mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 03:15:23 +07:00
21bdbb7102
Adds perf events support for L2 cache PMU. The L2 cache PMU driver is named 'l2cache_0' and can be used with perf events to profile L2 events such as cache hits and misses on Qualcomm Technologies processors. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Neil Leeder <nleeder@codeaurora.org> [will: minimise nesting in l2_cache_associate_cpu_with_cluster] [will: use kstrtoul for unsigned long, remove redunant .owner setting] Signed-off-by: Will Deacon <will.deacon@arm.com>
39 lines
1.6 KiB
Plaintext
39 lines
1.6 KiB
Plaintext
Qualcomm Technologies Level-2 Cache Performance Monitoring Unit (PMU)
|
|
=====================================================================
|
|
|
|
This driver supports the L2 cache clusters found in Qualcomm Technologies
|
|
Centriq SoCs. There are multiple physical L2 cache clusters, each with their
|
|
own PMU. Each cluster has one or more CPUs associated with it.
|
|
|
|
There is one logical L2 PMU exposed, which aggregates the results from
|
|
the physical PMUs.
|
|
|
|
The driver provides a description of its available events and configuration
|
|
options in sysfs, see /sys/devices/l2cache_0.
|
|
|
|
The "format" directory describes the format of the events.
|
|
|
|
Events can be envisioned as a 2-dimensional array. Each column represents
|
|
a group of events. There are 8 groups. Only one entry from each
|
|
group can be in use at a time. If multiple events from the same group
|
|
are specified, the conflicting events cannot be counted at the same time.
|
|
|
|
Events are specified as 0xCCG, where CC is 2 hex digits specifying
|
|
the code (array row) and G specifies the group (column) 0-7.
|
|
|
|
In addition there is a cycle counter event specified by the value 0xFE
|
|
which is outside the above scheme.
|
|
|
|
The driver provides a "cpumask" sysfs attribute which contains a mask
|
|
consisting of one CPU per cluster which will be used to handle all the PMU
|
|
events on that cluster.
|
|
|
|
Examples for use with perf:
|
|
|
|
perf stat -e l2cache_0/config=0x001/,l2cache_0/config=0x042/ -a sleep 1
|
|
|
|
perf stat -e l2cache_0/config=0xfe/ -C 2 sleep 1
|
|
|
|
The driver does not support sampling, therefore "perf record" will
|
|
not work. Per-task perf sessions are not supported.
|