mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 05:16:43 +07:00
aa29efb445
NXP LPC32xx SoC has one USB OTG controller, which is supposed to work with an external phy (default is NXP ISP1301). Practically the USB controller contains 5 subdevices: - host controller 0x3102 0000 -- 0x3102 00FF - OTG controller 0x3102 0100 -- 0x3102 01FF - device controller 0x3102 0200 -- 0x3102 02FF - I2C controller 0x3102 0300 -- 0x3102 03FF - clock controller 0x3102 0F00 -- 0x3102 0FFF The USB controller can be considered as a "bus", because the subdevices above are relatively independent, for example I2C controller is the same as other two general purpose I2C controllers found on SoC. The change is not intended to modify any logic, but it rearranges existing device nodes, in future it is planned to add a USB clock controller device node into the same group. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
368 lines
7.8 KiB
Plaintext
368 lines
7.8 KiB
Plaintext
/*
|
|
* NXP LPC32xx SoC
|
|
*
|
|
* Copyright 2012 Roland Stigge <stigge@antcom.de>
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "nxp,lpc3220";
|
|
interrupt-parent = <&mic>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,arm926ej-s";
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
};
|
|
};
|
|
|
|
ahb {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
ranges = <0x20000000 0x20000000 0x30000000>,
|
|
<0xe0000000 0xe0000000 0x04000000>;
|
|
|
|
/*
|
|
* Enable either SLC or MLC
|
|
*/
|
|
slc: flash@20020000 {
|
|
compatible = "nxp,lpc3220-slc";
|
|
reg = <0x20020000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mlc: flash@200a8000 {
|
|
compatible = "nxp,lpc3220-mlc";
|
|
reg = <0x200a8000 0x11000>;
|
|
interrupts = <11 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dma: dma@31000000 {
|
|
compatible = "arm,pl080", "arm,primecell";
|
|
reg = <0x31000000 0x1000>;
|
|
interrupts = <0x1c 0>;
|
|
};
|
|
|
|
usb {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
ranges = <0x0 0x31020000 0x00001000>;
|
|
|
|
/*
|
|
* Enable either ohci or usbd (gadget)!
|
|
*/
|
|
ohci: ohci@0 {
|
|
compatible = "nxp,ohci-nxp", "usb-ohci";
|
|
reg = <0x0 0x300>;
|
|
interrupts = <0x3b 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbd: usbd@0 {
|
|
compatible = "nxp,lpc3220-udc";
|
|
reg = <0x0 0x300>;
|
|
interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2cusb: i2c@300 {
|
|
compatible = "nxp,pnx-i2c";
|
|
reg = <0x300 0x100>;
|
|
interrupts = <0x3f 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pnx,timeout = <0x64>;
|
|
};
|
|
};
|
|
|
|
clcd: clcd@31040000 {
|
|
compatible = "arm,pl110", "arm,primecell";
|
|
reg = <0x31040000 0x1000>;
|
|
interrupts = <0x0e 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mac: ethernet@31060000 {
|
|
compatible = "nxp,lpc-eth";
|
|
reg = <0x31060000 0x1000>;
|
|
interrupts = <0x1d 0>;
|
|
};
|
|
|
|
emc: memory-controller@31080000 {
|
|
compatible = "arm,pl175", "arm,primecell";
|
|
reg = <0x31080000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = <0 0xe0000000 0x01000000>,
|
|
<1 0xe1000000 0x01000000>,
|
|
<2 0xe2000000 0x01000000>,
|
|
<3 0xe3000000 0x01000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
apb {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
ranges = <0x20000000 0x20000000 0x30000000>;
|
|
|
|
ssp0: ssp@20084000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x20084000 0x1000>;
|
|
interrupts = <0x14 0>;
|
|
};
|
|
|
|
spi1: spi@20088000 {
|
|
compatible = "nxp,lpc3220-spi";
|
|
reg = <0x20088000 0x1000>;
|
|
};
|
|
|
|
ssp1: ssp@2008c000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x2008c000 0x1000>;
|
|
interrupts = <0x15 0>;
|
|
};
|
|
|
|
spi2: spi@20090000 {
|
|
compatible = "nxp,lpc3220-spi";
|
|
reg = <0x20090000 0x1000>;
|
|
};
|
|
|
|
i2s0: i2s@20094000 {
|
|
compatible = "nxp,lpc3220-i2s";
|
|
reg = <0x20094000 0x1000>;
|
|
};
|
|
|
|
sd: sd@20098000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x20098000 0x1000>;
|
|
interrupts = <0x0f 0>, <0x0d 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s1: i2s@2009C000 {
|
|
compatible = "nxp,lpc3220-i2s";
|
|
reg = <0x2009C000 0x1000>;
|
|
};
|
|
|
|
/* UART5 first since it is the default console, ttyS0 */
|
|
uart5: serial@40090000 {
|
|
/* actually, ns16550a w/ 64 byte fifos! */
|
|
compatible = "nxp,lpc3220-uart";
|
|
reg = <0x40090000 0x1000>;
|
|
interrupts = <9 0>;
|
|
clock-frequency = <13000000>;
|
|
reg-shift = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@40080000 {
|
|
compatible = "nxp,lpc3220-uart";
|
|
reg = <0x40080000 0x1000>;
|
|
interrupts = <7 0>;
|
|
clock-frequency = <13000000>;
|
|
reg-shift = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@40088000 {
|
|
compatible = "nxp,lpc3220-uart";
|
|
reg = <0x40088000 0x1000>;
|
|
interrupts = <8 0>;
|
|
clock-frequency = <13000000>;
|
|
reg-shift = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart6: serial@40098000 {
|
|
compatible = "nxp,lpc3220-uart";
|
|
reg = <0x40098000 0x1000>;
|
|
interrupts = <10 0>;
|
|
clock-frequency = <13000000>;
|
|
reg-shift = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@400A0000 {
|
|
compatible = "nxp,pnx-i2c";
|
|
reg = <0x400A0000 0x100>;
|
|
interrupts = <0x33 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pnx,timeout = <0x64>;
|
|
};
|
|
|
|
i2c2: i2c@400A8000 {
|
|
compatible = "nxp,pnx-i2c";
|
|
reg = <0x400A8000 0x100>;
|
|
interrupts = <0x32 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pnx,timeout = <0x64>;
|
|
};
|
|
|
|
mpwm: mpwm@400E8000 {
|
|
compatible = "nxp,lpc3220-motor-pwm";
|
|
reg = <0x400E8000 0x78>;
|
|
status = "disabled";
|
|
#pwm-cells = <2>;
|
|
};
|
|
};
|
|
|
|
fab {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
ranges = <0x20000000 0x20000000 0x30000000>;
|
|
|
|
/*
|
|
* MIC Interrupt controller includes:
|
|
* MIC @40008000
|
|
* SIC1 @4000C000
|
|
* SIC2 @40010000
|
|
*/
|
|
mic: interrupt-controller@40008000 {
|
|
compatible = "nxp,lpc3220-mic";
|
|
interrupt-controller;
|
|
reg = <0x40008000 0xC000>;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
uart1: serial@40014000 {
|
|
compatible = "nxp,lpc3220-hsuart";
|
|
reg = <0x40014000 0x1000>;
|
|
interrupts = <26 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@40018000 {
|
|
compatible = "nxp,lpc3220-hsuart";
|
|
reg = <0x40018000 0x1000>;
|
|
interrupts = <25 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart7: serial@4001c000 {
|
|
compatible = "nxp,lpc3220-hsuart";
|
|
reg = <0x4001c000 0x1000>;
|
|
interrupts = <24 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
rtc: rtc@40024000 {
|
|
compatible = "nxp,lpc3220-rtc";
|
|
reg = <0x40024000 0x1000>;
|
|
interrupts = <0x34 0>;
|
|
};
|
|
|
|
gpio: gpio@40028000 {
|
|
compatible = "nxp,lpc3220-gpio";
|
|
reg = <0x40028000 0x1000>;
|
|
gpio-controller;
|
|
#gpio-cells = <3>; /* bank, pin, flags */
|
|
};
|
|
|
|
timer4: timer@4002C000 {
|
|
compatible = "nxp,lpc3220-timer";
|
|
reg = <0x4002C000 0x1000>;
|
|
interrupts = <0x3 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer5: timer@40030000 {
|
|
compatible = "nxp,lpc3220-timer";
|
|
reg = <0x40030000 0x1000>;
|
|
interrupts = <0x4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog: watchdog@4003C000 {
|
|
compatible = "nxp,pnx4008-wdt";
|
|
reg = <0x4003C000 0x1000>;
|
|
};
|
|
|
|
timer0: timer@40044000 {
|
|
compatible = "nxp,lpc3220-timer";
|
|
reg = <0x40044000 0x1000>;
|
|
interrupts = <0x10 0>;
|
|
};
|
|
|
|
/*
|
|
* TSC vs. ADC: Since those two share the same
|
|
* hardware, you need to choose from one of the
|
|
* following two and do 'status = "okay";' for one of
|
|
* them
|
|
*/
|
|
|
|
adc: adc@40048000 {
|
|
compatible = "nxp,lpc3220-adc";
|
|
reg = <0x40048000 0x1000>;
|
|
interrupts = <0x27 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tsc: tsc@40048000 {
|
|
compatible = "nxp,lpc3220-tsc";
|
|
reg = <0x40048000 0x1000>;
|
|
interrupts = <0x27 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer1: timer@4004C000 {
|
|
compatible = "nxp,lpc3220-timer";
|
|
reg = <0x4004C000 0x1000>;
|
|
interrupts = <0x11 0>;
|
|
};
|
|
|
|
key: key@40050000 {
|
|
compatible = "nxp,lpc3220-key";
|
|
reg = <0x40050000 0x1000>;
|
|
interrupts = <54 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer2: timer@40058000 {
|
|
compatible = "nxp,lpc3220-timer";
|
|
reg = <0x40058000 0x1000>;
|
|
interrupts = <0x12 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm1: pwm@4005C000 {
|
|
compatible = "nxp,lpc3220-pwm";
|
|
reg = <0x4005C000 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@4005C004 {
|
|
compatible = "nxp,lpc3220-pwm";
|
|
reg = <0x4005C004 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer3: timer@40060000 {
|
|
compatible = "nxp,lpc3220-timer";
|
|
reg = <0x40060000 0x1000>;
|
|
interrupts = <0x13 0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
};
|