mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
db67cdb042
Add DT bindings for PCIe controller implemented in UniPhier SoCs when configured in Root Complex (host) mode. This controller is based on the DesignWare PCIe core. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
82 lines
2.8 KiB
Plaintext
82 lines
2.8 KiB
Plaintext
Socionext UniPhier PCIe host controller bindings
|
|
|
|
This describes the devicetree bindings for PCIe host controller implemented
|
|
on Socionext UniPhier SoCs.
|
|
|
|
UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core.
|
|
It shares common functions with the PCIe DesignWare core driver and inherits
|
|
common properties defined in
|
|
Documentation/devicetree/bindings/pci/designware-pcie.txt.
|
|
|
|
Required properties:
|
|
- compatible: Should be "socionext,uniphier-pcie".
|
|
- reg: Specifies offset and length of the register set for the device.
|
|
According to the reg-names, appropriate register sets are required.
|
|
- reg-names: Must include the following entries:
|
|
"dbi" - controller configuration registers
|
|
"link" - SoC-specific glue layer registers
|
|
"config" - PCIe configuration space
|
|
- clocks: A phandle to the clock gate for PCIe glue layer including
|
|
the host controller.
|
|
- resets: A phandle to the reset line for PCIe glue layer including
|
|
the host controller.
|
|
- interrupts: A list of interrupt specifiers. According to the
|
|
interrupt-names, appropriate interrupts are required.
|
|
- interrupt-names: Must include the following entries:
|
|
"dma" - DMA interrupt
|
|
"msi" - MSI interrupt
|
|
|
|
Optional properties:
|
|
- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate
|
|
phys are required.
|
|
- phy-names: Must be "pcie-phy".
|
|
|
|
Required sub-node:
|
|
- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI
|
|
interrupts.
|
|
|
|
Required properties for legacy-interrupt-controller:
|
|
- interrupt-controller: identifies the node as an interrupt controller.
|
|
- #interrupt-cells: specifies the number of cells needed to encode an
|
|
interrupt source. The value must be 1.
|
|
- interrupt-parent: Phandle to the parent interrupt controller.
|
|
- interrupts: An interrupt specifier for legacy interrupt.
|
|
|
|
Example:
|
|
|
|
pcie: pcie@66000000 {
|
|
compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
|
|
status = "disabled";
|
|
reg-names = "dbi", "link", "config";
|
|
reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
|
|
<0x2fff0000 0x10000>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
clocks = <&sys_clk 24>;
|
|
resets = <&sys_rst 24>;
|
|
num-lanes = <1>;
|
|
num-viewport = <1>;
|
|
bus-range = <0x0 0xff>;
|
|
device_type = "pci";
|
|
ranges =
|
|
/* downstream I/O */
|
|
<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000
|
|
/* non-prefetchable memory */
|
|
0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-names = "dma", "msi";
|
|
interrupts = <0 224 4>, <0 225 4>;
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */
|
|
<0 0 0 2 &pcie_intc 1>, /* INTB */
|
|
<0 0 0 3 &pcie_intc 2>, /* INTC */
|
|
<0 0 0 4 &pcie_intc 3>; /* INTD */
|
|
|
|
pcie_intc: legacy-interrupt-controller {
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 226 4>;
|
|
};
|
|
};
|