mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 02:15:21 +07:00
294840feef
Add support for the AHCI-compliant Serial ATA host controller on the Tegra210 system-on-chip. Signed-off-by: Preetham Chandru R <pchandru@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
597 lines
18 KiB
C
597 lines
18 KiB
C
/*
|
|
* drivers/ata/ahci_tegra.c
|
|
*
|
|
* Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* Author:
|
|
* Mikko Perttunen <mperttunen@nvidia.com>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/ahci_platform.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
|
|
#include <soc/tegra/fuse.h>
|
|
#include <soc/tegra/pmc.h>
|
|
|
|
#include "ahci.h"
|
|
|
|
#define DRV_NAME "tegra-ahci"
|
|
|
|
#define SATA_CONFIGURATION_0 0x180
|
|
#define SATA_CONFIGURATION_0_EN_FPCI BIT(0)
|
|
#define SATA_CONFIGURATION_0_CLK_OVERRIDE BIT(31)
|
|
|
|
#define SCFG_OFFSET 0x1000
|
|
|
|
#define T_SATA0_CFG_1 0x04
|
|
#define T_SATA0_CFG_1_IO_SPACE BIT(0)
|
|
#define T_SATA0_CFG_1_MEMORY_SPACE BIT(1)
|
|
#define T_SATA0_CFG_1_BUS_MASTER BIT(2)
|
|
#define T_SATA0_CFG_1_SERR BIT(8)
|
|
|
|
#define T_SATA0_CFG_9 0x24
|
|
#define T_SATA0_CFG_9_BASE_ADDRESS 0x40020000
|
|
|
|
#define SATA_FPCI_BAR5 0x94
|
|
#define SATA_FPCI_BAR5_START_MASK (0xfffffff << 4)
|
|
#define SATA_FPCI_BAR5_START (0x0040020 << 4)
|
|
#define SATA_FPCI_BAR5_ACCESS_TYPE (0x1)
|
|
|
|
#define SATA_INTR_MASK 0x188
|
|
#define SATA_INTR_MASK_IP_INT_MASK BIT(16)
|
|
|
|
#define T_SATA0_CFG_35 0x94
|
|
#define T_SATA0_CFG_35_IDP_INDEX_MASK (0x7ff << 2)
|
|
#define T_SATA0_CFG_35_IDP_INDEX (0x2a << 2)
|
|
|
|
#define T_SATA0_AHCI_IDP1 0x98
|
|
#define T_SATA0_AHCI_IDP1_DATA (0x400040)
|
|
|
|
#define T_SATA0_CFG_PHY_1 0x12c
|
|
#define T_SATA0_CFG_PHY_1_PADS_IDDQ_EN BIT(23)
|
|
#define T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN BIT(22)
|
|
|
|
#define T_SATA0_NVOOB 0x114
|
|
#define T_SATA0_NVOOB_COMMA_CNT_MASK (0xff << 16)
|
|
#define T_SATA0_NVOOB_COMMA_CNT (0x07 << 16)
|
|
#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK (0x3 << 24)
|
|
#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE (0x1 << 24)
|
|
#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK (0x3 << 26)
|
|
#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH (0x3 << 26)
|
|
|
|
#define T_SATA_CFG_PHY_0 0x120
|
|
#define T_SATA_CFG_PHY_0_USE_7BIT_ALIGN_DET_FOR_SPD BIT(11)
|
|
#define T_SATA_CFG_PHY_0_MASK_SQUELCH BIT(24)
|
|
|
|
#define T_SATA0_CFG2NVOOB_2 0x134
|
|
#define T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW_MASK (0x1ff << 18)
|
|
#define T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW (0xc << 18)
|
|
|
|
#define T_SATA0_AHCI_HBA_CAP_BKDR 0x300
|
|
#define T_SATA0_AHCI_HBA_CAP_BKDR_PARTIAL_ST_CAP BIT(13)
|
|
#define T_SATA0_AHCI_HBA_CAP_BKDR_SLUMBER_ST_CAP BIT(14)
|
|
#define T_SATA0_AHCI_HBA_CAP_BKDR_SALP BIT(26)
|
|
#define T_SATA0_AHCI_HBA_CAP_BKDR_SUPP_PM BIT(17)
|
|
#define T_SATA0_AHCI_HBA_CAP_BKDR_SNCQ BIT(30)
|
|
|
|
#define T_SATA0_BKDOOR_CC 0x4a4
|
|
#define T_SATA0_BKDOOR_CC_CLASS_CODE_MASK (0xffff << 16)
|
|
#define T_SATA0_BKDOOR_CC_CLASS_CODE (0x0106 << 16)
|
|
#define T_SATA0_BKDOOR_CC_PROG_IF_MASK (0xff << 8)
|
|
#define T_SATA0_BKDOOR_CC_PROG_IF (0x01 << 8)
|
|
|
|
#define T_SATA0_CFG_SATA 0x54c
|
|
#define T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN BIT(12)
|
|
|
|
#define T_SATA0_CFG_MISC 0x550
|
|
|
|
#define T_SATA0_INDEX 0x680
|
|
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN1 0x690
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK 0xff
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT 0
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK (0xff << 8)
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT 8
|
|
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN2 0x694
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK 0xff
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_SHIFT 0
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK (0xff << 12)
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_SHIFT 12
|
|
|
|
#define T_SATA0_CHX_PHY_CTRL2 0x69c
|
|
#define T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1 0x23
|
|
|
|
#define T_SATA0_CHX_PHY_CTRL11 0x6d0
|
|
#define T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ (0x2800 << 16)
|
|
|
|
#define T_SATA0_CHX_PHY_CTRL17_0 0x6e8
|
|
#define T_SATA0_CHX_PHY_CTRL17_0_RX_EQ_CTRL_L_GEN1 0x55010000
|
|
#define T_SATA0_CHX_PHY_CTRL18_0 0x6ec
|
|
#define T_SATA0_CHX_PHY_CTRL18_0_RX_EQ_CTRL_L_GEN2 0x55010000
|
|
#define T_SATA0_CHX_PHY_CTRL20_0 0x6f4
|
|
#define T_SATA0_CHX_PHY_CTRL20_0_RX_EQ_CTRL_H_GEN1 0x1
|
|
#define T_SATA0_CHX_PHY_CTRL21_0 0x6f8
|
|
#define T_SATA0_CHX_PHY_CTRL21_0_RX_EQ_CTRL_H_GEN2 0x1
|
|
|
|
/* AUX Registers */
|
|
#define SATA_AUX_MISC_CNTL_1_0 0x8
|
|
#define SATA_AUX_MISC_CNTL_1_0_DEVSLP_OVERRIDE BIT(17)
|
|
#define SATA_AUX_MISC_CNTL_1_0_SDS_SUPPORT BIT(13)
|
|
#define SATA_AUX_MISC_CNTL_1_0_DESO_SUPPORT BIT(15)
|
|
|
|
#define SATA_AUX_RX_STAT_INT_0 0xc
|
|
#define SATA_AUX_RX_STAT_INT_0_SATA_DEVSLP BIT(7)
|
|
|
|
#define SATA_AUX_SPARE_CFG0_0 0x18
|
|
#define SATA_AUX_SPARE_CFG0_0_MDAT_TIMER_AFTER_PG_VALID BIT(14)
|
|
|
|
#define FUSE_SATA_CALIB 0x124
|
|
#define FUSE_SATA_CALIB_MASK 0x3
|
|
|
|
struct sata_pad_calibration {
|
|
u8 gen1_tx_amp;
|
|
u8 gen1_tx_peak;
|
|
u8 gen2_tx_amp;
|
|
u8 gen2_tx_peak;
|
|
};
|
|
|
|
static const struct sata_pad_calibration tegra124_pad_calibration[] = {
|
|
{0x18, 0x04, 0x18, 0x0a},
|
|
{0x0e, 0x04, 0x14, 0x0a},
|
|
{0x0e, 0x07, 0x1a, 0x0e},
|
|
{0x14, 0x0e, 0x1a, 0x0e},
|
|
};
|
|
|
|
struct tegra_ahci_ops {
|
|
int (*init)(struct ahci_host_priv *hpriv);
|
|
};
|
|
|
|
struct tegra_ahci_soc {
|
|
const char *const *supply_names;
|
|
u32 num_supplies;
|
|
bool supports_devslp;
|
|
const struct tegra_ahci_ops *ops;
|
|
};
|
|
|
|
struct tegra_ahci_priv {
|
|
struct platform_device *pdev;
|
|
void __iomem *sata_regs;
|
|
void __iomem *sata_aux_regs;
|
|
struct reset_control *sata_rst;
|
|
struct reset_control *sata_oob_rst;
|
|
struct reset_control *sata_cold_rst;
|
|
/* Needs special handling, cannot use ahci_platform */
|
|
struct clk *sata_clk;
|
|
struct regulator_bulk_data *supplies;
|
|
const struct tegra_ahci_soc *soc;
|
|
};
|
|
|
|
static void tegra_ahci_handle_quirks(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
|
u32 val;
|
|
|
|
if (tegra->sata_aux_regs && !tegra->soc->supports_devslp) {
|
|
val = readl(tegra->sata_aux_regs + SATA_AUX_MISC_CNTL_1_0);
|
|
val &= ~SATA_AUX_MISC_CNTL_1_0_SDS_SUPPORT;
|
|
writel(val, tegra->sata_aux_regs + SATA_AUX_MISC_CNTL_1_0);
|
|
}
|
|
}
|
|
|
|
static int tegra124_ahci_init(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
|
struct sata_pad_calibration calib;
|
|
int ret;
|
|
u32 val;
|
|
|
|
/* Pad calibration */
|
|
ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
|
|
|
|
writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
|
|
|
|
val = readl(tegra->sata_regs +
|
|
SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
|
|
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
|
|
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
|
|
val |= calib.gen1_tx_amp << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
|
|
val |= calib.gen1_tx_peak << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET +
|
|
T_SATA0_CHX_PHY_CTRL1_GEN1);
|
|
|
|
val = readl(tegra->sata_regs +
|
|
SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
|
|
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
|
|
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
|
|
val |= calib.gen2_tx_amp << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
|
|
val |= calib.gen2_tx_peak << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET +
|
|
T_SATA0_CHX_PHY_CTRL1_GEN2);
|
|
|
|
writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
|
|
tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
|
|
writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
|
|
tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
|
|
|
|
writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(tegra->soc->num_supplies,
|
|
tegra->supplies);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_SATA,
|
|
tegra->sata_clk,
|
|
tegra->sata_rst);
|
|
if (ret)
|
|
goto disable_regulators;
|
|
|
|
reset_control_assert(tegra->sata_oob_rst);
|
|
reset_control_assert(tegra->sata_cold_rst);
|
|
|
|
ret = ahci_platform_enable_resources(hpriv);
|
|
if (ret)
|
|
goto disable_power;
|
|
|
|
reset_control_deassert(tegra->sata_cold_rst);
|
|
reset_control_deassert(tegra->sata_oob_rst);
|
|
|
|
return 0;
|
|
|
|
disable_power:
|
|
clk_disable_unprepare(tegra->sata_clk);
|
|
|
|
tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
|
|
|
|
disable_regulators:
|
|
regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tegra_ahci_power_off(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
|
|
|
ahci_platform_disable_resources(hpriv);
|
|
|
|
reset_control_assert(tegra->sata_rst);
|
|
reset_control_assert(tegra->sata_oob_rst);
|
|
reset_control_assert(tegra->sata_cold_rst);
|
|
|
|
clk_disable_unprepare(tegra->sata_clk);
|
|
tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
|
|
|
|
regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
|
|
}
|
|
|
|
static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = tegra_ahci_power_on(hpriv);
|
|
if (ret) {
|
|
dev_err(&tegra->pdev->dev,
|
|
"failed to power on AHCI controller: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Program the following SATA IPFS registers to allow SW accesses to
|
|
* SATA's MMIO register range.
|
|
*/
|
|
val = readl(tegra->sata_regs + SATA_FPCI_BAR5);
|
|
val &= ~(SATA_FPCI_BAR5_START_MASK | SATA_FPCI_BAR5_ACCESS_TYPE);
|
|
val |= SATA_FPCI_BAR5_START | SATA_FPCI_BAR5_ACCESS_TYPE;
|
|
writel(val, tegra->sata_regs + SATA_FPCI_BAR5);
|
|
|
|
/* Program the following SATA IPFS register to enable the SATA */
|
|
val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
|
|
val |= SATA_CONFIGURATION_0_EN_FPCI;
|
|
writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
|
|
|
|
/* Electrical settings for better link stability */
|
|
val = T_SATA0_CHX_PHY_CTRL17_0_RX_EQ_CTRL_L_GEN1;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL17_0);
|
|
val = T_SATA0_CHX_PHY_CTRL18_0_RX_EQ_CTRL_L_GEN2;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL18_0);
|
|
val = T_SATA0_CHX_PHY_CTRL20_0_RX_EQ_CTRL_H_GEN1;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL20_0);
|
|
val = T_SATA0_CHX_PHY_CTRL21_0_RX_EQ_CTRL_H_GEN2;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL21_0);
|
|
|
|
/* For SQUELCH Filter & Gen3 drive getting detected as Gen1 drive */
|
|
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0);
|
|
val |= T_SATA_CFG_PHY_0_MASK_SQUELCH;
|
|
val &= ~T_SATA_CFG_PHY_0_USE_7BIT_ALIGN_DET_FOR_SPD;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0);
|
|
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB);
|
|
val &= ~(T_SATA0_NVOOB_COMMA_CNT_MASK |
|
|
T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK |
|
|
T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK);
|
|
val |= (T_SATA0_NVOOB_COMMA_CNT |
|
|
T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH |
|
|
T_SATA0_NVOOB_SQUELCH_FILTER_MODE);
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB);
|
|
|
|
/*
|
|
* Change CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW from 83.3 ns to 58.8ns
|
|
*/
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG2NVOOB_2);
|
|
val &= ~T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW_MASK;
|
|
val |= T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG2NVOOB_2);
|
|
|
|
if (tegra->soc->ops && tegra->soc->ops->init)
|
|
tegra->soc->ops->init(hpriv);
|
|
|
|
/*
|
|
* Program the following SATA configuration registers to
|
|
* initialize SATA
|
|
*/
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
|
|
val |= (T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
|
|
T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR);
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
|
|
val = T_SATA0_CFG_9_BASE_ADDRESS;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
|
|
|
|
/* Program Class Code and Programming interface for SATA */
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
|
val |= T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
|
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
|
|
val &=
|
|
~(T_SATA0_BKDOOR_CC_CLASS_CODE_MASK |
|
|
T_SATA0_BKDOOR_CC_PROG_IF_MASK);
|
|
val |= T_SATA0_BKDOOR_CC_CLASS_CODE | T_SATA0_BKDOOR_CC_PROG_IF;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
|
|
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
|
val &= ~T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
|
|
|
/* Enabling LPM capabilities through Backdoor Programming */
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_HBA_CAP_BKDR);
|
|
val |= (T_SATA0_AHCI_HBA_CAP_BKDR_PARTIAL_ST_CAP |
|
|
T_SATA0_AHCI_HBA_CAP_BKDR_SLUMBER_ST_CAP |
|
|
T_SATA0_AHCI_HBA_CAP_BKDR_SALP |
|
|
T_SATA0_AHCI_HBA_CAP_BKDR_SUPP_PM);
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_HBA_CAP_BKDR);
|
|
|
|
/* SATA Second Level Clock Gating configuration
|
|
* Enabling Gating of Tx/Rx clocks and driving Pad IDDQ and Lane
|
|
* IDDQ Signals
|
|
*/
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_35);
|
|
val &= ~T_SATA0_CFG_35_IDP_INDEX_MASK;
|
|
val |= T_SATA0_CFG_35_IDP_INDEX;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_35);
|
|
|
|
val = T_SATA0_AHCI_IDP1_DATA;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_IDP1);
|
|
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_PHY_1);
|
|
val |= (T_SATA0_CFG_PHY_1_PADS_IDDQ_EN |
|
|
T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN);
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_PHY_1);
|
|
|
|
/* Enabling IPFS Clock Gating */
|
|
val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
|
|
val &= ~SATA_CONFIGURATION_0_CLK_OVERRIDE;
|
|
writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
|
|
|
|
tegra_ahci_handle_quirks(hpriv);
|
|
|
|
/* Unmask SATA interrupts */
|
|
|
|
val = readl(tegra->sata_regs + SATA_INTR_MASK);
|
|
val |= SATA_INTR_MASK_IP_INT_MASK;
|
|
writel(val, tegra->sata_regs + SATA_INTR_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_ahci_controller_deinit(struct ahci_host_priv *hpriv)
|
|
{
|
|
tegra_ahci_power_off(hpriv);
|
|
}
|
|
|
|
static void tegra_ahci_host_stop(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
|
|
tegra_ahci_controller_deinit(hpriv);
|
|
}
|
|
|
|
static struct ata_port_operations ahci_tegra_port_ops = {
|
|
.inherits = &ahci_ops,
|
|
.host_stop = tegra_ahci_host_stop,
|
|
};
|
|
|
|
static const struct ata_port_info ahci_tegra_port_info = {
|
|
.flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_tegra_port_ops,
|
|
};
|
|
|
|
static const char *const tegra124_supply_names[] = {
|
|
"avdd", "hvdd", "vddio", "target-5v", "target-12v"
|
|
};
|
|
|
|
static const struct tegra_ahci_ops tegra124_ahci_ops = {
|
|
.init = tegra124_ahci_init,
|
|
};
|
|
|
|
static const struct tegra_ahci_soc tegra124_ahci_soc = {
|
|
.supply_names = tegra124_supply_names,
|
|
.num_supplies = ARRAY_SIZE(tegra124_supply_names),
|
|
.supports_devslp = false,
|
|
.ops = &tegra124_ahci_ops,
|
|
};
|
|
|
|
static const struct tegra_ahci_soc tegra210_ahci_soc = {
|
|
.supports_devslp = false,
|
|
};
|
|
|
|
static const struct of_device_id tegra_ahci_of_match[] = {
|
|
{
|
|
.compatible = "nvidia,tegra124-ahci",
|
|
.data = &tegra124_ahci_soc
|
|
},
|
|
{
|
|
.compatible = "nvidia,tegra210-ahci",
|
|
.data = &tegra210_ahci_soc
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
|
|
|
|
static struct scsi_host_template ahci_platform_sht = {
|
|
AHCI_SHT(DRV_NAME),
|
|
};
|
|
|
|
static int tegra_ahci_probe(struct platform_device *pdev)
|
|
{
|
|
struct ahci_host_priv *hpriv;
|
|
struct tegra_ahci_priv *tegra;
|
|
struct resource *res;
|
|
int ret;
|
|
unsigned int i;
|
|
|
|
hpriv = ahci_platform_get_resources(pdev);
|
|
if (IS_ERR(hpriv))
|
|
return PTR_ERR(hpriv);
|
|
|
|
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
|
|
if (!tegra)
|
|
return -ENOMEM;
|
|
|
|
hpriv->plat_data = tegra;
|
|
|
|
tegra->pdev = pdev;
|
|
tegra->soc = of_device_get_match_data(&pdev->dev);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(tegra->sata_regs))
|
|
return PTR_ERR(tegra->sata_regs);
|
|
|
|
/*
|
|
* AUX registers is optional.
|
|
*/
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
|
|
if (res) {
|
|
tegra->sata_aux_regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(tegra->sata_aux_regs))
|
|
return PTR_ERR(tegra->sata_aux_regs);
|
|
}
|
|
|
|
tegra->sata_rst = devm_reset_control_get(&pdev->dev, "sata");
|
|
if (IS_ERR(tegra->sata_rst)) {
|
|
dev_err(&pdev->dev, "Failed to get sata reset\n");
|
|
return PTR_ERR(tegra->sata_rst);
|
|
}
|
|
|
|
tegra->sata_oob_rst = devm_reset_control_get(&pdev->dev, "sata-oob");
|
|
if (IS_ERR(tegra->sata_oob_rst)) {
|
|
dev_err(&pdev->dev, "Failed to get sata-oob reset\n");
|
|
return PTR_ERR(tegra->sata_oob_rst);
|
|
}
|
|
|
|
tegra->sata_cold_rst = devm_reset_control_get(&pdev->dev, "sata-cold");
|
|
if (IS_ERR(tegra->sata_cold_rst)) {
|
|
dev_err(&pdev->dev, "Failed to get sata-cold reset\n");
|
|
return PTR_ERR(tegra->sata_cold_rst);
|
|
}
|
|
|
|
tegra->sata_clk = devm_clk_get(&pdev->dev, "sata");
|
|
if (IS_ERR(tegra->sata_clk)) {
|
|
dev_err(&pdev->dev, "Failed to get sata clock\n");
|
|
return PTR_ERR(tegra->sata_clk);
|
|
}
|
|
|
|
tegra->supplies = devm_kcalloc(&pdev->dev,
|
|
tegra->soc->num_supplies,
|
|
sizeof(*tegra->supplies), GFP_KERNEL);
|
|
if (!tegra->supplies)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < tegra->soc->num_supplies; i++)
|
|
tegra->supplies[i].supply = tegra->soc->supply_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(&pdev->dev,
|
|
tegra->soc->num_supplies,
|
|
tegra->supplies);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to get regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = tegra_ahci_controller_init(hpriv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ahci_platform_init_host(pdev, hpriv, &ahci_tegra_port_info,
|
|
&ahci_platform_sht);
|
|
if (ret)
|
|
goto deinit_controller;
|
|
|
|
return 0;
|
|
|
|
deinit_controller:
|
|
tegra_ahci_controller_deinit(hpriv);
|
|
|
|
return ret;
|
|
};
|
|
|
|
static struct platform_driver tegra_ahci_driver = {
|
|
.probe = tegra_ahci_probe,
|
|
.remove = ata_platform_remove_one,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = tegra_ahci_of_match,
|
|
},
|
|
/* LP0 suspend support not implemented */
|
|
};
|
|
module_platform_driver(tegra_ahci_driver);
|
|
|
|
MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
|
|
MODULE_DESCRIPTION("Tegra AHCI SATA driver");
|
|
MODULE_LICENSE("GPL v2");
|