mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
00406e8772
The following commit prevents the MPC8548E on the XPedite5200 PrPMC
module from enumerating its PCI/PCI-X bus:
powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
The previous patch prevents any Freescale PCI-X bridge from enumerating
the bus, if it is hardware strapped into Agent mode.
In PCI-X, the Host is responsible for driving the PCI-X initialization
pattern to devices on the bus, so that they know whether to operate in
conventional PCI or PCI-X mode as well as what the bus timing will be.
For a PCI-X PrPMC, the pattern is driven by the mezzanine carrier it is
installed onto. Therefore, PrPMCs are PCI-X Agents, but one per system
may still enumerate the bus.
This patch causes the device node of any PCI/PCI-X bridge strapped into
Agent mode to be checked for the fsl,pci-agent-force-enum property. If
the property is present in the node, the bridge will be allowed to
enumerate the bus.
Cc: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
28 lines
811 B
Plaintext
28 lines
811 B
Plaintext
* Bus Enumeration by Freescale PCI-X Agent
|
|
|
|
Typically any Freescale PCI-X bridge hardware strapped into Agent mode
|
|
is prevented from enumerating the bus. The PrPMC form-factor requires
|
|
all mezzanines to be PCI-X Agents, but one per system may still
|
|
enumerate the bus.
|
|
|
|
The property defined below will allow a PCI-X bridge to be used for bus
|
|
enumeration despite being strapped into Agent mode.
|
|
|
|
Required properties:
|
|
- fsl,pci-agent-force-enum : There is no value associated with this
|
|
property. The property itself is treated as a boolean.
|
|
|
|
Example:
|
|
|
|
/* PCI-X bridge known to be PrPMC Monarch */
|
|
pci0: pci@ef008000 {
|
|
fsl,pci-agent-force-enum;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
|
|
device_type = "pci";
|
|
...
|
|
...
|
|
};
|