mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
6a7836ba7f
We want to work towards phasing out the at24_platform_data structure. There are few users and its contents can be represented using generic device properties. Using device properties only will allow us to significantly simplify the at24 configuration code. Remove the at24_platform_data structure and replace it with an array of property entries. Specify the exact model instead of the "at24" wildcard and drop the byte_len/size property, as the model name already implies the EEPROM's size. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
431 lines
10 KiB
C
431 lines
10 KiB
C
/*
|
|
* Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
|
|
* Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/property.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/eeprom.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/usb/ulpi.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include "common.h"
|
|
#include "devices-imx27.h"
|
|
#include "ehci.h"
|
|
#include "hardware.h"
|
|
#include "iomux-mx27.h"
|
|
#include "ulpi.h"
|
|
|
|
#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
|
|
#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
|
|
#define SPI1_SS0 (GPIO_PORTD + 28)
|
|
#define SPI1_SS1 (GPIO_PORTD + 27)
|
|
#define SD2_CD (GPIO_PORTC + 29)
|
|
|
|
static const int pca100_pins[] __initconst = {
|
|
/* UART1 */
|
|
PE12_PF_UART1_TXD,
|
|
PE13_PF_UART1_RXD,
|
|
PE14_PF_UART1_CTS,
|
|
PE15_PF_UART1_RTS,
|
|
/* SDHC */
|
|
PB4_PF_SD2_D0,
|
|
PB5_PF_SD2_D1,
|
|
PB6_PF_SD2_D2,
|
|
PB7_PF_SD2_D3,
|
|
PB8_PF_SD2_CMD,
|
|
PB9_PF_SD2_CLK,
|
|
SD2_CD | GPIO_GPIO | GPIO_IN,
|
|
/* FEC */
|
|
PD0_AIN_FEC_TXD0,
|
|
PD1_AIN_FEC_TXD1,
|
|
PD2_AIN_FEC_TXD2,
|
|
PD3_AIN_FEC_TXD3,
|
|
PD4_AOUT_FEC_RX_ER,
|
|
PD5_AOUT_FEC_RXD1,
|
|
PD6_AOUT_FEC_RXD2,
|
|
PD7_AOUT_FEC_RXD3,
|
|
PD8_AF_FEC_MDIO,
|
|
PD9_AIN_FEC_MDC,
|
|
PD10_AOUT_FEC_CRS,
|
|
PD11_AOUT_FEC_TX_CLK,
|
|
PD12_AOUT_FEC_RXD0,
|
|
PD13_AOUT_FEC_RX_DV,
|
|
PD14_AOUT_FEC_RX_CLK,
|
|
PD15_AOUT_FEC_COL,
|
|
PD16_AIN_FEC_TX_ER,
|
|
PF23_AIN_FEC_TX_EN,
|
|
/* SSI1 */
|
|
PC20_PF_SSI1_FS,
|
|
PC21_PF_SSI1_RXD,
|
|
PC22_PF_SSI1_TXD,
|
|
PC23_PF_SSI1_CLK,
|
|
/* onboard I2C */
|
|
PC5_PF_I2C2_SDA,
|
|
PC6_PF_I2C2_SCL,
|
|
/* external I2C */
|
|
PD17_PF_I2C_DATA,
|
|
PD18_PF_I2C_CLK,
|
|
/* SPI1 */
|
|
PD25_PF_CSPI1_RDY,
|
|
PD29_PF_CSPI1_SCLK,
|
|
PD30_PF_CSPI1_MISO,
|
|
PD31_PF_CSPI1_MOSI,
|
|
/* OTG */
|
|
OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
|
|
PC7_PF_USBOTG_DATA5,
|
|
PC8_PF_USBOTG_DATA6,
|
|
PC9_PF_USBOTG_DATA0,
|
|
PC10_PF_USBOTG_DATA2,
|
|
PC11_PF_USBOTG_DATA1,
|
|
PC12_PF_USBOTG_DATA4,
|
|
PC13_PF_USBOTG_DATA3,
|
|
PE0_PF_USBOTG_NXT,
|
|
PE1_PF_USBOTG_STP,
|
|
PE2_PF_USBOTG_DIR,
|
|
PE24_PF_USBOTG_CLK,
|
|
PE25_PF_USBOTG_DATA7,
|
|
/* USBH2 */
|
|
USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
|
|
PA0_PF_USBH2_CLK,
|
|
PA1_PF_USBH2_DIR,
|
|
PA2_PF_USBH2_DATA7,
|
|
PA3_PF_USBH2_NXT,
|
|
PA4_PF_USBH2_STP,
|
|
PD19_AF_USBH2_DATA4,
|
|
PD20_AF_USBH2_DATA3,
|
|
PD21_AF_USBH2_DATA6,
|
|
PD22_AF_USBH2_DATA0,
|
|
PD23_AF_USBH2_DATA2,
|
|
PD24_AF_USBH2_DATA1,
|
|
PD26_AF_USBH2_DATA5,
|
|
/* display */
|
|
PA5_PF_LSCLK,
|
|
PA6_PF_LD0,
|
|
PA7_PF_LD1,
|
|
PA8_PF_LD2,
|
|
PA9_PF_LD3,
|
|
PA10_PF_LD4,
|
|
PA11_PF_LD5,
|
|
PA12_PF_LD6,
|
|
PA13_PF_LD7,
|
|
PA14_PF_LD8,
|
|
PA15_PF_LD9,
|
|
PA16_PF_LD10,
|
|
PA17_PF_LD11,
|
|
PA18_PF_LD12,
|
|
PA19_PF_LD13,
|
|
PA20_PF_LD14,
|
|
PA21_PF_LD15,
|
|
PA22_PF_LD16,
|
|
PA23_PF_LD17,
|
|
PA26_PF_PS,
|
|
PA28_PF_HSYNC,
|
|
PA29_PF_VSYNC,
|
|
PA31_PF_OE_ACD,
|
|
/* free GPIO */
|
|
GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
|
|
GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
|
|
GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
|
|
};
|
|
|
|
static const struct imxuart_platform_data uart_pdata __initconst = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
static const struct mxc_nand_platform_data
|
|
pca100_nand_board_info __initconst = {
|
|
.width = 1,
|
|
.hw_ecc = 1,
|
|
};
|
|
|
|
static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
|
|
.bitrate = 100000,
|
|
};
|
|
|
|
static const struct property_entry board_eeprom_properties[] = {
|
|
PROPERTY_ENTRY_U32("pagesize", 32),
|
|
{ }
|
|
};
|
|
|
|
static struct i2c_board_info pca100_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
|
|
.properties = board_eeprom_properties,
|
|
}, {
|
|
I2C_BOARD_INFO("pcf8563", 0x51),
|
|
}, {
|
|
I2C_BOARD_INFO("lm75", 0x4a),
|
|
}
|
|
};
|
|
|
|
static struct spi_eeprom at25320 = {
|
|
.name = "at25320an",
|
|
.byte_len = 4096,
|
|
.page_size = 32,
|
|
.flags = EE_ADDR2,
|
|
};
|
|
|
|
static struct spi_board_info pca100_spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "at25",
|
|
.max_speed_hz = 30000,
|
|
.bus_num = 0,
|
|
.chip_select = 1,
|
|
.platform_data = &at25320,
|
|
},
|
|
};
|
|
|
|
static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};
|
|
|
|
static const struct spi_imx_master pca100_spi0_data __initconst = {
|
|
.chipselect = pca100_spi_cs,
|
|
.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
|
|
};
|
|
|
|
static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
|
|
{
|
|
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
|
|
gpio_set_value(GPIO_PORTC + 20, 1);
|
|
udelay(2);
|
|
gpio_set_value(GPIO_PORTC + 20, 0);
|
|
mxc_gpio_mode(PC20_PF_SSI1_FS);
|
|
msleep(2);
|
|
}
|
|
|
|
static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
|
|
{
|
|
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
|
|
gpio_set_value(GPIO_PORTC + 20, 0);
|
|
mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */
|
|
gpio_set_value(GPIO_PORTC + 22, 0);
|
|
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */
|
|
gpio_set_value(GPIO_PORTC + 28, 0);
|
|
udelay(10);
|
|
gpio_set_value(GPIO_PORTC + 28, 1);
|
|
mxc_gpio_mode(PC20_PF_SSI1_FS);
|
|
mxc_gpio_mode(PC22_PF_SSI1_TXD);
|
|
msleep(2);
|
|
}
|
|
|
|
static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
|
|
.ac97_reset = pca100_ac97_cold_reset,
|
|
.ac97_warm_reset = pca100_ac97_warm_reset,
|
|
.flags = IMX_SSI_USE_AC97,
|
|
};
|
|
|
|
static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
|
|
void *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
|
|
IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
|
|
if (ret)
|
|
printk(KERN_ERR
|
|
"pca100: Failed to request irq for sd/mmc detection\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void pca100_sdhc2_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
|
|
}
|
|
|
|
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
|
|
.init = pca100_sdhc2_init,
|
|
.exit = pca100_sdhc2_exit,
|
|
};
|
|
|
|
static int otg_phy_init(struct platform_device *pdev)
|
|
{
|
|
gpio_set_value(OTG_PHY_CS_GPIO, 0);
|
|
|
|
mdelay(10);
|
|
|
|
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
|
|
}
|
|
|
|
static struct mxc_usbh_platform_data otg_pdata __initdata = {
|
|
.init = otg_phy_init,
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
};
|
|
|
|
static int usbh2_phy_init(struct platform_device *pdev)
|
|
{
|
|
gpio_set_value(USBH2_PHY_CS_GPIO, 0);
|
|
|
|
mdelay(10);
|
|
|
|
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
|
|
}
|
|
|
|
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
|
|
.init = usbh2_phy_init,
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
};
|
|
|
|
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
|
|
.operating_mode = FSL_USB2_DR_DEVICE,
|
|
.phy_mode = FSL_USB2_PHY_ULPI,
|
|
};
|
|
|
|
static bool otg_mode_host __initdata;
|
|
|
|
static int __init pca100_otg_mode(char *options)
|
|
{
|
|
if (!strcmp(options, "host"))
|
|
otg_mode_host = true;
|
|
else if (!strcmp(options, "device"))
|
|
otg_mode_host = false;
|
|
else
|
|
pr_info("otg_mode neither \"host\" nor \"device\". "
|
|
"Defaulting to device\n");
|
|
return 1;
|
|
}
|
|
__setup("otg_mode=", pca100_otg_mode);
|
|
|
|
/* framebuffer info */
|
|
static struct imx_fb_videomode pca100_fb_modes[] = {
|
|
{
|
|
.mode = {
|
|
.name = "EMERGING-ETV570G0DHU",
|
|
.refresh = 60,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.pixclock = 39722, /* in ps (25.175 MHz) */
|
|
.hsync_len = 30,
|
|
.left_margin = 114,
|
|
.right_margin = 16,
|
|
.vsync_len = 3,
|
|
.upper_margin = 32,
|
|
.lower_margin = 0,
|
|
},
|
|
/*
|
|
* TFT
|
|
* Pixel pol active high
|
|
* HSYNC active low
|
|
* VSYNC active low
|
|
* use HSYNC for ACD count
|
|
* line clock disable while idle
|
|
* always enable line clock even if no data
|
|
*/
|
|
.pcr = 0xf0c08080,
|
|
.bpp = 16,
|
|
},
|
|
};
|
|
|
|
static const struct imx_fb_platform_data pca100_fb_data __initconst = {
|
|
.mode = pca100_fb_modes,
|
|
.num_modes = ARRAY_SIZE(pca100_fb_modes),
|
|
|
|
.pwmr = 0x00A903FF,
|
|
.lscr1 = 0x00120300,
|
|
.dmacr = 0x00020010,
|
|
};
|
|
|
|
static void __init pca100_init(void)
|
|
{
|
|
int ret;
|
|
|
|
imx27_soc_init();
|
|
|
|
ret = mxc_gpio_setup_multiple_pins(pca100_pins,
|
|
ARRAY_SIZE(pca100_pins), "PCA100");
|
|
if (ret)
|
|
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
|
|
|
|
imx27_add_imx_uart0(&uart_pdata);
|
|
|
|
imx27_add_mxc_nand(&pca100_nand_board_info);
|
|
|
|
/* only the i2c master 1 is used on this CPU card */
|
|
i2c_register_board_info(1, pca100_i2c_devices,
|
|
ARRAY_SIZE(pca100_i2c_devices));
|
|
|
|
imx27_add_imx_i2c(1, &pca100_i2c1_data);
|
|
|
|
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
|
|
mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
|
|
spi_register_board_info(pca100_spi_board_info,
|
|
ARRAY_SIZE(pca100_spi_board_info));
|
|
imx27_add_spi_imx0(&pca100_spi0_data);
|
|
|
|
imx27_add_imx_fb(&pca100_fb_data);
|
|
|
|
imx27_add_fec(NULL);
|
|
imx27_add_imx2_wdt();
|
|
imx27_add_mxc_w1();
|
|
}
|
|
|
|
static void __init pca100_late_init(void)
|
|
{
|
|
imx27_add_imx_ssi(0, &pca100_ssi_pdata);
|
|
|
|
imx27_add_mxc_mmc(1, &sdhc_pdata);
|
|
|
|
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
|
|
gpio_direction_output(OTG_PHY_CS_GPIO, 1);
|
|
gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
|
|
gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
|
|
|
|
if (otg_mode_host) {
|
|
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
|
|
ULPI_OTG_DRVVBUS_EXT);
|
|
|
|
if (otg_pdata.otg)
|
|
imx27_add_mxc_ehci_otg(&otg_pdata);
|
|
} else {
|
|
gpio_set_value(OTG_PHY_CS_GPIO, 0);
|
|
imx27_add_fsl_usb2_udc(&otg_device_pdata);
|
|
}
|
|
|
|
usbh2_pdata.otg = imx_otg_ulpi_create(
|
|
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
|
|
|
|
if (usbh2_pdata.otg)
|
|
imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
|
|
}
|
|
|
|
static void __init pca100_timer_init(void)
|
|
{
|
|
mx27_clocks_init(26000000);
|
|
}
|
|
|
|
MACHINE_START(PCA100, "phyCARD-i.MX27")
|
|
.atag_offset = 0x100,
|
|
.map_io = mx27_map_io,
|
|
.init_early = imx27_init_early,
|
|
.init_irq = mx27_init_irq,
|
|
.init_machine = pca100_init,
|
|
.init_late = pca100_late_init,
|
|
.init_time = pca100_timer_init,
|
|
.restart = mxc_restart,
|
|
MACHINE_END
|