linux_dsm_epyc7002/arch/powerpc/kernel/cpu_setup_power.S
Nicholas Piggin d4748276ae powerpc/64s: Improve local TLB flush for boot and MCE on POWER9
There are several cases outside the normal address space management
where a CPU's entire local TLB is to be flushed:

  1. Booting the kernel, in case something has left stale entries in
     the TLB (e.g., kexec).

  2. Machine check, to clean corrupted TLB entries.

One other place where the TLB is flushed, is waking from deep idle
states. The flush is a side-effect of calling ->cpu_restore with the
intention of re-setting various SPRs. The flush itself is unnecessary
because in the first case, the TLB should not acquire new corrupted
TLB entries as part of sleep/wake (though they may be lost).

This type of TLB flush is coded inflexibly, several times for each CPU
type, and they have a number of problems with ISA v3.0B:

- The current radix mode of the MMU is not taken into account, it is
  always done as a hash flushn For IS=2 (LPID-matching flush from host)
  and IS=3 with HV=0 (guest kernel flush), tlbie(l) is undefined if
  the R field does not match the current radix mode.

- ISA v3.0B hash must flush the partition and process table caches as
  well.

- ISA v3.0B radix must flush partition and process scoped translations,
  partition and process table caches, and also the page walk cache.

So consolidate the flushing code and implement it in C and inline asm
under the mm/ directory with the rest of the flush code. Add ISA v3.0B
cases for radix and hash, and use the radix flush in radix environment.

Provide a way for IS=2 (LPID flush) to specify the radix mode of the
partition. Have KVM pass in the radix mode of the guest.

Take out the flushes from early cputable/dt_cpu_ftrs detection hooks,
and move it later in the boot process after, the MMU registers are set
up and before relocation is first turned on.

The TLB flush is no longer called when restoring from deep idle states.
This was not be done as a separate step because booting secondaries
uses the same cpu_restore as idle restore, which needs the TLB flush.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-18 00:40:31 +11:00

211 lines
4.0 KiB
ArmAsm

/*
* This file contains low level CPU setup functions.
* Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
#include <asm/book3s/64/mmu-hash.h>
/* Entry: r3 = crap, r4 = ptr to cputable entry
*
* Note that we can be called twice for pseudo-PVRs
*/
_GLOBAL(__setup_cpu_power7)
mflr r11
bl __init_hvmode_206
mtlr r11
beqlr
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
li r4,(LPCR_LPES1 >> LPCR_LPES_SH)
bl __init_LPCR_ISA206
mtlr r11
blr
_GLOBAL(__restore_cpu_power7)
mflr r11
mfmsr r3
rldicl. r0,r3,4,63
beqlr
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
li r4,(LPCR_LPES1 >> LPCR_LPES_SH)
bl __init_LPCR_ISA206
mtlr r11
blr
_GLOBAL(__setup_cpu_power8)
mflr r11
bl __init_FSCR
bl __init_PMU
bl __init_PMU_ISA207
bl __init_hvmode_206
mtlr r11
beqlr
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
ori r3, r3, LPCR_PECEDH
li r4,0 /* LPES = 0 */
bl __init_LPCR_ISA206
bl __init_HFSCR
bl __init_PMU_HV
bl __init_PMU_HV_ISA207
mtlr r11
blr
_GLOBAL(__restore_cpu_power8)
mflr r11
bl __init_FSCR
bl __init_PMU
bl __init_PMU_ISA207
mfmsr r3
rldicl. r0,r3,4,63
mtlr r11
beqlr
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
ori r3, r3, LPCR_PECEDH
li r4,0 /* LPES = 0 */
bl __init_LPCR_ISA206
bl __init_HFSCR
bl __init_PMU_HV
bl __init_PMU_HV_ISA207
mtlr r11
blr
_GLOBAL(__setup_cpu_power9)
mflr r11
bl __init_FSCR
bl __init_PMU
bl __init_hvmode_206
mtlr r11
beqlr
li r0,0
mtspr SPRN_PSSCR,r0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
or r3, r3, r4
LOAD_REG_IMMEDIATE(r4, LPCR_UPRT | LPCR_HR)
andc r3, r3, r4
li r4,0 /* LPES = 0 */
bl __init_LPCR_ISA300
bl __init_HFSCR
bl __init_PMU_HV
mtlr r11
blr
_GLOBAL(__restore_cpu_power9)
mflr r11
bl __init_FSCR
bl __init_PMU
mfmsr r3
rldicl. r0,r3,4,63
mtlr r11
beqlr
li r0,0
mtspr SPRN_PSSCR,r0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
or r3, r3, r4
LOAD_REG_IMMEDIATE(r4, LPCR_UPRT | LPCR_HR)
andc r3, r3, r4
li r4,0 /* LPES = 0 */
bl __init_LPCR_ISA300
bl __init_HFSCR
bl __init_PMU_HV
mtlr r11
blr
__init_hvmode_206:
/* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */
mfmsr r3
rldicl. r0,r3,4,63
bnelr
ld r5,CPU_SPEC_FEATURES(r4)
LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE)
xor r5,r5,r6
std r5,CPU_SPEC_FEATURES(r4)
blr
__init_LPCR_ISA206:
/* Setup a sane LPCR:
* Called with initial LPCR in R3 and desired LPES 2-bit value in R4
*
* LPES = 0b01 (HSRR0/1 used for 0x500)
* PECE = 0b111
* DPFD = 4
* HDICE = 0
* VC = 0b100 (VPM0=1, VPM1=0, ISL=0)
* VRMASD = 0b10000 (L=1, LP=00)
*
* Other bits untouched for now
*/
li r5,0x10
rldimi r3,r5, LPCR_VRMASD_SH, 64-LPCR_VRMASD_SH-5
/* POWER9 has no VRMASD */
__init_LPCR_ISA300:
rldimi r3,r4, LPCR_LPES_SH, 64-LPCR_LPES_SH-2
ori r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
li r5,4
rldimi r3,r5, LPCR_DPFD_SH, 64-LPCR_DPFD_SH-3
clrrdi r3,r3,1 /* clear HDICE */
li r5,4
rldimi r3,r5, LPCR_VC_SH, 0
mtspr SPRN_LPCR,r3
isync
blr
__init_FSCR:
mfspr r3,SPRN_FSCR
ori r3,r3,FSCR_TAR|FSCR_DSCR|FSCR_EBB
mtspr SPRN_FSCR,r3
blr
__init_HFSCR:
mfspr r3,SPRN_HFSCR
ori r3,r3,HFSCR_TAR|HFSCR_TM|HFSCR_BHRB|HFSCR_PM|\
HFSCR_DSCR|HFSCR_VECVSX|HFSCR_FP|HFSCR_EBB|HFSCR_MSGP
mtspr SPRN_HFSCR,r3
blr
__init_PMU_HV:
li r5,0
mtspr SPRN_MMCRC,r5
blr
__init_PMU_HV_ISA207:
li r5,0
mtspr SPRN_MMCRH,r5
blr
__init_PMU:
li r5,0
mtspr SPRN_MMCRA,r5
mtspr SPRN_MMCR0,r5
mtspr SPRN_MMCR1,r5
mtspr SPRN_MMCR2,r5
blr
__init_PMU_ISA207:
li r5,0
mtspr SPRN_MMCRS,r5
blr