linux_dsm_epyc7002/drivers/tty/serial
Timur Tabi e53e597fd4 tty: pl011: fix earlycon work-around for QDF2400 erratum 44
The work-around for the Qualcomm Datacenter Technologies QDF2400
erratum 44 sets the "qdf2400_e44_present" global variable if the
work-around is needed.  However, this check does not happen until after
earlycon is initialized, which means the work-around is not
used, and the console hangs as soon as it displays one character.

Fixes: d8a4995bce ("tty: pl011: Work around QDF2400 E44 stuck BUSY bit")
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-01 11:07:29 +02:00
..
8250 serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text 2017-03-31 17:26:20 +02:00
cpm_uart tty: serial: cpm_uart: make use of for_each_node_by_type() 2017-02-03 10:12:16 +01:00
jsm tty: serial: jsm_tty: constify uart_ops structures 2016-09-02 15:01:16 +02:00
21285.c
altera_jtaguart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
altera_uart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
amba-pl010.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
amba-pl011.c tty: pl011: fix earlycon work-around for QDF2400 erratum 44 2017-04-01 11:07:29 +02:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
arc_uart.c serial/arc: constify uart_ops structures 2016-09-01 21:05:41 +02:00
atmel_serial.c tty/serial: atmel: fix TX path in atmel_console_write() 2017-03-31 17:26:20 +02:00
bcm63xx_uart.c serial/bcm63xx_uart: constify uart_ops structures 2016-09-02 15:01:16 +02:00
bfin_sport_uart.c tty: serial: constify dev_pm_ops structures 2017-01-19 14:20:23 +01:00
bfin_sport_uart.h
bfin_uart.c
clps711x.c serial: clps711x: Changing the compatibility string to match with the smallest supported chip 2016-07-06 17:38:16 +02:00
crisv10.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
crisv10.h
digicolor-usart.c
dz.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
dz.h
earlycon-arm-semihost.c tty/serial: mark __init early_smh_setup() static 2016-09-02 15:03:35 +02:00
earlycon.c ACPI: parse SPCR and enable matching console 2016-09-28 17:46:46 +02:00
efm32-uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
etraxfs-uart.c
fsl_lpuart.c tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock 2017-01-12 11:51:24 +01:00
icom.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
icom.h
ifx6x60.c serial: ifx6x60: Free memory when probe fails 2016-11-10 14:50:46 +01:00
ifx6x60.h
imx.c serial: imx: Fix the CTS_B polarity in RS485 mode 2017-01-31 10:54:58 +01:00
ioc3_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
ioc4_serial.c scripts/spelling.txt: add "comsume(r)" pattern and fix typo instances 2017-02-27 18:43:47 -08:00
ip22zilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
ip22zilog.h
Kconfig tty: serial: lantiq: implement earlycon support 2017-01-12 11:51:24 +01:00
kgdb_nmi.c
kgdboc.c
lantiq.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
lpc32xx_hs.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
m32r_sio_reg.h
m32r_sio.c serial: m32r_sio: make it explicitly non-modular 2016-06-25 14:00:06 -07:00
Makefile tty: serial: Makefile: move kgdb to be initialized last 2016-10-27 16:27:24 +02:00
max310x.c serial: max310x: Add support for newer silicon revisions 2017-01-12 11:51:24 +01:00
max3100.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
mcf.c
men_z135_uart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
meson_uart.c tty: serial: meson: allow baud-rates higher than 115200 2017-01-19 14:38:57 +01:00
mpc52xx_uart.c
mps2-uart.c serial: mps2-uart: make driver explicitly non-modular 2016-06-25 14:01:57 -07:00
mpsc.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
msm_serial.c tty: serial: msm: Fix module autoload 2017-01-12 11:51:25 +01:00
mux.c
mvebu-uart.c serial: mvebu-uart: free the IRQ in ->shutdown() 2016-06-25 14:00:06 -07:00
mxs-auart.c serial: mxs-auart: Fix baudrate calculation 2017-03-31 17:26:19 +02:00
netx-serial.c
omap-serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pch_uart.c serial: pch_uart: add terminate entry for dmi_system_id tables 2016-10-27 16:01:31 +02:00
pic32_uart.c serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy 2017-01-12 11:51:24 +01:00
pic32_uart.h serial: pic32_uart: Add PIC32 UART driver 2016-05-13 14:01:56 +02:00
pmac_zilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pmac_zilog.h
pnx8xxx_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pxa.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
rp2.c
sa1100.c
samsung.c serial: samsung: Continue to work if DMA request fails 2017-03-07 19:58:37 +01:00
samsung.h serial: samsung: Simplify DMA engine initialization code 2017-01-12 11:51:24 +01:00
sb1250-duart.c
sc16is7xx.c sched/headers: Prepare for new header dependencies before moving code to <uapi/linux/sched/types.h> 2017-03-02 08:42:27 +01:00
sccnxp.c
serial_core.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
serial_ks8695.c
serial_mctrl_gpio.c serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct 2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h serial: mctrl_gpio: add modem control read routine 2016-06-25 14:30:42 -07:00
serial_txx9.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
serial-tegra.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sh-sci.c serial: sh-sci: fix hardware RX trigger level setting 2017-02-10 15:10:16 +01:00
sh-sci.h serial: sh-sci: consider DR (data ready) bit adequately 2017-02-03 10:14:10 +01:00
sirfsoc_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sirfsoc_uart.h serial: sirf: make fifo functions static 2016-06-25 14:01:57 -07:00
sn_console.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sprd_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
st-asc.c serial: st-asc: Use new GPIOD API to obtain RTS pin 2017-03-14 10:36:41 +01:00
stm32-usart.c serial: stm32: mark symbols static where possible 2016-09-27 12:55:27 +02:00
stm32-usart.h serial: stm32: Fix comparisons with undefined register 2016-10-27 16:00:31 +02:00
suncore.c
sunhv.c sparc64: Send break twice from console to return to boot prom 2017-02-23 08:27:24 -08:00
sunsab.c
sunsab.h
sunsu.c serial: sunsu: Free memory when probe fails 2016-11-16 10:57:26 +01:00
sunzilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sunzilog.h
tilegx.c
timbuart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c serial-uartlite: constify uart_ops structures 2016-09-02 15:01:16 +02:00
ucc_uart.c QE-UART: add "fsl,t1040-ucc-uart" to of_device_id 2016-05-01 13:55:12 -07:00
vr41xx_siu.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
vt8500_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
xilinx_uartps.c serial: xuartps: Enable uart loopback mode 2017-01-25 11:08:30 +01:00
zs.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
zs.h