mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 22:41:11 +07:00
d2912cb15b
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1479 lines
37 KiB
ArmAsm
1479 lines
37 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* linux/arch/arm/boot/compressed/head.S
|
|
*
|
|
* Copyright (C) 1996-2002 Russell King
|
|
* Copyright (C) 2004 Hyok S. Choi (MPU support)
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/v7m.h>
|
|
|
|
#include "efi-header.S"
|
|
|
|
AR_CLASS( .arch armv7-a )
|
|
M_CLASS( .arch armv7-m )
|
|
|
|
/*
|
|
* Debugging stuff
|
|
*
|
|
* Note that these macros must not contain any code which is not
|
|
* 100% relocatable. Any attempt to do so will result in a crash.
|
|
* Please select one of the following when turning on debugging.
|
|
*/
|
|
#ifdef DEBUG
|
|
|
|
#if defined(CONFIG_DEBUG_ICEDCC)
|
|
|
|
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
|
|
.macro loadsp, rb, tmp1, tmp2
|
|
.endm
|
|
.macro writeb, ch, rb
|
|
mcr p14, 0, \ch, c0, c5, 0
|
|
.endm
|
|
#elif defined(CONFIG_CPU_XSCALE)
|
|
.macro loadsp, rb, tmp1, tmp2
|
|
.endm
|
|
.macro writeb, ch, rb
|
|
mcr p14, 0, \ch, c8, c0, 0
|
|
.endm
|
|
#else
|
|
.macro loadsp, rb, tmp1, tmp2
|
|
.endm
|
|
.macro writeb, ch, rb
|
|
mcr p14, 0, \ch, c1, c0, 0
|
|
.endm
|
|
#endif
|
|
|
|
#else
|
|
|
|
#include CONFIG_DEBUG_LL_INCLUDE
|
|
|
|
.macro writeb, ch, rb
|
|
senduart \ch, \rb
|
|
.endm
|
|
|
|
#if defined(CONFIG_ARCH_SA1100)
|
|
.macro loadsp, rb, tmp1, tmp2
|
|
mov \rb, #0x80000000 @ physical base address
|
|
#ifdef CONFIG_DEBUG_LL_SER3
|
|
add \rb, \rb, #0x00050000 @ Ser3
|
|
#else
|
|
add \rb, \rb, #0x00010000 @ Ser1
|
|
#endif
|
|
.endm
|
|
#else
|
|
.macro loadsp, rb, tmp1, tmp2
|
|
addruart \rb, \tmp1, \tmp2
|
|
.endm
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
.macro kputc,val
|
|
mov r0, \val
|
|
bl putc
|
|
.endm
|
|
|
|
.macro kphex,val,len
|
|
mov r0, \val
|
|
mov r1, #\len
|
|
bl phex
|
|
.endm
|
|
|
|
.macro debug_reloc_start
|
|
#ifdef DEBUG
|
|
kputc #'\n'
|
|
kphex r6, 8 /* processor id */
|
|
kputc #':'
|
|
kphex r7, 8 /* architecture id */
|
|
#ifdef CONFIG_CPU_CP15
|
|
kputc #':'
|
|
mrc p15, 0, r0, c1, c0
|
|
kphex r0, 8 /* control reg */
|
|
#endif
|
|
kputc #'\n'
|
|
kphex r5, 8 /* decompressed kernel start */
|
|
kputc #'-'
|
|
kphex r9, 8 /* decompressed kernel end */
|
|
kputc #'>'
|
|
kphex r4, 8 /* kernel execution address */
|
|
kputc #'\n'
|
|
#endif
|
|
.endm
|
|
|
|
.macro debug_reloc_end
|
|
#ifdef DEBUG
|
|
kphex r5, 8 /* end of kernel */
|
|
kputc #'\n'
|
|
mov r0, r4
|
|
bl memdump /* dump 256 bytes at start of kernel */
|
|
#endif
|
|
.endm
|
|
|
|
/*
|
|
* Debug kernel copy by printing the memory addresses involved
|
|
*/
|
|
.macro dbgkc, begin, end, cbegin, cend
|
|
#ifdef DEBUG
|
|
kputc #'\n'
|
|
kputc #'C'
|
|
kputc #':'
|
|
kputc #'0'
|
|
kputc #'x'
|
|
kphex \begin, 8 /* Start of compressed kernel */
|
|
kputc #'-'
|
|
kputc #'0'
|
|
kputc #'x'
|
|
kphex \end, 8 /* End of compressed kernel */
|
|
kputc #'-'
|
|
kputc #'>'
|
|
kputc #'0'
|
|
kputc #'x'
|
|
kphex \cbegin, 8 /* Start of kernel copy */
|
|
kputc #'-'
|
|
kputc #'0'
|
|
kputc #'x'
|
|
kphex \cend, 8 /* End of kernel copy */
|
|
kputc #'\n'
|
|
kputc #'\r'
|
|
#endif
|
|
.endm
|
|
|
|
.section ".start", #alloc, #execinstr
|
|
/*
|
|
* sort out different calling conventions
|
|
*/
|
|
.align
|
|
/*
|
|
* Always enter in ARM state for CPUs that support the ARM ISA.
|
|
* As of today (2014) that's exactly the members of the A and R
|
|
* classes.
|
|
*/
|
|
AR_CLASS( .arm )
|
|
start:
|
|
.type start,#function
|
|
.rept 7
|
|
__nop
|
|
.endr
|
|
#ifndef CONFIG_THUMB2_KERNEL
|
|
mov r0, r0
|
|
#else
|
|
AR_CLASS( sub pc, pc, #3 ) @ A/R: switch to Thumb2 mode
|
|
M_CLASS( nop.w ) @ M: already in Thumb2 mode
|
|
.thumb
|
|
#endif
|
|
W(b) 1f
|
|
|
|
.word _magic_sig @ Magic numbers to help the loader
|
|
.word _magic_start @ absolute load/run zImage address
|
|
.word _magic_end @ zImage end address
|
|
.word 0x04030201 @ endianness flag
|
|
.word 0x45454545 @ another magic number to indicate
|
|
.word _magic_table @ additional data table
|
|
|
|
__EFI_HEADER
|
|
1:
|
|
ARM_BE8( setend be ) @ go BE8 if compiled for BE8
|
|
AR_CLASS( mrs r9, cpsr )
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
bl __hyp_stub_install @ get into SVC mode, reversibly
|
|
#endif
|
|
mov r7, r1 @ save architecture ID
|
|
mov r8, r2 @ save atags pointer
|
|
|
|
#ifndef CONFIG_CPU_V7M
|
|
/*
|
|
* Booting from Angel - need to enter SVC mode and disable
|
|
* FIQs/IRQs (numeric definitions from angel arm.h source).
|
|
* We only do this if we were in user mode on entry.
|
|
*/
|
|
mrs r2, cpsr @ get current mode
|
|
tst r2, #3 @ not user?
|
|
bne not_angel
|
|
mov r0, #0x17 @ angel_SWIreason_EnterSVC
|
|
ARM( swi 0x123456 ) @ angel_SWI_ARM
|
|
THUMB( svc 0xab ) @ angel_SWI_THUMB
|
|
not_angel:
|
|
safe_svcmode_maskall r0
|
|
msr spsr_cxsf, r9 @ Save the CPU boot mode in
|
|
@ SPSR
|
|
#endif
|
|
/*
|
|
* Note that some cache flushing and other stuff may
|
|
* be needed here - is there an Angel SWI call for this?
|
|
*/
|
|
|
|
/*
|
|
* some architecture specific code can be inserted
|
|
* by the linker here, but it should preserve r7, r8, and r9.
|
|
*/
|
|
|
|
.text
|
|
|
|
#ifdef CONFIG_AUTO_ZRELADDR
|
|
/*
|
|
* Find the start of physical memory. As we are executing
|
|
* without the MMU on, we are in the physical address space.
|
|
* We just need to get rid of any offset by aligning the
|
|
* address.
|
|
*
|
|
* This alignment is a balance between the requirements of
|
|
* different platforms - we have chosen 128MB to allow
|
|
* platforms which align the start of their physical memory
|
|
* to 128MB to use this feature, while allowing the zImage
|
|
* to be placed within the first 128MB of memory on other
|
|
* platforms. Increasing the alignment means we place
|
|
* stricter alignment requirements on the start of physical
|
|
* memory, but relaxing it means that we break people who
|
|
* are already placing their zImage in (eg) the top 64MB
|
|
* of this range.
|
|
*/
|
|
mov r4, pc
|
|
and r4, r4, #0xf8000000
|
|
/* Determine final kernel image address. */
|
|
add r4, r4, #TEXT_OFFSET
|
|
#else
|
|
ldr r4, =zreladdr
|
|
#endif
|
|
|
|
/*
|
|
* Set up a page table only if it won't overwrite ourself.
|
|
* That means r4 < pc || r4 - 16k page directory > &_end.
|
|
* Given that r4 > &_end is most unfrequent, we add a rough
|
|
* additional 1MB of room for a possible appended DTB.
|
|
*/
|
|
mov r0, pc
|
|
cmp r0, r4
|
|
ldrcc r0, LC0+32
|
|
addcc r0, r0, pc
|
|
cmpcc r4, r0
|
|
orrcc r4, r4, #1 @ remember we skipped cache_on
|
|
blcs cache_on
|
|
|
|
restart: adr r0, LC0
|
|
ldmia r0, {r1, r2, r3, r6, r10, r11, r12}
|
|
ldr sp, [r0, #28]
|
|
|
|
/*
|
|
* We might be running at a different address. We need
|
|
* to fix up various pointers.
|
|
*/
|
|
sub r0, r0, r1 @ calculate the delta offset
|
|
add r6, r6, r0 @ _edata
|
|
add r10, r10, r0 @ inflated kernel size location
|
|
|
|
/*
|
|
* The kernel build system appends the size of the
|
|
* decompressed kernel at the end of the compressed data
|
|
* in little-endian form.
|
|
*/
|
|
ldrb r9, [r10, #0]
|
|
ldrb lr, [r10, #1]
|
|
orr r9, r9, lr, lsl #8
|
|
ldrb lr, [r10, #2]
|
|
ldrb r10, [r10, #3]
|
|
orr r9, r9, lr, lsl #16
|
|
orr r9, r9, r10, lsl #24
|
|
|
|
#ifndef CONFIG_ZBOOT_ROM
|
|
/* malloc space is above the relocated stack (64k max) */
|
|
add sp, sp, r0
|
|
add r10, sp, #0x10000
|
|
#else
|
|
/*
|
|
* With ZBOOT_ROM the bss/stack is non relocatable,
|
|
* but someone could still run this code from RAM,
|
|
* in which case our reference is _edata.
|
|
*/
|
|
mov r10, r6
|
|
#endif
|
|
|
|
mov r5, #0 @ init dtb size to 0
|
|
#ifdef CONFIG_ARM_APPENDED_DTB
|
|
/*
|
|
* r0 = delta
|
|
* r2 = BSS start
|
|
* r3 = BSS end
|
|
* r4 = final kernel address (possibly with LSB set)
|
|
* r5 = appended dtb size (still unknown)
|
|
* r6 = _edata
|
|
* r7 = architecture ID
|
|
* r8 = atags/device tree pointer
|
|
* r9 = size of decompressed image
|
|
* r10 = end of this image, including bss/stack/malloc space if non XIP
|
|
* r11 = GOT start
|
|
* r12 = GOT end
|
|
* sp = stack pointer
|
|
*
|
|
* if there are device trees (dtb) appended to zImage, advance r10 so that the
|
|
* dtb data will get relocated along with the kernel if necessary.
|
|
*/
|
|
|
|
ldr lr, [r6, #0]
|
|
#ifndef __ARMEB__
|
|
ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian
|
|
#else
|
|
ldr r1, =0xd00dfeed
|
|
#endif
|
|
cmp lr, r1
|
|
bne dtb_check_done @ not found
|
|
|
|
#ifdef CONFIG_ARM_ATAG_DTB_COMPAT
|
|
/*
|
|
* OK... Let's do some funky business here.
|
|
* If we do have a DTB appended to zImage, and we do have
|
|
* an ATAG list around, we want the later to be translated
|
|
* and folded into the former here. No GOT fixup has occurred
|
|
* yet, but none of the code we're about to call uses any
|
|
* global variable.
|
|
*/
|
|
|
|
/* Get the initial DTB size */
|
|
ldr r5, [r6, #4]
|
|
#ifndef __ARMEB__
|
|
/* convert to little endian */
|
|
eor r1, r5, r5, ror #16
|
|
bic r1, r1, #0x00ff0000
|
|
mov r5, r5, ror #8
|
|
eor r5, r5, r1, lsr #8
|
|
#endif
|
|
/* 50% DTB growth should be good enough */
|
|
add r5, r5, r5, lsr #1
|
|
/* preserve 64-bit alignment */
|
|
add r5, r5, #7
|
|
bic r5, r5, #7
|
|
/* clamp to 32KB min and 1MB max */
|
|
cmp r5, #(1 << 15)
|
|
movlo r5, #(1 << 15)
|
|
cmp r5, #(1 << 20)
|
|
movhi r5, #(1 << 20)
|
|
/* temporarily relocate the stack past the DTB work space */
|
|
add sp, sp, r5
|
|
|
|
stmfd sp!, {r0-r3, ip, lr}
|
|
mov r0, r8
|
|
mov r1, r6
|
|
mov r2, r5
|
|
bl atags_to_fdt
|
|
|
|
/*
|
|
* If returned value is 1, there is no ATAG at the location
|
|
* pointed by r8. Try the typical 0x100 offset from start
|
|
* of RAM and hope for the best.
|
|
*/
|
|
cmp r0, #1
|
|
sub r0, r4, #TEXT_OFFSET
|
|
bic r0, r0, #1
|
|
add r0, r0, #0x100
|
|
mov r1, r6
|
|
mov r2, r5
|
|
bleq atags_to_fdt
|
|
|
|
ldmfd sp!, {r0-r3, ip, lr}
|
|
sub sp, sp, r5
|
|
#endif
|
|
|
|
mov r8, r6 @ use the appended device tree
|
|
|
|
/*
|
|
* Make sure that the DTB doesn't end up in the final
|
|
* kernel's .bss area. To do so, we adjust the decompressed
|
|
* kernel size to compensate if that .bss size is larger
|
|
* than the relocated code.
|
|
*/
|
|
ldr r5, =_kernel_bss_size
|
|
adr r1, wont_overwrite
|
|
sub r1, r6, r1
|
|
subs r1, r5, r1
|
|
addhi r9, r9, r1
|
|
|
|
/* Get the current DTB size */
|
|
ldr r5, [r6, #4]
|
|
#ifndef __ARMEB__
|
|
/* convert r5 (dtb size) to little endian */
|
|
eor r1, r5, r5, ror #16
|
|
bic r1, r1, #0x00ff0000
|
|
mov r5, r5, ror #8
|
|
eor r5, r5, r1, lsr #8
|
|
#endif
|
|
|
|
/* preserve 64-bit alignment */
|
|
add r5, r5, #7
|
|
bic r5, r5, #7
|
|
|
|
/* relocate some pointers past the appended dtb */
|
|
add r6, r6, r5
|
|
add r10, r10, r5
|
|
add sp, sp, r5
|
|
dtb_check_done:
|
|
#endif
|
|
|
|
/*
|
|
* Check to see if we will overwrite ourselves.
|
|
* r4 = final kernel address (possibly with LSB set)
|
|
* r9 = size of decompressed image
|
|
* r10 = end of this image, including bss/stack/malloc space if non XIP
|
|
* We basically want:
|
|
* r4 - 16k page directory >= r10 -> OK
|
|
* r4 + image length <= address of wont_overwrite -> OK
|
|
* Note: the possible LSB in r4 is harmless here.
|
|
*/
|
|
add r10, r10, #16384
|
|
cmp r4, r10
|
|
bhs wont_overwrite
|
|
add r10, r4, r9
|
|
adr r9, wont_overwrite
|
|
cmp r10, r9
|
|
bls wont_overwrite
|
|
|
|
/*
|
|
* Relocate ourselves past the end of the decompressed kernel.
|
|
* r6 = _edata
|
|
* r10 = end of the decompressed kernel
|
|
* Because we always copy ahead, we need to do it from the end and go
|
|
* backward in case the source and destination overlap.
|
|
*/
|
|
/*
|
|
* Bump to the next 256-byte boundary with the size of
|
|
* the relocation code added. This avoids overwriting
|
|
* ourself when the offset is small.
|
|
*/
|
|
add r10, r10, #((reloc_code_end - restart + 256) & ~255)
|
|
bic r10, r10, #255
|
|
|
|
/* Get start of code we want to copy and align it down. */
|
|
adr r5, restart
|
|
bic r5, r5, #31
|
|
|
|
/* Relocate the hyp vector base if necessary */
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
mrs r0, spsr
|
|
and r0, r0, #MODE_MASK
|
|
cmp r0, #HYP_MODE
|
|
bne 1f
|
|
|
|
/*
|
|
* Compute the address of the hyp vectors after relocation.
|
|
* This requires some arithmetic since we cannot directly
|
|
* reference __hyp_stub_vectors in a PC-relative way.
|
|
* Call __hyp_set_vectors with the new address so that we
|
|
* can HVC again after the copy.
|
|
*/
|
|
0: adr r0, 0b
|
|
movw r1, #:lower16:__hyp_stub_vectors - 0b
|
|
movt r1, #:upper16:__hyp_stub_vectors - 0b
|
|
add r0, r0, r1
|
|
sub r0, r0, r5
|
|
add r0, r0, r10
|
|
bl __hyp_set_vectors
|
|
1:
|
|
#endif
|
|
|
|
sub r9, r6, r5 @ size to copy
|
|
add r9, r9, #31 @ rounded up to a multiple
|
|
bic r9, r9, #31 @ ... of 32 bytes
|
|
add r6, r9, r5
|
|
add r9, r9, r10
|
|
|
|
#ifdef DEBUG
|
|
sub r10, r6, r5
|
|
sub r10, r9, r10
|
|
/*
|
|
* We are about to copy the kernel to a new memory area.
|
|
* The boundaries of the new memory area can be found in
|
|
* r10 and r9, whilst r5 and r6 contain the boundaries
|
|
* of the memory we are going to copy.
|
|
* Calling dbgkc will help with the printing of this
|
|
* information.
|
|
*/
|
|
dbgkc r5, r6, r10, r9
|
|
#endif
|
|
|
|
1: ldmdb r6!, {r0 - r3, r10 - r12, lr}
|
|
cmp r6, r5
|
|
stmdb r9!, {r0 - r3, r10 - r12, lr}
|
|
bhi 1b
|
|
|
|
/* Preserve offset to relocated code. */
|
|
sub r6, r9, r6
|
|
|
|
#ifndef CONFIG_ZBOOT_ROM
|
|
/* cache_clean_flush may use the stack, so relocate it */
|
|
add sp, sp, r6
|
|
#endif
|
|
|
|
bl cache_clean_flush
|
|
|
|
badr r0, restart
|
|
add r0, r0, r6
|
|
mov pc, r0
|
|
|
|
wont_overwrite:
|
|
/*
|
|
* If delta is zero, we are running at the address we were linked at.
|
|
* r0 = delta
|
|
* r2 = BSS start
|
|
* r3 = BSS end
|
|
* r4 = kernel execution address (possibly with LSB set)
|
|
* r5 = appended dtb size (0 if not present)
|
|
* r7 = architecture ID
|
|
* r8 = atags pointer
|
|
* r11 = GOT start
|
|
* r12 = GOT end
|
|
* sp = stack pointer
|
|
*/
|
|
orrs r1, r0, r5
|
|
beq not_relocated
|
|
|
|
add r11, r11, r0
|
|
add r12, r12, r0
|
|
|
|
#ifndef CONFIG_ZBOOT_ROM
|
|
/*
|
|
* If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
|
|
* we need to fix up pointers into the BSS region.
|
|
* Note that the stack pointer has already been fixed up.
|
|
*/
|
|
add r2, r2, r0
|
|
add r3, r3, r0
|
|
|
|
/*
|
|
* Relocate all entries in the GOT table.
|
|
* Bump bss entries to _edata + dtb size
|
|
*/
|
|
1: ldr r1, [r11, #0] @ relocate entries in the GOT
|
|
add r1, r1, r0 @ This fixes up C references
|
|
cmp r1, r2 @ if entry >= bss_start &&
|
|
cmphs r3, r1 @ bss_end > entry
|
|
addhi r1, r1, r5 @ entry += dtb size
|
|
str r1, [r11], #4 @ next entry
|
|
cmp r11, r12
|
|
blo 1b
|
|
|
|
/* bump our bss pointers too */
|
|
add r2, r2, r5
|
|
add r3, r3, r5
|
|
|
|
#else
|
|
|
|
/*
|
|
* Relocate entries in the GOT table. We only relocate
|
|
* the entries that are outside the (relocated) BSS region.
|
|
*/
|
|
1: ldr r1, [r11, #0] @ relocate entries in the GOT
|
|
cmp r1, r2 @ entry < bss_start ||
|
|
cmphs r3, r1 @ _end < entry
|
|
addlo r1, r1, r0 @ table. This fixes up the
|
|
str r1, [r11], #4 @ C references.
|
|
cmp r11, r12
|
|
blo 1b
|
|
#endif
|
|
|
|
not_relocated: mov r0, #0
|
|
1: str r0, [r2], #4 @ clear bss
|
|
str r0, [r2], #4
|
|
str r0, [r2], #4
|
|
str r0, [r2], #4
|
|
cmp r2, r3
|
|
blo 1b
|
|
|
|
/*
|
|
* Did we skip the cache setup earlier?
|
|
* That is indicated by the LSB in r4.
|
|
* Do it now if so.
|
|
*/
|
|
tst r4, #1
|
|
bic r4, r4, #1
|
|
blne cache_on
|
|
|
|
/*
|
|
* The C runtime environment should now be setup sufficiently.
|
|
* Set up some pointers, and start decompressing.
|
|
* r4 = kernel execution address
|
|
* r7 = architecture ID
|
|
* r8 = atags pointer
|
|
*/
|
|
mov r0, r4
|
|
mov r1, sp @ malloc space above stack
|
|
add r2, sp, #0x10000 @ 64k max
|
|
mov r3, r7
|
|
bl decompress_kernel
|
|
bl cache_clean_flush
|
|
bl cache_off
|
|
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
mrs r0, spsr @ Get saved CPU boot mode
|
|
and r0, r0, #MODE_MASK
|
|
cmp r0, #HYP_MODE @ if not booted in HYP mode...
|
|
bne __enter_kernel @ boot kernel directly
|
|
|
|
adr r12, .L__hyp_reentry_vectors_offset
|
|
ldr r0, [r12]
|
|
add r0, r0, r12
|
|
|
|
bl __hyp_set_vectors
|
|
__HVC(0) @ otherwise bounce to hyp mode
|
|
|
|
b . @ should never be reached
|
|
|
|
.align 2
|
|
.L__hyp_reentry_vectors_offset: .long __hyp_reentry_vectors - .
|
|
#else
|
|
b __enter_kernel
|
|
#endif
|
|
|
|
.align 2
|
|
.type LC0, #object
|
|
LC0: .word LC0 @ r1
|
|
.word __bss_start @ r2
|
|
.word _end @ r3
|
|
.word _edata @ r6
|
|
.word input_data_end - 4 @ r10 (inflated size location)
|
|
.word _got_start @ r11
|
|
.word _got_end @ ip
|
|
.word .L_user_stack_end @ sp
|
|
.word _end - restart + 16384 + 1024*1024
|
|
.size LC0, . - LC0
|
|
|
|
#ifdef CONFIG_ARCH_RPC
|
|
.globl params
|
|
params: ldr r0, =0x10000100 @ params_phys for RPC
|
|
mov pc, lr
|
|
.ltorg
|
|
.align
|
|
#endif
|
|
|
|
/*
|
|
* Turn on the cache. We need to setup some page tables so that we
|
|
* can have both the I and D caches on.
|
|
*
|
|
* We place the page tables 16k down from the kernel execution address,
|
|
* and we hope that nothing else is using it. If we're using it, we
|
|
* will go pop!
|
|
*
|
|
* On entry,
|
|
* r4 = kernel execution address
|
|
* r7 = architecture number
|
|
* r8 = atags pointer
|
|
* On exit,
|
|
* r0, r1, r2, r3, r9, r10, r12 corrupted
|
|
* This routine must preserve:
|
|
* r4, r7, r8
|
|
*/
|
|
.align 5
|
|
cache_on: mov r3, #8 @ cache_on function
|
|
b call_cache_fn
|
|
|
|
/*
|
|
* Initialize the highest priority protection region, PR7
|
|
* to cover all 32bit address and cacheable and bufferable.
|
|
*/
|
|
__armv4_mpu_cache_on:
|
|
mov r0, #0x3f @ 4G, the whole
|
|
mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
|
|
mcr p15, 0, r0, c6, c7, 1
|
|
|
|
mov r0, #0x80 @ PR7
|
|
mcr p15, 0, r0, c2, c0, 0 @ D-cache on
|
|
mcr p15, 0, r0, c2, c0, 1 @ I-cache on
|
|
mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
|
|
|
|
mov r0, #0xc000
|
|
mcr p15, 0, r0, c5, c0, 1 @ I-access permission
|
|
mcr p15, 0, r0, c5, c0, 0 @ D-access permission
|
|
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
|
|
mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
@ ...I .... ..D. WC.M
|
|
orr r0, r0, #0x002d @ .... .... ..1. 11.1
|
|
orr r0, r0, #0x1000 @ ...1 .... .... ....
|
|
|
|
mcr p15, 0, r0, c1, c0, 0 @ write control reg
|
|
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
|
|
mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
|
|
mov pc, lr
|
|
|
|
__armv3_mpu_cache_on:
|
|
mov r0, #0x3f @ 4G, the whole
|
|
mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
|
|
|
|
mov r0, #0x80 @ PR7
|
|
mcr p15, 0, r0, c2, c0, 0 @ cache on
|
|
mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
|
|
|
|
mov r0, #0xc000
|
|
mcr p15, 0, r0, c5, c0, 0 @ access permission
|
|
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
|
|
/*
|
|
* ?? ARMv3 MMU does not allow reading the control register,
|
|
* does this really work on ARMv3 MPU?
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
@ .... .... .... WC.M
|
|
orr r0, r0, #0x000d @ .... .... .... 11.1
|
|
/* ?? this overwrites the value constructed above? */
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c1, c0, 0 @ write control reg
|
|
|
|
/* ?? invalidate for the second time? */
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
|
|
mov pc, lr
|
|
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
#define CB_BITS 0x08
|
|
#else
|
|
#define CB_BITS 0x0c
|
|
#endif
|
|
|
|
__setup_mmu: sub r3, r4, #16384 @ Page directory size
|
|
bic r3, r3, #0xff @ Align the pointer
|
|
bic r3, r3, #0x3f00
|
|
/*
|
|
* Initialise the page tables, turning on the cacheable and bufferable
|
|
* bits for the RAM area only.
|
|
*/
|
|
mov r0, r3
|
|
mov r9, r0, lsr #18
|
|
mov r9, r9, lsl #18 @ start of RAM
|
|
add r10, r9, #0x10000000 @ a reasonable RAM size
|
|
mov r1, #0x12 @ XN|U + section mapping
|
|
orr r1, r1, #3 << 10 @ AP=11
|
|
add r2, r3, #16384
|
|
1: cmp r1, r9 @ if virt > start of RAM
|
|
cmphs r10, r1 @ && end of RAM > virt
|
|
bic r1, r1, #0x1c @ clear XN|U + C + B
|
|
orrlo r1, r1, #0x10 @ Set XN|U for non-RAM
|
|
orrhs r1, r1, r6 @ set RAM section settings
|
|
str r1, [r0], #4 @ 1:1 mapping
|
|
add r1, r1, #1048576
|
|
teq r0, r2
|
|
bne 1b
|
|
/*
|
|
* If ever we are running from Flash, then we surely want the cache
|
|
* to be enabled also for our execution instance... We map 2MB of it
|
|
* so there is no map overlap problem for up to 1 MB compressed kernel.
|
|
* If the execution is in RAM then we would only be duplicating the above.
|
|
*/
|
|
orr r1, r6, #0x04 @ ensure B is set for this
|
|
orr r1, r1, #3 << 10
|
|
mov r2, pc
|
|
mov r2, r2, lsr #20
|
|
orr r1, r1, r2, lsl #20
|
|
add r0, r3, r2, lsl #2
|
|
str r1, [r0], #4
|
|
add r1, r1, #1048576
|
|
str r1, [r0]
|
|
mov pc, lr
|
|
ENDPROC(__setup_mmu)
|
|
|
|
@ Enable unaligned access on v6, to allow better code generation
|
|
@ for the decompressor C code:
|
|
__armv6_mmu_cache_on:
|
|
mrc p15, 0, r0, c1, c0, 0 @ read SCTLR
|
|
bic r0, r0, #2 @ A (no unaligned access fault)
|
|
orr r0, r0, #1 << 22 @ U (v6 unaligned access model)
|
|
mcr p15, 0, r0, c1, c0, 0 @ write SCTLR
|
|
b __armv4_mmu_cache_on
|
|
|
|
__arm926ejs_mmu_cache_on:
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
mov r0, #4 @ put dcache in WT mode
|
|
mcr p15, 7, r0, c15, c0, 0
|
|
#endif
|
|
|
|
__armv4_mmu_cache_on:
|
|
mov r12, lr
|
|
#ifdef CONFIG_MMU
|
|
mov r6, #CB_BITS | 0x12 @ U
|
|
bl __setup_mmu
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
|
|
orr r0, r0, #0x0030
|
|
ARM_BE8( orr r0, r0, #1 << 25 ) @ big-endian page tables
|
|
bl __common_mmu_cache_on
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
|
|
#endif
|
|
mov pc, r12
|
|
|
|
__armv7_mmu_cache_on:
|
|
mov r12, lr
|
|
#ifdef CONFIG_MMU
|
|
mrc p15, 0, r11, c0, c1, 4 @ read ID_MMFR0
|
|
tst r11, #0xf @ VMSA
|
|
movne r6, #CB_BITS | 0x02 @ !XN
|
|
blne __setup_mmu
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
tst r11, #0xf @ VMSA
|
|
mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
|
|
#endif
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
bic r0, r0, #1 << 28 @ clear SCTLR.TRE
|
|
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
|
|
orr r0, r0, #0x003c @ write buffer
|
|
bic r0, r0, #2 @ A (no unaligned access fault)
|
|
orr r0, r0, #1 << 22 @ U (v6 unaligned access model)
|
|
@ (needed for ARM1176)
|
|
#ifdef CONFIG_MMU
|
|
ARM_BE8( orr r0, r0, #1 << 25 ) @ big-endian page tables
|
|
mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg
|
|
orrne r0, r0, #1 @ MMU enabled
|
|
movne r1, #0xfffffffd @ domain 0 = client
|
|
bic r6, r6, #1 << 31 @ 32-bit translation system
|
|
bic r6, r6, #(7 << 0) | (1 << 4) @ use only ttbr0
|
|
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
|
|
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
|
|
mcrne p15, 0, r6, c2, c0, 2 @ load ttb control
|
|
#endif
|
|
mcr p15, 0, r0, c7, c5, 4 @ ISB
|
|
mcr p15, 0, r0, c1, c0, 0 @ load control register
|
|
mrc p15, 0, r0, c1, c0, 0 @ and read it back
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 4 @ ISB
|
|
mov pc, r12
|
|
|
|
__fa526_cache_on:
|
|
mov r12, lr
|
|
mov r6, #CB_BITS | 0x12 @ U
|
|
bl __setup_mmu
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 @ Invalidate whole cache
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush UTLB
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
orr r0, r0, #0x1000 @ I-cache enable
|
|
bl __common_mmu_cache_on
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush UTLB
|
|
mov pc, r12
|
|
|
|
__common_mmu_cache_on:
|
|
#ifndef CONFIG_THUMB2_KERNEL
|
|
#ifndef DEBUG
|
|
orr r0, r0, #0x000d @ Write buffer, mmu
|
|
#endif
|
|
mov r1, #-1
|
|
mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
|
|
mcr p15, 0, r1, c3, c0, 0 @ load domain access control
|
|
b 1f
|
|
.align 5 @ cache line aligned
|
|
1: mcr p15, 0, r0, c1, c0, 0 @ load control register
|
|
mrc p15, 0, r0, c1, c0, 0 @ and read it back to
|
|
sub pc, lr, r0, lsr #32 @ properly flush pipeline
|
|
#endif
|
|
|
|
#define PROC_ENTRY_SIZE (4*5)
|
|
|
|
/*
|
|
* Here follow the relocatable cache support functions for the
|
|
* various processors. This is a generic hook for locating an
|
|
* entry and jumping to an instruction at the specified offset
|
|
* from the start of the block. Please note this is all position
|
|
* independent code.
|
|
*
|
|
* r1 = corrupted
|
|
* r2 = corrupted
|
|
* r3 = block offset
|
|
* r9 = corrupted
|
|
* r12 = corrupted
|
|
*/
|
|
|
|
call_cache_fn: adr r12, proc_types
|
|
#ifdef CONFIG_CPU_CP15
|
|
mrc p15, 0, r9, c0, c0 @ get processor ID
|
|
#elif defined(CONFIG_CPU_V7M)
|
|
/*
|
|
* On v7-M the processor id is located in the V7M_SCB_CPUID
|
|
* register, but as cache handling is IMPLEMENTATION DEFINED on
|
|
* v7-M (if existant at all) we just return early here.
|
|
* If V7M_SCB_CPUID were used the cpu ID functions (i.e.
|
|
* __armv7_mmu_cache_{on,off,flush}) would be selected which
|
|
* use cp15 registers that are not implemented on v7-M.
|
|
*/
|
|
bx lr
|
|
#else
|
|
ldr r9, =CONFIG_PROCESSOR_ID
|
|
#endif
|
|
1: ldr r1, [r12, #0] @ get value
|
|
ldr r2, [r12, #4] @ get mask
|
|
eor r1, r1, r9 @ (real ^ match)
|
|
tst r1, r2 @ & mask
|
|
ARM( addeq pc, r12, r3 ) @ call cache function
|
|
THUMB( addeq r12, r3 )
|
|
THUMB( moveq pc, r12 ) @ call cache function
|
|
add r12, r12, #PROC_ENTRY_SIZE
|
|
b 1b
|
|
|
|
/*
|
|
* Table for cache operations. This is basically:
|
|
* - CPU ID match
|
|
* - CPU ID mask
|
|
* - 'cache on' method instruction
|
|
* - 'cache off' method instruction
|
|
* - 'cache flush' method instruction
|
|
*
|
|
* We match an entry using: ((real_id ^ match) & mask) == 0
|
|
*
|
|
* Writethrough caches generally only need 'on' and 'off'
|
|
* methods. Writeback caches _must_ have the flush method
|
|
* defined.
|
|
*/
|
|
.align 2
|
|
.type proc_types,#object
|
|
proc_types:
|
|
.word 0x41000000 @ old ARM ID
|
|
.word 0xff00f000
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
|
|
.word 0x41007000 @ ARM7/710
|
|
.word 0xfff8fe00
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
|
|
.word 0x41807200 @ ARM720T (writethrough)
|
|
.word 0xffffff00
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
|
|
.word 0x41007400 @ ARM74x
|
|
.word 0xff00ff00
|
|
W(b) __armv3_mpu_cache_on
|
|
W(b) __armv3_mpu_cache_off
|
|
W(b) __armv3_mpu_cache_flush
|
|
|
|
.word 0x41009400 @ ARM94x
|
|
.word 0xff00ff00
|
|
W(b) __armv4_mpu_cache_on
|
|
W(b) __armv4_mpu_cache_off
|
|
W(b) __armv4_mpu_cache_flush
|
|
|
|
.word 0x41069260 @ ARM926EJ-S (v5TEJ)
|
|
.word 0xff0ffff0
|
|
W(b) __arm926ejs_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv5tej_mmu_cache_flush
|
|
|
|
.word 0x00007000 @ ARM7 IDs
|
|
.word 0x0000f000
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
|
|
@ Everything from here on will be the new ID system.
|
|
|
|
.word 0x4401a100 @ sa110 / sa1100
|
|
.word 0xffffffe0
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv4_mmu_cache_flush
|
|
|
|
.word 0x6901b110 @ sa1110
|
|
.word 0xfffffff0
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv4_mmu_cache_flush
|
|
|
|
.word 0x56056900
|
|
.word 0xffffff00 @ PXA9xx
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv4_mmu_cache_flush
|
|
|
|
.word 0x56158000 @ PXA168
|
|
.word 0xfffff000
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv5tej_mmu_cache_flush
|
|
|
|
.word 0x56050000 @ Feroceon
|
|
.word 0xff0f0000
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv5tej_mmu_cache_flush
|
|
|
|
#ifdef CONFIG_CPU_FEROCEON_OLD_ID
|
|
/* this conflicts with the standard ARMv5TE entry */
|
|
.long 0x41009260 @ Old Feroceon
|
|
.long 0xff00fff0
|
|
b __armv4_mmu_cache_on
|
|
b __armv4_mmu_cache_off
|
|
b __armv5tej_mmu_cache_flush
|
|
#endif
|
|
|
|
.word 0x66015261 @ FA526
|
|
.word 0xff01fff1
|
|
W(b) __fa526_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __fa526_cache_flush
|
|
|
|
@ These match on the architecture ID
|
|
|
|
.word 0x00020000 @ ARMv4T
|
|
.word 0x000f0000
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv4_mmu_cache_flush
|
|
|
|
.word 0x00050000 @ ARMv5TE
|
|
.word 0x000f0000
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv4_mmu_cache_flush
|
|
|
|
.word 0x00060000 @ ARMv5TEJ
|
|
.word 0x000f0000
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv5tej_mmu_cache_flush
|
|
|
|
.word 0x0007b000 @ ARMv6
|
|
.word 0x000ff000
|
|
W(b) __armv6_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv6_mmu_cache_flush
|
|
|
|
.word 0x000f0000 @ new CPU Id
|
|
.word 0x000f0000
|
|
W(b) __armv7_mmu_cache_on
|
|
W(b) __armv7_mmu_cache_off
|
|
W(b) __armv7_mmu_cache_flush
|
|
|
|
.word 0 @ unrecognised type
|
|
.word 0
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
|
|
.size proc_types, . - proc_types
|
|
|
|
/*
|
|
* If you get a "non-constant expression in ".if" statement"
|
|
* error from the assembler on this line, check that you have
|
|
* not accidentally written a "b" instruction where you should
|
|
* have written W(b).
|
|
*/
|
|
.if (. - proc_types) % PROC_ENTRY_SIZE != 0
|
|
.error "The size of one or more proc_types entries is wrong."
|
|
.endif
|
|
|
|
/*
|
|
* Turn off the Cache and MMU. ARMv3 does not support
|
|
* reading the control register, but ARMv4 does.
|
|
*
|
|
* On exit,
|
|
* r0, r1, r2, r3, r9, r12 corrupted
|
|
* This routine must preserve:
|
|
* r4, r7, r8
|
|
*/
|
|
.align 5
|
|
cache_off: mov r3, #12 @ cache_off function
|
|
b call_cache_fn
|
|
|
|
__armv4_mpu_cache_off:
|
|
mrc p15, 0, r0, c1, c0
|
|
bic r0, r0, #0x000d
|
|
mcr p15, 0, r0, c1, c0 @ turn MPU and cache off
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
mcr p15, 0, r0, c7, c6, 0 @ flush D-Cache
|
|
mcr p15, 0, r0, c7, c5, 0 @ flush I-Cache
|
|
mov pc, lr
|
|
|
|
__armv3_mpu_cache_off:
|
|
mrc p15, 0, r0, c1, c0
|
|
bic r0, r0, #0x000d
|
|
mcr p15, 0, r0, c1, c0, 0 @ turn MPU and cache off
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
|
|
mov pc, lr
|
|
|
|
__armv4_mmu_cache_off:
|
|
#ifdef CONFIG_MMU
|
|
mrc p15, 0, r0, c1, c0
|
|
bic r0, r0, #0x000d
|
|
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7 @ invalidate whole cache v4
|
|
mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
|
|
#endif
|
|
mov pc, lr
|
|
|
|
__armv7_mmu_cache_off:
|
|
mrc p15, 0, r0, c1, c0
|
|
#ifdef CONFIG_MMU
|
|
bic r0, r0, #0x000d
|
|
#else
|
|
bic r0, r0, #0x000c
|
|
#endif
|
|
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
|
|
mov r12, lr
|
|
bl __armv7_mmu_cache_flush
|
|
mov r0, #0
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
|
|
#endif
|
|
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTC
|
|
mcr p15, 0, r0, c7, c10, 4 @ DSB
|
|
mcr p15, 0, r0, c7, c5, 4 @ ISB
|
|
mov pc, r12
|
|
|
|
/*
|
|
* Clean and flush the cache to maintain consistency.
|
|
*
|
|
* On exit,
|
|
* r1, r2, r3, r9, r10, r11, r12 corrupted
|
|
* This routine must preserve:
|
|
* r4, r6, r7, r8
|
|
*/
|
|
.align 5
|
|
cache_clean_flush:
|
|
mov r3, #16
|
|
b call_cache_fn
|
|
|
|
__armv4_mpu_cache_flush:
|
|
tst r4, #1
|
|
movne pc, lr
|
|
mov r2, #1
|
|
mov r3, #0
|
|
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
|
|
mov r1, #7 << 5 @ 8 segments
|
|
1: orr r3, r1, #63 << 26 @ 64 entries
|
|
2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
|
|
subs r3, r3, #1 << 26
|
|
bcs 2b @ entries 63 to 0
|
|
subs r1, r1, #1 << 5
|
|
bcs 1b @ segments 7 to 0
|
|
|
|
teq r2, #0
|
|
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__fa526_cache_flush:
|
|
tst r4, #1
|
|
movne pc, lr
|
|
mov r1, #0
|
|
mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache
|
|
mcr p15, 0, r1, c7, c5, 0 @ flush I cache
|
|
mcr p15, 0, r1, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__armv6_mmu_cache_flush:
|
|
mov r1, #0
|
|
tst r4, #1
|
|
mcreq p15, 0, r1, c7, c14, 0 @ clean+invalidate D
|
|
mcr p15, 0, r1, c7, c5, 0 @ invalidate I+BTB
|
|
mcreq p15, 0, r1, c7, c15, 0 @ clean+invalidate unified
|
|
mcr p15, 0, r1, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__armv7_mmu_cache_flush:
|
|
tst r4, #1
|
|
bne iflush
|
|
mrc p15, 0, r10, c0, c1, 5 @ read ID_MMFR1
|
|
tst r10, #0xf << 16 @ hierarchical cache (ARMv7)
|
|
mov r10, #0
|
|
beq hierarchical
|
|
mcr p15, 0, r10, c7, c14, 0 @ clean+invalidate D
|
|
b iflush
|
|
hierarchical:
|
|
mcr p15, 0, r10, c7, c10, 5 @ DMB
|
|
stmfd sp!, {r0-r7, r9-r11}
|
|
mrc p15, 1, r0, c0, c0, 1 @ read clidr
|
|
ands r3, r0, #0x7000000 @ extract loc from clidr
|
|
mov r3, r3, lsr #23 @ left align loc bit field
|
|
beq finished @ if loc is 0, then no need to clean
|
|
mov r10, #0 @ start clean at cache level 0
|
|
loop1:
|
|
add r2, r10, r10, lsr #1 @ work out 3x current cache level
|
|
mov r1, r0, lsr r2 @ extract cache type bits from clidr
|
|
and r1, r1, #7 @ mask of the bits for current cache only
|
|
cmp r1, #2 @ see what cache we have at this level
|
|
blt skip @ skip if no cache, or just i-cache
|
|
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
|
|
mcr p15, 0, r10, c7, c5, 4 @ isb to sych the new cssr&csidr
|
|
mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
|
|
and r2, r1, #7 @ extract the length of the cache lines
|
|
add r2, r2, #4 @ add 4 (line length offset)
|
|
ldr r4, =0x3ff
|
|
ands r4, r4, r1, lsr #3 @ find maximum number on the way size
|
|
clz r5, r4 @ find bit position of way size increment
|
|
ldr r7, =0x7fff
|
|
ands r7, r7, r1, lsr #13 @ extract max number of the index size
|
|
loop2:
|
|
mov r9, r4 @ create working copy of max way size
|
|
loop3:
|
|
ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11
|
|
ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11
|
|
THUMB( lsl r6, r9, r5 )
|
|
THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11
|
|
THUMB( lsl r6, r7, r2 )
|
|
THUMB( orr r11, r11, r6 ) @ factor index number into r11
|
|
mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
|
|
subs r9, r9, #1 @ decrement the way
|
|
bge loop3
|
|
subs r7, r7, #1 @ decrement the index
|
|
bge loop2
|
|
skip:
|
|
add r10, r10, #2 @ increment cache number
|
|
cmp r3, r10
|
|
bgt loop1
|
|
finished:
|
|
ldmfd sp!, {r0-r7, r9-r11}
|
|
mov r10, #0 @ switch back to cache level 0
|
|
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
|
|
iflush:
|
|
mcr p15, 0, r10, c7, c10, 4 @ DSB
|
|
mcr p15, 0, r10, c7, c5, 0 @ invalidate I+BTB
|
|
mcr p15, 0, r10, c7, c10, 4 @ DSB
|
|
mcr p15, 0, r10, c7, c5, 4 @ ISB
|
|
mov pc, lr
|
|
|
|
__armv5tej_mmu_cache_flush:
|
|
tst r4, #1
|
|
movne pc, lr
|
|
1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache
|
|
bne 1b
|
|
mcr p15, 0, r0, c7, c5, 0 @ flush I cache
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__armv4_mmu_cache_flush:
|
|
tst r4, #1
|
|
movne pc, lr
|
|
mov r2, #64*1024 @ default: 32K dcache size (*2)
|
|
mov r11, #32 @ default: 32 byte line size
|
|
mrc p15, 0, r3, c0, c0, 1 @ read cache type
|
|
teq r3, r9 @ cache ID register present?
|
|
beq no_cache_id
|
|
mov r1, r3, lsr #18
|
|
and r1, r1, #7
|
|
mov r2, #1024
|
|
mov r2, r2, lsl r1 @ base dcache size *2
|
|
tst r3, #1 << 14 @ test M bit
|
|
addne r2, r2, r2, lsr #1 @ +1/2 size if M == 1
|
|
mov r3, r3, lsr #12
|
|
and r3, r3, #3
|
|
mov r11, #8
|
|
mov r11, r11, lsl r3 @ cache line size in bytes
|
|
no_cache_id:
|
|
mov r1, pc
|
|
bic r1, r1, #63 @ align to longest cache line
|
|
add r2, r1, r2
|
|
1:
|
|
ARM( ldr r3, [r1], r11 ) @ s/w flush D cache
|
|
THUMB( ldr r3, [r1] ) @ s/w flush D cache
|
|
THUMB( add r1, r1, r11 )
|
|
teq r1, r2
|
|
bne 1b
|
|
|
|
mcr p15, 0, r1, c7, c5, 0 @ flush I cache
|
|
mcr p15, 0, r1, c7, c6, 0 @ flush D cache
|
|
mcr p15, 0, r1, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__armv3_mmu_cache_flush:
|
|
__armv3_mpu_cache_flush:
|
|
tst r4, #1
|
|
movne pc, lr
|
|
mov r1, #0
|
|
mcr p15, 0, r1, c7, c0, 0 @ invalidate whole cache v3
|
|
mov pc, lr
|
|
|
|
/*
|
|
* Various debugging routines for printing hex characters and
|
|
* memory, which again must be relocatable.
|
|
*/
|
|
#ifdef DEBUG
|
|
.align 2
|
|
.type phexbuf,#object
|
|
phexbuf: .space 12
|
|
.size phexbuf, . - phexbuf
|
|
|
|
@ phex corrupts {r0, r1, r2, r3}
|
|
phex: adr r3, phexbuf
|
|
mov r2, #0
|
|
strb r2, [r3, r1]
|
|
1: subs r1, r1, #1
|
|
movmi r0, r3
|
|
bmi puts
|
|
and r2, r0, #15
|
|
mov r0, r0, lsr #4
|
|
cmp r2, #10
|
|
addge r2, r2, #7
|
|
add r2, r2, #'0'
|
|
strb r2, [r3, r1]
|
|
b 1b
|
|
|
|
@ puts corrupts {r0, r1, r2, r3}
|
|
puts: loadsp r3, r2, r1
|
|
1: ldrb r2, [r0], #1
|
|
teq r2, #0
|
|
moveq pc, lr
|
|
2: writeb r2, r3
|
|
mov r1, #0x00020000
|
|
3: subs r1, r1, #1
|
|
bne 3b
|
|
teq r2, #'\n'
|
|
moveq r2, #'\r'
|
|
beq 2b
|
|
teq r0, #0
|
|
bne 1b
|
|
mov pc, lr
|
|
@ putc corrupts {r0, r1, r2, r3}
|
|
putc:
|
|
mov r2, r0
|
|
loadsp r3, r1, r0
|
|
mov r0, #0
|
|
b 2b
|
|
|
|
@ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
|
|
memdump: mov r12, r0
|
|
mov r10, lr
|
|
mov r11, #0
|
|
2: mov r0, r11, lsl #2
|
|
add r0, r0, r12
|
|
mov r1, #8
|
|
bl phex
|
|
mov r0, #':'
|
|
bl putc
|
|
1: mov r0, #' '
|
|
bl putc
|
|
ldr r0, [r12, r11, lsl #2]
|
|
mov r1, #8
|
|
bl phex
|
|
and r0, r11, #7
|
|
teq r0, #3
|
|
moveq r0, #' '
|
|
bleq putc
|
|
and r0, r11, #7
|
|
add r11, r11, #1
|
|
teq r0, #7
|
|
bne 1b
|
|
mov r0, #'\n'
|
|
bl putc
|
|
cmp r11, #64
|
|
blt 2b
|
|
mov pc, r10
|
|
#endif
|
|
|
|
.ltorg
|
|
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
.align 5
|
|
__hyp_reentry_vectors:
|
|
W(b) . @ reset
|
|
W(b) . @ undef
|
|
W(b) . @ svc
|
|
W(b) . @ pabort
|
|
W(b) . @ dabort
|
|
W(b) __enter_kernel @ hyp
|
|
W(b) . @ irq
|
|
W(b) . @ fiq
|
|
#endif /* CONFIG_ARM_VIRT_EXT */
|
|
|
|
__enter_kernel:
|
|
mov r0, #0 @ must be 0
|
|
mov r1, r7 @ restore architecture number
|
|
mov r2, r8 @ restore atags pointer
|
|
ARM( mov pc, r4 ) @ call kernel
|
|
M_CLASS( add r4, r4, #1 ) @ enter in Thumb mode for M class
|
|
THUMB( bx r4 ) @ entry point is always ARM for A/R classes
|
|
|
|
reloc_code_end:
|
|
|
|
#ifdef CONFIG_EFI_STUB
|
|
.align 2
|
|
_start: .long start - .
|
|
|
|
ENTRY(efi_stub_entry)
|
|
@ allocate space on stack for passing current zImage address
|
|
@ and for the EFI stub to return of new entry point of
|
|
@ zImage, as EFI stub may copy the kernel. Pointer address
|
|
@ is passed in r2. r0 and r1 are passed through from the
|
|
@ EFI firmware to efi_entry
|
|
adr ip, _start
|
|
ldr r3, [ip]
|
|
add r3, r3, ip
|
|
stmfd sp!, {r3, lr}
|
|
mov r2, sp @ pass zImage address in r2
|
|
bl efi_entry
|
|
|
|
@ Check for error return from EFI stub. r0 has FDT address
|
|
@ or error code.
|
|
cmn r0, #1
|
|
beq efi_load_fail
|
|
|
|
@ Preserve return value of efi_entry() in r4
|
|
mov r4, r0
|
|
|
|
@ our cache maintenance code relies on CP15 barrier instructions
|
|
@ but since we arrived here with the MMU and caches configured
|
|
@ by UEFI, we must check that the CP15BEN bit is set in SCTLR.
|
|
@ Note that this bit is RAO/WI on v6 and earlier, so the ISB in
|
|
@ the enable path will be executed on v7+ only.
|
|
mrc p15, 0, r1, c1, c0, 0 @ read SCTLR
|
|
tst r1, #(1 << 5) @ CP15BEN bit set?
|
|
bne 0f
|
|
orr r1, r1, #(1 << 5) @ CP15 barrier instructions
|
|
mcr p15, 0, r1, c1, c0, 0 @ write SCTLR
|
|
ARM( .inst 0xf57ff06f @ v7+ isb )
|
|
THUMB( isb )
|
|
|
|
0: bl cache_clean_flush
|
|
bl cache_off
|
|
|
|
@ Set parameters for booting zImage according to boot protocol
|
|
@ put FDT address in r2, it was returned by efi_entry()
|
|
@ r1 is the machine type, and r0 needs to be 0
|
|
mov r0, #0
|
|
mov r1, #0xFFFFFFFF
|
|
mov r2, r4
|
|
|
|
@ Branch to (possibly) relocated zImage that is in [sp]
|
|
ldr lr, [sp]
|
|
ldr ip, =start_offset
|
|
add lr, lr, ip
|
|
mov pc, lr @ no mode switch
|
|
|
|
efi_load_fail:
|
|
@ Return EFI_LOAD_ERROR to EFI firmware on error.
|
|
ldr r0, =0x80000001
|
|
ldmfd sp!, {ip, pc}
|
|
ENDPROC(efi_stub_entry)
|
|
#endif
|
|
|
|
.align
|
|
.section ".stack", "aw", %nobits
|
|
.L_user_stack: .space 4096
|
|
.L_user_stack_end:
|