mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 06:28:09 +07:00
d2912cb15b
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2387 lines
57 KiB
C
2387 lines
57 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Silicon Image SiI8620 HDMI/MHL bridge driver
|
|
*
|
|
* Copyright (C) 2015, Samsung Electronics Co., Ltd.
|
|
* Andrzej Hajda <a.hajda@samsung.com>
|
|
*/
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <drm/bridge/mhl.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_edid.h>
|
|
#include <drm/drm_encoder.h>
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/extcon.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <media/rc-core.h>
|
|
|
|
#include "sil-sii8620.h"
|
|
|
|
#define SII8620_BURST_BUF_LEN 288
|
|
#define VAL_RX_HDMI_CTRL2_DEFVAL VAL_RX_HDMI_CTRL2_IDLE_CNT(3)
|
|
|
|
#define MHL1_MAX_PCLK 75000
|
|
#define MHL1_MAX_PCLK_PP_MODE 150000
|
|
#define MHL3_MAX_PCLK 200000
|
|
#define MHL3_MAX_PCLK_PP_MODE 300000
|
|
|
|
enum sii8620_mode {
|
|
CM_DISCONNECTED,
|
|
CM_DISCOVERY,
|
|
CM_MHL1,
|
|
CM_MHL3,
|
|
CM_ECBUS_S
|
|
};
|
|
|
|
enum sii8620_sink_type {
|
|
SINK_NONE,
|
|
SINK_HDMI,
|
|
SINK_DVI
|
|
};
|
|
|
|
enum sii8620_mt_state {
|
|
MT_STATE_READY,
|
|
MT_STATE_BUSY,
|
|
MT_STATE_DONE
|
|
};
|
|
|
|
struct sii8620 {
|
|
struct drm_bridge bridge;
|
|
struct device *dev;
|
|
struct rc_dev *rc_dev;
|
|
struct clk *clk_xtal;
|
|
struct gpio_desc *gpio_reset;
|
|
struct gpio_desc *gpio_int;
|
|
struct regulator_bulk_data supplies[2];
|
|
struct mutex lock; /* context lock, protects fields below */
|
|
int error;
|
|
unsigned int use_packed_pixel:1;
|
|
enum sii8620_mode mode;
|
|
enum sii8620_sink_type sink_type;
|
|
u8 cbus_status;
|
|
u8 stat[MHL_DST_SIZE];
|
|
u8 xstat[MHL_XDS_SIZE];
|
|
u8 devcap[MHL_DCAP_SIZE];
|
|
u8 xdevcap[MHL_XDC_SIZE];
|
|
bool feature_complete;
|
|
bool devcap_read;
|
|
bool sink_detected;
|
|
struct edid *edid;
|
|
unsigned int gen2_write_burst:1;
|
|
enum sii8620_mt_state mt_state;
|
|
struct extcon_dev *extcon;
|
|
struct notifier_block extcon_nb;
|
|
struct work_struct extcon_wq;
|
|
int cable_state;
|
|
struct list_head mt_queue;
|
|
struct {
|
|
int r_size;
|
|
int r_count;
|
|
int rx_ack;
|
|
int rx_count;
|
|
u8 rx_buf[32];
|
|
int tx_count;
|
|
u8 tx_buf[32];
|
|
} burst;
|
|
};
|
|
|
|
struct sii8620_mt_msg;
|
|
|
|
typedef void (*sii8620_mt_msg_cb)(struct sii8620 *ctx,
|
|
struct sii8620_mt_msg *msg);
|
|
|
|
typedef void (*sii8620_cb)(struct sii8620 *ctx, int ret);
|
|
|
|
struct sii8620_mt_msg {
|
|
struct list_head node;
|
|
u8 reg[4];
|
|
u8 ret;
|
|
sii8620_mt_msg_cb send;
|
|
sii8620_mt_msg_cb recv;
|
|
sii8620_cb continuation;
|
|
};
|
|
|
|
static const u8 sii8620_i2c_page[] = {
|
|
0x39, /* Main System */
|
|
0x3d, /* TDM and HSIC */
|
|
0x49, /* TMDS Receiver, MHL EDID */
|
|
0x4d, /* eMSC, HDCP, HSIC */
|
|
0x5d, /* MHL Spec */
|
|
0x64, /* MHL CBUS */
|
|
0x59, /* Hardware TPI (Transmitter Programming Interface) */
|
|
0x61, /* eCBUS-S, eCBUS-D */
|
|
};
|
|
|
|
static void sii8620_fetch_edid(struct sii8620 *ctx);
|
|
static void sii8620_set_upstream_edid(struct sii8620 *ctx);
|
|
static void sii8620_enable_hpd(struct sii8620 *ctx);
|
|
static void sii8620_mhl_disconnected(struct sii8620 *ctx);
|
|
static void sii8620_disconnect(struct sii8620 *ctx);
|
|
|
|
static int sii8620_clear_error(struct sii8620 *ctx)
|
|
{
|
|
int ret = ctx->error;
|
|
|
|
ctx->error = 0;
|
|
return ret;
|
|
}
|
|
|
|
static void sii8620_read_buf(struct sii8620 *ctx, u16 addr, u8 *buf, int len)
|
|
{
|
|
struct device *dev = ctx->dev;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
u8 data = addr;
|
|
struct i2c_msg msg[] = {
|
|
{
|
|
.addr = sii8620_i2c_page[addr >> 8],
|
|
.flags = client->flags,
|
|
.len = 1,
|
|
.buf = &data
|
|
},
|
|
{
|
|
.addr = sii8620_i2c_page[addr >> 8],
|
|
.flags = client->flags | I2C_M_RD,
|
|
.len = len,
|
|
.buf = buf
|
|
},
|
|
};
|
|
int ret;
|
|
|
|
if (ctx->error)
|
|
return;
|
|
|
|
ret = i2c_transfer(client->adapter, msg, 2);
|
|
dev_dbg(dev, "read at %04x: %*ph, %d\n", addr, len, buf, ret);
|
|
|
|
if (ret != 2) {
|
|
dev_err(dev, "Read at %#06x of %d bytes failed with code %d.\n",
|
|
addr, len, ret);
|
|
ctx->error = ret < 0 ? ret : -EIO;
|
|
}
|
|
}
|
|
|
|
static u8 sii8620_readb(struct sii8620 *ctx, u16 addr)
|
|
{
|
|
u8 ret;
|
|
|
|
sii8620_read_buf(ctx, addr, &ret, 1);
|
|
return ret;
|
|
}
|
|
|
|
static void sii8620_write_buf(struct sii8620 *ctx, u16 addr, const u8 *buf,
|
|
int len)
|
|
{
|
|
struct device *dev = ctx->dev;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
u8 data[2];
|
|
struct i2c_msg msg = {
|
|
.addr = sii8620_i2c_page[addr >> 8],
|
|
.flags = client->flags,
|
|
.len = len + 1,
|
|
};
|
|
int ret;
|
|
|
|
if (ctx->error)
|
|
return;
|
|
|
|
if (len > 1) {
|
|
msg.buf = kmalloc(len + 1, GFP_KERNEL);
|
|
if (!msg.buf) {
|
|
ctx->error = -ENOMEM;
|
|
return;
|
|
}
|
|
memcpy(msg.buf + 1, buf, len);
|
|
} else {
|
|
msg.buf = data;
|
|
msg.buf[1] = *buf;
|
|
}
|
|
|
|
msg.buf[0] = addr;
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
dev_dbg(dev, "write at %04x: %*ph, %d\n", addr, len, buf, ret);
|
|
|
|
if (ret != 1) {
|
|
dev_err(dev, "Write at %#06x of %*ph failed with code %d.\n",
|
|
addr, len, buf, ret);
|
|
ctx->error = ret ?: -EIO;
|
|
}
|
|
|
|
if (len > 1)
|
|
kfree(msg.buf);
|
|
}
|
|
|
|
#define sii8620_write(ctx, addr, arr...) \
|
|
({\
|
|
u8 d[] = { arr }; \
|
|
sii8620_write_buf(ctx, addr, d, ARRAY_SIZE(d)); \
|
|
})
|
|
|
|
static void __sii8620_write_seq(struct sii8620 *ctx, const u16 *seq, int len)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < len; i += 2)
|
|
sii8620_write(ctx, seq[i], seq[i + 1]);
|
|
}
|
|
|
|
#define sii8620_write_seq(ctx, seq...) \
|
|
({\
|
|
const u16 d[] = { seq }; \
|
|
__sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \
|
|
})
|
|
|
|
#define sii8620_write_seq_static(ctx, seq...) \
|
|
({\
|
|
static const u16 d[] = { seq }; \
|
|
__sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \
|
|
})
|
|
|
|
static void sii8620_setbits(struct sii8620 *ctx, u16 addr, u8 mask, u8 val)
|
|
{
|
|
val = (val & mask) | (sii8620_readb(ctx, addr) & ~mask);
|
|
sii8620_write(ctx, addr, val);
|
|
}
|
|
|
|
static inline bool sii8620_is_mhl3(struct sii8620 *ctx)
|
|
{
|
|
return ctx->mode >= CM_MHL3;
|
|
}
|
|
|
|
static void sii8620_mt_cleanup(struct sii8620 *ctx)
|
|
{
|
|
struct sii8620_mt_msg *msg, *n;
|
|
|
|
list_for_each_entry_safe(msg, n, &ctx->mt_queue, node) {
|
|
list_del(&msg->node);
|
|
kfree(msg);
|
|
}
|
|
ctx->mt_state = MT_STATE_READY;
|
|
}
|
|
|
|
static void sii8620_mt_work(struct sii8620 *ctx)
|
|
{
|
|
struct sii8620_mt_msg *msg;
|
|
|
|
if (ctx->error)
|
|
return;
|
|
if (ctx->mt_state == MT_STATE_BUSY || list_empty(&ctx->mt_queue))
|
|
return;
|
|
|
|
if (ctx->mt_state == MT_STATE_DONE) {
|
|
ctx->mt_state = MT_STATE_READY;
|
|
msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg,
|
|
node);
|
|
list_del(&msg->node);
|
|
if (msg->recv)
|
|
msg->recv(ctx, msg);
|
|
if (msg->continuation)
|
|
msg->continuation(ctx, msg->ret);
|
|
kfree(msg);
|
|
}
|
|
|
|
if (ctx->mt_state != MT_STATE_READY || list_empty(&ctx->mt_queue))
|
|
return;
|
|
|
|
ctx->mt_state = MT_STATE_BUSY;
|
|
msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
|
|
if (msg->send)
|
|
msg->send(ctx, msg);
|
|
}
|
|
|
|
static void sii8620_enable_gen2_write_burst(struct sii8620 *ctx)
|
|
{
|
|
u8 ctrl = BIT_MDT_RCV_CTRL_MDT_RCV_EN;
|
|
|
|
if (ctx->gen2_write_burst)
|
|
return;
|
|
|
|
if (ctx->mode >= CM_MHL1)
|
|
ctrl |= BIT_MDT_RCV_CTRL_MDT_DELAY_RCV_EN;
|
|
|
|
sii8620_write_seq(ctx,
|
|
REG_MDT_RCV_TIMEOUT, 100,
|
|
REG_MDT_RCV_CTRL, ctrl
|
|
);
|
|
ctx->gen2_write_burst = 1;
|
|
}
|
|
|
|
static void sii8620_disable_gen2_write_burst(struct sii8620 *ctx)
|
|
{
|
|
if (!ctx->gen2_write_burst)
|
|
return;
|
|
|
|
sii8620_write_seq_static(ctx,
|
|
REG_MDT_XMIT_CTRL, 0,
|
|
REG_MDT_RCV_CTRL, 0
|
|
);
|
|
ctx->gen2_write_burst = 0;
|
|
}
|
|
|
|
static void sii8620_start_gen2_write_burst(struct sii8620 *ctx)
|
|
{
|
|
sii8620_write_seq_static(ctx,
|
|
REG_MDT_INT_1_MASK, BIT_MDT_RCV_TIMEOUT
|
|
| BIT_MDT_RCV_SM_ABORT_PKT_RCVD | BIT_MDT_RCV_SM_ERROR
|
|
| BIT_MDT_XMIT_TIMEOUT | BIT_MDT_XMIT_SM_ABORT_PKT_RCVD
|
|
| BIT_MDT_XMIT_SM_ERROR,
|
|
REG_MDT_INT_0_MASK, BIT_MDT_XFIFO_EMPTY
|
|
| BIT_MDT_IDLE_AFTER_HAWB_DISABLE
|
|
| BIT_MDT_RFIFO_DATA_RDY
|
|
);
|
|
sii8620_enable_gen2_write_burst(ctx);
|
|
}
|
|
|
|
static void sii8620_mt_msc_cmd_send(struct sii8620 *ctx,
|
|
struct sii8620_mt_msg *msg)
|
|
{
|
|
if (msg->reg[0] == MHL_SET_INT &&
|
|
msg->reg[1] == MHL_INT_REG(RCHANGE) &&
|
|
msg->reg[2] == MHL_INT_RC_FEAT_REQ)
|
|
sii8620_enable_gen2_write_burst(ctx);
|
|
else
|
|
sii8620_disable_gen2_write_burst(ctx);
|
|
|
|
switch (msg->reg[0]) {
|
|
case MHL_WRITE_STAT:
|
|
case MHL_SET_INT:
|
|
sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg + 1, 2);
|
|
sii8620_write(ctx, REG_MSC_COMMAND_START,
|
|
BIT_MSC_COMMAND_START_WRITE_STAT);
|
|
break;
|
|
case MHL_MSC_MSG:
|
|
sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg, 3);
|
|
sii8620_write(ctx, REG_MSC_COMMAND_START,
|
|
BIT_MSC_COMMAND_START_MSC_MSG);
|
|
break;
|
|
case MHL_READ_DEVCAP_REG:
|
|
case MHL_READ_XDEVCAP_REG:
|
|
sii8620_write(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg[1]);
|
|
sii8620_write(ctx, REG_MSC_COMMAND_START,
|
|
BIT_MSC_COMMAND_START_READ_DEVCAP);
|
|
break;
|
|
default:
|
|
dev_err(ctx->dev, "%s: command %#x not supported\n", __func__,
|
|
msg->reg[0]);
|
|
}
|
|
}
|
|
|
|
static struct sii8620_mt_msg *sii8620_mt_msg_new(struct sii8620 *ctx)
|
|
{
|
|
struct sii8620_mt_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
|
|
|
|
if (!msg)
|
|
ctx->error = -ENOMEM;
|
|
else
|
|
list_add_tail(&msg->node, &ctx->mt_queue);
|
|
|
|
return msg;
|
|
}
|
|
|
|
static void sii8620_mt_set_cont(struct sii8620 *ctx, sii8620_cb cont)
|
|
{
|
|
struct sii8620_mt_msg *msg;
|
|
|
|
if (ctx->error)
|
|
return;
|
|
|
|
if (list_empty(&ctx->mt_queue)) {
|
|
ctx->error = -EINVAL;
|
|
return;
|
|
}
|
|
msg = list_last_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
|
|
msg->continuation = cont;
|
|
}
|
|
|
|
static void sii8620_mt_msc_cmd(struct sii8620 *ctx, u8 cmd, u8 arg1, u8 arg2)
|
|
{
|
|
struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
|
|
|
|
if (!msg)
|
|
return;
|
|
|
|
msg->reg[0] = cmd;
|
|
msg->reg[1] = arg1;
|
|
msg->reg[2] = arg2;
|
|
msg->send = sii8620_mt_msc_cmd_send;
|
|
}
|
|
|
|
static void sii8620_mt_write_stat(struct sii8620 *ctx, u8 reg, u8 val)
|
|
{
|
|
sii8620_mt_msc_cmd(ctx, MHL_WRITE_STAT, reg, val);
|
|
}
|
|
|
|
static inline void sii8620_mt_set_int(struct sii8620 *ctx, u8 irq, u8 mask)
|
|
{
|
|
sii8620_mt_msc_cmd(ctx, MHL_SET_INT, irq, mask);
|
|
}
|
|
|
|
static void sii8620_mt_msc_msg(struct sii8620 *ctx, u8 cmd, u8 data)
|
|
{
|
|
sii8620_mt_msc_cmd(ctx, MHL_MSC_MSG, cmd, data);
|
|
}
|
|
|
|
static void sii8620_mt_rap(struct sii8620 *ctx, u8 code)
|
|
{
|
|
sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RAP, code);
|
|
}
|
|
|
|
static void sii8620_mt_rcpk(struct sii8620 *ctx, u8 code)
|
|
{
|
|
sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RCPK, code);
|
|
}
|
|
|
|
static void sii8620_mt_rcpe(struct sii8620 *ctx, u8 code)
|
|
{
|
|
sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RCPE, code);
|
|
}
|
|
|
|
static void sii8620_mt_read_devcap_send(struct sii8620 *ctx,
|
|
struct sii8620_mt_msg *msg)
|
|
{
|
|
u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP
|
|
| BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
|
|
| BIT_EDID_CTRL_EDID_MODE_EN;
|
|
|
|
if (msg->reg[0] == MHL_READ_XDEVCAP)
|
|
ctrl |= BIT_EDID_CTRL_XDEVCAP_EN;
|
|
|
|
sii8620_write_seq(ctx,
|
|
REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE,
|
|
REG_EDID_CTRL, ctrl,
|
|
REG_TPI_CBUS_START, BIT_TPI_CBUS_START_GET_DEVCAP_START
|
|
);
|
|
}
|
|
|
|
/* copy src to dst and set changed bits in src */
|
|
static void sii8620_update_array(u8 *dst, u8 *src, int count)
|
|
{
|
|
while (--count >= 0) {
|
|
*src ^= *dst;
|
|
*dst++ ^= *src++;
|
|
}
|
|
}
|
|
|
|
static void sii8620_identify_sink(struct sii8620 *ctx)
|
|
{
|
|
static const char * const sink_str[] = {
|
|
[SINK_NONE] = "NONE",
|
|
[SINK_HDMI] = "HDMI",
|
|
[SINK_DVI] = "DVI"
|
|
};
|
|
|
|
char sink_name[20];
|
|
struct device *dev = ctx->dev;
|
|
|
|
if (!ctx->sink_detected || !ctx->devcap_read)
|
|
return;
|
|
|
|
sii8620_fetch_edid(ctx);
|
|
if (!ctx->edid) {
|
|
dev_err(ctx->dev, "Cannot fetch EDID\n");
|
|
sii8620_mhl_disconnected(ctx);
|
|
return;
|
|
}
|
|
sii8620_set_upstream_edid(ctx);
|
|
|
|
if (drm_detect_hdmi_monitor(ctx->edid))
|
|
ctx->sink_type = SINK_HDMI;
|
|
else
|
|
ctx->sink_type = SINK_DVI;
|
|
|
|
drm_edid_get_monitor_name(ctx->edid, sink_name, ARRAY_SIZE(sink_name));
|
|
|
|
dev_info(dev, "detected sink(type: %s): %s\n",
|
|
sink_str[ctx->sink_type], sink_name);
|
|
}
|
|
|
|
static void sii8620_mr_devcap(struct sii8620 *ctx)
|
|
{
|
|
u8 dcap[MHL_DCAP_SIZE];
|
|
struct device *dev = ctx->dev;
|
|
|
|
sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, dcap, MHL_DCAP_SIZE);
|
|
if (ctx->error < 0)
|
|
return;
|
|
|
|
dev_info(dev, "detected dongle MHL %d.%d, ChipID %02x%02x:%02x%02x\n",
|
|
dcap[MHL_DCAP_MHL_VERSION] / 16,
|
|
dcap[MHL_DCAP_MHL_VERSION] % 16,
|
|
dcap[MHL_DCAP_ADOPTER_ID_H], dcap[MHL_DCAP_ADOPTER_ID_L],
|
|
dcap[MHL_DCAP_DEVICE_ID_H], dcap[MHL_DCAP_DEVICE_ID_L]);
|
|
sii8620_update_array(ctx->devcap, dcap, MHL_DCAP_SIZE);
|
|
ctx->devcap_read = true;
|
|
sii8620_identify_sink(ctx);
|
|
}
|
|
|
|
static void sii8620_mr_xdevcap(struct sii8620 *ctx)
|
|
{
|
|
sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, ctx->xdevcap,
|
|
MHL_XDC_SIZE);
|
|
}
|
|
|
|
static void sii8620_mt_read_devcap_recv(struct sii8620 *ctx,
|
|
struct sii8620_mt_msg *msg)
|
|
{
|
|
u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP
|
|
| BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
|
|
| BIT_EDID_CTRL_EDID_MODE_EN;
|
|
|
|
if (msg->reg[0] == MHL_READ_XDEVCAP)
|
|
ctrl |= BIT_EDID_CTRL_XDEVCAP_EN;
|
|
|
|
sii8620_write_seq(ctx,
|
|
REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE | BIT_INTR9_EDID_DONE
|
|
| BIT_INTR9_EDID_ERROR,
|
|
REG_EDID_CTRL, ctrl,
|
|
REG_EDID_FIFO_ADDR, 0
|
|
);
|
|
|
|
if (msg->reg[0] == MHL_READ_XDEVCAP)
|
|
sii8620_mr_xdevcap(ctx);
|
|
else
|
|
sii8620_mr_devcap(ctx);
|
|
}
|
|
|
|
static void sii8620_mt_read_devcap(struct sii8620 *ctx, bool xdevcap)
|
|
{
|
|
struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
|
|
|
|
if (!msg)
|
|
return;
|
|
|
|
msg->reg[0] = xdevcap ? MHL_READ_XDEVCAP : MHL_READ_DEVCAP;
|
|
msg->send = sii8620_mt_read_devcap_send;
|
|
msg->recv = sii8620_mt_read_devcap_recv;
|
|
}
|
|
|
|
static void sii8620_mt_read_devcap_reg_recv(struct sii8620 *ctx,
|
|
struct sii8620_mt_msg *msg)
|
|
{
|
|
u8 reg = msg->reg[1] & 0x7f;
|
|
|
|
if (msg->reg[1] & 0x80)
|
|
ctx->xdevcap[reg] = msg->ret;
|
|
else
|
|
ctx->devcap[reg] = msg->ret;
|
|
}
|
|
|
|
static void sii8620_mt_read_devcap_reg(struct sii8620 *ctx, u8 reg)
|
|
{
|
|
struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
|
|
|
|
if (!msg)
|
|
return;
|
|
|
|
msg->reg[0] = (reg & 0x80) ? MHL_READ_XDEVCAP_REG : MHL_READ_DEVCAP_REG;
|
|
msg->reg[1] = reg;
|
|
msg->send = sii8620_mt_msc_cmd_send;
|
|
msg->recv = sii8620_mt_read_devcap_reg_recv;
|
|
}
|
|
|
|
static inline void sii8620_mt_read_xdevcap_reg(struct sii8620 *ctx, u8 reg)
|
|
{
|
|
sii8620_mt_read_devcap_reg(ctx, reg | 0x80);
|
|
}
|
|
|
|
static void *sii8620_burst_get_tx_buf(struct sii8620 *ctx, int len)
|
|
{
|
|
u8 *buf = &ctx->burst.tx_buf[ctx->burst.tx_count];
|
|
int size = len + 2;
|
|
|
|
if (ctx->burst.tx_count + size > ARRAY_SIZE(ctx->burst.tx_buf)) {
|
|
dev_err(ctx->dev, "TX-BLK buffer exhausted\n");
|
|
ctx->error = -EINVAL;
|
|
return NULL;
|
|
}
|
|
|
|
ctx->burst.tx_count += size;
|
|
buf[1] = len;
|
|
|
|
return buf + 2;
|
|
}
|
|
|
|
static u8 *sii8620_burst_get_rx_buf(struct sii8620 *ctx, int len)
|
|
{
|
|
u8 *buf = &ctx->burst.rx_buf[ctx->burst.rx_count];
|
|
int size = len + 1;
|
|
|
|
if (ctx->burst.tx_count + size > ARRAY_SIZE(ctx->burst.tx_buf)) {
|
|
dev_err(ctx->dev, "RX-BLK buffer exhausted\n");
|
|
ctx->error = -EINVAL;
|
|
return NULL;
|
|
}
|
|
|
|
ctx->burst.rx_count += size;
|
|
buf[0] = len;
|
|
|
|
return buf + 1;
|
|
}
|
|
|
|
static void sii8620_burst_send(struct sii8620 *ctx)
|
|
{
|
|
int tx_left = ctx->burst.tx_count;
|
|
u8 *d = ctx->burst.tx_buf;
|
|
|
|
while (tx_left > 0) {
|
|
int len = d[1] + 2;
|
|
|
|
if (ctx->burst.r_count + len > ctx->burst.r_size)
|
|
break;
|
|
d[0] = min(ctx->burst.rx_ack, 255);
|
|
ctx->burst.rx_ack -= d[0];
|
|
sii8620_write_buf(ctx, REG_EMSC_XMIT_WRITE_PORT, d, len);
|
|
ctx->burst.r_count += len;
|
|
tx_left -= len;
|
|
d += len;
|
|
}
|
|
|
|
ctx->burst.tx_count = tx_left;
|
|
|
|
while (ctx->burst.rx_ack > 0) {
|
|
u8 b[2] = { min(ctx->burst.rx_ack, 255), 0 };
|
|
|
|
if (ctx->burst.r_count + 2 > ctx->burst.r_size)
|
|
break;
|
|
ctx->burst.rx_ack -= b[0];
|
|
sii8620_write_buf(ctx, REG_EMSC_XMIT_WRITE_PORT, b, 2);
|
|
ctx->burst.r_count += 2;
|
|
}
|
|
}
|
|
|
|
static void sii8620_burst_receive(struct sii8620 *ctx)
|
|
{
|
|
u8 buf[3], *d;
|
|
int count;
|
|
|
|
sii8620_read_buf(ctx, REG_EMSCRFIFOBCNTL, buf, 2);
|
|
count = get_unaligned_le16(buf);
|
|
while (count > 0) {
|
|
int len = min(count, 3);
|
|
|
|
sii8620_read_buf(ctx, REG_EMSC_RCV_READ_PORT, buf, len);
|
|
count -= len;
|
|
ctx->burst.rx_ack += len - 1;
|
|
ctx->burst.r_count -= buf[1];
|
|
if (ctx->burst.r_count < 0)
|
|
ctx->burst.r_count = 0;
|
|
|
|
if (len < 3 || !buf[2])
|
|
continue;
|
|
|
|
len = buf[2];
|
|
d = sii8620_burst_get_rx_buf(ctx, len);
|
|
if (!d)
|
|
continue;
|
|
sii8620_read_buf(ctx, REG_EMSC_RCV_READ_PORT, d, len);
|
|
count -= len;
|
|
ctx->burst.rx_ack += len;
|
|
}
|
|
}
|
|
|
|
static void sii8620_burst_tx_rbuf_info(struct sii8620 *ctx, int size)
|
|
{
|
|
struct mhl_burst_blk_rcv_buffer_info *d =
|
|
sii8620_burst_get_tx_buf(ctx, sizeof(*d));
|
|
if (!d)
|
|
return;
|
|
|
|
d->id = cpu_to_be16(MHL_BURST_ID_BLK_RCV_BUFFER_INFO);
|
|
d->size = cpu_to_le16(size);
|
|
}
|
|
|
|
static u8 sii8620_checksum(void *ptr, int size)
|
|
{
|
|
u8 *d = ptr, sum = 0;
|
|
|
|
while (size--)
|
|
sum += *d++;
|
|
|
|
return sum;
|
|
}
|
|
|
|
static void sii8620_mhl_burst_hdr_set(struct mhl3_burst_header *h,
|
|
enum mhl_burst_id id)
|
|
{
|
|
h->id = cpu_to_be16(id);
|
|
h->total_entries = 1;
|
|
h->sequence_index = 1;
|
|
}
|
|
|
|
static void sii8620_burst_tx_bits_per_pixel_fmt(struct sii8620 *ctx, u8 fmt)
|
|
{
|
|
struct mhl_burst_bits_per_pixel_fmt *d;
|
|
const int size = sizeof(*d) + sizeof(d->desc[0]);
|
|
|
|
d = sii8620_burst_get_tx_buf(ctx, size);
|
|
if (!d)
|
|
return;
|
|
|
|
sii8620_mhl_burst_hdr_set(&d->hdr, MHL_BURST_ID_BITS_PER_PIXEL_FMT);
|
|
d->num_entries = 1;
|
|
d->desc[0].stream_id = 0;
|
|
d->desc[0].pixel_format = fmt;
|
|
d->hdr.checksum -= sii8620_checksum(d, size);
|
|
}
|
|
|
|
static void sii8620_burst_rx_all(struct sii8620 *ctx)
|
|
{
|
|
u8 *d = ctx->burst.rx_buf;
|
|
int count = ctx->burst.rx_count;
|
|
|
|
while (count-- > 0) {
|
|
int len = *d++;
|
|
int id = get_unaligned_be16(&d[0]);
|
|
|
|
switch (id) {
|
|
case MHL_BURST_ID_BLK_RCV_BUFFER_INFO:
|
|
ctx->burst.r_size = get_unaligned_le16(&d[2]);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
count -= len;
|
|
d += len;
|
|
}
|
|
ctx->burst.rx_count = 0;
|
|
}
|
|
|
|
static void sii8620_fetch_edid(struct sii8620 *ctx)
|
|
{
|
|
u8 lm_ddc, ddc_cmd, int3, cbus;
|
|
unsigned long timeout;
|
|
int fetched, i;
|
|
int edid_len = EDID_LENGTH;
|
|
u8 *edid;
|
|
|
|
sii8620_readb(ctx, REG_CBUS_STATUS);
|
|
lm_ddc = sii8620_readb(ctx, REG_LM_DDC);
|
|
ddc_cmd = sii8620_readb(ctx, REG_DDC_CMD);
|
|
|
|
sii8620_write_seq(ctx,
|
|
REG_INTR9_MASK, 0,
|
|
REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO,
|
|
REG_HDCP2X_POLL_CS, 0x71,
|
|
REG_HDCP2X_CTRL_0, BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX,
|
|
REG_LM_DDC, lm_ddc | BIT_LM_DDC_SW_TPI_EN_DISABLED,
|
|
);
|
|
|
|
for (i = 0; i < 256; ++i) {
|
|
u8 ddc_stat = sii8620_readb(ctx, REG_DDC_STATUS);
|
|
|
|
if (!(ddc_stat & BIT_DDC_STATUS_DDC_I2C_IN_PROG))
|
|
break;
|
|
sii8620_write(ctx, REG_DDC_STATUS,
|
|
BIT_DDC_STATUS_DDC_FIFO_EMPTY);
|
|
}
|
|
|
|
sii8620_write(ctx, REG_DDC_ADDR, 0x50 << 1);
|
|
|
|
edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
|
|
if (!edid) {
|
|
ctx->error = -ENOMEM;
|
|
return;
|
|
}
|
|
|
|
#define FETCH_SIZE 16
|
|
for (fetched = 0; fetched < edid_len; fetched += FETCH_SIZE) {
|
|
sii8620_readb(ctx, REG_DDC_STATUS);
|
|
sii8620_write_seq(ctx,
|
|
REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_ABORT,
|
|
REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO,
|
|
REG_DDC_STATUS, BIT_DDC_STATUS_DDC_FIFO_EMPTY
|
|
);
|
|
sii8620_write_seq(ctx,
|
|
REG_DDC_SEGM, fetched >> 8,
|
|
REG_DDC_OFFSET, fetched & 0xff,
|
|
REG_DDC_DIN_CNT1, FETCH_SIZE,
|
|
REG_DDC_DIN_CNT2, 0,
|
|
REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_ENH_DDC_READ_NO_ACK
|
|
);
|
|
|
|
int3 = 0;
|
|
timeout = jiffies + msecs_to_jiffies(200);
|
|
for (;;) {
|
|
cbus = sii8620_readb(ctx, REG_CBUS_STATUS);
|
|
if (~cbus & BIT_CBUS_STATUS_CBUS_CONNECTED) {
|
|
kfree(edid);
|
|
edid = NULL;
|
|
goto end;
|
|
}
|
|
if (int3 & BIT_DDC_CMD_DONE) {
|
|
if (sii8620_readb(ctx, REG_DDC_DOUT_CNT)
|
|
>= FETCH_SIZE)
|
|
break;
|
|
} else {
|
|
int3 = sii8620_readb(ctx, REG_INTR3);
|
|
}
|
|
if (time_is_before_jiffies(timeout)) {
|
|
ctx->error = -ETIMEDOUT;
|
|
dev_err(ctx->dev, "timeout during EDID read\n");
|
|
kfree(edid);
|
|
edid = NULL;
|
|
goto end;
|
|
}
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
sii8620_read_buf(ctx, REG_DDC_DATA, edid + fetched, FETCH_SIZE);
|
|
if (fetched + FETCH_SIZE == EDID_LENGTH) {
|
|
u8 ext = ((struct edid *)edid)->extensions;
|
|
|
|
if (ext) {
|
|
u8 *new_edid;
|
|
|
|
edid_len += ext * EDID_LENGTH;
|
|
new_edid = krealloc(edid, edid_len, GFP_KERNEL);
|
|
if (!new_edid) {
|
|
kfree(edid);
|
|
ctx->error = -ENOMEM;
|
|
return;
|
|
}
|
|
edid = new_edid;
|
|
}
|
|
}
|
|
}
|
|
|
|
sii8620_write_seq(ctx,
|
|
REG_INTR3_MASK, BIT_DDC_CMD_DONE,
|
|
REG_LM_DDC, lm_ddc
|
|
);
|
|
|
|
end:
|
|
kfree(ctx->edid);
|
|
ctx->edid = (struct edid *)edid;
|
|
}
|
|
|
|
static void sii8620_set_upstream_edid(struct sii8620 *ctx)
|
|
{
|
|
sii8620_setbits(ctx, REG_DPD, BIT_DPD_PDNRX12 | BIT_DPD_PDIDCK_N
|
|
| BIT_DPD_PD_MHL_CLK_N, 0xff);
|
|
|
|
sii8620_write_seq_static(ctx,
|
|
REG_RX_HDMI_CTRL3, 0x00,
|
|
REG_PKT_FILTER_0, 0xFF,
|
|
REG_PKT_FILTER_1, 0xFF,
|
|
REG_ALICE0_BW_I2C, 0x06
|
|
);
|
|
|
|
sii8620_setbits(ctx, REG_RX_HDMI_CLR_BUFFER,
|
|
BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN, 0xff);
|
|
|
|
sii8620_write_seq_static(ctx,
|
|
REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
|
|
| BIT_EDID_CTRL_EDID_MODE_EN,
|
|
REG_EDID_FIFO_ADDR, 0,
|
|
);
|
|
|
|
sii8620_write_buf(ctx, REG_EDID_FIFO_WR_DATA, (u8 *)ctx->edid,
|
|
(ctx->edid->extensions + 1) * EDID_LENGTH);
|
|
|
|
sii8620_write_seq_static(ctx,
|
|
REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID
|
|
| BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
|
|
| BIT_EDID_CTRL_EDID_MODE_EN,
|
|
REG_INTR5_MASK, BIT_INTR_SCDT_CHANGE,
|
|
REG_INTR9_MASK, 0
|
|
);
|
|
}
|
|
|
|
static void sii8620_xtal_set_rate(struct sii8620 *ctx)
|
|
{
|
|
static const struct {
|
|
unsigned int rate;
|
|
u8 div;
|
|
u8 tp1;
|
|
} rates[] = {
|
|
{ 19200, 0x04, 0x53 },
|
|
{ 20000, 0x04, 0x62 },
|
|
{ 24000, 0x05, 0x75 },
|
|
{ 30000, 0x06, 0x92 },
|
|
{ 38400, 0x0c, 0xbc },
|
|
};
|
|
unsigned long rate = clk_get_rate(ctx->clk_xtal) / 1000;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rates) - 1; ++i)
|
|
if (rate <= rates[i].rate)
|
|
break;
|
|
|
|
if (rate != rates[i].rate)
|
|
dev_err(ctx->dev, "xtal clock rate(%lukHz) not supported, setting MHL for %ukHz.\n",
|
|
rate, rates[i].rate);
|
|
|
|
sii8620_write(ctx, REG_DIV_CTL_MAIN, rates[i].div);
|
|
sii8620_write(ctx, REG_HDCP2X_TP1, rates[i].tp1);
|
|
}
|
|
|
|
static int sii8620_hw_on(struct sii8620 *ctx)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usleep_range(10000, 20000);
|
|
ret = clk_prepare_enable(ctx->clk_xtal);
|
|
if (ret)
|
|
return ret;
|
|
|
|
msleep(100);
|
|
gpiod_set_value(ctx->gpio_reset, 0);
|
|
msleep(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sii8620_hw_off(struct sii8620 *ctx)
|
|
{
|
|
clk_disable_unprepare(ctx->clk_xtal);
|
|
gpiod_set_value(ctx->gpio_reset, 1);
|
|
return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
}
|
|
|
|
static void sii8620_cbus_reset(struct sii8620 *ctx)
|
|
{
|
|
sii8620_write(ctx, REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST
|
|
| BIT_PWD_SRST_CBUS_RST_SW_EN);
|
|
usleep_range(10000, 20000);
|
|
sii8620_write(ctx, REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST_SW_EN);
|
|
}
|
|
|
|
static void sii8620_set_auto_zone(struct sii8620 *ctx)
|
|
{
|
|
if (ctx->mode != CM_MHL1) {
|
|
sii8620_write_seq_static(ctx,
|
|
REG_TX_ZONE_CTL1, 0x0,
|
|
REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
|
|
| BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
|
|
| BIT_MHL_PLL_CTL0_ZONE_MASK_OE
|
|
);
|
|
} else {
|
|
sii8620_write_seq_static(ctx,
|
|
REG_TX_ZONE_CTL1, VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE,
|
|
REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
|
|
| BIT_MHL_PLL_CTL0_ZONE_MASK_OE
|
|
);
|
|
}
|
|
}
|
|
|
|
static void sii8620_stop_video(struct sii8620 *ctx)
|
|
{
|
|
u8 uninitialized_var(val);
|
|
|
|
sii8620_write_seq_static(ctx,
|
|
REG_TPI_INTR_EN, 0,
|
|
REG_HDCP2X_INTR0_MASK, 0,
|
|
REG_TPI_COPP_DATA2, 0,
|
|
REG_TPI_INTR_ST0, ~0,
|
|
);
|
|
|
|
switch (ctx->sink_type) {
|
|
case SINK_DVI:
|
|
val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN
|
|
| BIT_TPI_SC_TPI_AV_MUTE;
|
|
break;
|
|
case SINK_HDMI:
|
|
default:
|
|
val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN
|
|
| BIT_TPI_SC_TPI_AV_MUTE
|
|
| BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI;
|
|
break;
|
|
}
|
|
|
|
sii8620_write(ctx, REG_TPI_SC, val);
|
|
}
|
|
|
|
static void sii8620_set_format(struct sii8620 *ctx)
|
|
{
|
|
u8 out_fmt;
|
|
|
|
if (sii8620_is_mhl3(ctx)) {
|
|
sii8620_setbits(ctx, REG_M3_P0CTRL,
|
|
BIT_M3_P0CTRL_MHL3_P0_PIXEL_MODE_PACKED,
|
|
ctx->use_packed_pixel ? ~0 : 0);
|
|
} else {
|
|
if (ctx->use_packed_pixel) {
|
|
sii8620_write_seq_static(ctx,
|
|
REG_VID_MODE, BIT_VID_MODE_M1080P,
|
|
REG_MHL_TOP_CTL, BIT_MHL_TOP_CTL_MHL_PP_SEL | 1,
|
|
REG_MHLTX_CTL6, 0x60
|
|
);
|
|
} else {
|
|
sii8620_write_seq_static(ctx,
|
|
REG_VID_MODE, 0,
|
|
REG_MHL_TOP_CTL, 1,
|
|
REG_MHLTX_CTL6, 0xa0
|
|
);
|
|
}
|
|
}
|
|
|
|
if (ctx->use_packed_pixel)
|
|
out_fmt = VAL_TPI_FORMAT(YCBCR422, FULL);
|
|
else
|
|
out_fmt = VAL_TPI_FORMAT(RGB, FULL);
|
|
|
|
sii8620_write_seq(ctx,
|
|
REG_TPI_INPUT, VAL_TPI_FORMAT(RGB, FULL),
|
|
REG_TPI_OUTPUT, out_fmt,
|
|
);
|
|
}
|
|
|
|
static int mhl3_infoframe_init(struct mhl3_infoframe *frame)
|
|
{
|
|
memset(frame, 0, sizeof(*frame));
|
|
|
|
frame->version = 3;
|
|
frame->hev_format = -1;
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t mhl3_infoframe_pack(struct mhl3_infoframe *frame,
|
|
void *buffer, size_t size)
|
|
{
|
|
const int frm_len = HDMI_INFOFRAME_HEADER_SIZE + MHL3_INFOFRAME_SIZE;
|
|
u8 *ptr = buffer;
|
|
|
|
if (size < frm_len)
|
|
return -ENOSPC;
|
|
|
|
memset(buffer, 0, size);
|
|
ptr[0] = HDMI_INFOFRAME_TYPE_VENDOR;
|
|
ptr[1] = frame->version;
|
|
ptr[2] = MHL3_INFOFRAME_SIZE;
|
|
ptr[4] = MHL3_IEEE_OUI & 0xff;
|
|
ptr[5] = (MHL3_IEEE_OUI >> 8) & 0xff;
|
|
ptr[6] = (MHL3_IEEE_OUI >> 16) & 0xff;
|
|
ptr[7] = frame->video_format & 0x3;
|
|
ptr[7] |= (frame->format_type & 0x7) << 2;
|
|
ptr[7] |= frame->sep_audio ? BIT(5) : 0;
|
|
if (frame->hev_format >= 0) {
|
|
ptr[9] = 1;
|
|
ptr[10] = (frame->hev_format >> 8) & 0xff;
|
|
ptr[11] = frame->hev_format & 0xff;
|
|
}
|
|
if (frame->av_delay) {
|
|
bool sign = frame->av_delay < 0;
|
|
int delay = sign ? -frame->av_delay : frame->av_delay;
|
|
|
|
ptr[12] = (delay >> 16) & 0xf;
|
|
if (sign)
|
|
ptr[12] |= BIT(4);
|
|
ptr[13] = (delay >> 8) & 0xff;
|
|
ptr[14] = delay & 0xff;
|
|
}
|
|
ptr[3] -= sii8620_checksum(buffer, frm_len);
|
|
return frm_len;
|
|
}
|
|
|
|
static void sii8620_set_infoframes(struct sii8620 *ctx,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct mhl3_infoframe mhl_frm;
|
|
union hdmi_infoframe frm;
|
|
u8 buf[31];
|
|
int ret;
|
|
|
|
ret = drm_hdmi_avi_infoframe_from_display_mode(&frm.avi,
|
|
NULL, mode);
|
|
if (ctx->use_packed_pixel)
|
|
frm.avi.colorspace = HDMI_COLORSPACE_YUV422;
|
|
|
|
if (!ret)
|
|
ret = hdmi_avi_infoframe_pack(&frm.avi, buf, ARRAY_SIZE(buf));
|
|
if (ret > 0)
|
|
sii8620_write_buf(ctx, REG_TPI_AVI_CHSUM, buf + 3, ret - 3);
|
|
|
|
if (!sii8620_is_mhl3(ctx) || !ctx->use_packed_pixel) {
|
|
sii8620_write(ctx, REG_TPI_SC,
|
|
BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI);
|
|
sii8620_write(ctx, REG_PKT_FILTER_0,
|
|
BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT |
|
|
BIT_PKT_FILTER_0_DROP_MPEG_PKT |
|
|
BIT_PKT_FILTER_0_DROP_GCP_PKT,
|
|
BIT_PKT_FILTER_1_DROP_GEN_PKT);
|
|
return;
|
|
}
|
|
|
|
sii8620_write(ctx, REG_PKT_FILTER_0,
|
|
BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT |
|
|
BIT_PKT_FILTER_0_DROP_MPEG_PKT |
|
|
BIT_PKT_FILTER_0_DROP_AVI_PKT |
|
|
BIT_PKT_FILTER_0_DROP_GCP_PKT,
|
|
BIT_PKT_FILTER_1_VSI_OVERRIDE_DIS |
|
|
BIT_PKT_FILTER_1_DROP_GEN_PKT |
|
|
BIT_PKT_FILTER_1_DROP_VSIF_PKT);
|
|
|
|
sii8620_write(ctx, REG_TPI_INFO_FSEL, BIT_TPI_INFO_FSEL_EN
|
|
| BIT_TPI_INFO_FSEL_RPT | VAL_TPI_INFO_FSEL_VSI);
|
|
ret = mhl3_infoframe_init(&mhl_frm);
|
|
if (!ret)
|
|
ret = mhl3_infoframe_pack(&mhl_frm, buf, ARRAY_SIZE(buf));
|
|
sii8620_write_buf(ctx, REG_TPI_INFO_B0, buf, ret);
|
|
}
|
|
|
|
static void sii8620_start_video(struct sii8620 *ctx)
|
|
{
|
|
struct drm_display_mode *mode =
|
|
&ctx->bridge.encoder->crtc->state->adjusted_mode;
|
|
|
|
if (!sii8620_is_mhl3(ctx))
|
|
sii8620_stop_video(ctx);
|
|
|
|
if (ctx->sink_type == SINK_DVI && !sii8620_is_mhl3(ctx)) {
|
|
sii8620_write(ctx, REG_RX_HDMI_CTRL2,
|
|
VAL_RX_HDMI_CTRL2_DEFVAL);
|
|
sii8620_write(ctx, REG_TPI_SC, 0);
|
|
return;
|
|
}
|
|
|
|
sii8620_write_seq_static(ctx,
|
|
REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL
|
|
| BIT_RX_HDMI_CTRL2_USE_AV_MUTE,
|
|
REG_VID_OVRRD, BIT_VID_OVRRD_PP_AUTO_DISABLE
|
|
| BIT_VID_OVRRD_M1080P_OVRRD);
|
|
sii8620_set_format(ctx);
|
|
|
|
if (!sii8620_is_mhl3(ctx)) {
|
|
u8 link_mode = MHL_DST_LM_PATH_ENABLED;
|
|
|
|
if (ctx->use_packed_pixel)
|
|
link_mode |= MHL_DST_LM_CLK_MODE_PACKED_PIXEL;
|
|
else
|
|
link_mode |= MHL_DST_LM_CLK_MODE_NORMAL;
|
|
|
|
sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), link_mode);
|
|
sii8620_set_auto_zone(ctx);
|
|
} else {
|
|
static const struct {
|
|
int max_clk;
|
|
u8 zone;
|
|
u8 link_rate;
|
|
u8 rrp_decode;
|
|
} clk_spec[] = {
|
|
{ 150000, VAL_TX_ZONE_CTL3_TX_ZONE_1_5GBPS,
|
|
MHL_XDS_LINK_RATE_1_5_GBPS, 0x38 },
|
|
{ 300000, VAL_TX_ZONE_CTL3_TX_ZONE_3GBPS,
|
|
MHL_XDS_LINK_RATE_3_0_GBPS, 0x40 },
|
|
{ 600000, VAL_TX_ZONE_CTL3_TX_ZONE_6GBPS,
|
|
MHL_XDS_LINK_RATE_6_0_GBPS, 0x40 },
|
|
};
|
|
u8 p0_ctrl = BIT_M3_P0CTRL_MHL3_P0_PORT_EN;
|
|
int clk = mode->clock * (ctx->use_packed_pixel ? 2 : 3);
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(clk_spec) - 1; ++i)
|
|
if (clk < clk_spec[i].max_clk)
|
|
break;
|
|
|
|
if (100 * clk >= 98 * clk_spec[i].max_clk)
|
|
p0_ctrl |= BIT_M3_P0CTRL_MHL3_P0_UNLIMIT_EN;
|
|
|
|
sii8620_burst_tx_bits_per_pixel_fmt(ctx, ctx->use_packed_pixel);
|
|
sii8620_burst_send(ctx);
|
|
sii8620_write_seq(ctx,
|
|
REG_MHL_DP_CTL0, 0xf0,
|
|
REG_MHL3_TX_ZONE_CTL, clk_spec[i].zone);
|
|
sii8620_setbits(ctx, REG_M3_P0CTRL,
|
|
BIT_M3_P0CTRL_MHL3_P0_PORT_EN
|
|
| BIT_M3_P0CTRL_MHL3_P0_UNLIMIT_EN, p0_ctrl);
|
|
sii8620_setbits(ctx, REG_M3_POSTM, MSK_M3_POSTM_RRP_DECODE,
|
|
clk_spec[i].rrp_decode);
|
|
sii8620_write_seq_static(ctx,
|
|
REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE
|
|
| BIT_M3_CTRL_H2M_SWRST,
|
|
REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE
|
|
);
|
|
sii8620_mt_write_stat(ctx, MHL_XDS_REG(AVLINK_MODE_CONTROL),
|
|
clk_spec[i].link_rate);
|
|
}
|
|
|
|
sii8620_set_infoframes(ctx, mode);
|
|
}
|
|
|
|
static void sii8620_disable_hpd(struct sii8620 *ctx)
|
|
{
|
|
sii8620_setbits(ctx, REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID, 0);
|
|
sii8620_write_seq_static(ctx,
|
|
REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN,
|
|
REG_INTR8_MASK, 0
|
|
);
|
|
}
|
|
|
|
static void sii8620_enable_hpd(struct sii8620 *ctx)
|
|
{
|
|
sii8620_setbits(ctx, REG_TMDS_CSTAT_P3,
|
|
BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS
|
|
| BIT_TMDS_CSTAT_P3_CLR_AVI, ~0);
|
|
sii8620_write_seq_static(ctx,
|
|
REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN
|
|
| BIT_HPD_CTRL_HPD_HIGH,
|
|
);
|
|
}
|
|
|
|
static void sii8620_mhl_discover(struct sii8620 *ctx)
|
|
{
|
|
sii8620_write_seq_static(ctx,
|
|
REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
|
|
| BIT_DISC_CTRL9_DISC_PULSE_PROCEED,
|
|
REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_5K, VAL_PUP_20K),
|
|
REG_CBUS_DISC_INTR0_MASK, BIT_MHL3_EST_INT
|
|
| BIT_MHL_EST_INT
|
|
| BIT_NOT_MHL_EST_INT
|
|
| BIT_CBUS_MHL3_DISCON_INT
|
|
| BIT_CBUS_MHL12_DISCON_INT
|
|
| BIT_RGND_READY_INT,
|
|
REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
|
|
| BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
|
|
| BIT_MHL_PLL_CTL0_ZONE_MASK_OE,
|
|
REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE
|
|
| BIT_MHL_DP_CTL0_TX_OE_OVR,
|
|
REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
|
|
REG_MHL_DP_CTL1, 0xA2,
|
|
REG_MHL_DP_CTL2, 0x03,
|
|
REG_MHL_DP_CTL3, 0x35,
|
|
REG_MHL_DP_CTL5, 0x02,
|
|
REG_MHL_DP_CTL6, 0x02,
|
|
REG_MHL_DP_CTL7, 0x03,
|
|
REG_COC_CTLC, 0xFF,
|
|
REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12
|
|
| BIT_DPD_OSC_EN | BIT_DPD_PWRON_HSIC,
|
|
REG_COC_INTR_MASK, BIT_COC_PLL_LOCK_STATUS_CHANGE
|
|
| BIT_COC_CALIBRATION_DONE,
|
|
REG_CBUS_INT_1_MASK, BIT_CBUS_MSC_ABORT_RCVD
|
|
| BIT_CBUS_CMD_ABORT,
|
|
REG_CBUS_INT_0_MASK, BIT_CBUS_MSC_MT_DONE
|
|
| BIT_CBUS_HPD_CHG
|
|
| BIT_CBUS_MSC_MR_WRITE_STAT
|
|
| BIT_CBUS_MSC_MR_MSC_MSG
|
|
| BIT_CBUS_MSC_MR_WRITE_BURST
|
|
| BIT_CBUS_MSC_MR_SET_INT
|
|
| BIT_CBUS_MSC_MT_DONE_NACK
|
|
);
|
|
}
|
|
|
|
static void sii8620_peer_specific_init(struct sii8620 *ctx)
|
|
{
|
|
if (sii8620_is_mhl3(ctx))
|
|
sii8620_write_seq_static(ctx,
|
|
REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD,
|
|
REG_EMSCINTRMASK1,
|
|
BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR
|
|
);
|
|
else
|
|
sii8620_write_seq_static(ctx,
|
|
REG_HDCP2X_INTR0_MASK, 0x00,
|
|
REG_EMSCINTRMASK1, 0x00,
|
|
REG_HDCP2X_INTR0, 0xFF,
|
|
REG_INTR1, 0xFF,
|
|
REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD
|
|
| BIT_SYS_CTRL1_TX_CTRL_HDMI
|
|
);
|
|
}
|
|
|
|
#define SII8620_MHL_VERSION 0x32
|
|
#define SII8620_SCRATCHPAD_SIZE 16
|
|
#define SII8620_INT_STAT_SIZE 0x33
|
|
|
|
static void sii8620_set_dev_cap(struct sii8620 *ctx)
|
|
{
|
|
static const u8 devcap[MHL_DCAP_SIZE] = {
|
|
[MHL_DCAP_MHL_VERSION] = SII8620_MHL_VERSION,
|
|
[MHL_DCAP_CAT] = MHL_DCAP_CAT_SOURCE | MHL_DCAP_CAT_POWER,
|
|
[MHL_DCAP_ADOPTER_ID_H] = 0x01,
|
|
[MHL_DCAP_ADOPTER_ID_L] = 0x41,
|
|
[MHL_DCAP_VID_LINK_MODE] = MHL_DCAP_VID_LINK_RGB444
|
|
| MHL_DCAP_VID_LINK_PPIXEL
|
|
| MHL_DCAP_VID_LINK_16BPP,
|
|
[MHL_DCAP_AUD_LINK_MODE] = MHL_DCAP_AUD_LINK_2CH,
|
|
[MHL_DCAP_VIDEO_TYPE] = MHL_DCAP_VT_GRAPHICS,
|
|
[MHL_DCAP_LOG_DEV_MAP] = MHL_DCAP_LD_GUI,
|
|
[MHL_DCAP_BANDWIDTH] = 0x0f,
|
|
[MHL_DCAP_FEATURE_FLAG] = MHL_DCAP_FEATURE_RCP_SUPPORT
|
|
| MHL_DCAP_FEATURE_RAP_SUPPORT
|
|
| MHL_DCAP_FEATURE_SP_SUPPORT,
|
|
[MHL_DCAP_SCRATCHPAD_SIZE] = SII8620_SCRATCHPAD_SIZE,
|
|
[MHL_DCAP_INT_STAT_SIZE] = SII8620_INT_STAT_SIZE,
|
|
};
|
|
static const u8 xdcap[MHL_XDC_SIZE] = {
|
|
[MHL_XDC_ECBUS_SPEEDS] = MHL_XDC_ECBUS_S_075
|
|
| MHL_XDC_ECBUS_S_8BIT,
|
|
[MHL_XDC_TMDS_SPEEDS] = MHL_XDC_TMDS_150
|
|
| MHL_XDC_TMDS_300 | MHL_XDC_TMDS_600,
|
|
[MHL_XDC_ECBUS_ROLES] = MHL_XDC_DEV_HOST,
|
|
[MHL_XDC_LOG_DEV_MAPX] = MHL_XDC_LD_PHONE,
|
|
};
|
|
|
|
sii8620_write_buf(ctx, REG_MHL_DEVCAP_0, devcap, ARRAY_SIZE(devcap));
|
|
sii8620_write_buf(ctx, REG_MHL_EXTDEVCAP_0, xdcap, ARRAY_SIZE(xdcap));
|
|
}
|
|
|
|
static void sii8620_mhl_init(struct sii8620 *ctx)
|
|
{
|
|
sii8620_write_seq_static(ctx,
|
|
REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
|
|
REG_CBUS_MSC_COMPAT_CTRL,
|
|
BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN,
|
|
);
|
|
|
|
sii8620_peer_specific_init(ctx);
|
|
|
|
sii8620_disable_hpd(ctx);
|
|
|
|
sii8620_write_seq_static(ctx,
|
|
REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO,
|
|
REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
|
|
| BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
|
|
REG_TMDS0_CCTRL1, 0x90,
|
|
REG_TMDS_CLK_EN, 0x01,
|
|
REG_TMDS_CH_EN, 0x11,
|
|
REG_BGR_BIAS, 0x87,
|
|
REG_ALICE0_ZONE_CTRL, 0xE8,
|
|
REG_ALICE0_MODE_CTRL, 0x04,
|
|
);
|
|
sii8620_setbits(ctx, REG_LM_DDC, BIT_LM_DDC_SW_TPI_EN_DISABLED, 0);
|
|
sii8620_write_seq_static(ctx,
|
|
REG_TPI_HW_OPT3, 0x76,
|
|
REG_TMDS_CCTRL, BIT_TMDS_CCTRL_TMDS_OE,
|
|
REG_TPI_DTD_B2, 79,
|
|
);
|
|
sii8620_set_dev_cap(ctx);
|
|
sii8620_write_seq_static(ctx,
|
|
REG_MDT_XMIT_TIMEOUT, 100,
|
|
REG_MDT_XMIT_CTRL, 0x03,
|
|
REG_MDT_XFIFO_STAT, 0x00,
|
|
REG_MDT_RCV_TIMEOUT, 100,
|
|
REG_CBUS_LINK_CTRL_8, 0x1D,
|
|
);
|
|
|
|
sii8620_start_gen2_write_burst(ctx);
|
|
sii8620_write_seq_static(ctx,
|
|
REG_BIST_CTRL, 0x00,
|
|
REG_COC_CTL1, 0x10,
|
|
REG_COC_CTL2, 0x18,
|
|
REG_COC_CTLF, 0x07,
|
|
REG_COC_CTL11, 0xF8,
|
|
REG_COC_CTL17, 0x61,
|
|
REG_COC_CTL18, 0x46,
|
|
REG_COC_CTL19, 0x15,
|
|
REG_COC_CTL1A, 0x01,
|
|
REG_MHL_COC_CTL3, BIT_MHL_COC_CTL3_COC_AECHO_EN,
|
|
REG_MHL_COC_CTL4, 0x2D,
|
|
REG_MHL_COC_CTL5, 0xF9,
|
|
REG_MSC_HEARTBEAT_CTRL, 0x27,
|
|
);
|
|
sii8620_disable_gen2_write_burst(ctx);
|
|
|
|
sii8620_mt_write_stat(ctx, MHL_DST_REG(VERSION), SII8620_MHL_VERSION);
|
|
sii8620_mt_write_stat(ctx, MHL_DST_REG(CONNECTED_RDY),
|
|
MHL_DST_CONN_DCAP_RDY | MHL_DST_CONN_XDEVCAPP_SUPP
|
|
| MHL_DST_CONN_POW_STAT);
|
|
sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE), MHL_INT_RC_DCAP_CHG);
|
|
}
|
|
|
|
static void sii8620_emsc_enable(struct sii8620 *ctx)
|
|
{
|
|
u8 reg;
|
|
|
|
sii8620_setbits(ctx, REG_GENCTL, BIT_GENCTL_EMSC_EN
|
|
| BIT_GENCTL_CLR_EMSC_RFIFO
|
|
| BIT_GENCTL_CLR_EMSC_XFIFO, ~0);
|
|
sii8620_setbits(ctx, REG_GENCTL, BIT_GENCTL_CLR_EMSC_RFIFO
|
|
| BIT_GENCTL_CLR_EMSC_XFIFO, 0);
|
|
sii8620_setbits(ctx, REG_COMMECNT, BIT_COMMECNT_I2C_TO_EMSC_EN, ~0);
|
|
reg = sii8620_readb(ctx, REG_EMSCINTR);
|
|
sii8620_write(ctx, REG_EMSCINTR, reg);
|
|
sii8620_write(ctx, REG_EMSCINTRMASK, BIT_EMSCINTR_SPI_DVLD);
|
|
}
|
|
|
|
static int sii8620_wait_for_fsm_state(struct sii8620 *ctx, u8 state)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 10; ++i) {
|
|
u8 s = sii8620_readb(ctx, REG_COC_STAT_0);
|
|
|
|
if ((s & MSK_COC_STAT_0_FSM_STATE) == state)
|
|
return 0;
|
|
if (!(s & BIT_COC_STAT_0_PLL_LOCKED))
|
|
return -EBUSY;
|
|
usleep_range(4000, 6000);
|
|
}
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode)
|
|
{
|
|
int ret;
|
|
|
|
if (ctx->mode == mode)
|
|
return;
|
|
|
|
switch (mode) {
|
|
case CM_MHL1:
|
|
sii8620_write_seq_static(ctx,
|
|
REG_CBUS_MSC_COMPAT_CTRL, 0x02,
|
|
REG_M3_CTRL, VAL_M3_CTRL_MHL1_2_VALUE,
|
|
REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12
|
|
| BIT_DPD_OSC_EN,
|
|
REG_COC_INTR_MASK, 0
|
|
);
|
|
ctx->mode = mode;
|
|
break;
|
|
case CM_MHL3:
|
|
sii8620_write(ctx, REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE);
|
|
ctx->mode = mode;
|
|
return;
|
|
case CM_ECBUS_S:
|
|
sii8620_emsc_enable(ctx);
|
|
sii8620_write_seq_static(ctx,
|
|
REG_TTXSPINUMS, 4,
|
|
REG_TRXSPINUMS, 4,
|
|
REG_TTXHSICNUMS, 0x14,
|
|
REG_TRXHSICNUMS, 0x14,
|
|
REG_TTXTOTNUMS, 0x18,
|
|
REG_TRXTOTNUMS, 0x18,
|
|
REG_PWD_SRST, BIT_PWD_SRST_COC_DOC_RST
|
|
| BIT_PWD_SRST_CBUS_RST_SW_EN,
|
|
REG_MHL_COC_CTL1, 0xbd,
|
|
REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST_SW_EN,
|
|
REG_COC_CTLB, 0x01,
|
|
REG_COC_CTL0, 0x5c,
|
|
REG_COC_CTL14, 0x03,
|
|
REG_COC_CTL15, 0x80,
|
|
REG_MHL_DP_CTL6, BIT_MHL_DP_CTL6_DP_TAP1_SGN
|
|
| BIT_MHL_DP_CTL6_DP_TAP1_EN
|
|
| BIT_MHL_DP_CTL6_DT_PREDRV_FEEDCAP_EN,
|
|
REG_MHL_DP_CTL8, 0x03
|
|
);
|
|
ret = sii8620_wait_for_fsm_state(ctx, 0x03);
|
|
sii8620_write_seq_static(ctx,
|
|
REG_COC_CTL14, 0x00,
|
|
REG_COC_CTL15, 0x80
|
|
);
|
|
if (!ret)
|
|
sii8620_write(ctx, REG_CBUS3_CNVT, 0x85);
|
|
else
|
|
sii8620_disconnect(ctx);
|
|
return;
|
|
case CM_DISCONNECTED:
|
|
ctx->mode = mode;
|
|
break;
|
|
default:
|
|
dev_err(ctx->dev, "%s mode %d not supported\n", __func__, mode);
|
|
break;
|
|
}
|
|
|
|
sii8620_set_auto_zone(ctx);
|
|
|
|
if (mode != CM_MHL1)
|
|
return;
|
|
|
|
sii8620_write_seq_static(ctx,
|
|
REG_MHL_DP_CTL0, 0xBC,
|
|
REG_MHL_DP_CTL1, 0xBB,
|
|
REG_MHL_DP_CTL3, 0x48,
|
|
REG_MHL_DP_CTL5, 0x39,
|
|
REG_MHL_DP_CTL2, 0x2A,
|
|
REG_MHL_DP_CTL6, 0x2A,
|
|
REG_MHL_DP_CTL7, 0x08
|
|
);
|
|
}
|
|
|
|
static void sii8620_hpd_unplugged(struct sii8620 *ctx)
|
|
{
|
|
sii8620_disable_hpd(ctx);
|
|
ctx->sink_type = SINK_NONE;
|
|
ctx->sink_detected = false;
|
|
ctx->feature_complete = false;
|
|
kfree(ctx->edid);
|
|
ctx->edid = NULL;
|
|
}
|
|
|
|
static void sii8620_disconnect(struct sii8620 *ctx)
|
|
{
|
|
sii8620_disable_gen2_write_burst(ctx);
|
|
sii8620_stop_video(ctx);
|
|
msleep(100);
|
|
sii8620_cbus_reset(ctx);
|
|
sii8620_set_mode(ctx, CM_DISCONNECTED);
|
|
sii8620_write_seq_static(ctx,
|
|
REG_TX_ZONE_CTL1, 0,
|
|
REG_MHL_PLL_CTL0, 0x07,
|
|
REG_COC_CTL0, 0x40,
|
|
REG_CBUS3_CNVT, 0x84,
|
|
REG_COC_CTL14, 0x00,
|
|
REG_COC_CTL0, 0x40,
|
|
REG_HRXCTRL3, 0x07,
|
|
REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
|
|
| BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
|
|
| BIT_MHL_PLL_CTL0_ZONE_MASK_OE,
|
|
REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE
|
|
| BIT_MHL_DP_CTL0_TX_OE_OVR,
|
|
REG_MHL_DP_CTL1, 0xBB,
|
|
REG_MHL_DP_CTL3, 0x48,
|
|
REG_MHL_DP_CTL5, 0x3F,
|
|
REG_MHL_DP_CTL2, 0x2F,
|
|
REG_MHL_DP_CTL6, 0x2A,
|
|
REG_MHL_DP_CTL7, 0x03
|
|
);
|
|
sii8620_hpd_unplugged(ctx);
|
|
sii8620_write_seq_static(ctx,
|
|
REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
|
|
REG_MHL_COC_CTL1, 0x07,
|
|
REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
|
|
REG_DISC_CTRL8, 0x00,
|
|
REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
|
|
| BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
|
|
REG_INT_CTRL, 0x00,
|
|
REG_MSC_HEARTBEAT_CTRL, 0x27,
|
|
REG_DISC_CTRL1, 0x25,
|
|
REG_CBUS_DISC_INTR0, (u8)~BIT_RGND_READY_INT,
|
|
REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT,
|
|
REG_MDT_INT_1, 0xff,
|
|
REG_MDT_INT_1_MASK, 0x00,
|
|
REG_MDT_INT_0, 0xff,
|
|
REG_MDT_INT_0_MASK, 0x00,
|
|
REG_COC_INTR, 0xff,
|
|
REG_COC_INTR_MASK, 0x00,
|
|
REG_TRXINTH, 0xff,
|
|
REG_TRXINTMH, 0x00,
|
|
REG_CBUS_INT_0, 0xff,
|
|
REG_CBUS_INT_0_MASK, 0x00,
|
|
REG_CBUS_INT_1, 0xff,
|
|
REG_CBUS_INT_1_MASK, 0x00,
|
|
REG_EMSCINTR, 0xff,
|
|
REG_EMSCINTRMASK, 0x00,
|
|
REG_EMSCINTR1, 0xff,
|
|
REG_EMSCINTRMASK1, 0x00,
|
|
REG_INTR8, 0xff,
|
|
REG_INTR8_MASK, 0x00,
|
|
REG_TPI_INTR_ST0, 0xff,
|
|
REG_TPI_INTR_EN, 0x00,
|
|
REG_HDCP2X_INTR0, 0xff,
|
|
REG_HDCP2X_INTR0_MASK, 0x00,
|
|
REG_INTR9, 0xff,
|
|
REG_INTR9_MASK, 0x00,
|
|
REG_INTR3, 0xff,
|
|
REG_INTR3_MASK, 0x00,
|
|
REG_INTR5, 0xff,
|
|
REG_INTR5_MASK, 0x00,
|
|
REG_INTR2, 0xff,
|
|
REG_INTR2_MASK, 0x00,
|
|
);
|
|
memset(ctx->stat, 0, sizeof(ctx->stat));
|
|
memset(ctx->xstat, 0, sizeof(ctx->xstat));
|
|
memset(ctx->devcap, 0, sizeof(ctx->devcap));
|
|
memset(ctx->xdevcap, 0, sizeof(ctx->xdevcap));
|
|
ctx->devcap_read = false;
|
|
ctx->cbus_status = 0;
|
|
sii8620_mt_cleanup(ctx);
|
|
}
|
|
|
|
static void sii8620_mhl_disconnected(struct sii8620 *ctx)
|
|
{
|
|
sii8620_write_seq_static(ctx,
|
|
REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
|
|
REG_CBUS_MSC_COMPAT_CTRL,
|
|
BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN
|
|
);
|
|
sii8620_disconnect(ctx);
|
|
}
|
|
|
|
static void sii8620_irq_disc(struct sii8620 *ctx)
|
|
{
|
|
u8 stat = sii8620_readb(ctx, REG_CBUS_DISC_INTR0);
|
|
|
|
if (stat & VAL_CBUS_MHL_DISCON)
|
|
sii8620_mhl_disconnected(ctx);
|
|
|
|
if (stat & BIT_RGND_READY_INT) {
|
|
u8 stat2 = sii8620_readb(ctx, REG_DISC_STAT2);
|
|
|
|
if ((stat2 & MSK_DISC_STAT2_RGND) == VAL_RGND_1K) {
|
|
sii8620_mhl_discover(ctx);
|
|
} else {
|
|
sii8620_write_seq_static(ctx,
|
|
REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
|
|
| BIT_DISC_CTRL9_NOMHL_EST
|
|
| BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
|
|
REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT
|
|
| BIT_CBUS_MHL3_DISCON_INT
|
|
| BIT_CBUS_MHL12_DISCON_INT
|
|
| BIT_NOT_MHL_EST_INT
|
|
);
|
|
}
|
|
}
|
|
if (stat & BIT_MHL_EST_INT)
|
|
sii8620_mhl_init(ctx);
|
|
|
|
sii8620_write(ctx, REG_CBUS_DISC_INTR0, stat);
|
|
}
|
|
|
|
static void sii8620_read_burst(struct sii8620 *ctx)
|
|
{
|
|
u8 buf[17];
|
|
|
|
sii8620_read_buf(ctx, REG_MDT_RCV_READ_PORT, buf, ARRAY_SIZE(buf));
|
|
sii8620_write(ctx, REG_MDT_RCV_CTRL, BIT_MDT_RCV_CTRL_MDT_RCV_EN |
|
|
BIT_MDT_RCV_CTRL_MDT_DELAY_RCV_EN |
|
|
BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_CUR);
|
|
sii8620_readb(ctx, REG_MDT_RFIFO_STAT);
|
|
}
|
|
|
|
static void sii8620_irq_g2wb(struct sii8620 *ctx)
|
|
{
|
|
u8 stat = sii8620_readb(ctx, REG_MDT_INT_0);
|
|
|
|
if (stat & BIT_MDT_IDLE_AFTER_HAWB_DISABLE)
|
|
if (sii8620_is_mhl3(ctx))
|
|
sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE),
|
|
MHL_INT_RC_FEAT_COMPLETE);
|
|
|
|
if (stat & BIT_MDT_RFIFO_DATA_RDY)
|
|
sii8620_read_burst(ctx);
|
|
|
|
if (stat & BIT_MDT_XFIFO_EMPTY)
|
|
sii8620_write(ctx, REG_MDT_XMIT_CTRL, 0);
|
|
|
|
sii8620_write(ctx, REG_MDT_INT_0, stat);
|
|
}
|
|
|
|
static void sii8620_status_dcap_ready(struct sii8620 *ctx)
|
|
{
|
|
enum sii8620_mode mode;
|
|
|
|
mode = ctx->stat[MHL_DST_VERSION] >= 0x30 ? CM_MHL3 : CM_MHL1;
|
|
if (mode > ctx->mode)
|
|
sii8620_set_mode(ctx, mode);
|
|
sii8620_peer_specific_init(ctx);
|
|
sii8620_write(ctx, REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE
|
|
| BIT_INTR9_EDID_DONE | BIT_INTR9_EDID_ERROR);
|
|
}
|
|
|
|
static void sii8620_status_changed_path(struct sii8620 *ctx)
|
|
{
|
|
u8 link_mode;
|
|
|
|
if (ctx->use_packed_pixel)
|
|
link_mode = MHL_DST_LM_CLK_MODE_PACKED_PIXEL;
|
|
else
|
|
link_mode = MHL_DST_LM_CLK_MODE_NORMAL;
|
|
|
|
if (ctx->stat[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED)
|
|
link_mode |= MHL_DST_LM_PATH_ENABLED;
|
|
|
|
sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
|
|
link_mode);
|
|
}
|
|
|
|
static void sii8620_msc_mr_write_stat(struct sii8620 *ctx)
|
|
{
|
|
u8 st[MHL_DST_SIZE], xst[MHL_XDS_SIZE];
|
|
|
|
sii8620_read_buf(ctx, REG_MHL_STAT_0, st, MHL_DST_SIZE);
|
|
sii8620_read_buf(ctx, REG_MHL_EXTSTAT_0, xst, MHL_XDS_SIZE);
|
|
|
|
sii8620_update_array(ctx->stat, st, MHL_DST_SIZE);
|
|
sii8620_update_array(ctx->xstat, xst, MHL_XDS_SIZE);
|
|
|
|
if (ctx->stat[MHL_DST_CONNECTED_RDY] & st[MHL_DST_CONNECTED_RDY] &
|
|
MHL_DST_CONN_DCAP_RDY) {
|
|
sii8620_status_dcap_ready(ctx);
|
|
|
|
if (!sii8620_is_mhl3(ctx))
|
|
sii8620_mt_read_devcap(ctx, false);
|
|
}
|
|
|
|
if (st[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED)
|
|
sii8620_status_changed_path(ctx);
|
|
}
|
|
|
|
static void sii8620_ecbus_up(struct sii8620 *ctx, int ret)
|
|
{
|
|
if (ret < 0)
|
|
return;
|
|
|
|
sii8620_set_mode(ctx, CM_ECBUS_S);
|
|
}
|
|
|
|
static void sii8620_got_ecbus_speed(struct sii8620 *ctx, int ret)
|
|
{
|
|
if (ret < 0)
|
|
return;
|
|
|
|
sii8620_mt_write_stat(ctx, MHL_XDS_REG(CURR_ECBUS_MODE),
|
|
MHL_XDS_ECBUS_S | MHL_XDS_SLOT_MODE_8BIT);
|
|
sii8620_mt_rap(ctx, MHL_RAP_CBUS_MODE_UP);
|
|
sii8620_mt_set_cont(ctx, sii8620_ecbus_up);
|
|
}
|
|
|
|
static void sii8620_mhl_burst_emsc_support_set(struct mhl_burst_emsc_support *d,
|
|
enum mhl_burst_id id)
|
|
{
|
|
sii8620_mhl_burst_hdr_set(&d->hdr, MHL_BURST_ID_EMSC_SUPPORT);
|
|
d->num_entries = 1;
|
|
d->burst_id[0] = cpu_to_be16(id);
|
|
}
|
|
|
|
static void sii8620_send_features(struct sii8620 *ctx)
|
|
{
|
|
u8 buf[16];
|
|
|
|
sii8620_write(ctx, REG_MDT_XMIT_CTRL, BIT_MDT_XMIT_CTRL_EN
|
|
| BIT_MDT_XMIT_CTRL_FIXED_BURST_LEN);
|
|
sii8620_mhl_burst_emsc_support_set((void *)buf,
|
|
MHL_BURST_ID_HID_PAYLOAD);
|
|
sii8620_write_buf(ctx, REG_MDT_XMIT_WRITE_PORT, buf, ARRAY_SIZE(buf));
|
|
}
|
|
|
|
static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
|
|
{
|
|
bool pressed = !(scancode & MHL_RCP_KEY_RELEASED_MASK);
|
|
|
|
scancode &= MHL_RCP_KEY_ID_MASK;
|
|
|
|
if (!ctx->rc_dev) {
|
|
dev_dbg(ctx->dev, "RCP input device not initialized\n");
|
|
return false;
|
|
}
|
|
|
|
if (pressed)
|
|
rc_keydown(ctx->rc_dev, RC_PROTO_CEC, scancode, 0);
|
|
else
|
|
rc_keyup(ctx->rc_dev);
|
|
|
|
return true;
|
|
}
|
|
|
|
static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
|
|
{
|
|
u8 ints[MHL_INT_SIZE];
|
|
|
|
sii8620_read_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
|
|
sii8620_write_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
|
|
|
|
if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_DCAP_CHG) {
|
|
switch (ctx->mode) {
|
|
case CM_MHL3:
|
|
sii8620_mt_read_xdevcap_reg(ctx, MHL_XDC_ECBUS_SPEEDS);
|
|
sii8620_mt_set_cont(ctx, sii8620_got_ecbus_speed);
|
|
break;
|
|
case CM_ECBUS_S:
|
|
sii8620_mt_read_devcap(ctx, true);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_REQ)
|
|
sii8620_send_features(ctx);
|
|
if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_COMPLETE) {
|
|
ctx->feature_complete = true;
|
|
if (ctx->edid)
|
|
sii8620_enable_hpd(ctx);
|
|
}
|
|
}
|
|
|
|
static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx)
|
|
{
|
|
struct device *dev = ctx->dev;
|
|
|
|
if (list_empty(&ctx->mt_queue)) {
|
|
dev_err(dev, "unexpected MSC MT response\n");
|
|
return NULL;
|
|
}
|
|
|
|
return list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
|
|
}
|
|
|
|
static void sii8620_msc_mt_done(struct sii8620 *ctx)
|
|
{
|
|
struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx);
|
|
|
|
if (!msg)
|
|
return;
|
|
|
|
msg->ret = sii8620_readb(ctx, REG_MSC_MT_RCVD_DATA0);
|
|
ctx->mt_state = MT_STATE_DONE;
|
|
}
|
|
|
|
static void sii8620_msc_mr_msc_msg(struct sii8620 *ctx)
|
|
{
|
|
struct sii8620_mt_msg *msg;
|
|
u8 buf[2];
|
|
|
|
sii8620_read_buf(ctx, REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA, buf, 2);
|
|
|
|
switch (buf[0]) {
|
|
case MHL_MSC_MSG_RAPK:
|
|
msg = sii8620_msc_msg_first(ctx);
|
|
if (!msg)
|
|
return;
|
|
msg->ret = buf[1];
|
|
ctx->mt_state = MT_STATE_DONE;
|
|
break;
|
|
case MHL_MSC_MSG_RCP:
|
|
if (!sii8620_rcp_consume(ctx, buf[1]))
|
|
sii8620_mt_rcpe(ctx,
|
|
MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE);
|
|
sii8620_mt_rcpk(ctx, buf[1]);
|
|
break;
|
|
default:
|
|
dev_err(ctx->dev, "%s message type %d,%d not supported",
|
|
__func__, buf[0], buf[1]);
|
|
}
|
|
}
|
|
|
|
static void sii8620_irq_msc(struct sii8620 *ctx)
|
|
{
|
|
u8 stat = sii8620_readb(ctx, REG_CBUS_INT_0);
|
|
|
|
if (stat & ~BIT_CBUS_HPD_CHG)
|
|
sii8620_write(ctx, REG_CBUS_INT_0, stat & ~BIT_CBUS_HPD_CHG);
|
|
|
|
if (stat & BIT_CBUS_HPD_CHG) {
|
|
u8 cbus_stat = sii8620_readb(ctx, REG_CBUS_STATUS);
|
|
|
|
if ((cbus_stat ^ ctx->cbus_status) & BIT_CBUS_STATUS_CBUS_HPD) {
|
|
sii8620_write(ctx, REG_CBUS_INT_0, BIT_CBUS_HPD_CHG);
|
|
} else {
|
|
stat ^= BIT_CBUS_STATUS_CBUS_HPD;
|
|
cbus_stat ^= BIT_CBUS_STATUS_CBUS_HPD;
|
|
}
|
|
ctx->cbus_status = cbus_stat;
|
|
}
|
|
|
|
if (stat & BIT_CBUS_MSC_MR_WRITE_STAT)
|
|
sii8620_msc_mr_write_stat(ctx);
|
|
|
|
if (stat & BIT_CBUS_HPD_CHG) {
|
|
if (ctx->cbus_status & BIT_CBUS_STATUS_CBUS_HPD) {
|
|
ctx->sink_detected = true;
|
|
sii8620_identify_sink(ctx);
|
|
} else {
|
|
sii8620_hpd_unplugged(ctx);
|
|
}
|
|
}
|
|
|
|
if (stat & BIT_CBUS_MSC_MR_SET_INT)
|
|
sii8620_msc_mr_set_int(ctx);
|
|
|
|
if (stat & BIT_CBUS_MSC_MT_DONE)
|
|
sii8620_msc_mt_done(ctx);
|
|
|
|
if (stat & BIT_CBUS_MSC_MR_MSC_MSG)
|
|
sii8620_msc_mr_msc_msg(ctx);
|
|
}
|
|
|
|
static void sii8620_irq_coc(struct sii8620 *ctx)
|
|
{
|
|
u8 stat = sii8620_readb(ctx, REG_COC_INTR);
|
|
|
|
if (stat & BIT_COC_CALIBRATION_DONE) {
|
|
u8 cstat = sii8620_readb(ctx, REG_COC_STAT_0);
|
|
|
|
cstat &= BIT_COC_STAT_0_PLL_LOCKED | MSK_COC_STAT_0_FSM_STATE;
|
|
if (cstat == (BIT_COC_STAT_0_PLL_LOCKED | 0x02)) {
|
|
sii8620_write_seq_static(ctx,
|
|
REG_COC_CTLB, 0,
|
|
REG_TRXINTMH, BIT_TDM_INTR_SYNC_DATA
|
|
| BIT_TDM_INTR_SYNC_WAIT
|
|
);
|
|
}
|
|
}
|
|
|
|
sii8620_write(ctx, REG_COC_INTR, stat);
|
|
}
|
|
|
|
static void sii8620_irq_merr(struct sii8620 *ctx)
|
|
{
|
|
u8 stat = sii8620_readb(ctx, REG_CBUS_INT_1);
|
|
|
|
sii8620_write(ctx, REG_CBUS_INT_1, stat);
|
|
}
|
|
|
|
static void sii8620_irq_edid(struct sii8620 *ctx)
|
|
{
|
|
u8 stat = sii8620_readb(ctx, REG_INTR9);
|
|
|
|
sii8620_write(ctx, REG_INTR9, stat);
|
|
|
|
if (stat & BIT_INTR9_DEVCAP_DONE)
|
|
ctx->mt_state = MT_STATE_DONE;
|
|
}
|
|
|
|
static void sii8620_irq_scdt(struct sii8620 *ctx)
|
|
{
|
|
u8 stat = sii8620_readb(ctx, REG_INTR5);
|
|
|
|
if (stat & BIT_INTR_SCDT_CHANGE) {
|
|
u8 cstat = sii8620_readb(ctx, REG_TMDS_CSTAT_P3);
|
|
|
|
if (cstat & BIT_TMDS_CSTAT_P3_SCDT)
|
|
sii8620_start_video(ctx);
|
|
}
|
|
|
|
sii8620_write(ctx, REG_INTR5, stat);
|
|
}
|
|
|
|
static void sii8620_got_xdevcap(struct sii8620 *ctx, int ret)
|
|
{
|
|
if (ret < 0)
|
|
return;
|
|
|
|
sii8620_mt_read_devcap(ctx, false);
|
|
}
|
|
|
|
static void sii8620_irq_tdm(struct sii8620 *ctx)
|
|
{
|
|
u8 stat = sii8620_readb(ctx, REG_TRXINTH);
|
|
u8 tdm = sii8620_readb(ctx, REG_TRXSTA2);
|
|
|
|
if ((tdm & MSK_TDM_SYNCHRONIZED) == VAL_TDM_SYNCHRONIZED) {
|
|
ctx->mode = CM_ECBUS_S;
|
|
ctx->burst.rx_ack = 0;
|
|
ctx->burst.r_size = SII8620_BURST_BUF_LEN;
|
|
sii8620_burst_tx_rbuf_info(ctx, SII8620_BURST_BUF_LEN);
|
|
sii8620_mt_read_devcap(ctx, true);
|
|
sii8620_mt_set_cont(ctx, sii8620_got_xdevcap);
|
|
} else {
|
|
sii8620_write_seq_static(ctx,
|
|
REG_MHL_PLL_CTL2, 0,
|
|
REG_MHL_PLL_CTL2, BIT_MHL_PLL_CTL2_CLKDETECT_EN
|
|
);
|
|
}
|
|
|
|
sii8620_write(ctx, REG_TRXINTH, stat);
|
|
}
|
|
|
|
static void sii8620_irq_block(struct sii8620 *ctx)
|
|
{
|
|
u8 stat = sii8620_readb(ctx, REG_EMSCINTR);
|
|
|
|
if (stat & BIT_EMSCINTR_SPI_DVLD) {
|
|
u8 bstat = sii8620_readb(ctx, REG_SPIBURSTSTAT);
|
|
|
|
if (bstat & BIT_SPIBURSTSTAT_EMSC_NORMAL_MODE)
|
|
sii8620_burst_receive(ctx);
|
|
}
|
|
|
|
sii8620_write(ctx, REG_EMSCINTR, stat);
|
|
}
|
|
|
|
static void sii8620_irq_ddc(struct sii8620 *ctx)
|
|
{
|
|
u8 stat = sii8620_readb(ctx, REG_INTR3);
|
|
|
|
if (stat & BIT_DDC_CMD_DONE) {
|
|
sii8620_write(ctx, REG_INTR3_MASK, 0);
|
|
if (sii8620_is_mhl3(ctx) && !ctx->feature_complete)
|
|
sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE),
|
|
MHL_INT_RC_FEAT_REQ);
|
|
else
|
|
sii8620_enable_hpd(ctx);
|
|
}
|
|
sii8620_write(ctx, REG_INTR3, stat);
|
|
}
|
|
|
|
/* endian agnostic, non-volatile version of test_bit */
|
|
static bool sii8620_test_bit(unsigned int nr, const u8 *addr)
|
|
{
|
|
return 1 & (addr[nr / BITS_PER_BYTE] >> (nr % BITS_PER_BYTE));
|
|
}
|
|
|
|
static irqreturn_t sii8620_irq_thread(int irq, void *data)
|
|
{
|
|
static const struct {
|
|
int bit;
|
|
void (*handler)(struct sii8620 *ctx);
|
|
} irq_vec[] = {
|
|
{ BIT_FAST_INTR_STAT_DISC, sii8620_irq_disc },
|
|
{ BIT_FAST_INTR_STAT_G2WB, sii8620_irq_g2wb },
|
|
{ BIT_FAST_INTR_STAT_COC, sii8620_irq_coc },
|
|
{ BIT_FAST_INTR_STAT_TDM, sii8620_irq_tdm },
|
|
{ BIT_FAST_INTR_STAT_MSC, sii8620_irq_msc },
|
|
{ BIT_FAST_INTR_STAT_MERR, sii8620_irq_merr },
|
|
{ BIT_FAST_INTR_STAT_BLOCK, sii8620_irq_block },
|
|
{ BIT_FAST_INTR_STAT_EDID, sii8620_irq_edid },
|
|
{ BIT_FAST_INTR_STAT_DDC, sii8620_irq_ddc },
|
|
{ BIT_FAST_INTR_STAT_SCDT, sii8620_irq_scdt },
|
|
};
|
|
struct sii8620 *ctx = data;
|
|
u8 stats[LEN_FAST_INTR_STAT];
|
|
int i, ret;
|
|
|
|
mutex_lock(&ctx->lock);
|
|
|
|
sii8620_read_buf(ctx, REG_FAST_INTR_STAT, stats, ARRAY_SIZE(stats));
|
|
for (i = 0; i < ARRAY_SIZE(irq_vec); ++i)
|
|
if (sii8620_test_bit(irq_vec[i].bit, stats))
|
|
irq_vec[i].handler(ctx);
|
|
|
|
sii8620_burst_rx_all(ctx);
|
|
sii8620_mt_work(ctx);
|
|
sii8620_burst_send(ctx);
|
|
|
|
ret = sii8620_clear_error(ctx);
|
|
if (ret) {
|
|
dev_err(ctx->dev, "Error during IRQ handling, %d.\n", ret);
|
|
sii8620_mhl_disconnected(ctx);
|
|
}
|
|
mutex_unlock(&ctx->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sii8620_cable_in(struct sii8620 *ctx)
|
|
{
|
|
struct device *dev = ctx->dev;
|
|
u8 ver[5];
|
|
int ret;
|
|
|
|
ret = sii8620_hw_on(ctx);
|
|
if (ret) {
|
|
dev_err(dev, "Error powering on, %d.\n", ret);
|
|
return;
|
|
}
|
|
|
|
sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver));
|
|
ret = sii8620_clear_error(ctx);
|
|
if (ret) {
|
|
dev_err(dev, "Error accessing I2C bus, %d.\n", ret);
|
|
return;
|
|
}
|
|
|
|
dev_info(dev, "ChipID %02x%02x:%02x%02x rev %02x.\n", ver[1], ver[0],
|
|
ver[3], ver[2], ver[4]);
|
|
|
|
sii8620_write(ctx, REG_DPD,
|
|
BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN);
|
|
|
|
sii8620_xtal_set_rate(ctx);
|
|
sii8620_disconnect(ctx);
|
|
|
|
sii8620_write_seq_static(ctx,
|
|
REG_MHL_CBUS_CTL0, VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG
|
|
| VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734,
|
|
REG_MHL_CBUS_CTL1, VAL_MHL_CBUS_CTL1_1115_OHM,
|
|
REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN,
|
|
);
|
|
|
|
ret = sii8620_clear_error(ctx);
|
|
if (ret) {
|
|
dev_err(dev, "Error accessing I2C bus, %d.\n", ret);
|
|
return;
|
|
}
|
|
|
|
enable_irq(to_i2c_client(ctx->dev)->irq);
|
|
}
|
|
|
|
static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
|
|
{
|
|
struct rc_dev *rc_dev;
|
|
int ret;
|
|
|
|
rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
|
|
if (!rc_dev) {
|
|
dev_err(ctx->dev, "Failed to allocate RC device\n");
|
|
ctx->error = -ENOMEM;
|
|
return;
|
|
}
|
|
|
|
rc_dev->input_phys = "sii8620/input0";
|
|
rc_dev->input_id.bustype = BUS_VIRTUAL;
|
|
rc_dev->map_name = RC_MAP_CEC;
|
|
rc_dev->allowed_protocols = RC_PROTO_BIT_CEC;
|
|
rc_dev->driver_name = "sii8620";
|
|
rc_dev->device_name = "sii8620";
|
|
|
|
ret = rc_register_device(rc_dev);
|
|
|
|
if (ret) {
|
|
dev_err(ctx->dev, "Failed to register RC device\n");
|
|
ctx->error = ret;
|
|
rc_free_device(ctx->rc_dev);
|
|
return;
|
|
}
|
|
ctx->rc_dev = rc_dev;
|
|
}
|
|
|
|
static void sii8620_cable_out(struct sii8620 *ctx)
|
|
{
|
|
disable_irq(to_i2c_client(ctx->dev)->irq);
|
|
sii8620_hw_off(ctx);
|
|
}
|
|
|
|
static void sii8620_extcon_work(struct work_struct *work)
|
|
{
|
|
struct sii8620 *ctx =
|
|
container_of(work, struct sii8620, extcon_wq);
|
|
int state = extcon_get_state(ctx->extcon, EXTCON_DISP_MHL);
|
|
|
|
if (state == ctx->cable_state)
|
|
return;
|
|
|
|
ctx->cable_state = state;
|
|
|
|
if (state > 0)
|
|
sii8620_cable_in(ctx);
|
|
else
|
|
sii8620_cable_out(ctx);
|
|
}
|
|
|
|
static int sii8620_extcon_notifier(struct notifier_block *self,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct sii8620 *ctx =
|
|
container_of(self, struct sii8620, extcon_nb);
|
|
|
|
schedule_work(&ctx->extcon_wq);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int sii8620_extcon_init(struct sii8620 *ctx)
|
|
{
|
|
struct extcon_dev *edev;
|
|
struct device_node *musb, *muic;
|
|
int ret;
|
|
|
|
/* get micro-USB connector node */
|
|
musb = of_graph_get_remote_node(ctx->dev->of_node, 1, -1);
|
|
/* next get micro-USB Interface Controller node */
|
|
muic = of_get_next_parent(musb);
|
|
|
|
if (!muic) {
|
|
dev_info(ctx->dev, "no extcon found, switching to 'always on' mode\n");
|
|
return 0;
|
|
}
|
|
|
|
edev = extcon_find_edev_by_node(muic);
|
|
of_node_put(muic);
|
|
if (IS_ERR(edev)) {
|
|
if (PTR_ERR(edev) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
dev_err(ctx->dev, "Invalid or missing extcon\n");
|
|
return PTR_ERR(edev);
|
|
}
|
|
|
|
ctx->extcon = edev;
|
|
ctx->extcon_nb.notifier_call = sii8620_extcon_notifier;
|
|
INIT_WORK(&ctx->extcon_wq, sii8620_extcon_work);
|
|
ret = extcon_register_notifier(edev, EXTCON_DISP_MHL, &ctx->extcon_nb);
|
|
if (ret) {
|
|
dev_err(ctx->dev, "failed to register notifier for MHL\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge)
|
|
{
|
|
return container_of(bridge, struct sii8620, bridge);
|
|
}
|
|
|
|
static int sii8620_attach(struct drm_bridge *bridge)
|
|
{
|
|
struct sii8620 *ctx = bridge_to_sii8620(bridge);
|
|
|
|
sii8620_init_rcp_input_dev(ctx);
|
|
|
|
return sii8620_clear_error(ctx);
|
|
}
|
|
|
|
static void sii8620_detach(struct drm_bridge *bridge)
|
|
{
|
|
struct sii8620 *ctx = bridge_to_sii8620(bridge);
|
|
|
|
rc_unregister_device(ctx->rc_dev);
|
|
}
|
|
|
|
static int sii8620_is_packing_required(struct sii8620 *ctx,
|
|
const struct drm_display_mode *mode)
|
|
{
|
|
int max_pclk, max_pclk_pp_mode;
|
|
|
|
if (sii8620_is_mhl3(ctx)) {
|
|
max_pclk = MHL3_MAX_PCLK;
|
|
max_pclk_pp_mode = MHL3_MAX_PCLK_PP_MODE;
|
|
} else {
|
|
max_pclk = MHL1_MAX_PCLK;
|
|
max_pclk_pp_mode = MHL1_MAX_PCLK_PP_MODE;
|
|
}
|
|
|
|
if (mode->clock < max_pclk)
|
|
return 0;
|
|
else if (mode->clock < max_pclk_pp_mode)
|
|
return 1;
|
|
else
|
|
return -1;
|
|
}
|
|
|
|
static enum drm_mode_status sii8620_mode_valid(struct drm_bridge *bridge,
|
|
const struct drm_display_mode *mode)
|
|
{
|
|
struct sii8620 *ctx = bridge_to_sii8620(bridge);
|
|
int pack_required = sii8620_is_packing_required(ctx, mode);
|
|
bool can_pack = ctx->devcap[MHL_DCAP_VID_LINK_MODE] &
|
|
MHL_DCAP_VID_LINK_PPIXEL;
|
|
|
|
switch (pack_required) {
|
|
case 0:
|
|
return MODE_OK;
|
|
case 1:
|
|
return (can_pack) ? MODE_OK : MODE_CLOCK_HIGH;
|
|
default:
|
|
return MODE_CLOCK_HIGH;
|
|
}
|
|
}
|
|
|
|
static bool sii8620_mode_fixup(struct drm_bridge *bridge,
|
|
const struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
struct sii8620 *ctx = bridge_to_sii8620(bridge);
|
|
|
|
mutex_lock(&ctx->lock);
|
|
|
|
ctx->use_packed_pixel = sii8620_is_packing_required(ctx, adjusted_mode);
|
|
|
|
mutex_unlock(&ctx->lock);
|
|
|
|
return true;
|
|
}
|
|
|
|
static const struct drm_bridge_funcs sii8620_bridge_funcs = {
|
|
.attach = sii8620_attach,
|
|
.detach = sii8620_detach,
|
|
.mode_fixup = sii8620_mode_fixup,
|
|
.mode_valid = sii8620_mode_valid,
|
|
};
|
|
|
|
static int sii8620_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct sii8620 *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
ctx->dev = dev;
|
|
mutex_init(&ctx->lock);
|
|
INIT_LIST_HEAD(&ctx->mt_queue);
|
|
|
|
ctx->clk_xtal = devm_clk_get(dev, "xtal");
|
|
if (IS_ERR(ctx->clk_xtal)) {
|
|
dev_err(dev, "failed to get xtal clock from DT\n");
|
|
return PTR_ERR(ctx->clk_xtal);
|
|
}
|
|
|
|
if (!client->irq) {
|
|
dev_err(dev, "no irq provided\n");
|
|
return -EINVAL;
|
|
}
|
|
irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
|
|
ret = devm_request_threaded_irq(dev, client->irq, NULL,
|
|
sii8620_irq_thread,
|
|
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
|
|
"sii8620", ctx);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to install IRQ handler\n");
|
|
return ret;
|
|
}
|
|
|
|
ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(ctx->gpio_reset)) {
|
|
dev_err(dev, "failed to get reset gpio from DT\n");
|
|
return PTR_ERR(ctx->gpio_reset);
|
|
}
|
|
|
|
ctx->supplies[0].supply = "cvcc10";
|
|
ctx->supplies[1].supply = "iovcc18";
|
|
ret = devm_regulator_bulk_get(dev, 2, ctx->supplies);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sii8620_extcon_init(ctx);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "failed to initialize EXTCON\n");
|
|
return ret;
|
|
}
|
|
|
|
i2c_set_clientdata(client, ctx);
|
|
|
|
ctx->bridge.funcs = &sii8620_bridge_funcs;
|
|
ctx->bridge.of_node = dev->of_node;
|
|
drm_bridge_add(&ctx->bridge);
|
|
|
|
if (!ctx->extcon)
|
|
sii8620_cable_in(ctx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sii8620_remove(struct i2c_client *client)
|
|
{
|
|
struct sii8620 *ctx = i2c_get_clientdata(client);
|
|
|
|
if (ctx->extcon) {
|
|
extcon_unregister_notifier(ctx->extcon, EXTCON_DISP_MHL,
|
|
&ctx->extcon_nb);
|
|
flush_work(&ctx->extcon_wq);
|
|
if (ctx->cable_state > 0)
|
|
sii8620_cable_out(ctx);
|
|
} else {
|
|
sii8620_cable_out(ctx);
|
|
}
|
|
drm_bridge_remove(&ctx->bridge);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sii8620_dt_match[] = {
|
|
{ .compatible = "sil,sii8620" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sii8620_dt_match);
|
|
|
|
static const struct i2c_device_id sii8620_id[] = {
|
|
{ "sii8620", 0 },
|
|
{ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, sii8620_id);
|
|
static struct i2c_driver sii8620_driver = {
|
|
.driver = {
|
|
.name = "sii8620",
|
|
.of_match_table = of_match_ptr(sii8620_dt_match),
|
|
},
|
|
.probe = sii8620_probe,
|
|
.remove = sii8620_remove,
|
|
.id_table = sii8620_id,
|
|
};
|
|
|
|
module_i2c_driver(sii8620_driver);
|
|
MODULE_LICENSE("GPL v2");
|