AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-25 21:25:33 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
022dacdd27
linux_dsm_epyc7002/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
Jonas Karlman 4f510aa104 phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz 
Commit 287422a95f ("drm/rockchip: Round up _before_ giving to the clock framework")
changed what rate clk_round_rate() is called with, an additional 999 Hz
added to the requsted mode clock. This has caused a regression on RK3328
and presumably also on RK3228 because the inno-hdmi-phy clock requires an
exact match of the requested rate in the pre pll config table.

When an exact match is not found the parent clock rate (24MHz) is returned
to the clk_round_rate() caller. This cause wrong pixel clock to be used and
result in no-signal when configuring a mode on RK3328.

Fix this by rounding the rate down to closest 1000 Hz in round_rate func,
this allows an exact match to be found in pre pll config table.

Fixes: 287422a95f ("drm/rockchip: Round up _before_ giving to the clock framework")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-31 15:46:08 +05:30

1282 lines
37 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2017 Rockchip Electronics Co. Ltd.
*
* Author: Zheng Yang <zhengyang@rock-chips.com>
* Heiko Stuebner <heiko@sntech.de>
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/phy/phy.h>
#include <linux/slab.h>
#define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l)))
/* REG: 0x00 */
#define RK3228_PRE_PLL_REFCLK_SEL_PCLK BIT(0)
/* REG: 0x01 */
#define RK3228_BYPASS_RXSENSE_EN BIT(2)
#define RK3228_BYPASS_PWRON_EN BIT(1)
#define RK3228_BYPASS_PLLPD_EN BIT(0)
/* REG: 0x02 */
#define RK3228_BYPASS_PDATA_EN BIT(4)
#define RK3228_PDATAEN_DISABLE BIT(0)
/* REG: 0x03 */
#define RK3228_BYPASS_AUTO_TERM_RES_CAL BIT(7)
#define RK3228_AUTO_TERM_RES_CAL_SPEED_14_8(x) UPDATE(x, 6, 0)
/* REG: 0x04 */
#define RK3228_AUTO_TERM_RES_CAL_SPEED_7_0(x) UPDATE(x, 7, 0)
/* REG: 0xaa */
#define RK3228_POST_PLL_CTRL_MANUAL BIT(0)
/* REG: 0xe0 */
#define RK3228_POST_PLL_POWER_DOWN BIT(5)
#define RK3228_PRE_PLL_POWER_DOWN BIT(4)
#define RK3228_RXSENSE_CLK_CH_ENABLE BIT(3)
#define RK3228_RXSENSE_DATA_CH2_ENABLE BIT(2)
#define RK3228_RXSENSE_DATA_CH1_ENABLE BIT(1)
#define RK3228_RXSENSE_DATA_CH0_ENABLE BIT(0)
/* REG: 0xe1 */
#define RK3228_BANDGAP_ENABLE BIT(4)
#define RK3228_TMDS_DRIVER_ENABLE GENMASK(3, 0)
/* REG: 0xe2 */
#define RK3228_PRE_PLL_FB_DIV_8_MASK BIT(7)
#define RK3228_PRE_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7)
#define RK3228_PCLK_VCO_DIV_5_MASK BIT(5)
#define RK3228_PCLK_VCO_DIV_5(x) UPDATE(x, 5, 5)
#define RK3228_PRE_PLL_PRE_DIV_MASK GENMASK(4, 0)
#define RK3228_PRE_PLL_PRE_DIV(x) UPDATE(x, 4, 0)
/* REG: 0xe3 */
#define RK3228_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
/* REG: 0xe4 */
#define RK3228_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5)
#define RK3228_PRE_PLL_PCLK_DIV_B_SHIFT 5
#define RK3228_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5)
#define RK3228_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0)
#define RK3228_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0)
/* REG: 0xe5 */
#define RK3228_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5)
#define RK3228_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5)
#define RK3228_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0)
#define RK3228_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0)
/* REG: 0xe6 */
#define RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(5, 4)
#define RK3228_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 5, 4)
#define RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(3, 2)
#define RK3228_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 3, 2)
#define RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(1, 0)
#define RK3228_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 1, 0)
/* REG: 0xe8 */
#define RK3228_PRE_PLL_LOCK_STATUS BIT(0)
/* REG: 0xe9 */
#define RK3228_POST_PLL_POST_DIV_ENABLE UPDATE(3, 7, 6)
#define RK3228_POST_PLL_PRE_DIV_MASK GENMASK(4, 0)
#define RK3228_POST_PLL_PRE_DIV(x) UPDATE(x, 4, 0)
/* REG: 0xea */
#define RK3228_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
/* REG: 0xeb */
#define RK3228_POST_PLL_FB_DIV_8_MASK BIT(7)
#define RK3228_POST_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7)
#define RK3228_POST_PLL_POST_DIV_MASK GENMASK(5, 4)
#define RK3228_POST_PLL_POST_DIV(x) UPDATE(x, 5, 4)
#define RK3228_POST_PLL_LOCK_STATUS BIT(0)
/* REG: 0xee */
#define RK3228_TMDS_CH_TA_ENABLE GENMASK(7, 4)
/* REG: 0xef */
#define RK3228_TMDS_CLK_CH_TA(x) UPDATE(x, 7, 6)
#define RK3228_TMDS_DATA_CH2_TA(x) UPDATE(x, 5, 4)
#define RK3228_TMDS_DATA_CH1_TA(x) UPDATE(x, 3, 2)
#define RK3228_TMDS_DATA_CH0_TA(x) UPDATE(x, 1, 0)
/* REG: 0xf0 */
#define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS_MASK GENMASK(5, 4)
#define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS(x) UPDATE(x, 5, 4)
#define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS_MASK GENMASK(3, 2)
#define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS(x) UPDATE(x, 3, 2)
#define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS_MASK GENMASK(1, 0)
#define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS(x) UPDATE(x, 1, 0)
/* REG: 0xf1 */
#define RK3228_TMDS_CLK_CH_OUTPUT_SWING(x) UPDATE(x, 7, 4)
#define RK3228_TMDS_DATA_CH2_OUTPUT_SWING(x) UPDATE(x, 3, 0)
/* REG: 0xf2 */
#define RK3228_TMDS_DATA_CH1_OUTPUT_SWING(x) UPDATE(x, 7, 4)
#define RK3228_TMDS_DATA_CH0_OUTPUT_SWING(x) UPDATE(x, 3, 0)
/* REG: 0x01 */
#define RK3328_BYPASS_RXSENSE_EN BIT(2)
#define RK3328_BYPASS_POWERON_EN BIT(1)
#define RK3328_BYPASS_PLLPD_EN BIT(0)
/* REG: 0x02 */
#define RK3328_INT_POL_HIGH BIT(7)
#define RK3328_BYPASS_PDATA_EN BIT(4)
#define RK3328_PDATA_EN BIT(0)
/* REG:0x05 */
#define RK3328_INT_TMDS_CLK(x) UPDATE(x, 7, 4)
#define RK3328_INT_TMDS_D2(x) UPDATE(x, 3, 0)
/* REG:0x07 */
#define RK3328_INT_TMDS_D1(x) UPDATE(x, 7, 4)
#define RK3328_INT_TMDS_D0(x) UPDATE(x, 3, 0)
/* for all RK3328_INT_TMDS_*, ESD_DET as defined in 0xc8-0xcb */
#define RK3328_INT_AGND_LOW_PULSE_LOCKED BIT(3)
#define RK3328_INT_RXSENSE_LOW_PULSE_LOCKED BIT(2)
#define RK3328_INT_VSS_AGND_ESD_DET BIT(1)
#define RK3328_INT_AGND_VSS_ESD_DET BIT(0)
/* REG: 0xa0 */
#define RK3328_PCLK_VCO_DIV_5_MASK BIT(1)
#define RK3328_PCLK_VCO_DIV_5(x) UPDATE(x, 1, 1)
#define RK3328_PRE_PLL_POWER_DOWN BIT(0)
/* REG: 0xa1 */
#define RK3328_PRE_PLL_PRE_DIV_MASK GENMASK(5, 0)
#define RK3328_PRE_PLL_PRE_DIV(x) UPDATE(x, 5, 0)
/* REG: 0xa2 */
/* unset means center spread */
#define RK3328_SPREAD_SPECTRUM_MOD_DOWN BIT(7)
#define RK3328_SPREAD_SPECTRUM_MOD_DISABLE BIT(6)
#define RK3328_PRE_PLL_FRAC_DIV_DISABLE UPDATE(3, 5, 4)
#define RK3328_PRE_PLL_FB_DIV_11_8_MASK GENMASK(3, 0)
#define RK3328_PRE_PLL_FB_DIV_11_8(x) UPDATE((x) >> 8, 3, 0)
/* REG: 0xa3 */
#define RK3328_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
/* REG: 0xa4*/
#define RK3328_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(1, 0)
#define RK3328_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 1, 0)
#define RK3328_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(3, 2)
#define RK3328_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 3, 2)
#define RK3328_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(5, 4)
#define RK3328_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 5, 4)
/* REG: 0xa5 */
#define RK3328_PRE_PLL_PCLK_DIV_B_SHIFT 5
#define RK3328_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5)
#define RK3328_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5)
#define RK3328_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0)
#define RK3328_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0)
/* REG: 0xa6 */
#define RK3328_PRE_PLL_PCLK_DIV_C_SHIFT 5
#define RK3328_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5)
#define RK3328_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5)
#define RK3328_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0)
#define RK3328_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0)
/* REG: 0xa9 */
#define RK3328_PRE_PLL_LOCK_STATUS BIT(0)
/* REG: 0xaa */
#define RK3328_POST_PLL_POST_DIV_ENABLE GENMASK(3, 2)
#define RK3328_POST_PLL_REFCLK_SEL_TMDS BIT(1)
#define RK3328_POST_PLL_POWER_DOWN BIT(0)
/* REG:0xab */
#define RK3328_POST_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7)
#define RK3328_POST_PLL_PRE_DIV(x) UPDATE(x, 4, 0)
/* REG: 0xac */
#define RK3328_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
/* REG: 0xad */
#define RK3328_POST_PLL_POST_DIV_MASK GENMASK(1, 0)
#define RK3328_POST_PLL_POST_DIV_2 0x0
#define RK3328_POST_PLL_POST_DIV_4 0x1
#define RK3328_POST_PLL_POST_DIV_8 0x3
/* REG: 0xaf */
#define RK3328_POST_PLL_LOCK_STATUS BIT(0)
/* REG: 0xb0 */
#define RK3328_BANDGAP_ENABLE BIT(2)
/* REG: 0xb2 */
#define RK3328_TMDS_CLK_DRIVER_EN BIT(3)
#define RK3328_TMDS_D2_DRIVER_EN BIT(2)
#define RK3328_TMDS_D1_DRIVER_EN BIT(1)
#define RK3328_TMDS_D0_DRIVER_EN BIT(0)
#define RK3328_TMDS_DRIVER_ENABLE (RK3328_TMDS_CLK_DRIVER_EN | \
RK3328_TMDS_D2_DRIVER_EN | \
RK3328_TMDS_D1_DRIVER_EN | \
RK3328_TMDS_D0_DRIVER_EN)
/* REG:0xc5 */
#define RK3328_BYPASS_TERM_RESISTOR_CALIB BIT(7)
#define RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(x) UPDATE((x) >> 8, 6, 0)
/* REG:0xc6 */
#define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x) UPDATE(x, 7, 0)
/* REG:0xc7 */
#define RK3328_TERM_RESISTOR_50 UPDATE(0, 2, 1)
#define RK3328_TERM_RESISTOR_62_5 UPDATE(1, 2, 1)
#define RK3328_TERM_RESISTOR_75 UPDATE(2, 2, 1)
#define RK3328_TERM_RESISTOR_100 UPDATE(3, 2, 1)
/* REG 0xc8 - 0xcb */
#define RK3328_ESD_DETECT_MASK GENMASK(7, 6)
#define RK3328_ESD_DETECT_340MV (0x0 << 6)
#define RK3328_ESD_DETECT_280MV (0x1 << 6)
#define RK3328_ESD_DETECT_260MV (0x2 << 6)
#define RK3328_ESD_DETECT_240MV (0x3 << 6)
/* resistors can be used in parallel */
#define RK3328_TMDS_TERM_RESIST_MASK GENMASK(5, 0)
#define RK3328_TMDS_TERM_RESIST_75 BIT(5)
#define RK3328_TMDS_TERM_RESIST_150 BIT(4)
#define RK3328_TMDS_TERM_RESIST_300 BIT(3)
#define RK3328_TMDS_TERM_RESIST_600 BIT(2)
#define RK3328_TMDS_TERM_RESIST_1000 BIT(1)
#define RK3328_TMDS_TERM_RESIST_2000 BIT(0)
/* REG: 0xd1 */
#define RK3328_PRE_PLL_FRAC_DIV_23_16(x) UPDATE((x) >> 16, 7, 0)
/* REG: 0xd2 */
#define RK3328_PRE_PLL_FRAC_DIV_15_8(x) UPDATE((x) >> 8, 7, 0)
/* REG: 0xd3 */
#define RK3328_PRE_PLL_FRAC_DIV_7_0(x) UPDATE(x, 7, 0)
struct inno_hdmi_phy_drv_data;
struct inno_hdmi_phy {
struct device *dev;
struct regmap *regmap;
int irq;
struct phy *phy;
struct clk *sysclk;
struct clk *refoclk;
struct clk *refpclk;
/* platform data */
const struct inno_hdmi_phy_drv_data *plat_data;
int chip_version;
/* clk provider */
struct clk_hw hw;
struct clk *phyclk;
unsigned long pixclock;
};
struct pre_pll_config {
unsigned long pixclock;
unsigned long tmdsclock;
u8 prediv;
u16 fbdiv;
u8 tmds_div_a;
u8 tmds_div_b;
u8 tmds_div_c;
u8 pclk_div_a;
u8 pclk_div_b;
u8 pclk_div_c;
u8 pclk_div_d;
u8 vco_div_5_en;
u32 fracdiv;
};
struct post_pll_config {
unsigned long tmdsclock;
u8 prediv;
u16 fbdiv;
u8 postdiv;
u8 version;
};
struct phy_config {
unsigned long tmdsclock;
u8 regs[14];
};
struct inno_hdmi_phy_ops {
int (*init)(struct inno_hdmi_phy *inno);
int (*power_on)(struct inno_hdmi_phy *inno,
const struct post_pll_config *cfg,
const struct phy_config *phy_cfg);
void (*power_off)(struct inno_hdmi_phy *inno);
};
struct inno_hdmi_phy_drv_data {
const struct inno_hdmi_phy_ops *ops;
const struct clk_ops *clk_ops;
const struct phy_config *phy_cfg_table;
};
static const struct pre_pll_config pre_pll_cfg_table[] = {
{ 27000000, 27000000, 1, 90, 3, 2, 2, 10, 3, 3, 4, 0, 0},
{ 27000000, 33750000, 1, 90, 1, 3, 3, 10, 3, 3, 4, 0, 0},
{ 40000000, 40000000, 1, 80, 2, 2, 2, 12, 2, 2, 2, 0, 0},
{ 59341000, 59341000, 1, 98, 3, 1, 2, 1, 3, 3, 4, 0, 0xE6AE6B},
{ 59400000, 59400000, 1, 99, 3, 1, 1, 1, 3, 3, 4, 0, 0},
{ 59341000, 74176250, 1, 98, 0, 3, 3, 1, 3, 3, 4, 0, 0xE6AE6B},
{ 59400000, 74250000, 1, 99, 1, 2, 2, 1, 3, 3, 4, 0, 0},
{ 74176000, 74176000, 1, 98, 1, 2, 2, 1, 2, 3, 4, 0, 0xE6AE6B},
{ 74250000, 74250000, 1, 99, 1, 2, 2, 1, 2, 3, 4, 0, 0},
{ 74176000, 92720000, 4, 494, 1, 2, 2, 1, 3, 3, 4, 0, 0x816817},
{ 74250000, 92812500, 4, 495, 1, 2, 2, 1, 3, 3, 4, 0, 0},
{148352000, 148352000, 1, 98, 1, 1, 1, 1, 2, 2, 2, 0, 0xE6AE6B},
{148500000, 148500000, 1, 99, 1, 1, 1, 1, 2, 2, 2, 0, 0},
{148352000, 185440000, 4, 494, 0, 2, 2, 1, 3, 2, 2, 0, 0x816817},
{148500000, 185625000, 4, 495, 0, 2, 2, 1, 3, 2, 2, 0, 0},
{296703000, 296703000, 1, 98, 0, 1, 1, 1, 0, 2, 2, 0, 0xE6AE6B},
{297000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 2, 0, 0},
{296703000, 370878750, 4, 494, 1, 2, 0, 1, 3, 1, 1, 0, 0x816817},
{297000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 0, 0},
{593407000, 296703500, 1, 98, 0, 1, 1, 1, 0, 2, 1, 0, 0xE6AE6B},
{594000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 1, 0, 0},
{593407000, 370879375, 4, 494, 1, 2, 0, 1, 3, 1, 1, 1, 0x816817},
{594000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 1, 0},
{593407000, 593407000, 1, 98, 0, 2, 0, 1, 0, 1, 1, 0, 0xE6AE6B},
{594000000, 594000000, 1, 99, 0, 2, 0, 1, 0, 1, 1, 0, 0},
{ /* sentinel */ }
};
static const struct post_pll_config post_pll_cfg_table[] = {
{33750000, 1, 40, 8, 1},
{33750000, 1, 80, 8, 2},
{74250000, 1, 40, 8, 1},
{74250000, 18, 80, 8, 2},
{148500000, 2, 40, 4, 3},
{297000000, 4, 40, 2, 3},
{594000000, 8, 40, 1, 3},
{ /* sentinel */ }
};
/* phy tuning values for an undocumented set of registers */
static const struct phy_config rk3228_phy_cfg[] = {
{ 165000000, {
0xaa, 0x00, 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00,
},
}, {
340000000, {
0xaa, 0x15, 0x6a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00,
},
}, {
594000000, {
0xaa, 0x15, 0x7a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00,
},
}, { /* sentinel */ },
};
/* phy tuning values for an undocumented set of registers */
static const struct phy_config rk3328_phy_cfg[] = {
{ 165000000, {
0x07, 0x0a, 0x0a, 0x0a, 0x00, 0x00, 0x08, 0x08, 0x08,
0x00, 0xac, 0xcc, 0xcc, 0xcc,
},
}, {
340000000, {
0x0b, 0x0d, 0x0d, 0x0d, 0x07, 0x15, 0x08, 0x08, 0x08,
0x3f, 0xac, 0xcc, 0xcd, 0xdd,
},
}, {
594000000, {
0x10, 0x1a, 0x1a, 0x1a, 0x07, 0x15, 0x08, 0x08, 0x08,
0x00, 0xac, 0xcc, 0xcc, 0xcc,
},
}, { /* sentinel */ },
};
static inline struct inno_hdmi_phy *to_inno_hdmi_phy(struct clk_hw *hw)
{
return container_of(hw, struct inno_hdmi_phy, hw);
}
/*
* The register description of the IP block does not use any distinct names
* but instead the databook simply numbers the registers in one-increments.
* As the registers are obviously 32bit sized, the inno_* functions
* translate the databook register names to the actual registers addresses.
*/
static inline void inno_write(struct inno_hdmi_phy *inno, u32 reg, u8 val)
{
regmap_write(inno->regmap, reg * 4, val);
}
static inline u8 inno_read(struct inno_hdmi_phy *inno, u32 reg)
{
u32 val;
regmap_read(inno->regmap, reg * 4, &val);
return val;
}
static inline void inno_update_bits(struct inno_hdmi_phy *inno, u8 reg,
u8 mask, u8 val)
{
regmap_update_bits(inno->regmap, reg * 4, mask, val);
}
#define inno_poll(inno, reg, val, cond, sleep_us, timeout_us) \
regmap_read_poll_timeout((inno)->regmap, (reg) * 4, val, cond, \
sleep_us, timeout_us)
static unsigned long inno_hdmi_phy_get_tmdsclk(struct inno_hdmi_phy *inno,
unsigned long rate)
{
int bus_width = phy_get_bus_width(inno->phy);
switch (bus_width) {
case 4:
case 5:
case 6:
case 10:
case 12:
case 16:
return (u64)rate * bus_width / 8;
default:
return rate;
}
}
static irqreturn_t inno_hdmi_phy_rk3328_hardirq(int irq, void *dev_id)
{
struct inno_hdmi_phy *inno = dev_id;
int intr_stat1, intr_stat2, intr_stat3;
intr_stat1 = inno_read(inno, 0x04);
intr_stat2 = inno_read(inno, 0x06);
intr_stat3 = inno_read(inno, 0x08);
if (intr_stat1)
inno_write(inno, 0x04, intr_stat1);
if (intr_stat2)
inno_write(inno, 0x06, intr_stat2);
if (intr_stat3)
inno_write(inno, 0x08, intr_stat3);
if (intr_stat1 || intr_stat2 || intr_stat3)
return IRQ_WAKE_THREAD;
return IRQ_HANDLED;
}
static irqreturn_t inno_hdmi_phy_rk3328_irq(int irq, void *dev_id)
{
struct inno_hdmi_phy *inno = dev_id;
inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0);
usleep_range(10, 20);
inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN);
return IRQ_HANDLED;
}
static int inno_hdmi_phy_power_on(struct phy *phy)
{
struct inno_hdmi_phy *inno = phy_get_drvdata(phy);
const struct post_pll_config *cfg = post_pll_cfg_table;
const struct phy_config *phy_cfg = inno->plat_data->phy_cfg_table;
unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno,
inno->pixclock);
int ret;
if (!tmdsclock) {
dev_err(inno->dev, "TMDS clock is zero!\n");
return -EINVAL;
}
if (!inno->plat_data->ops->power_on)
return -EINVAL;
for (; cfg->tmdsclock != 0; cfg++)
if (tmdsclock <= cfg->tmdsclock &&
cfg->version & inno->chip_version)
break;
for (; phy_cfg->tmdsclock != 0; phy_cfg++)
if (tmdsclock <= phy_cfg->tmdsclock)
break;
if (cfg->tmdsclock == 0 || phy_cfg->tmdsclock == 0)
return -EINVAL;
dev_dbg(inno->dev, "Inno HDMI PHY Power On\n");
ret = clk_prepare_enable(inno->phyclk);
if (ret)
return ret;
ret = inno->plat_data->ops->power_on(inno, cfg, phy_cfg);
if (ret) {
clk_disable_unprepare(inno->phyclk);
return ret;
}
return 0;
}
static int inno_hdmi_phy_power_off(struct phy *phy)
{
struct inno_hdmi_phy *inno = phy_get_drvdata(phy);
if (!inno->plat_data->ops->power_off)
return -EINVAL;
inno->plat_data->ops->power_off(inno);
clk_disable_unprepare(inno->phyclk);
dev_dbg(inno->dev, "Inno HDMI PHY Power Off\n");
return 0;
}
static const struct phy_ops inno_hdmi_phy_ops = {
.owner = THIS_MODULE,
.power_on = inno_hdmi_phy_power_on,
.power_off = inno_hdmi_phy_power_off,
};
static const
struct pre_pll_config *inno_hdmi_phy_get_pre_pll_cfg(struct inno_hdmi_phy *inno,
unsigned long rate)
{
const struct pre_pll_config *cfg = pre_pll_cfg_table;
unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
for (; cfg->pixclock != 0; cfg++)
if (cfg->pixclock == rate && cfg->tmdsclock == tmdsclock)
break;
if (cfg->pixclock == 0)
return ERR_PTR(-EINVAL);
return cfg;
}
static int inno_hdmi_phy_rk3228_clk_is_prepared(struct clk_hw *hw)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
u8 status;
status = inno_read(inno, 0xe0) & RK3228_PRE_PLL_POWER_DOWN;
return status ? 0 : 1;
}
static int inno_hdmi_phy_rk3228_clk_prepare(struct clk_hw *hw)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0);
return 0;
}
static void inno_hdmi_phy_rk3228_clk_unprepare(struct clk_hw *hw)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN,
RK3228_PRE_PLL_POWER_DOWN);
}
static
unsigned long inno_hdmi_phy_rk3228_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
u8 nd, no_a, no_b, no_d;
u64 vco;
u16 nf;
nd = inno_read(inno, 0xe2) & RK3228_PRE_PLL_PRE_DIV_MASK;
nf = (inno_read(inno, 0xe2) & RK3228_PRE_PLL_FB_DIV_8_MASK) << 1;
nf |= inno_read(inno, 0xe3);
vco = parent_rate * nf;
if (inno_read(inno, 0xe2) & RK3228_PCLK_VCO_DIV_5_MASK) {
do_div(vco, nd * 5);
} else {
no_a = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_A_MASK;
if (!no_a)
no_a = 1;
no_b = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_B_MASK;
no_b >>= RK3228_PRE_PLL_PCLK_DIV_B_SHIFT;
no_b += 2;
no_d = inno_read(inno, 0xe5) & RK3228_PRE_PLL_PCLK_DIV_D_MASK;
do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
}
inno->pixclock = vco;
dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock);
return vco;
}
static long inno_hdmi_phy_rk3228_clk_round_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long *parent_rate)
{
const struct pre_pll_config *cfg = pre_pll_cfg_table;
rate = (rate / 1000) * 1000;
for (; cfg->pixclock != 0; cfg++)
if (cfg->pixclock == rate && !cfg->fracdiv)
break;
if (cfg->pixclock == 0)
return -EINVAL;
return cfg->pixclock;
}
static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
const struct pre_pll_config *cfg = pre_pll_cfg_table;
unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
u32 v;
int ret;
dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
__func__, rate, tmdsclock);
cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
if (IS_ERR(cfg))
return PTR_ERR(cfg);
/* Power down PRE-PLL */
inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN,
RK3228_PRE_PLL_POWER_DOWN);
inno_update_bits(inno, 0xe2, RK3228_PRE_PLL_FB_DIV_8_MASK |
RK3228_PCLK_VCO_DIV_5_MASK |
RK3228_PRE_PLL_PRE_DIV_MASK,
RK3228_PRE_PLL_FB_DIV_8(cfg->fbdiv) |
RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en) |
RK3228_PRE_PLL_PRE_DIV(cfg->prediv));
inno_write(inno, 0xe3, RK3228_PRE_PLL_FB_DIV_7_0(cfg->fbdiv));
inno_update_bits(inno, 0xe4, RK3228_PRE_PLL_PCLK_DIV_B_MASK |
RK3228_PRE_PLL_PCLK_DIV_A_MASK,
RK3228_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b) |
RK3228_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a));
inno_update_bits(inno, 0xe5, RK3228_PRE_PLL_PCLK_DIV_C_MASK |
RK3228_PRE_PLL_PCLK_DIV_D_MASK,
RK3228_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) |
RK3228_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d));
inno_update_bits(inno, 0xe6, RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK |
RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK |
RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK,
RK3228_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) |
RK3228_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) |
RK3228_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b));
/* Power up PRE-PLL */
inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0);
/* Wait for Pre-PLL lock */
ret = inno_poll(inno, 0xe8, v, v & RK3228_PRE_PLL_LOCK_STATUS,
100, 100000);
if (ret) {
dev_err(inno->dev, "Pre-PLL locking failed\n");
return ret;
}
inno->pixclock = rate;
return 0;
}
static const struct clk_ops inno_hdmi_phy_rk3228_clk_ops = {
.prepare = inno_hdmi_phy_rk3228_clk_prepare,
.unprepare = inno_hdmi_phy_rk3228_clk_unprepare,
.is_prepared = inno_hdmi_phy_rk3228_clk_is_prepared,
.recalc_rate = inno_hdmi_phy_rk3228_clk_recalc_rate,
.round_rate = inno_hdmi_phy_rk3228_clk_round_rate,
.set_rate = inno_hdmi_phy_rk3228_clk_set_rate,
};
static int inno_hdmi_phy_rk3328_clk_is_prepared(struct clk_hw *hw)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
u8 status;
status = inno_read(inno, 0xa0) & RK3328_PRE_PLL_POWER_DOWN;
return status ? 0 : 1;
}
static int inno_hdmi_phy_rk3328_clk_prepare(struct clk_hw *hw)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0);
return 0;
}
static void inno_hdmi_phy_rk3328_clk_unprepare(struct clk_hw *hw)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN,
RK3328_PRE_PLL_POWER_DOWN);
}
static
unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
unsigned long frac;
u8 nd, no_a, no_b, no_c, no_d;
u64 vco;
u16 nf;
nd = inno_read(inno, 0xa1) & RK3328_PRE_PLL_PRE_DIV_MASK;
nf = ((inno_read(inno, 0xa2) & RK3328_PRE_PLL_FB_DIV_11_8_MASK) << 8);
nf |= inno_read(inno, 0xa3);
vco = parent_rate * nf;
if (!(inno_read(inno, 0xa2) & RK3328_PRE_PLL_FRAC_DIV_DISABLE)) {
frac = inno_read(inno, 0xd3) |
(inno_read(inno, 0xd2) << 8) |
(inno_read(inno, 0xd1) << 16);
vco += DIV_ROUND_CLOSEST(parent_rate * frac, (1 << 24));
}
if (inno_read(inno, 0xa0) & RK3328_PCLK_VCO_DIV_5_MASK) {
do_div(vco, nd * 5);
} else {
no_a = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_A_MASK;
no_b = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_B_MASK;
no_b >>= RK3328_PRE_PLL_PCLK_DIV_B_SHIFT;
no_b += 2;
no_c = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_C_MASK;
no_c >>= RK3328_PRE_PLL_PCLK_DIV_C_SHIFT;
no_c = 1 << no_c;
no_d = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_D_MASK;
do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
}
inno->pixclock = vco;
dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock);
return vco;
}
static long inno_hdmi_phy_rk3328_clk_round_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long *parent_rate)
{
const struct pre_pll_config *cfg = pre_pll_cfg_table;
rate = (rate / 1000) * 1000;
for (; cfg->pixclock != 0; cfg++)
if (cfg->pixclock == rate)
break;
if (cfg->pixclock == 0)
return -EINVAL;
return cfg->pixclock;
}
static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
const struct pre_pll_config *cfg = pre_pll_cfg_table;
unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
u32 val;
int ret;
dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
__func__, rate, tmdsclock);
cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
if (IS_ERR(cfg))
return PTR_ERR(cfg);
inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN,
RK3328_PRE_PLL_POWER_DOWN);
/* Configure pre-pll */
inno_update_bits(inno, 0xa0, RK3228_PCLK_VCO_DIV_5_MASK,
RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en));
inno_write(inno, 0xa1, RK3328_PRE_PLL_PRE_DIV(cfg->prediv));
val = RK3328_SPREAD_SPECTRUM_MOD_DISABLE;
if (!cfg->fracdiv)
val |= RK3328_PRE_PLL_FRAC_DIV_DISABLE;
inno_write(inno, 0xa2, RK3328_PRE_PLL_FB_DIV_11_8(cfg->fbdiv) | val);
inno_write(inno, 0xa3, RK3328_PRE_PLL_FB_DIV_7_0(cfg->fbdiv));
inno_write(inno, 0xa5, RK3328_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a) |
RK3328_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b));
inno_write(inno, 0xa6, RK3328_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) |
RK3328_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d));
inno_write(inno, 0xa4, RK3328_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) |
RK3328_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) |
RK3328_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b));
inno_write(inno, 0xd3, RK3328_PRE_PLL_FRAC_DIV_7_0(cfg->fracdiv));
inno_write(inno, 0xd2, RK3328_PRE_PLL_FRAC_DIV_15_8(cfg->fracdiv));
inno_write(inno, 0xd1, RK3328_PRE_PLL_FRAC_DIV_23_16(cfg->fracdiv));
inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0);
/* Wait for Pre-PLL lock */
ret = inno_poll(inno, 0xa9, val, val & RK3328_PRE_PLL_LOCK_STATUS,
1000, 10000);
if (ret) {
dev_err(inno->dev, "Pre-PLL locking failed\n");
return ret;
}
inno->pixclock = rate;
return 0;
}
static const struct clk_ops inno_hdmi_phy_rk3328_clk_ops = {
.prepare = inno_hdmi_phy_rk3328_clk_prepare,
.unprepare = inno_hdmi_phy_rk3328_clk_unprepare,
.is_prepared = inno_hdmi_phy_rk3328_clk_is_prepared,
.recalc_rate = inno_hdmi_phy_rk3328_clk_recalc_rate,
.round_rate = inno_hdmi_phy_rk3328_clk_round_rate,
.set_rate = inno_hdmi_phy_rk3328_clk_set_rate,
};
static int inno_hdmi_phy_clk_register(struct inno_hdmi_phy *inno)
{
struct device *dev = inno->dev;
struct device_node *np = dev->of_node;
struct clk_init_data init;
const char *parent_name;
int ret;
parent_name = __clk_get_name(inno->refoclk);
init.parent_names = &parent_name;
init.num_parents = 1;
init.flags = 0;
init.name = "pin_hd20_pclk";
init.ops = inno->plat_data->clk_ops;
/* optional override of the clock name */
of_property_read_string(np, "clock-output-names", &init.name);
inno->hw.init = &init;
inno->phyclk = devm_clk_register(dev, &inno->hw);
if (IS_ERR(inno->phyclk)) {
ret = PTR_ERR(inno->phyclk);
dev_err(dev, "failed to register clock: %d\n", ret);
return ret;
}
ret = of_clk_add_provider(np, of_clk_src_simple_get, inno->phyclk);
if (ret) {
dev_err(dev, "failed to register clock provider: %d\n", ret);
return ret;
}
return 0;
}
static int inno_hdmi_phy_rk3228_init(struct inno_hdmi_phy *inno)
{
/*
* Use phy internal register control
* rxsense/poweron/pllpd/pdataen signal.
*/
inno_write(inno, 0x01, RK3228_BYPASS_RXSENSE_EN |
RK3228_BYPASS_PWRON_EN |
RK3228_BYPASS_PLLPD_EN);
inno_update_bits(inno, 0x02, RK3228_BYPASS_PDATA_EN,
RK3228_BYPASS_PDATA_EN);
/* manual power down post-PLL */
inno_update_bits(inno, 0xaa, RK3228_POST_PLL_CTRL_MANUAL,
RK3228_POST_PLL_CTRL_MANUAL);
inno->chip_version = 1;
return 0;
}
static int
inno_hdmi_phy_rk3228_power_on(struct inno_hdmi_phy *inno,
const struct post_pll_config *cfg,
const struct phy_config *phy_cfg)
{
int ret;
u32 v;
inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE,
RK3228_PDATAEN_DISABLE);
inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN |
RK3228_POST_PLL_POWER_DOWN,
RK3228_PRE_PLL_POWER_DOWN |
RK3228_POST_PLL_POWER_DOWN);
/* Post-PLL update */
inno_update_bits(inno, 0xe9, RK3228_POST_PLL_PRE_DIV_MASK,
RK3228_POST_PLL_PRE_DIV(cfg->prediv));
inno_update_bits(inno, 0xeb, RK3228_POST_PLL_FB_DIV_8_MASK,
RK3228_POST_PLL_FB_DIV_8(cfg->fbdiv));
inno_write(inno, 0xea, RK3228_POST_PLL_FB_DIV_7_0(cfg->fbdiv));
if (cfg->postdiv == 1) {
inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE,
0);
} else {
int div = cfg->postdiv / 2 - 1;
inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE,
RK3228_POST_PLL_POST_DIV_ENABLE);
inno_update_bits(inno, 0xeb, RK3228_POST_PLL_POST_DIV_MASK,
RK3228_POST_PLL_POST_DIV(div));
}
for (v = 0; v < 4; v++)
inno_write(inno, 0xef + v, phy_cfg->regs[v]);
inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN |
RK3228_POST_PLL_POWER_DOWN, 0);
inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE,
RK3228_BANDGAP_ENABLE);
inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE,
RK3228_TMDS_DRIVER_ENABLE);
/* Wait for post PLL lock */
ret = inno_poll(inno, 0xeb, v, v & RK3228_POST_PLL_LOCK_STATUS,
100, 100000);
if (ret) {
dev_err(inno->dev, "Post-PLL locking failed\n");
return ret;
}
if (cfg->tmdsclock > 340000000)
msleep(100);
inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE, 0);
return 0;
}
static void inno_hdmi_phy_rk3228_power_off(struct inno_hdmi_phy *inno)
{
inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE, 0);
inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE, 0);
inno_update_bits(inno, 0xe0, RK3228_POST_PLL_POWER_DOWN,
RK3228_POST_PLL_POWER_DOWN);
}
static const struct inno_hdmi_phy_ops rk3228_hdmi_phy_ops = {
.init = inno_hdmi_phy_rk3228_init,
.power_on = inno_hdmi_phy_rk3228_power_on,
.power_off = inno_hdmi_phy_rk3228_power_off,
};
static int inno_hdmi_phy_rk3328_init(struct inno_hdmi_phy *inno)
{
struct nvmem_cell *cell;
unsigned char *efuse_buf;
size_t len;
/*
* Use phy internal register control
* rxsense/poweron/pllpd/pdataen signal.
*/
inno_write(inno, 0x01, RK3328_BYPASS_RXSENSE_EN |
RK3328_BYPASS_POWERON_EN |
RK3328_BYPASS_PLLPD_EN);
inno_write(inno, 0x02, RK3328_INT_POL_HIGH | RK3328_BYPASS_PDATA_EN |
RK3328_PDATA_EN);
/* Disable phy irq */
inno_write(inno, 0x05, 0);
inno_write(inno, 0x07, 0);
/* try to read the chip-version */
inno->chip_version = 1;
cell = nvmem_cell_get(inno->dev, "cpu-version");
if (IS_ERR(cell)) {
if (PTR_ERR(cell) == -EPROBE_DEFER)
return -EPROBE_DEFER;
return 0;
}
efuse_buf = nvmem_cell_read(cell, &len);
nvmem_cell_put(cell);
if (IS_ERR(efuse_buf))
return 0;
if (len == 1)
inno->chip_version = efuse_buf[0] + 1;
kfree(efuse_buf);
return 0;
}
static int
inno_hdmi_phy_rk3328_power_on(struct inno_hdmi_phy *inno,
const struct post_pll_config *cfg,
const struct phy_config *phy_cfg)
{
int ret;
u32 v;
inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0);
inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN,
RK3328_POST_PLL_POWER_DOWN);
inno_write(inno, 0xac, RK3328_POST_PLL_FB_DIV_7_0(cfg->fbdiv));
if (cfg->postdiv == 1) {
inno_write(inno, 0xaa, RK3328_POST_PLL_REFCLK_SEL_TMDS);
inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) |
RK3328_POST_PLL_PRE_DIV(cfg->prediv));
} else {
v = (cfg->postdiv / 2) - 1;
v &= RK3328_POST_PLL_POST_DIV_MASK;
inno_write(inno, 0xad, v);
inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) |
RK3328_POST_PLL_PRE_DIV(cfg->prediv));
inno_write(inno, 0xaa, RK3328_POST_PLL_POST_DIV_ENABLE |
RK3328_POST_PLL_REFCLK_SEL_TMDS);
}
for (v = 0; v < 14; v++)
inno_write(inno, 0xb5 + v, phy_cfg->regs[v]);
/* set ESD detection threshold for TMDS CLK, D2, D1 and D0 */
for (v = 0; v < 4; v++)
inno_update_bits(inno, 0xc8 + v, RK3328_ESD_DETECT_MASK,
RK3328_ESD_DETECT_340MV);
if (phy_cfg->tmdsclock > 340000000) {
/* Set termination resistor to 100ohm */
v = clk_get_rate(inno->sysclk) / 100000;
inno_write(inno, 0xc5, RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(v)
| RK3328_BYPASS_TERM_RESISTOR_CALIB);
inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v));
inno_write(inno, 0xc7, RK3328_TERM_RESISTOR_100);
inno_update_bits(inno, 0xc5,
RK3328_BYPASS_TERM_RESISTOR_CALIB, 0);
} else {
inno_write(inno, 0xc5, RK3328_BYPASS_TERM_RESISTOR_CALIB);
/* clk termination resistor is 50ohm (parallel resistors) */
if (phy_cfg->tmdsclock > 165000000)
inno_update_bits(inno, 0xc8,
RK3328_TMDS_TERM_RESIST_MASK,
RK3328_TMDS_TERM_RESIST_75 |
RK3328_TMDS_TERM_RESIST_150);
/* data termination resistor for D2, D1 and D0 is 150ohm */
for (v = 0; v < 3; v++)
inno_update_bits(inno, 0xc9 + v,
RK3328_TMDS_TERM_RESIST_MASK,
RK3328_TMDS_TERM_RESIST_150);
}
inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, 0);
inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE,
RK3328_BANDGAP_ENABLE);
inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE,
RK3328_TMDS_DRIVER_ENABLE);
/* Wait for post PLL lock */
ret = inno_poll(inno, 0xaf, v, v & RK3328_POST_PLL_LOCK_STATUS,
1000, 10000);
if (ret) {
dev_err(inno->dev, "Post-PLL locking failed\n");
return ret;
}
if (phy_cfg->tmdsclock > 340000000)
msleep(100);
inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN);
/* Enable PHY IRQ */
inno_write(inno, 0x05, RK3328_INT_TMDS_CLK(RK3328_INT_VSS_AGND_ESD_DET)
| RK3328_INT_TMDS_D2(RK3328_INT_VSS_AGND_ESD_DET));
inno_write(inno, 0x07, RK3328_INT_TMDS_D1(RK3328_INT_VSS_AGND_ESD_DET)
| RK3328_INT_TMDS_D0(RK3328_INT_VSS_AGND_ESD_DET));
return 0;
}
static void inno_hdmi_phy_rk3328_power_off(struct inno_hdmi_phy *inno)
{
inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE, 0);
inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE, 0);
inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN,
RK3328_POST_PLL_POWER_DOWN);
/* Disable PHY IRQ */
inno_write(inno, 0x05, 0);
inno_write(inno, 0x07, 0);
}
static const struct inno_hdmi_phy_ops rk3328_hdmi_phy_ops = {
.init = inno_hdmi_phy_rk3328_init,
.power_on = inno_hdmi_phy_rk3328_power_on,
.power_off = inno_hdmi_phy_rk3328_power_off,
};
static const struct inno_hdmi_phy_drv_data rk3228_hdmi_phy_drv_data = {
.ops = &rk3228_hdmi_phy_ops,
.clk_ops = &inno_hdmi_phy_rk3228_clk_ops,
.phy_cfg_table = rk3228_phy_cfg,
};
static const struct inno_hdmi_phy_drv_data rk3328_hdmi_phy_drv_data = {
.ops = &rk3328_hdmi_phy_ops,
.clk_ops = &inno_hdmi_phy_rk3328_clk_ops,
.phy_cfg_table = rk3328_phy_cfg,
};
static const struct regmap_config inno_hdmi_phy_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0x400,
};
static void inno_hdmi_phy_action(void *data)
{
struct inno_hdmi_phy *inno = data;
clk_disable_unprepare(inno->refpclk);
clk_disable_unprepare(inno->sysclk);
}
static int inno_hdmi_phy_probe(struct platform_device *pdev)
{
struct inno_hdmi_phy *inno;
struct phy_provider *phy_provider;
struct resource *res;
void __iomem *regs;
int ret;
inno = devm_kzalloc(&pdev->dev, sizeof(*inno), GFP_KERNEL);
if (!inno)
return -ENOMEM;
inno->dev = &pdev->dev;
inno->plat_data = of_device_get_match_data(inno->dev);
if (!inno->plat_data || !inno->plat_data->ops)
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(inno->dev, res);
if (IS_ERR(regs))
return PTR_ERR(regs);
inno->sysclk = devm_clk_get(inno->dev, "sysclk");
if (IS_ERR(inno->sysclk)) {
ret = PTR_ERR(inno->sysclk);
dev_err(inno->dev, "failed to get sysclk: %d\n", ret);
return ret;
}
inno->refpclk = devm_clk_get(inno->dev, "refpclk");
if (IS_ERR(inno->refpclk)) {
ret = PTR_ERR(inno->refpclk);
dev_err(inno->dev, "failed to get ref clock: %d\n", ret);
return ret;
}
inno->refoclk = devm_clk_get(inno->dev, "refoclk");
if (IS_ERR(inno->refoclk)) {
ret = PTR_ERR(inno->refoclk);
dev_err(inno->dev, "failed to get oscillator-ref clock: %d\n",
ret);
return ret;
}
ret = clk_prepare_enable(inno->sysclk);
if (ret) {
dev_err(inno->dev, "Cannot enable inno phy sysclk: %d\n", ret);
return ret;
}
/*
* Refpclk needs to be on, on at least the rk3328 for still
* unknown reasons.
*/
ret = clk_prepare_enable(inno->refpclk);
if (ret) {
dev_err(inno->dev, "failed to enable refpclk\n");
clk_disable_unprepare(inno->sysclk);
return ret;
}
ret = devm_add_action_or_reset(inno->dev, inno_hdmi_phy_action,
inno);
if (ret)
return ret;
inno->regmap = devm_regmap_init_mmio(inno->dev, regs,
&inno_hdmi_phy_regmap_config);
if (IS_ERR(inno->regmap))
return PTR_ERR(inno->regmap);
/* only the newer rk3328 hdmiphy has an interrupt */
inno->irq = platform_get_irq(pdev, 0);
if (inno->irq > 0) {
ret = devm_request_threaded_irq(inno->dev, inno->irq,
inno_hdmi_phy_rk3328_hardirq,
inno_hdmi_phy_rk3328_irq,
IRQF_SHARED,
dev_name(inno->dev), inno);
if (ret)
return ret;
}
inno->phy = devm_phy_create(inno->dev, NULL, &inno_hdmi_phy_ops);
if (IS_ERR(inno->phy)) {
dev_err(inno->dev, "failed to create HDMI PHY\n");
return PTR_ERR(inno->phy);
}
phy_set_drvdata(inno->phy, inno);
phy_set_bus_width(inno->phy, 8);
if (inno->plat_data->ops->init) {
ret = inno->plat_data->ops->init(inno);
if (ret)
return ret;
}
ret = inno_hdmi_phy_clk_register(inno);
if (ret)
return ret;
phy_provider = devm_of_phy_provider_register(inno->dev,
of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static int inno_hdmi_phy_remove(struct platform_device *pdev)
{
of_clk_del_provider(pdev->dev.of_node);
return 0;
}
static const struct of_device_id inno_hdmi_phy_of_match[] = {
{
.compatible = "rockchip,rk3228-hdmi-phy",
.data = &rk3228_hdmi_phy_drv_data
}, {
.compatible = "rockchip,rk3328-hdmi-phy",
.data = &rk3328_hdmi_phy_drv_data
}, { /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, inno_hdmi_phy_of_match);
static struct platform_driver inno_hdmi_phy_driver = {
.probe = inno_hdmi_phy_probe,
.remove = inno_hdmi_phy_remove,
.driver = {
.name = "inno-hdmi-phy",
.of_match_table = inno_hdmi_phy_of_match,
},
};
module_platform_driver(inno_hdmi_phy_driver);
MODULE_AUTHOR("Zheng Yang <zhengyang@rock-chips.com>");
MODULE_DESCRIPTION("Innosilion HDMI 2.0 Transmitter PHY Driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink