mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-07 16:06:39 +07:00
f991fae5c6
- Hotplug changes allowing device hot-removal operations to fail gracefully (instead of crashing the kernel) if they cannot be carried out completely. From Rafael J Wysocki and Toshi Kani. - Freezer update from Colin Cross and Mandeep Singh Baines targeted at making the freezing of tasks a bit less heavy weight operation. - cpufreq resume fix from Srivatsa S Bhat for a regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. - New freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus from Lan Tianyu. - cpufreq fixes and cleanups from Viresh Kumar, Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - Fix for an ACPICA regression causing suspend/resume issues to appear on some systems introduced during the 3.4 development cycle from Lv Zheng. - ACPICA fixes and cleanups from Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - New cupidle driver for Xilinx Zynq processors from Michal Simek. - cpuidle fixes and cleanups from Daniel Lezcano. - Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk. - ACPI device power management fixes and cleanups from Fengguang Wu and Rafael J Wysocki. - ACPI documentation updates from Lv Zheng, Aaron Lu and Hanjun Guo. - Fix for the IA-64 issue that was the reason for reverting commit9f29ab1
and updates of the ACPI scan code from Rafael J Wysocki. - Mechanism for adding CMOS RTC address space handlers from Lan Tianyu (to allow some EC-related breakage to be fixed on some systems). - Spec-compliant implementation of acpi_os_get_timer() from Mika Westerberg. - Modification of do_acpi_find_child() to execute _STA in order to to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. - Intel BayTrail PCH (Platform Controller Hub) support for the ACPI Intel Low-Power Subsystems (LPSS) driver and modificaions of that driver to work around a couple of known BIOS issues from Mika Westerberg and Heikki Krogerus. - EC driver fix from Vasiliy Kulikov to make it use get_user() and put_user() instead of dereferencing user space pointers blindly. - Assorted ACPI code cleanups from Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Modification of the "runtime idle" helper routine to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows some code bloat reduction to be done, from Rafael J Wysocki and Alan Stern. - New trace points for PM QoS from Sahara <keun-o.park@windriver.com>. - PM QoS documentation update from Lan Tianyu. - Assorted core PM code cleanups and changes from Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - New devfreq driver for the Exynos5-bus device from Abhilash Kesavan. - Minor devfreq cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon. / -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAABAgAGBQJR0ZNOAAoJEKhOf7ml8uNsDLYP/0EU4rmvw0TWTITfp6RS1KDE 9GwBn96ZR4Q5bJd9gBCTPSqhHOYMqxWEUp99sn/M2wehG1pk/jw5LO56+2IhM3UZ g1HDcJ7te2nVT/iXsKiAGTVhU9Rk0aYwoVSknwk27qpIBGxW9w/s5tLX8pY3Q3Zq wL/7aTPjyL+PFFFEaxgH7qLqsl3DhbtYW5AriUBTkXout/tJ4eO1b7MNBncLDh8X VQ/0DNCKE95VEJfkO4rk9RKUyVp9GDn0i+HXCD/FS4IA5oYzePdVdNDmXf7g+swe CGlTZq8pB+oBpDiHl4lxzbNrKQjRNbGnDUkoRcWqn0nAw56xK+vmYnWJhW99gQ/I fKnvxeLca5po1aiqmC4VSJxZIatFZqLrZAI4dzoCLWY+bGeTnCKmj0/F8ytFnZA2 8IuLLs7/dFOaHXV/pKmpg6FAlFa9CPxoqRFoyqb4M0GjEarADyalXUWsPtG+6xCp R/p0CISpwk+guKZR/qPhL7M654S7SHrPwd2DPF0KgGsvk+G2GhoB8EzvD8BVp98Z 9siCGCdgKQfJQVI6R0k9aFmn/4gRQIAgyPhkhv9tqULUUkiaXki+/t8kPfnb8O/d zep+CA57E2G8MYLkDJfpFeKS7GpPD6TIdgFdGmOUC0Y6sl9iTdiw4yTx8O2JM37z rHBZfYGkJBrbGRu+Q1gs =VBBq -----END PGP SIGNATURE----- Merge tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit9f29ab11dd
("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
653 lines
16 KiB
Plaintext
653 lines
16 KiB
Plaintext
config MMU
|
|
bool
|
|
default y
|
|
|
|
config ZONE_DMA
|
|
bool
|
|
default y
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
bool
|
|
default y
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
bool
|
|
|
|
config ARCH_HAS_ILOG2_U32
|
|
bool
|
|
default n
|
|
|
|
config ARCH_HAS_ILOG2_U64
|
|
bool
|
|
default n
|
|
|
|
config GENERIC_HWEIGHT
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
bool
|
|
default y
|
|
|
|
config NO_IOPORT
|
|
def_bool y
|
|
|
|
config FORCE_MAX_ZONEORDER
|
|
int
|
|
default 6
|
|
|
|
config CRIS
|
|
bool
|
|
default y
|
|
select HAVE_IDE
|
|
select GENERIC_ATOMIC64
|
|
select HAVE_GENERIC_HARDIRQS
|
|
select HAVE_UID16
|
|
select VIRT_TO_BUS
|
|
select ARCH_WANT_IPC_PARSE_VERSION
|
|
select GENERIC_IRQ_SHOW
|
|
select GENERIC_IOMAP
|
|
select GENERIC_SMP_IDLE_THREAD if ETRAX_ARCH_V32
|
|
select GENERIC_CMOS_UPDATE
|
|
select MODULES_USE_ELF_RELA
|
|
select CLONE_BACKWARDS2
|
|
select OLD_SIGSUSPEND
|
|
select OLD_SIGACTION
|
|
|
|
config HZ
|
|
int
|
|
default 100
|
|
|
|
source "init/Kconfig"
|
|
|
|
source "kernel/Kconfig.freezer"
|
|
|
|
menu "General setup"
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
config ETRAX_CMDLINE
|
|
string "Kernel command line"
|
|
default "root=/dev/mtdblock3"
|
|
help
|
|
Pass additional commands to the kernel.
|
|
|
|
config ETRAX_WATCHDOG
|
|
bool "Enable ETRAX watchdog"
|
|
help
|
|
Enable the built-in watchdog timer support on ETRAX based embedded
|
|
network computers.
|
|
|
|
config ETRAX_WATCHDOG_NICE_DOGGY
|
|
bool "Disable watchdog during Oops printouts"
|
|
depends on ETRAX_WATCHDOG
|
|
help
|
|
By enabling this you make sure that the watchdog does not bite while
|
|
printing oopses. Recommended for development systems but not for
|
|
production releases.
|
|
|
|
config ETRAX_FAST_TIMER
|
|
bool "Enable ETRAX fast timer API"
|
|
help
|
|
This options enables the API to a fast timer implementation using
|
|
timer1 to get sub jiffie resolution timers (primarily one-shot
|
|
timers).
|
|
This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
|
|
|
|
config ETRAX_KMALLOCED_MODULES
|
|
bool "Enable module allocation with kmalloc"
|
|
help
|
|
Enable module allocation with kmalloc instead of vmalloc.
|
|
|
|
config OOM_REBOOT
|
|
bool "Enable reboot at out of memory"
|
|
|
|
source "kernel/Kconfig.preempt"
|
|
|
|
source mm/Kconfig
|
|
|
|
endmenu
|
|
|
|
menu "Hardware setup"
|
|
|
|
choice
|
|
prompt "Processor type"
|
|
default ETRAX100LX
|
|
|
|
config ETRAX100LX
|
|
bool "ETRAX-100LX-v1"
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Support version 1 of the ETRAX 100LX.
|
|
|
|
config ETRAX100LX_V2
|
|
bool "ETRAX-100LX-v2"
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Support version 2 of the ETRAX 100LX.
|
|
|
|
config SVINTO_SIM
|
|
bool "ETRAX-100LX-for-xsim-simulator"
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Support the xsim ETRAX Simulator.
|
|
|
|
config ETRAXFS
|
|
bool "ETRAX-FS-V32"
|
|
select CPU_FREQ_TABLE if CPU_FREQ
|
|
help
|
|
Support CRIS V32.
|
|
|
|
config CRIS_MACH_ARTPEC3
|
|
bool "ARTPEC-3"
|
|
select CPU_FREQ_TABLE if CPU_FREQ
|
|
help
|
|
Support Axis ARTPEC-3.
|
|
|
|
endchoice
|
|
|
|
config ETRAX_ARCH_V10
|
|
bool
|
|
default y if ETRAX100LX || ETRAX100LX_V2
|
|
default n if !(ETRAX100LX || ETRAX100LX_V2)
|
|
|
|
config ETRAX_ARCH_V32
|
|
bool
|
|
default y if (ETRAXFS || CRIS_MACH_ARTPEC3)
|
|
default n if !(ETRAXFS || CRIS_MACH_ARTPEC3)
|
|
|
|
config ETRAX_DRAM_SIZE
|
|
int "DRAM size (dec, in MB)"
|
|
default "8"
|
|
help
|
|
Size of DRAM (decimal in MB) typically 2, 8 or 16.
|
|
|
|
config ETRAX_VMEM_SIZE
|
|
int "Video memory size (dec, in MB)"
|
|
depends on ETRAX_ARCH_V32 && !ETRAXFS
|
|
default 8 if !ETRAXFS
|
|
help
|
|
Size of Video accessible memory (decimal, in MB).
|
|
|
|
config ETRAX_FLASH_BUSWIDTH
|
|
int "Buswidth of NOR flash in bytes"
|
|
default "2"
|
|
help
|
|
Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
|
|
|
|
config ETRAX_NANDFLASH_BUSWIDTH
|
|
int "Buswidth of NAND flash in bytes"
|
|
default "1"
|
|
help
|
|
Width in bytes of the NAND flash (1 or 2).
|
|
|
|
config ETRAX_FLASH1_SIZE
|
|
int "FLASH1 size (dec, in MB. 0 = Unknown)"
|
|
default "0"
|
|
|
|
choice
|
|
prompt "Product debug-port"
|
|
default ETRAX_DEBUG_PORT0
|
|
|
|
config ETRAX_DEBUG_PORT0
|
|
bool "Serial-0"
|
|
help
|
|
Choose a serial port for the ETRAX debug console. Default to
|
|
port 0.
|
|
|
|
config ETRAX_DEBUG_PORT1
|
|
bool "Serial-1"
|
|
help
|
|
Use serial port 1 for the console.
|
|
|
|
config ETRAX_DEBUG_PORT2
|
|
bool "Serial-2"
|
|
help
|
|
Use serial port 2 for the console.
|
|
|
|
config ETRAX_DEBUG_PORT3
|
|
bool "Serial-3"
|
|
help
|
|
Use serial port 3 for the console.
|
|
|
|
config ETRAX_DEBUG_PORT_NULL
|
|
bool "disabled"
|
|
help
|
|
Disable serial-port debugging.
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Kernel GDB port"
|
|
depends on ETRAX_KGDB
|
|
default ETRAX_KGDB_PORT0
|
|
help
|
|
Choose a serial port for kernel debugging. NOTE: This port should
|
|
not be enabled under Drivers for built-in interfaces (as it has its
|
|
own initialization code) and should not be the same as the debug port.
|
|
|
|
config ETRAX_KGDB_PORT0
|
|
bool "Serial-0"
|
|
help
|
|
Use serial port 0 for kernel debugging.
|
|
|
|
config ETRAX_KGDB_PORT1
|
|
bool "Serial-1"
|
|
help
|
|
Use serial port 1 for kernel debugging.
|
|
|
|
config ETRAX_KGDB_PORT2
|
|
bool "Serial-2"
|
|
help
|
|
Use serial port 2 for kernel debugging.
|
|
|
|
config ETRAX_KGDB_PORT3
|
|
bool "Serial-3"
|
|
help
|
|
Use serial port 3 for kernel debugging.
|
|
|
|
endchoice
|
|
|
|
source arch/cris/arch-v10/Kconfig
|
|
source arch/cris/arch-v32/Kconfig
|
|
|
|
endmenu
|
|
|
|
source "net/Kconfig"
|
|
|
|
# bring in ETRAX built-in drivers
|
|
menu "Drivers for built-in interfaces"
|
|
source arch/cris/arch-v10/drivers/Kconfig
|
|
source arch/cris/arch-v32/drivers/Kconfig
|
|
|
|
config ETRAX_AXISFLASHMAP
|
|
bool "Axis flash-map support"
|
|
select MTD
|
|
select MTD_CFI
|
|
select MTD_CFI_AMDSTD
|
|
select MTD_JEDECPROBE if ETRAX_ARCH_V32
|
|
select MTD_BLOCK
|
|
select MTD_COMPLEX_MAPPINGS
|
|
help
|
|
This option enables MTD mapping of flash devices. Needed to use
|
|
flash memories. If unsure, say Y.
|
|
|
|
config ETRAX_RTC
|
|
bool "Real Time Clock support"
|
|
depends on ETRAX_I2C
|
|
help
|
|
Enables drivers for the Real-Time Clock battery-backed chips on
|
|
some products. The kernel reads the time when booting, and
|
|
the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
|
|
rtc_time struct (see <file:arch/cris/include/asm/rtc.h>) on the
|
|
/dev/rtc device. You can check the time with cat /proc/rtc, but
|
|
normal time reading should be done using libc function time and
|
|
friends.
|
|
|
|
choice
|
|
prompt "RTC chip"
|
|
depends on ETRAX_RTC
|
|
default ETRAX_DS1302
|
|
|
|
config ETRAX_DS1302
|
|
depends on ETRAX_ARCH_V10
|
|
bool "DS1302"
|
|
help
|
|
Enables the driver for the DS1302 Real-Time Clock battery-backed
|
|
chip on some products.
|
|
|
|
config ETRAX_PCF8563
|
|
bool "PCF8563"
|
|
help
|
|
Enables the driver for the PCF8563 Real-Time Clock battery-backed
|
|
chip on some products.
|
|
|
|
endchoice
|
|
|
|
config ETRAX_SYNCHRONOUS_SERIAL
|
|
bool "Synchronous serial-port support"
|
|
help
|
|
Select this to enable the synchronous serial port driver.
|
|
|
|
config ETRAX_SYNCHRONOUS_SERIAL_PORT0
|
|
bool "Synchronous serial port 0 enabled"
|
|
depends on ETRAX_SYNCHRONOUS_SERIAL
|
|
help
|
|
Enabled synchronous serial port 0.
|
|
|
|
config ETRAX_SYNCHRONOUS_SERIAL0_DMA
|
|
bool "Enable DMA on synchronous serial port 0."
|
|
depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0
|
|
help
|
|
A synchronous serial port can run in manual or DMA mode.
|
|
Selecting this option will make it run in DMA mode.
|
|
|
|
config ETRAX_SYNCHRONOUS_SERIAL_PORT1
|
|
bool "Synchronous serial port 1 enabled"
|
|
depends on ETRAX_SYNCHRONOUS_SERIAL && (ETRAXFS || ETRAX_ARCH_V10)
|
|
help
|
|
Enabled synchronous serial port 1.
|
|
|
|
config ETRAX_SYNCHRONOUS_SERIAL1_DMA
|
|
bool "Enable DMA on synchronous serial port 1."
|
|
depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1
|
|
help
|
|
A synchronous serial port can run in manual or DMA mode.
|
|
Selecting this option will make it run in DMA mode.
|
|
|
|
choice
|
|
prompt "Network LED behavior"
|
|
depends on ETRAX_ETHERNET
|
|
default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
|
|
|
|
config ETRAX_NETWORK_LED_ON_WHEN_LINK
|
|
bool "LED_on_when_link"
|
|
help
|
|
Selecting LED_on_when_link will light the LED when there is a
|
|
connection and will flash off when there is activity.
|
|
|
|
Selecting LED_on_when_activity will light the LED only when
|
|
there is activity.
|
|
|
|
This setting will also affect the behaviour of other activity LEDs
|
|
e.g. Bluetooth.
|
|
|
|
config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
|
|
bool "LED_on_when_activity"
|
|
help
|
|
Selecting LED_on_when_link will light the LED when there is a
|
|
connection and will flash off when there is activity.
|
|
|
|
Selecting LED_on_when_activity will light the LED only when
|
|
there is activity.
|
|
|
|
This setting will also affect the behaviour of other activity LEDs
|
|
e.g. Bluetooth.
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Ser0 DMA out channel"
|
|
depends on ETRAX_SERIAL_PORT0
|
|
default ETRAX_SERIAL_PORT0_DMA6_OUT if ETRAX_ARCH_V32
|
|
default ETRAX_SERIAL_PORT0_NO_DMA_OUT if ETRAX_ARCH_V10
|
|
|
|
config ETRAX_SERIAL_PORT0_NO_DMA_OUT
|
|
bool "Ser0 uses no DMA for output"
|
|
help
|
|
Do not use DMA for ser0 output.
|
|
|
|
config ETRAX_SERIAL_PORT0_DMA6_OUT
|
|
bool "Ser0 uses DMA6 for output"
|
|
depends on ETRAXFS
|
|
help
|
|
Enables the DMA6 output channel for ser0 (ttyS0).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when transmitting data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
config ETRAX_SERIAL_PORT0_DMA0_OUT
|
|
bool "Ser0 uses DMA0 for output"
|
|
depends on CRIS_MACH_ARTPEC3
|
|
help
|
|
Enables the DMA0 output channel for ser0 (ttyS0).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when transmitting data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Ser0 DMA in channel "
|
|
depends on ETRAX_SERIAL_PORT0
|
|
default ETRAX_SERIAL_PORT0_NO_DMA_IN if ETRAX_ARCH_V32
|
|
default ETRAX_SERIAL_PORT0_DMA7_IN if ETRAX_ARCH_V10
|
|
help
|
|
What DMA channel to use for ser0.
|
|
|
|
config ETRAX_SERIAL_PORT0_NO_DMA_IN
|
|
bool "Ser0 uses no DMA for input"
|
|
help
|
|
Do not use DMA for ser0 input.
|
|
|
|
config ETRAX_SERIAL_PORT0_DMA7_IN
|
|
bool "Ser0 uses DMA7 for input"
|
|
depends on ETRAXFS
|
|
help
|
|
Enables the DMA7 input channel for ser0 (ttyS0).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when receiving data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
config ETRAX_SERIAL_PORT0_DMA1_IN
|
|
bool "Ser0 uses DMA1 for input"
|
|
depends on CRIS_MACH_ARTPEC3
|
|
help
|
|
Enables the DMA1 input channel for ser0 (ttyS0).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when receiving data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Ser1 DMA in channel "
|
|
depends on ETRAX_SERIAL_PORT1
|
|
default ETRAX_SERIAL_PORT1_NO_DMA_IN if ETRAX_ARCH_V32
|
|
default ETRAX_SERIAL_PORT1_DMA9_IN if ETRAX_ARCH_V10
|
|
help
|
|
What DMA channel to use for ser1.
|
|
|
|
config ETRAX_SERIAL_PORT1_NO_DMA_IN
|
|
bool "Ser1 uses no DMA for input"
|
|
help
|
|
Do not use DMA for ser1 input.
|
|
|
|
config ETRAX_SERIAL_PORT1_DMA5_IN
|
|
bool "Ser1 uses DMA5 for input"
|
|
depends on ETRAX_ARCH_V32
|
|
help
|
|
Enables the DMA5 input channel for ser1 (ttyS1).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when receiving data.
|
|
Normally you want this on, unless you use the DMA channel for
|
|
something else.
|
|
|
|
config ETRAX_SERIAL_PORT1_DMA9_IN
|
|
depends on ETRAX_ARCH_V10
|
|
bool "Ser1 uses DMA9 for input"
|
|
|
|
endchoice
|
|
|
|
|
|
choice
|
|
prompt "Ser1 DMA out channel"
|
|
depends on ETRAX_SERIAL_PORT1
|
|
default ETRAX_SERIAL_PORT1_NO_DMA_OUT if ETRAX_ARCH_V32
|
|
default ETRAX_SERIAL_PORT1_DMA8_OUT if ETRAX_ARCH_V10
|
|
help
|
|
What DMA channel to use for ser1.
|
|
|
|
config ETRAX_SERIAL_PORT1_NO_DMA_OUT
|
|
bool "Ser1 uses no DMA for output"
|
|
help
|
|
Do not use DMA for ser1 output.
|
|
|
|
config ETRAX_SERIAL_PORT1_DMA8_OUT
|
|
depends on ETRAX_ARCH_V10
|
|
bool "Ser1 uses DMA8 for output"
|
|
|
|
config ETRAX_SERIAL_PORT1_DMA4_OUT
|
|
depends on ETRAX_ARCH_V32
|
|
bool "Ser1 uses DMA4 for output"
|
|
help
|
|
Enables the DMA4 output channel for ser1 (ttyS1).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when transmitting data.
|
|
Normally you want this on, unless you use the DMA channel for
|
|
something else.
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Ser2 DMA out channel"
|
|
depends on ETRAX_SERIAL_PORT2
|
|
default ETRAX_SERIAL_PORT2_NO_DMA_OUT if ETRAX_ARCH_V32
|
|
default ETRAX_SERIAL_PORT2_DMA2_OUT if ETRAX_ARCH_V10
|
|
|
|
config ETRAX_SERIAL_PORT2_NO_DMA_OUT
|
|
bool "Ser2 uses no DMA for output"
|
|
help
|
|
Do not use DMA for ser2 output.
|
|
|
|
config ETRAX_SERIAL_PORT2_DMA2_OUT
|
|
bool "Ser2 uses DMA2 for output"
|
|
depends on ETRAXFS || ETRAX_ARCH_V10
|
|
help
|
|
Enables the DMA2 output channel for ser2 (ttyS2).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when transmitting data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
config ETRAX_SERIAL_PORT2_DMA6_OUT
|
|
bool "Ser2 uses DMA6 for output"
|
|
depends on CRIS_MACH_ARTPEC3
|
|
help
|
|
Enables the DMA6 output channel for ser2 (ttyS2).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when transmitting data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Ser2 DMA in channel"
|
|
depends on ETRAX_SERIAL_PORT2
|
|
default ETRAX_SERIAL_PORT2_NO_DMA_IN if ETRAX_ARCH_V32
|
|
default ETRAX_SERIAL_PORT2_DMA3_IN if ETRAX_ARCH_V10
|
|
help
|
|
What DMA channel to use for ser2.
|
|
|
|
config ETRAX_SERIAL_PORT2_NO_DMA_IN
|
|
bool "Ser2 uses no DMA for input"
|
|
help
|
|
Do not use DMA for ser2 input.
|
|
|
|
config ETRAX_SERIAL_PORT2_DMA3_IN
|
|
bool "Ser2 uses DMA3 for input"
|
|
depends on ETRAXFS || ETRAX_ARCH_V10
|
|
help
|
|
Enables the DMA3 input channel for ser2 (ttyS2).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when receiving data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
config ETRAX_SERIAL_PORT2_DMA7_IN
|
|
bool "Ser2 uses DMA7 for input"
|
|
depends on CRIS_MACH_ARTPEC3
|
|
help
|
|
Enables the DMA7 input channel for ser2 (ttyS2).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when receiving data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Ser3 DMA in channel"
|
|
depends on ETRAX_SERIAL_PORT3
|
|
default ETRAX_SERIAL_PORT3_NO_DMA_IN if ETRAX_ARCH_V32
|
|
default ETRAX_SERIAL_PORT3_DMA5_IN if ETRAX_ARCH_V10
|
|
help
|
|
What DMA channel to use for ser3.
|
|
|
|
config ETRAX_SERIAL_PORT3_NO_DMA_IN
|
|
bool "Ser3 uses no DMA for input"
|
|
help
|
|
Do not use DMA for ser3 input.
|
|
|
|
config ETRAX_SERIAL_PORT3_DMA5_IN
|
|
depends on ETRAX_ARCH_V10
|
|
bool "DMA 5"
|
|
|
|
config ETRAX_SERIAL_PORT3_DMA9_IN
|
|
bool "Ser3 uses DMA9 for input"
|
|
depends on ETRAXFS
|
|
help
|
|
Enables the DMA9 input channel for ser3 (ttyS3).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when receiving data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
config ETRAX_SERIAL_PORT3_DMA3_IN
|
|
bool "Ser3 uses DMA3 for input"
|
|
depends on CRIS_MACH_ARTPEC3
|
|
help
|
|
Enables the DMA3 input channel for ser3 (ttyS3).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when receiving data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Ser3 DMA out channel"
|
|
depends on ETRAX_SERIAL_PORT3
|
|
default ETRAX_SERIAL_PORT3_NO_DMA_OUT if ETRAX_ARCH_V32
|
|
default ETRAX_SERIAL_PORT3_DMA4_OUT if ETRAX_ARCH_V10
|
|
|
|
config ETRAX_SERIAL_PORT3_NO_DMA_OUT
|
|
bool "Ser3 uses no DMA for output"
|
|
help
|
|
Do not use DMA for ser3 output.
|
|
|
|
config ETRAX_SERIAL_PORT3_DMA4_OUT
|
|
depends on ETRAX_ARCH_V10
|
|
bool "DMA 4"
|
|
|
|
config ETRAX_SERIAL_PORT3_DMA8_OUT
|
|
bool "Ser3 uses DMA8 for output"
|
|
depends on ETRAXFS
|
|
help
|
|
Enables the DMA8 output channel for ser3 (ttyS3).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when transmitting data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
config ETRAX_SERIAL_PORT3_DMA2_OUT
|
|
bool "Ser3 uses DMA2 for output"
|
|
depends on CRIS_MACH_ARTPEC3
|
|
help
|
|
Enables the DMA2 output channel for ser3 (ttyS3).
|
|
If you do not enable DMA, an interrupt for each character will be
|
|
used when transmitting data.
|
|
Normally you want to use DMA, unless you use the DMA channel for
|
|
something else.
|
|
|
|
endchoice
|
|
|
|
endmenu
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/cris/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|
|
|
|
source "lib/Kconfig"
|