-msec = <1>;
ramp-down-msec = <0>;
};
};
};
};
/*
* REVISIT: Add gpio173 reset pin handling to the driver, see gpio-hog above.
* If the GPIO reset is used, we probably need to have /lib/firmware/maxtouch.fw
* available. See "mxt-app" and "droid4-touchscreen-firmware" tools for more
* information.
*/
&i2c2 {
tsp@4a {
compatible = "atmel,maxtouch";
reg = <0x4a>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
/* gpio_183 with sys_nirq2 pad as wakeup */
interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING
&omap4_pmx_core 0x160>;
interrupt-names = "irq", "wakeup";
wakeup-source;
};
};
&omap4_pmx_core {
/* hdmi_hpd.gpio_63 */
hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
>;
};
/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
>;
};
/* gpmc_ncs0.gpio_50 */
poweroff_gpio: pinmux_poweroff_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
>;
};
/* kpd_row0.gpio_178 */
tmp105_irq: pinmux_tmp105_irq {
pinctrl-single,pins = <
OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
>;
};
usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
/* gpio_60 */
pinctrl-single,pins = <
OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
>;
};
touchscreen_pins: pinmux_touchscreen_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
>;
};
usb_ulpi_pins: pinmux_usb_ulpi_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x196, MUX_MODE7)
OMAP4_IOPAD(0x198, MUX_MODE7)
OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
>;
};
/* usb0_otg_dp and usb0_otg_dm */
usb_utmi_pins: pinmux_usb_utmi_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
>;
};
/* uart3_tx_irtx and uart3_rx_irrx */
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x196, MUX_MODE7)
OMAP4_IOPAD(0x198, MUX_MODE7)
OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1ba, MUX_MODE2)
OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
>;
};
};
&omap4_pmx_wkup {
usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
/* gpio_wk0 */
pinctrl-single,pins = <
OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
>;
};
};
&uart3 {
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core 0x17c>;
};
&usbhsehci {
phys = <&hsusb1_phy>;
};
&usbhshost {
port1-mode = "ohci-phy-4pin-dpdm";
port2-mode = "ehci-tll";
};
/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
&usb_otg_hs {
interface-type = <1>;
mode = <3>;
power = <50>;
};
&i2c4 {
ak8975: magnetometer@c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
vdd-supply = <&vhvio>;
interrupt-parent = <&gpio6>;
interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
rotation-matrix = "-1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
lis3dh: accelerometer@18 {
compatible = "st,lis3dh-accel";
reg = <0x18>;
vdd-supply = <&vhvio>;
interrupt-parent = <&gpio2>;
interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
rotation-matrix = "0", "-1", "0",
"1", "0", "0",
"0", "0", "1";
};
};
Reference in New Issue View Git Blame Copy Permalink