mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 02:54:10 +07:00
f8b410e369
This renames the "gpio-aspeed" driver to conform with other
GPIO drivers as "gpio-aspeed-sgpio.c". All GPIO drivers
should start with the string "gpio-" no special exceptions.
Also the Kconfig and Makefile entries should normally
go with the driver but I missed this in my review, sorry
for mistake. "CONFIG_GPIO_ASPEED_SGPIO" is used to
activate this driver.
Cc: Hongwei Zhang <hongweiz@ami.com>
Fixes: 7db47faae7
("gpio: aspeed: Add SGPIO driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20190927114833.12551-1-linus.walleij@linaro.org
534 lines
13 KiB
C
534 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright 2019 American Megatrends International LLC.
|
|
*
|
|
* Author: Karthikeyan Mani <karthikeyanm@amiindia.co.in>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/hashtable.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/string.h>
|
|
|
|
#define MAX_NR_SGPIO 80
|
|
|
|
#define ASPEED_SGPIO_CTRL 0x54
|
|
|
|
#define ASPEED_SGPIO_PINS_MASK GENMASK(9, 6)
|
|
#define ASPEED_SGPIO_CLK_DIV_MASK GENMASK(31, 16)
|
|
#define ASPEED_SGPIO_ENABLE BIT(0)
|
|
|
|
struct aspeed_sgpio {
|
|
struct gpio_chip chip;
|
|
struct clk *pclk;
|
|
spinlock_t lock;
|
|
void __iomem *base;
|
|
uint32_t dir_in[3];
|
|
int irq;
|
|
};
|
|
|
|
struct aspeed_sgpio_bank {
|
|
uint16_t val_regs;
|
|
uint16_t rdata_reg;
|
|
uint16_t irq_regs;
|
|
const char names[4][3];
|
|
};
|
|
|
|
/*
|
|
* Note: The "value" register returns the input value when the GPIO is
|
|
* configured as an input.
|
|
*
|
|
* The "rdata" register returns the output value when the GPIO is
|
|
* configured as an output.
|
|
*/
|
|
static const struct aspeed_sgpio_bank aspeed_sgpio_banks[] = {
|
|
{
|
|
.val_regs = 0x0000,
|
|
.rdata_reg = 0x0070,
|
|
.irq_regs = 0x0004,
|
|
.names = { "A", "B", "C", "D" },
|
|
},
|
|
{
|
|
.val_regs = 0x001C,
|
|
.rdata_reg = 0x0074,
|
|
.irq_regs = 0x0020,
|
|
.names = { "E", "F", "G", "H" },
|
|
},
|
|
{
|
|
.val_regs = 0x0038,
|
|
.rdata_reg = 0x0078,
|
|
.irq_regs = 0x003C,
|
|
.names = { "I", "J" },
|
|
},
|
|
};
|
|
|
|
enum aspeed_sgpio_reg {
|
|
reg_val,
|
|
reg_rdata,
|
|
reg_irq_enable,
|
|
reg_irq_type0,
|
|
reg_irq_type1,
|
|
reg_irq_type2,
|
|
reg_irq_status,
|
|
};
|
|
|
|
#define GPIO_VAL_VALUE 0x00
|
|
#define GPIO_IRQ_ENABLE 0x00
|
|
#define GPIO_IRQ_TYPE0 0x04
|
|
#define GPIO_IRQ_TYPE1 0x08
|
|
#define GPIO_IRQ_TYPE2 0x0C
|
|
#define GPIO_IRQ_STATUS 0x10
|
|
|
|
static void __iomem *bank_reg(struct aspeed_sgpio *gpio,
|
|
const struct aspeed_sgpio_bank *bank,
|
|
const enum aspeed_sgpio_reg reg)
|
|
{
|
|
switch (reg) {
|
|
case reg_val:
|
|
return gpio->base + bank->val_regs + GPIO_VAL_VALUE;
|
|
case reg_rdata:
|
|
return gpio->base + bank->rdata_reg;
|
|
case reg_irq_enable:
|
|
return gpio->base + bank->irq_regs + GPIO_IRQ_ENABLE;
|
|
case reg_irq_type0:
|
|
return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE0;
|
|
case reg_irq_type1:
|
|
return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE1;
|
|
case reg_irq_type2:
|
|
return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE2;
|
|
case reg_irq_status:
|
|
return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS;
|
|
default:
|
|
/* acturally if code runs to here, it's an error case */
|
|
BUG_ON(1);
|
|
}
|
|
}
|
|
|
|
#define GPIO_BANK(x) ((x) >> 5)
|
|
#define GPIO_OFFSET(x) ((x) & 0x1f)
|
|
#define GPIO_BIT(x) BIT(GPIO_OFFSET(x))
|
|
|
|
static const struct aspeed_sgpio_bank *to_bank(unsigned int offset)
|
|
{
|
|
unsigned int bank = GPIO_BANK(offset);
|
|
|
|
WARN_ON(bank >= ARRAY_SIZE(aspeed_sgpio_banks));
|
|
return &aspeed_sgpio_banks[bank];
|
|
}
|
|
|
|
static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
|
|
const struct aspeed_sgpio_bank *bank = to_bank(offset);
|
|
unsigned long flags;
|
|
enum aspeed_sgpio_reg reg;
|
|
bool is_input;
|
|
int rc = 0;
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
is_input = gpio->dir_in[GPIO_BANK(offset)] & GPIO_BIT(offset);
|
|
reg = is_input ? reg_val : reg_rdata;
|
|
rc = !!(ioread32(bank_reg(gpio, bank, reg)) & GPIO_BIT(offset));
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void sgpio_set_value(struct gpio_chip *gc, unsigned int offset, int val)
|
|
{
|
|
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
|
|
const struct aspeed_sgpio_bank *bank = to_bank(offset);
|
|
void __iomem *addr;
|
|
u32 reg = 0;
|
|
|
|
addr = bank_reg(gpio, bank, reg_val);
|
|
reg = ioread32(addr);
|
|
|
|
if (val)
|
|
reg |= GPIO_BIT(offset);
|
|
else
|
|
reg &= ~GPIO_BIT(offset);
|
|
|
|
iowrite32(reg, addr);
|
|
}
|
|
|
|
static void aspeed_sgpio_set(struct gpio_chip *gc, unsigned int offset, int val)
|
|
{
|
|
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
sgpio_set_value(gc, offset, val);
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
}
|
|
|
|
static int aspeed_sgpio_dir_in(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
gpio->dir_in[GPIO_BANK(offset)] |= GPIO_BIT(offset);
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aspeed_sgpio_dir_out(struct gpio_chip *gc, unsigned int offset, int val)
|
|
{
|
|
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
gpio->dir_in[GPIO_BANK(offset)] &= ~GPIO_BIT(offset);
|
|
sgpio_set_value(gc, offset, val);
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aspeed_sgpio_get_direction(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
int dir_status;
|
|
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
dir_status = gpio->dir_in[GPIO_BANK(offset)] & GPIO_BIT(offset);
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
|
|
return dir_status;
|
|
|
|
}
|
|
|
|
static void irqd_to_aspeed_sgpio_data(struct irq_data *d,
|
|
struct aspeed_sgpio **gpio,
|
|
const struct aspeed_sgpio_bank **bank,
|
|
u32 *bit, int *offset)
|
|
{
|
|
struct aspeed_sgpio *internal;
|
|
|
|
*offset = irqd_to_hwirq(d);
|
|
internal = irq_data_get_irq_chip_data(d);
|
|
WARN_ON(!internal);
|
|
|
|
*gpio = internal;
|
|
*bank = to_bank(*offset);
|
|
*bit = GPIO_BIT(*offset);
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_ack(struct irq_data *d)
|
|
{
|
|
const struct aspeed_sgpio_bank *bank;
|
|
struct aspeed_sgpio *gpio;
|
|
unsigned long flags;
|
|
void __iomem *status_addr;
|
|
int offset;
|
|
u32 bit;
|
|
|
|
irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
|
|
|
|
status_addr = bank_reg(gpio, bank, reg_irq_status);
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
iowrite32(bit, status_addr);
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_set_mask(struct irq_data *d, bool set)
|
|
{
|
|
const struct aspeed_sgpio_bank *bank;
|
|
struct aspeed_sgpio *gpio;
|
|
unsigned long flags;
|
|
u32 reg, bit;
|
|
void __iomem *addr;
|
|
int offset;
|
|
|
|
irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
|
|
addr = bank_reg(gpio, bank, reg_irq_enable);
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
reg = ioread32(addr);
|
|
if (set)
|
|
reg |= bit;
|
|
else
|
|
reg &= ~bit;
|
|
|
|
iowrite32(reg, addr);
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_mask(struct irq_data *d)
|
|
{
|
|
aspeed_sgpio_irq_set_mask(d, false);
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
aspeed_sgpio_irq_set_mask(d, true);
|
|
}
|
|
|
|
static int aspeed_sgpio_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
u32 type0 = 0;
|
|
u32 type1 = 0;
|
|
u32 type2 = 0;
|
|
u32 bit, reg;
|
|
const struct aspeed_sgpio_bank *bank;
|
|
irq_flow_handler_t handler;
|
|
struct aspeed_sgpio *gpio;
|
|
unsigned long flags;
|
|
void __iomem *addr;
|
|
int offset;
|
|
|
|
irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
|
|
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
type2 |= bit;
|
|
/* fall through */
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
type0 |= bit;
|
|
/* fall through */
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
handler = handle_edge_irq;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
type0 |= bit;
|
|
/* fall through */
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
type1 |= bit;
|
|
handler = handle_level_irq;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
addr = bank_reg(gpio, bank, reg_irq_type0);
|
|
reg = ioread32(addr);
|
|
reg = (reg & ~bit) | type0;
|
|
iowrite32(reg, addr);
|
|
|
|
addr = bank_reg(gpio, bank, reg_irq_type1);
|
|
reg = ioread32(addr);
|
|
reg = (reg & ~bit) | type1;
|
|
iowrite32(reg, addr);
|
|
|
|
addr = bank_reg(gpio, bank, reg_irq_type2);
|
|
reg = ioread32(addr);
|
|
reg = (reg & ~bit) | type2;
|
|
iowrite32(reg, addr);
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
|
|
irq_set_handler_locked(d, handler);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *ic = irq_desc_get_chip(desc);
|
|
struct aspeed_sgpio *data = gpiochip_get_data(gc);
|
|
unsigned int i, p, girq;
|
|
unsigned long reg;
|
|
|
|
chained_irq_enter(ic, desc);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
|
|
const struct aspeed_sgpio_bank *bank = &aspeed_sgpio_banks[i];
|
|
|
|
reg = ioread32(bank_reg(data, bank, reg_irq_status));
|
|
|
|
for_each_set_bit(p, ®, 32) {
|
|
girq = irq_find_mapping(gc->irq.domain, i * 32 + p);
|
|
generic_handle_irq(girq);
|
|
}
|
|
|
|
}
|
|
|
|
chained_irq_exit(ic, desc);
|
|
}
|
|
|
|
static struct irq_chip aspeed_sgpio_irqchip = {
|
|
.name = "aspeed-sgpio",
|
|
.irq_ack = aspeed_sgpio_irq_ack,
|
|
.irq_mask = aspeed_sgpio_irq_mask,
|
|
.irq_unmask = aspeed_sgpio_irq_unmask,
|
|
.irq_set_type = aspeed_sgpio_set_type,
|
|
};
|
|
|
|
static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
|
|
struct platform_device *pdev)
|
|
{
|
|
int rc, i;
|
|
const struct aspeed_sgpio_bank *bank;
|
|
struct gpio_irq_chip *irq;
|
|
|
|
rc = platform_get_irq(pdev, 0);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
gpio->irq = rc;
|
|
|
|
/* Disable IRQ and clear Interrupt status registers for all SPGIO Pins. */
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
|
|
bank = &aspeed_sgpio_banks[i];
|
|
/* disable irq enable bits */
|
|
iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_enable));
|
|
/* clear status bits */
|
|
iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_status));
|
|
}
|
|
|
|
irq = &gpio->chip.irq;
|
|
irq->chip = &aspeed_sgpio_irqchip;
|
|
irq->handler = handle_bad_irq;
|
|
irq->default_type = IRQ_TYPE_NONE;
|
|
irq->parent_handler = aspeed_sgpio_irq_handler;
|
|
irq->parent_handler_data = gpio;
|
|
irq->parents = &gpio->irq;
|
|
irq->num_parents = 1;
|
|
|
|
/* set IRQ settings and Enable Interrupt */
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
|
|
bank = &aspeed_sgpio_banks[i];
|
|
/* set falling or level-low irq */
|
|
iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type0));
|
|
/* trigger type is edge */
|
|
iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type1));
|
|
/* dual edge trigger mode. */
|
|
iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_type2));
|
|
/* enable irq */
|
|
iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_enable));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id aspeed_sgpio_of_table[] = {
|
|
{ .compatible = "aspeed,ast2400-sgpio" },
|
|
{ .compatible = "aspeed,ast2500-sgpio" },
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, aspeed_sgpio_of_table);
|
|
|
|
static int __init aspeed_sgpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct aspeed_sgpio *gpio;
|
|
u32 nr_gpios, sgpio_freq, sgpio_clk_div;
|
|
int rc;
|
|
unsigned long apb_freq;
|
|
|
|
gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
|
|
if (!gpio)
|
|
return -ENOMEM;
|
|
|
|
gpio->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(gpio->base))
|
|
return PTR_ERR(gpio->base);
|
|
|
|
rc = of_property_read_u32(pdev->dev.of_node, "ngpios", &nr_gpios);
|
|
if (rc < 0) {
|
|
dev_err(&pdev->dev, "Could not read ngpios property\n");
|
|
return -EINVAL;
|
|
} else if (nr_gpios > MAX_NR_SGPIO) {
|
|
dev_err(&pdev->dev, "Number of GPIOs exceeds the maximum of %d: %d\n",
|
|
MAX_NR_SGPIO, nr_gpios);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rc = of_property_read_u32(pdev->dev.of_node, "bus-frequency", &sgpio_freq);
|
|
if (rc < 0) {
|
|
dev_err(&pdev->dev, "Could not read bus-frequency property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio->pclk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(gpio->pclk)) {
|
|
dev_err(&pdev->dev, "devm_clk_get failed\n");
|
|
return PTR_ERR(gpio->pclk);
|
|
}
|
|
|
|
apb_freq = clk_get_rate(gpio->pclk);
|
|
|
|
/*
|
|
* From the datasheet,
|
|
* SGPIO period = 1/PCLK * 2 * (GPIO254[31:16] + 1)
|
|
* period = 2 * (GPIO254[31:16] + 1) / PCLK
|
|
* frequency = 1 / (2 * (GPIO254[31:16] + 1) / PCLK)
|
|
* frequency = PCLK / (2 * (GPIO254[31:16] + 1))
|
|
* frequency * 2 * (GPIO254[31:16] + 1) = PCLK
|
|
* GPIO254[31:16] = PCLK / (frequency * 2) - 1
|
|
*/
|
|
if (sgpio_freq == 0)
|
|
return -EINVAL;
|
|
|
|
sgpio_clk_div = (apb_freq / (sgpio_freq * 2)) - 1;
|
|
|
|
if (sgpio_clk_div > (1 << 16) - 1)
|
|
return -EINVAL;
|
|
|
|
iowrite32(FIELD_PREP(ASPEED_SGPIO_CLK_DIV_MASK, sgpio_clk_div) |
|
|
FIELD_PREP(ASPEED_SGPIO_PINS_MASK, (nr_gpios / 8)) |
|
|
ASPEED_SGPIO_ENABLE,
|
|
gpio->base + ASPEED_SGPIO_CTRL);
|
|
|
|
spin_lock_init(&gpio->lock);
|
|
|
|
gpio->chip.parent = &pdev->dev;
|
|
gpio->chip.ngpio = nr_gpios;
|
|
gpio->chip.direction_input = aspeed_sgpio_dir_in;
|
|
gpio->chip.direction_output = aspeed_sgpio_dir_out;
|
|
gpio->chip.get_direction = aspeed_sgpio_get_direction;
|
|
gpio->chip.request = NULL;
|
|
gpio->chip.free = NULL;
|
|
gpio->chip.get = aspeed_sgpio_get;
|
|
gpio->chip.set = aspeed_sgpio_set;
|
|
gpio->chip.set_config = NULL;
|
|
gpio->chip.label = dev_name(&pdev->dev);
|
|
gpio->chip.base = -1;
|
|
|
|
/* set all SGPIO pins as input (1). */
|
|
memset(gpio->dir_in, 0xff, sizeof(gpio->dir_in));
|
|
|
|
aspeed_sgpio_setup_irqs(gpio, pdev);
|
|
|
|
rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver aspeed_sgpio_driver = {
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.of_match_table = aspeed_sgpio_of_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(aspeed_sgpio_driver, aspeed_sgpio_probe);
|
|
MODULE_DESCRIPTION("Aspeed Serial GPIO Driver");
|
|
MODULE_LICENSE("GPL");
|