linux_dsm_epyc7002/drivers/clk/meson/clk-mpll.c
Jerome Brunet 19855c8276 clk: meson: mpll: add init callback and regs
Until now (gx and axg), the mpll setting on boot (whatever the
bootloader) was good enough to generate a clean fractional division.

It is not the case on the g12a. While moving away from the vendor u-boot,
it was noticed the fractional part of the divider was no longer applied.
Like on the pll, some magic settings need to applied on the mpll
register.

This change adds the ability to do that on the mpll driver.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-20 12:19:29 +02:00

173 lines
4.1 KiB
C

// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
/*
* Copyright (c) 2016 AmLogic, Inc.
* Author: Michael Turquette <mturquette@baylibre.com>
*/
/*
* MultiPhase Locked Loops are outputs from a PLL with additional frequency
* scaling capabilities. MPLL rates are calculated as:
*
* f(N2_integer, SDM_IN ) = 2.0G/(N2_integer + SDM_IN/16384)
*/
#include <linux/clk-provider.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include "clk-regmap.h"
#include "clk-mpll.h"
#define SDM_DEN 16384
#define N2_MIN 4
#define N2_MAX 511
static inline struct meson_clk_mpll_data *
meson_clk_mpll_data(struct clk_regmap *clk)
{
return (struct meson_clk_mpll_data *)clk->data;
}
static long rate_from_params(unsigned long parent_rate,
unsigned int sdm,
unsigned int n2)
{
unsigned long divisor = (SDM_DEN * n2) + sdm;
if (n2 < N2_MIN)
return -EINVAL;
return DIV_ROUND_UP_ULL((u64)parent_rate * SDM_DEN, divisor);
}
static void params_from_rate(unsigned long requested_rate,
unsigned long parent_rate,
unsigned int *sdm,
unsigned int *n2,
u8 flags)
{
uint64_t div = parent_rate;
uint64_t frac = do_div(div, requested_rate);
frac *= SDM_DEN;
if (flags & CLK_MESON_MPLL_ROUND_CLOSEST)
*sdm = DIV_ROUND_CLOSEST_ULL(frac, requested_rate);
else
*sdm = DIV_ROUND_UP_ULL(frac, requested_rate);
if (*sdm == SDM_DEN) {
*sdm = 0;
div += 1;
}
if (div < N2_MIN) {
*n2 = N2_MIN;
*sdm = 0;
} else if (div > N2_MAX) {
*n2 = N2_MAX;
*sdm = SDM_DEN - 1;
} else {
*n2 = div;
}
}
static unsigned long mpll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_mpll_data *mpll = meson_clk_mpll_data(clk);
unsigned int sdm, n2;
long rate;
sdm = meson_parm_read(clk->map, &mpll->sdm);
n2 = meson_parm_read(clk->map, &mpll->n2);
rate = rate_from_params(parent_rate, sdm, n2);
return rate < 0 ? 0 : rate;
}
static long mpll_round_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long *parent_rate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_mpll_data *mpll = meson_clk_mpll_data(clk);
unsigned int sdm, n2;
params_from_rate(rate, *parent_rate, &sdm, &n2, mpll->flags);
return rate_from_params(*parent_rate, sdm, n2);
}
static int mpll_set_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_mpll_data *mpll = meson_clk_mpll_data(clk);
unsigned int sdm, n2;
unsigned long flags = 0;
params_from_rate(rate, parent_rate, &sdm, &n2, mpll->flags);
if (mpll->lock)
spin_lock_irqsave(mpll->lock, flags);
else
__acquire(mpll->lock);
/* Set the fractional part */
meson_parm_write(clk->map, &mpll->sdm, sdm);
/* Set the integer divider part */
meson_parm_write(clk->map, &mpll->n2, n2);
if (mpll->lock)
spin_unlock_irqrestore(mpll->lock, flags);
else
__release(mpll->lock);
return 0;
}
static void mpll_init(struct clk_hw *hw)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_mpll_data *mpll = meson_clk_mpll_data(clk);
if (mpll->init_count)
regmap_multi_reg_write(clk->map, mpll->init_regs,
mpll->init_count);
/* Enable the fractional part */
meson_parm_write(clk->map, &mpll->sdm_en, 1);
/* Set spread spectrum if possible */
if (MESON_PARM_APPLICABLE(&mpll->ssen)) {
unsigned int ss =
mpll->flags & CLK_MESON_MPLL_SPREAD_SPECTRUM ? 1 : 0;
meson_parm_write(clk->map, &mpll->ssen, ss);
}
/* Set the magic misc bit if required */
if (MESON_PARM_APPLICABLE(&mpll->misc))
meson_parm_write(clk->map, &mpll->misc, 1);
}
const struct clk_ops meson_clk_mpll_ro_ops = {
.recalc_rate = mpll_recalc_rate,
.round_rate = mpll_round_rate,
};
EXPORT_SYMBOL_GPL(meson_clk_mpll_ro_ops);
const struct clk_ops meson_clk_mpll_ops = {
.recalc_rate = mpll_recalc_rate,
.round_rate = mpll_round_rate,
.set_rate = mpll_set_rate,
.init = mpll_init,
};
EXPORT_SYMBOL_GPL(meson_clk_mpll_ops);
MODULE_DESCRIPTION("Amlogic MPLL driver");
MODULE_AUTHOR("Michael Turquette <mturquette@baylibre.com>");
MODULE_LICENSE("GPL v2");