mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 03:35:27 +07:00
e501b3d87f
Per the AGP 3.0 spec, APBASE is a standard PCI BAR and may be either 32 bits or 64 bits wide. Many drivers read APBASE directly, but they only handled 32-bit BARs. The PCI core reads APBASE at enumeration-time. Use pci_bus_address() instead of reading it again in the driver. This works correctly for both 32-bit and 64-bit BARs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
479 lines
12 KiB
C
479 lines
12 KiB
C
/*
|
|
* Transmeta's Efficeon AGPGART driver.
|
|
*
|
|
* Based upon a diff by Linus around November '02.
|
|
*
|
|
* Ported to the 2.6 kernel by Carlos Puchol <cpglinux@puchol.com>
|
|
* and H. Peter Anvin <hpa@transmeta.com>.
|
|
*/
|
|
|
|
/*
|
|
* NOTE-cpg-040217:
|
|
*
|
|
* - when compiled as a module, after loading the module,
|
|
* it will refuse to unload, indicating it is in use,
|
|
* when it is not.
|
|
* - no s3 (suspend to ram) testing.
|
|
* - tested on the efficeon integrated nothbridge for tens
|
|
* of iterations of starting x and glxgears.
|
|
* - tested with radeon 9000 and radeon mobility m9 cards
|
|
* - tested with c3/c4 enabled (with the mobility m9 card)
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/agp_backend.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/page-flags.h>
|
|
#include <linux/mm.h>
|
|
#include "agp.h"
|
|
#include "intel-agp.h"
|
|
|
|
/*
|
|
* The real differences to the generic AGP code is
|
|
* in the GART mappings - a two-level setup with the
|
|
* first level being an on-chip 64-entry table.
|
|
*
|
|
* The page array is filled through the ATTPAGE register
|
|
* (Aperture Translation Table Page Register) at 0xB8. Bits:
|
|
* 31:20: physical page address
|
|
* 11:9: Page Attribute Table Index (PATI)
|
|
* must match the PAT index for the
|
|
* mapped pages (the 2nd level page table pages
|
|
* themselves should be just regular WB-cacheable,
|
|
* so this is normally zero.)
|
|
* 8: Present
|
|
* 7:6: reserved, write as zero
|
|
* 5:0: GATT directory index: which 1st-level entry
|
|
*
|
|
* The Efficeon AGP spec requires pages to be WB-cacheable
|
|
* but to be explicitly CLFLUSH'd after any changes.
|
|
*/
|
|
#define EFFICEON_ATTPAGE 0xb8
|
|
#define EFFICEON_L1_SIZE 64 /* Number of PDE pages */
|
|
|
|
#define EFFICEON_PATI (0 << 9)
|
|
#define EFFICEON_PRESENT (1 << 8)
|
|
|
|
static struct _efficeon_private {
|
|
unsigned long l1_table[EFFICEON_L1_SIZE];
|
|
} efficeon_private;
|
|
|
|
static const struct gatt_mask efficeon_generic_masks[] =
|
|
{
|
|
{.mask = 0x00000001, .type = 0}
|
|
};
|
|
|
|
/* This function does the same thing as mask_memory() for this chipset... */
|
|
static inline unsigned long efficeon_mask_memory(struct page *page)
|
|
{
|
|
unsigned long addr = page_to_phys(page);
|
|
return addr | 0x00000001;
|
|
}
|
|
|
|
static const struct aper_size_info_lvl2 efficeon_generic_sizes[4] =
|
|
{
|
|
{256, 65536, 0},
|
|
{128, 32768, 32},
|
|
{64, 16384, 48},
|
|
{32, 8192, 56}
|
|
};
|
|
|
|
/*
|
|
* Control interfaces are largely identical to
|
|
* the legacy Intel 440BX..
|
|
*/
|
|
|
|
static int efficeon_fetch_size(void)
|
|
{
|
|
int i;
|
|
u16 temp;
|
|
struct aper_size_info_lvl2 *values;
|
|
|
|
pci_read_config_word(agp_bridge->dev, INTEL_APSIZE, &temp);
|
|
values = A_SIZE_LVL2(agp_bridge->driver->aperture_sizes);
|
|
|
|
for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
|
|
if (temp == values[i].size_value) {
|
|
agp_bridge->previous_size =
|
|
agp_bridge->current_size = (void *) (values + i);
|
|
agp_bridge->aperture_size_idx = i;
|
|
return values[i].size;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void efficeon_tlbflush(struct agp_memory * mem)
|
|
{
|
|
printk(KERN_DEBUG PFX "efficeon_tlbflush()\n");
|
|
pci_write_config_dword(agp_bridge->dev, INTEL_AGPCTRL, 0x2200);
|
|
pci_write_config_dword(agp_bridge->dev, INTEL_AGPCTRL, 0x2280);
|
|
}
|
|
|
|
static void efficeon_cleanup(void)
|
|
{
|
|
u16 temp;
|
|
struct aper_size_info_lvl2 *previous_size;
|
|
|
|
printk(KERN_DEBUG PFX "efficeon_cleanup()\n");
|
|
previous_size = A_SIZE_LVL2(agp_bridge->previous_size);
|
|
pci_read_config_word(agp_bridge->dev, INTEL_NBXCFG, &temp);
|
|
pci_write_config_word(agp_bridge->dev, INTEL_NBXCFG, temp & ~(1 << 9));
|
|
pci_write_config_word(agp_bridge->dev, INTEL_APSIZE,
|
|
previous_size->size_value);
|
|
}
|
|
|
|
static int efficeon_configure(void)
|
|
{
|
|
u16 temp2;
|
|
struct aper_size_info_lvl2 *current_size;
|
|
|
|
printk(KERN_DEBUG PFX "efficeon_configure()\n");
|
|
|
|
current_size = A_SIZE_LVL2(agp_bridge->current_size);
|
|
|
|
/* aperture size */
|
|
pci_write_config_word(agp_bridge->dev, INTEL_APSIZE,
|
|
current_size->size_value);
|
|
|
|
/* address to map to */
|
|
agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
|
|
AGP_APERTURE_BAR);
|
|
|
|
/* agpctrl */
|
|
pci_write_config_dword(agp_bridge->dev, INTEL_AGPCTRL, 0x2280);
|
|
|
|
/* paccfg/nbxcfg */
|
|
pci_read_config_word(agp_bridge->dev, INTEL_NBXCFG, &temp2);
|
|
pci_write_config_word(agp_bridge->dev, INTEL_NBXCFG,
|
|
(temp2 & ~(1 << 10)) | (1 << 9) | (1 << 11));
|
|
/* clear any possible error conditions */
|
|
pci_write_config_byte(agp_bridge->dev, INTEL_ERRSTS + 1, 7);
|
|
return 0;
|
|
}
|
|
|
|
static int efficeon_free_gatt_table(struct agp_bridge_data *bridge)
|
|
{
|
|
int index, freed = 0;
|
|
|
|
for (index = 0; index < EFFICEON_L1_SIZE; index++) {
|
|
unsigned long page = efficeon_private.l1_table[index];
|
|
if (page) {
|
|
efficeon_private.l1_table[index] = 0;
|
|
ClearPageReserved(virt_to_page((char *)page));
|
|
free_page(page);
|
|
freed++;
|
|
}
|
|
printk(KERN_DEBUG PFX "efficeon_free_gatt_table(%p, %02x, %08x)\n",
|
|
agp_bridge->dev, EFFICEON_ATTPAGE, index);
|
|
pci_write_config_dword(agp_bridge->dev,
|
|
EFFICEON_ATTPAGE, index);
|
|
}
|
|
printk(KERN_DEBUG PFX "efficeon_free_gatt_table() freed %d pages\n", freed);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Since we don't need contiguous memory we just try
|
|
* to get the gatt table once
|
|
*/
|
|
|
|
#define GET_PAGE_DIR_OFF(addr) (addr >> 22)
|
|
#define GET_PAGE_DIR_IDX(addr) (GET_PAGE_DIR_OFF(addr) - \
|
|
GET_PAGE_DIR_OFF(agp_bridge->gart_bus_addr))
|
|
#define GET_GATT_OFF(addr) ((addr & 0x003ff000) >> 12)
|
|
#undef GET_GATT
|
|
#define GET_GATT(addr) (efficeon_private.gatt_pages[\
|
|
GET_PAGE_DIR_IDX(addr)]->remapped)
|
|
|
|
static int efficeon_create_gatt_table(struct agp_bridge_data *bridge)
|
|
{
|
|
int index;
|
|
const int pati = EFFICEON_PATI;
|
|
const int present = EFFICEON_PRESENT;
|
|
const int clflush_chunk = ((cpuid_ebx(1) >> 8) & 0xff) << 3;
|
|
int num_entries, l1_pages;
|
|
|
|
num_entries = A_SIZE_LVL2(agp_bridge->current_size)->num_entries;
|
|
|
|
printk(KERN_DEBUG PFX "efficeon_create_gatt_table(%d)\n", num_entries);
|
|
|
|
/* There are 2^10 PTE pages per PDE page */
|
|
BUG_ON(num_entries & 0x3ff);
|
|
l1_pages = num_entries >> 10;
|
|
|
|
for (index = 0 ; index < l1_pages ; index++) {
|
|
int offset;
|
|
unsigned long page;
|
|
unsigned long value;
|
|
|
|
page = efficeon_private.l1_table[index];
|
|
BUG_ON(page);
|
|
|
|
page = get_zeroed_page(GFP_KERNEL);
|
|
if (!page) {
|
|
efficeon_free_gatt_table(agp_bridge);
|
|
return -ENOMEM;
|
|
}
|
|
SetPageReserved(virt_to_page((char *)page));
|
|
|
|
for (offset = 0; offset < PAGE_SIZE; offset += clflush_chunk)
|
|
clflush((char *)page+offset);
|
|
|
|
efficeon_private.l1_table[index] = page;
|
|
|
|
value = virt_to_phys((unsigned long *)page) | pati | present | index;
|
|
|
|
pci_write_config_dword(agp_bridge->dev,
|
|
EFFICEON_ATTPAGE, value);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int efficeon_insert_memory(struct agp_memory * mem, off_t pg_start, int type)
|
|
{
|
|
int i, count = mem->page_count, num_entries;
|
|
unsigned int *page, *last_page;
|
|
const int clflush_chunk = ((cpuid_ebx(1) >> 8) & 0xff) << 3;
|
|
const unsigned long clflush_mask = ~(clflush_chunk-1);
|
|
|
|
printk(KERN_DEBUG PFX "efficeon_insert_memory(%lx, %d)\n", pg_start, count);
|
|
|
|
num_entries = A_SIZE_LVL2(agp_bridge->current_size)->num_entries;
|
|
if ((pg_start + mem->page_count) > num_entries)
|
|
return -EINVAL;
|
|
if (type != 0 || mem->type != 0)
|
|
return -EINVAL;
|
|
|
|
if (!mem->is_flushed) {
|
|
global_cache_flush();
|
|
mem->is_flushed = true;
|
|
}
|
|
|
|
last_page = NULL;
|
|
for (i = 0; i < count; i++) {
|
|
int index = pg_start + i;
|
|
unsigned long insert = efficeon_mask_memory(mem->pages[i]);
|
|
|
|
page = (unsigned int *) efficeon_private.l1_table[index >> 10];
|
|
|
|
if (!page)
|
|
continue;
|
|
|
|
page += (index & 0x3ff);
|
|
*page = insert;
|
|
|
|
/* clflush is slow, so don't clflush until we have to */
|
|
if (last_page &&
|
|
(((unsigned long)page^(unsigned long)last_page) &
|
|
clflush_mask))
|
|
clflush(last_page);
|
|
|
|
last_page = page;
|
|
}
|
|
|
|
if ( last_page )
|
|
clflush(last_page);
|
|
|
|
agp_bridge->driver->tlb_flush(mem);
|
|
return 0;
|
|
}
|
|
|
|
static int efficeon_remove_memory(struct agp_memory * mem, off_t pg_start, int type)
|
|
{
|
|
int i, count = mem->page_count, num_entries;
|
|
|
|
printk(KERN_DEBUG PFX "efficeon_remove_memory(%lx, %d)\n", pg_start, count);
|
|
|
|
num_entries = A_SIZE_LVL2(agp_bridge->current_size)->num_entries;
|
|
|
|
if ((pg_start + mem->page_count) > num_entries)
|
|
return -EINVAL;
|
|
if (type != 0 || mem->type != 0)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
int index = pg_start + i;
|
|
unsigned int *page = (unsigned int *) efficeon_private.l1_table[index >> 10];
|
|
|
|
if (!page)
|
|
continue;
|
|
page += (index & 0x3ff);
|
|
*page = 0;
|
|
}
|
|
agp_bridge->driver->tlb_flush(mem);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct agp_bridge_driver efficeon_driver = {
|
|
.owner = THIS_MODULE,
|
|
.aperture_sizes = efficeon_generic_sizes,
|
|
.size_type = LVL2_APER_SIZE,
|
|
.num_aperture_sizes = 4,
|
|
.configure = efficeon_configure,
|
|
.fetch_size = efficeon_fetch_size,
|
|
.cleanup = efficeon_cleanup,
|
|
.tlb_flush = efficeon_tlbflush,
|
|
.mask_memory = agp_generic_mask_memory,
|
|
.masks = efficeon_generic_masks,
|
|
.agp_enable = agp_generic_enable,
|
|
.cache_flush = global_cache_flush,
|
|
|
|
// Efficeon-specific GATT table setup / populate / teardown
|
|
.create_gatt_table = efficeon_create_gatt_table,
|
|
.free_gatt_table = efficeon_free_gatt_table,
|
|
.insert_memory = efficeon_insert_memory,
|
|
.remove_memory = efficeon_remove_memory,
|
|
.cant_use_aperture = false, // true might be faster?
|
|
|
|
// Generic
|
|
.alloc_by_type = agp_generic_alloc_by_type,
|
|
.free_by_type = agp_generic_free_by_type,
|
|
.agp_alloc_page = agp_generic_alloc_page,
|
|
.agp_alloc_pages = agp_generic_alloc_pages,
|
|
.agp_destroy_page = agp_generic_destroy_page,
|
|
.agp_destroy_pages = agp_generic_destroy_pages,
|
|
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
|
|
};
|
|
|
|
static int agp_efficeon_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct agp_bridge_data *bridge;
|
|
u8 cap_ptr;
|
|
struct resource *r;
|
|
|
|
cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
|
|
if (!cap_ptr)
|
|
return -ENODEV;
|
|
|
|
/* Probe for Efficeon controller */
|
|
if (pdev->device != PCI_DEVICE_ID_EFFICEON) {
|
|
printk(KERN_ERR PFX "Unsupported Efficeon chipset (device id: %04x)\n",
|
|
pdev->device);
|
|
return -ENODEV;
|
|
}
|
|
|
|
printk(KERN_INFO PFX "Detected Transmeta Efficeon TM8000 series chipset\n");
|
|
|
|
bridge = agp_alloc_bridge();
|
|
if (!bridge)
|
|
return -ENOMEM;
|
|
|
|
bridge->driver = &efficeon_driver;
|
|
bridge->dev = pdev;
|
|
bridge->capndx = cap_ptr;
|
|
|
|
/*
|
|
* If the device has not been properly setup, the following will catch
|
|
* the problem and should stop the system from crashing.
|
|
* 20030610 - hamish@zot.org
|
|
*/
|
|
if (pci_enable_device(pdev)) {
|
|
printk(KERN_ERR PFX "Unable to Enable PCI device\n");
|
|
agp_put_bridge(bridge);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* The following fixes the case where the BIOS has "forgotten" to
|
|
* provide an address range for the GART.
|
|
* 20030610 - hamish@zot.org
|
|
*/
|
|
r = &pdev->resource[0];
|
|
if (!r->start && r->end) {
|
|
if (pci_assign_resource(pdev, 0)) {
|
|
printk(KERN_ERR PFX "could not assign resource 0\n");
|
|
agp_put_bridge(bridge);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
/* Fill in the mode register */
|
|
if (cap_ptr) {
|
|
pci_read_config_dword(pdev,
|
|
bridge->capndx+PCI_AGP_STATUS,
|
|
&bridge->mode);
|
|
}
|
|
|
|
pci_set_drvdata(pdev, bridge);
|
|
return agp_add_bridge(bridge);
|
|
}
|
|
|
|
static void agp_efficeon_remove(struct pci_dev *pdev)
|
|
{
|
|
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
|
|
|
|
agp_remove_bridge(bridge);
|
|
agp_put_bridge(bridge);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int agp_efficeon_suspend(struct pci_dev *dev, pm_message_t state)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int agp_efficeon_resume(struct pci_dev *pdev)
|
|
{
|
|
printk(KERN_DEBUG PFX "agp_efficeon_resume()\n");
|
|
return efficeon_configure();
|
|
}
|
|
#endif
|
|
|
|
static struct pci_device_id agp_efficeon_pci_table[] = {
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_TRANSMETA,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, agp_efficeon_pci_table);
|
|
|
|
static struct pci_driver agp_efficeon_pci_driver = {
|
|
.name = "agpgart-efficeon",
|
|
.id_table = agp_efficeon_pci_table,
|
|
.probe = agp_efficeon_probe,
|
|
.remove = agp_efficeon_remove,
|
|
#ifdef CONFIG_PM
|
|
.suspend = agp_efficeon_suspend,
|
|
.resume = agp_efficeon_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init agp_efficeon_init(void)
|
|
{
|
|
static int agp_initialised=0;
|
|
|
|
if (agp_off)
|
|
return -EINVAL;
|
|
|
|
if (agp_initialised == 1)
|
|
return 0;
|
|
agp_initialised=1;
|
|
|
|
return pci_register_driver(&agp_efficeon_pci_driver);
|
|
}
|
|
|
|
static void __exit agp_efficeon_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&agp_efficeon_pci_driver);
|
|
}
|
|
|
|
module_init(agp_efficeon_init);
|
|
module_exit(agp_efficeon_cleanup);
|
|
|
|
MODULE_AUTHOR("Carlos Puchol <cpglinux@puchol.com>");
|
|
MODULE_LICENSE("GPL and additional rights");
|