mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 01:24:47 +07:00
e922602eda
Instead of storing the buscore information now the BCMA core device is kept for quick reference in si_info structure. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
827 lines
23 KiB
C
827 lines
23 KiB
C
/*
|
|
* Copyright (c) 2010 Broadcom Corporation
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
|
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
|
|
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
|
|
#include <defs.h>
|
|
#include <soc.h>
|
|
#include <chipcommon.h>
|
|
#include "aiutils.h"
|
|
#include "pub.h"
|
|
#include "nicpci.h"
|
|
|
|
/* SPROM offsets */
|
|
#define SRSH_ASPM_OFFSET 4 /* word 4 */
|
|
#define SRSH_ASPM_ENB 0x18 /* bit 3, 4 */
|
|
#define SRSH_ASPM_L1_ENB 0x10 /* bit 4 */
|
|
#define SRSH_ASPM_L0s_ENB 0x8 /* bit 3 */
|
|
|
|
#define SRSH_PCIE_MISC_CONFIG 5 /* word 5 */
|
|
#define SRSH_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */
|
|
#define SRSH_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */
|
|
#define SRSH_CLKREQ_ENB 0x0800 /* bit 11 */
|
|
#define SRSH_BD_OFFSET 6 /* word 6 */
|
|
|
|
/* chipcontrol */
|
|
#define CHIPCTRL_4321_PLL_DOWN 0x800000/* serdes PLL down override */
|
|
|
|
/* MDIO control */
|
|
#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */
|
|
#define MDIOCTL_DIVISOR_VAL 0x2
|
|
#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */
|
|
#define MDIOCTL_ACCESS_DONE 0x100 /* Transaction complete */
|
|
|
|
/* MDIO Data */
|
|
#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */
|
|
#define MDIODATA_TA 0x00020000 /* Turnaround */
|
|
|
|
#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */
|
|
#define MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */
|
|
#define MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */
|
|
#define MDIODATA_DEVADDR_MASK 0x0f800000
|
|
/* Physmedia devaddr Mask */
|
|
|
|
/* MDIO Data for older revisions < 10 */
|
|
#define MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift */
|
|
#define MDIODATA_REGADDR_MASK_OLD 0x003c0000
|
|
/* Regaddr Mask */
|
|
#define MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift */
|
|
#define MDIODATA_DEVADDR_MASK_OLD 0x0fc00000
|
|
/* Physmedia devaddr Mask */
|
|
|
|
/* Transactions flags */
|
|
#define MDIODATA_WRITE 0x10000000
|
|
#define MDIODATA_READ 0x20000000
|
|
#define MDIODATA_START 0x40000000
|
|
|
|
#define MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */
|
|
#define MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */
|
|
|
|
/* serdes regs (rev < 10) */
|
|
#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */
|
|
#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
|
|
#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
|
|
|
|
/* SERDES RX registers */
|
|
#define SERDES_RX_CTRL 1 /* Rx cntrl */
|
|
#define SERDES_RX_TIMER1 2 /* Rx Timer1 */
|
|
#define SERDES_RX_CDR 6 /* CDR */
|
|
#define SERDES_RX_CDRBW 7 /* CDR BW */
|
|
/* SERDES RX control register */
|
|
#define SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */
|
|
#define SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */
|
|
|
|
/* SERDES PLL registers */
|
|
#define SERDES_PLL_CTRL 1 /* PLL control reg */
|
|
#define PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */
|
|
|
|
/* Linkcontrol reg offset in PCIE Cap */
|
|
#define PCIE_CAP_LINKCTRL_OFFSET 16 /* offset in pcie cap */
|
|
#define PCIE_CAP_LCREG_ASPML0s 0x01 /* ASPM L0s in linkctrl */
|
|
#define PCIE_CAP_LCREG_ASPML1 0x02 /* ASPM L1 in linkctrl */
|
|
#define PCIE_CLKREQ_ENAB 0x100 /* CLKREQ Enab in linkctrl */
|
|
|
|
#define PCIE_ASPM_ENAB 3 /* ASPM L0s & L1 in linkctrl */
|
|
#define PCIE_ASPM_L1_ENAB 2 /* ASPM L0s & L1 in linkctrl */
|
|
#define PCIE_ASPM_L0s_ENAB 1 /* ASPM L0s & L1 in linkctrl */
|
|
#define PCIE_ASPM_DISAB 0 /* ASPM L0s & L1 in linkctrl */
|
|
|
|
/* Power management threshold */
|
|
#define PCIE_L1THRESHOLDTIME_MASK 0xFF00 /* bits 8 - 15 */
|
|
#define PCIE_L1THRESHOLDTIME_SHIFT 8 /* PCIE_L1THRESHOLDTIME_SHIFT */
|
|
#define PCIE_L1THRESHOLD_WARVAL 0x72 /* WAR value */
|
|
#define PCIE_ASPMTIMER_EXTEND 0x01000000
|
|
/* > rev7:
|
|
* enable extend ASPM timer
|
|
*/
|
|
|
|
/* different register spaces to access thru pcie indirect access */
|
|
#define PCIE_CONFIGREGS 1 /* Access to config space */
|
|
#define PCIE_PCIEREGS 2 /* Access to pcie registers */
|
|
|
|
/* PCIE protocol PHY diagnostic registers */
|
|
#define PCIE_PLP_STATUSREG 0x204 /* Status */
|
|
|
|
/* Status reg PCIE_PLP_STATUSREG */
|
|
#define PCIE_PLP_POLARITYINV_STAT 0x10
|
|
|
|
/* PCIE protocol DLLP diagnostic registers */
|
|
#define PCIE_DLLP_LCREG 0x100 /* Link Control */
|
|
#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */
|
|
|
|
/* PCIE protocol TLP diagnostic registers */
|
|
#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */
|
|
|
|
/* Sonics to PCI translation types */
|
|
#define SBTOPCI_PREF 0x4 /* prefetch enable */
|
|
#define SBTOPCI_BURST 0x8 /* burst enable */
|
|
#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */
|
|
|
|
#define PCI_CLKRUN_DSBL 0x8000 /* Bit 15 forceClkrun */
|
|
|
|
/* PCI core index in SROM shadow area */
|
|
#define SRSH_PI_OFFSET 0 /* first word */
|
|
#define SRSH_PI_MASK 0xf000 /* bit 15:12 */
|
|
#define SRSH_PI_SHIFT 12 /* bit 15:12 */
|
|
|
|
#define PCIREGOFFS(field) offsetof(struct sbpciregs, field)
|
|
#define PCIEREGOFFS(field) offsetof(struct sbpcieregs, field)
|
|
|
|
/* Sonics side: PCI core and host control registers */
|
|
struct sbpciregs {
|
|
u32 control; /* PCI control */
|
|
u32 PAD[3];
|
|
u32 arbcontrol; /* PCI arbiter control */
|
|
u32 clkrun; /* Clkrun Control (>=rev11) */
|
|
u32 PAD[2];
|
|
u32 intstatus; /* Interrupt status */
|
|
u32 intmask; /* Interrupt mask */
|
|
u32 sbtopcimailbox; /* Sonics to PCI mailbox */
|
|
u32 PAD[9];
|
|
u32 bcastaddr; /* Sonics broadcast address */
|
|
u32 bcastdata; /* Sonics broadcast data */
|
|
u32 PAD[2];
|
|
u32 gpioin; /* ro: gpio input (>=rev2) */
|
|
u32 gpioout; /* rw: gpio output (>=rev2) */
|
|
u32 gpioouten; /* rw: gpio output enable (>= rev2) */
|
|
u32 gpiocontrol; /* rw: gpio control (>= rev2) */
|
|
u32 PAD[36];
|
|
u32 sbtopci0; /* Sonics to PCI translation 0 */
|
|
u32 sbtopci1; /* Sonics to PCI translation 1 */
|
|
u32 sbtopci2; /* Sonics to PCI translation 2 */
|
|
u32 PAD[189];
|
|
u32 pcicfg[4][64]; /* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */
|
|
u16 sprom[36]; /* SPROM shadow Area */
|
|
u32 PAD[46];
|
|
};
|
|
|
|
/* SB side: PCIE core and host control registers */
|
|
struct sbpcieregs {
|
|
u32 control; /* host mode only */
|
|
u32 PAD[2];
|
|
u32 biststatus; /* bist Status: 0x00C */
|
|
u32 gpiosel; /* PCIE gpio sel: 0x010 */
|
|
u32 gpioouten; /* PCIE gpio outen: 0x14 */
|
|
u32 PAD[2];
|
|
u32 intstatus; /* Interrupt status: 0x20 */
|
|
u32 intmask; /* Interrupt mask: 0x24 */
|
|
u32 sbtopcimailbox; /* sb to pcie mailbox: 0x028 */
|
|
u32 PAD[53];
|
|
u32 sbtopcie0; /* sb to pcie translation 0: 0x100 */
|
|
u32 sbtopcie1; /* sb to pcie translation 1: 0x104 */
|
|
u32 sbtopcie2; /* sb to pcie translation 2: 0x108 */
|
|
u32 PAD[5];
|
|
|
|
/* pcie core supports in direct access to config space */
|
|
u32 configaddr; /* pcie config space access: Address field: 0x120 */
|
|
u32 configdata; /* pcie config space access: Data field: 0x124 */
|
|
|
|
/* mdio access to serdes */
|
|
u32 mdiocontrol; /* controls the mdio access: 0x128 */
|
|
u32 mdiodata; /* Data to the mdio access: 0x12c */
|
|
|
|
/* pcie protocol phy/dllp/tlp register indirect access mechanism */
|
|
u32 pcieindaddr; /* indirect access to
|
|
* the internal register: 0x130
|
|
*/
|
|
u32 pcieinddata; /* Data to/from the internal regsiter: 0x134 */
|
|
|
|
u32 clkreqenctrl; /* >= rev 6, Clkreq rdma control : 0x138 */
|
|
u32 PAD[177];
|
|
u32 pciecfg[4][64]; /* 0x400 - 0x7FF, PCIE Cfg Space */
|
|
u16 sprom[64]; /* SPROM shadow Area */
|
|
};
|
|
|
|
struct pcicore_info {
|
|
struct bcma_device *core;
|
|
struct si_pub *sih; /* System interconnect handle */
|
|
struct pci_dev *dev;
|
|
u8 pciecap_lcreg_offset;/* PCIE capability LCreg offset
|
|
* in the config space
|
|
*/
|
|
bool pcie_pr42767;
|
|
u8 pcie_polarity;
|
|
u8 pcie_war_aspm_ovr; /* Override ASPM/Clkreq settings */
|
|
|
|
u8 pmecap_offset; /* PM Capability offset in the config space */
|
|
bool pmecap; /* Capable of generating PME */
|
|
};
|
|
|
|
#define PCIE_ASPM(sih) \
|
|
((ai_get_buscoretype(sih) == PCIE_CORE_ID) && \
|
|
((ai_get_buscorerev(sih) >= 3) && \
|
|
(ai_get_buscorerev(sih) <= 5)))
|
|
|
|
|
|
/* delay needed between the mdio control/ mdiodata register data access */
|
|
static void pr28829_delay(void)
|
|
{
|
|
udelay(10);
|
|
}
|
|
|
|
/* Initialize the PCI core.
|
|
* It's caller's responsibility to make sure that this is done only once
|
|
*/
|
|
struct pcicore_info *pcicore_init(struct si_pub *sih, struct bcma_device *core)
|
|
{
|
|
struct pcicore_info *pi;
|
|
|
|
/* alloc struct pcicore_info */
|
|
pi = kzalloc(sizeof(struct pcicore_info), GFP_ATOMIC);
|
|
if (pi == NULL)
|
|
return NULL;
|
|
|
|
pi->sih = sih;
|
|
pi->dev = core->bus->host_pci;
|
|
pi->core = core;
|
|
|
|
if (core->id.id == PCIE_CORE_ID) {
|
|
u8 cap_ptr;
|
|
cap_ptr = pcicore_find_pci_capability(pi->dev, PCI_CAP_ID_EXP,
|
|
NULL, NULL);
|
|
pi->pciecap_lcreg_offset = cap_ptr + PCIE_CAP_LINKCTRL_OFFSET;
|
|
}
|
|
return pi;
|
|
}
|
|
|
|
void pcicore_deinit(struct pcicore_info *pch)
|
|
{
|
|
kfree(pch);
|
|
}
|
|
|
|
/* return cap_offset if requested capability exists in the PCI config space */
|
|
/* Note that it's caller's responsibility to make sure it's a pci bus */
|
|
u8
|
|
pcicore_find_pci_capability(struct pci_dev *dev, u8 req_cap_id,
|
|
unsigned char *buf, u32 *buflen)
|
|
{
|
|
u8 cap_id;
|
|
u8 cap_ptr = 0;
|
|
u32 bufsize;
|
|
u8 byte_val;
|
|
|
|
/* check for Header type 0 */
|
|
pci_read_config_byte(dev, PCI_HEADER_TYPE, &byte_val);
|
|
if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL)
|
|
goto end;
|
|
|
|
/* check if the capability pointer field exists */
|
|
pci_read_config_byte(dev, PCI_STATUS, &byte_val);
|
|
if (!(byte_val & PCI_STATUS_CAP_LIST))
|
|
goto end;
|
|
|
|
pci_read_config_byte(dev, PCI_CAPABILITY_LIST, &cap_ptr);
|
|
/* check if the capability pointer is 0x00 */
|
|
if (cap_ptr == 0x00)
|
|
goto end;
|
|
|
|
/* loop thru the capability list
|
|
* and see if the pcie capability exists
|
|
*/
|
|
|
|
pci_read_config_byte(dev, cap_ptr, &cap_id);
|
|
|
|
while (cap_id != req_cap_id) {
|
|
pci_read_config_byte(dev, cap_ptr + 1, &cap_ptr);
|
|
if (cap_ptr == 0x00)
|
|
break;
|
|
pci_read_config_byte(dev, cap_ptr, &cap_id);
|
|
}
|
|
if (cap_id != req_cap_id)
|
|
goto end;
|
|
|
|
/* found the caller requested capability */
|
|
if (buf != NULL && buflen != NULL) {
|
|
u8 cap_data;
|
|
|
|
bufsize = *buflen;
|
|
if (!bufsize)
|
|
goto end;
|
|
*buflen = 0;
|
|
/* copy the capability data excluding cap ID and next ptr */
|
|
cap_data = cap_ptr + 2;
|
|
if ((bufsize + cap_data) > PCI_SZPCR)
|
|
bufsize = PCI_SZPCR - cap_data;
|
|
*buflen = bufsize;
|
|
while (bufsize--) {
|
|
pci_read_config_byte(dev, cap_data, buf);
|
|
cap_data++;
|
|
buf++;
|
|
}
|
|
}
|
|
end:
|
|
return cap_ptr;
|
|
}
|
|
|
|
/* ***** Register Access API */
|
|
static uint
|
|
pcie_readreg(struct bcma_device *core, uint addrtype, uint offset)
|
|
{
|
|
uint retval = 0xFFFFFFFF;
|
|
|
|
switch (addrtype) {
|
|
case PCIE_CONFIGREGS:
|
|
bcma_write32(core, PCIEREGOFFS(configaddr), offset);
|
|
(void)bcma_read32(core, PCIEREGOFFS(configaddr));
|
|
retval = bcma_read32(core, PCIEREGOFFS(configdata));
|
|
break;
|
|
case PCIE_PCIEREGS:
|
|
bcma_write32(core, PCIEREGOFFS(pcieindaddr), offset);
|
|
(void)bcma_read32(core, PCIEREGOFFS(pcieindaddr));
|
|
retval = bcma_read32(core, PCIEREGOFFS(pcieinddata));
|
|
break;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static uint pcie_writereg(struct bcma_device *core, uint addrtype,
|
|
uint offset, uint val)
|
|
{
|
|
switch (addrtype) {
|
|
case PCIE_CONFIGREGS:
|
|
bcma_write32(core, PCIEREGOFFS(configaddr), offset);
|
|
bcma_write32(core, PCIEREGOFFS(configdata), val);
|
|
break;
|
|
case PCIE_PCIEREGS:
|
|
bcma_write32(core, PCIEREGOFFS(pcieindaddr), offset);
|
|
bcma_write32(core, PCIEREGOFFS(pcieinddata), val);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static bool pcie_mdiosetblock(struct pcicore_info *pi, uint blk)
|
|
{
|
|
uint mdiodata, i = 0;
|
|
uint pcie_serdes_spinwait = 200;
|
|
|
|
mdiodata = (MDIODATA_START | MDIODATA_WRITE | MDIODATA_TA |
|
|
(MDIODATA_DEV_ADDR << MDIODATA_DEVADDR_SHF) |
|
|
(MDIODATA_BLK_ADDR << MDIODATA_REGADDR_SHF) |
|
|
(blk << 4));
|
|
bcma_write32(pi->core, PCIEREGOFFS(mdiodata), mdiodata);
|
|
|
|
pr28829_delay();
|
|
/* retry till the transaction is complete */
|
|
while (i < pcie_serdes_spinwait) {
|
|
if (bcma_read32(pi->core, PCIEREGOFFS(mdiocontrol)) &
|
|
MDIOCTL_ACCESS_DONE)
|
|
break;
|
|
|
|
udelay(1000);
|
|
i++;
|
|
}
|
|
|
|
if (i >= pcie_serdes_spinwait)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int
|
|
pcie_mdioop(struct pcicore_info *pi, uint physmedia, uint regaddr, bool write,
|
|
uint *val)
|
|
{
|
|
uint mdiodata;
|
|
uint i = 0;
|
|
uint pcie_serdes_spinwait = 10;
|
|
|
|
/* enable mdio access to SERDES */
|
|
bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol),
|
|
MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL);
|
|
|
|
if (ai_get_buscorerev(pi->sih) >= 10) {
|
|
/* new serdes is slower in rw,
|
|
* using two layers of reg address mapping
|
|
*/
|
|
if (!pcie_mdiosetblock(pi, physmedia))
|
|
return 1;
|
|
mdiodata = ((MDIODATA_DEV_ADDR << MDIODATA_DEVADDR_SHF) |
|
|
(regaddr << MDIODATA_REGADDR_SHF));
|
|
pcie_serdes_spinwait *= 20;
|
|
} else {
|
|
mdiodata = ((physmedia << MDIODATA_DEVADDR_SHF_OLD) |
|
|
(regaddr << MDIODATA_REGADDR_SHF_OLD));
|
|
}
|
|
|
|
if (!write)
|
|
mdiodata |= (MDIODATA_START | MDIODATA_READ | MDIODATA_TA);
|
|
else
|
|
mdiodata |= (MDIODATA_START | MDIODATA_WRITE | MDIODATA_TA |
|
|
*val);
|
|
|
|
bcma_write32(pi->core, PCIEREGOFFS(mdiodata), mdiodata);
|
|
|
|
pr28829_delay();
|
|
|
|
/* retry till the transaction is complete */
|
|
while (i < pcie_serdes_spinwait) {
|
|
if (bcma_read32(pi->core, PCIEREGOFFS(mdiocontrol)) &
|
|
MDIOCTL_ACCESS_DONE) {
|
|
if (!write) {
|
|
pr28829_delay();
|
|
*val = (bcma_read32(pi->core,
|
|
PCIEREGOFFS(mdiodata)) &
|
|
MDIODATA_MASK);
|
|
}
|
|
/* Disable mdio access to SERDES */
|
|
bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), 0);
|
|
return 0;
|
|
}
|
|
udelay(1000);
|
|
i++;
|
|
}
|
|
|
|
/* Timed out. Disable mdio access to SERDES. */
|
|
bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), 0);
|
|
return 1;
|
|
}
|
|
|
|
/* use the mdio interface to read from mdio slaves */
|
|
static int
|
|
pcie_mdioread(struct pcicore_info *pi, uint physmedia, uint regaddr,
|
|
uint *regval)
|
|
{
|
|
return pcie_mdioop(pi, physmedia, regaddr, false, regval);
|
|
}
|
|
|
|
/* use the mdio interface to write to mdio slaves */
|
|
static int
|
|
pcie_mdiowrite(struct pcicore_info *pi, uint physmedia, uint regaddr, uint val)
|
|
{
|
|
return pcie_mdioop(pi, physmedia, regaddr, true, &val);
|
|
}
|
|
|
|
/* ***** Support functions ***** */
|
|
static u8 pcie_clkreq(struct pcicore_info *pi, u32 mask, u32 val)
|
|
{
|
|
u32 reg_val;
|
|
u8 offset;
|
|
|
|
offset = pi->pciecap_lcreg_offset;
|
|
if (!offset)
|
|
return 0;
|
|
|
|
pci_read_config_dword(pi->dev, offset, ®_val);
|
|
/* set operation */
|
|
if (mask) {
|
|
if (val)
|
|
reg_val |= PCIE_CLKREQ_ENAB;
|
|
else
|
|
reg_val &= ~PCIE_CLKREQ_ENAB;
|
|
pci_write_config_dword(pi->dev, offset, reg_val);
|
|
pci_read_config_dword(pi->dev, offset, ®_val);
|
|
}
|
|
if (reg_val & PCIE_CLKREQ_ENAB)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static void pcie_extendL1timer(struct pcicore_info *pi, bool extend)
|
|
{
|
|
u32 w;
|
|
struct si_pub *sih = pi->sih;
|
|
|
|
if (ai_get_buscoretype(sih) != PCIE_CORE_ID ||
|
|
ai_get_buscorerev(sih) < 7)
|
|
return;
|
|
|
|
w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG);
|
|
if (extend)
|
|
w |= PCIE_ASPMTIMER_EXTEND;
|
|
else
|
|
w &= ~PCIE_ASPMTIMER_EXTEND;
|
|
pcie_writereg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG, w);
|
|
w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG);
|
|
}
|
|
|
|
/* centralized clkreq control policy */
|
|
static void pcie_clkreq_upd(struct pcicore_info *pi, uint state)
|
|
{
|
|
struct si_pub *sih = pi->sih;
|
|
|
|
switch (state) {
|
|
case SI_DOATTACH:
|
|
if (PCIE_ASPM(sih))
|
|
pcie_clkreq(pi, 1, 0);
|
|
break;
|
|
case SI_PCIDOWN:
|
|
/* turn on serdes PLL down */
|
|
if (ai_get_buscorerev(sih) == 6) {
|
|
ai_cc_reg(sih,
|
|
offsetof(struct chipcregs, chipcontrol_addr),
|
|
~0, 0);
|
|
ai_cc_reg(sih,
|
|
offsetof(struct chipcregs, chipcontrol_data),
|
|
~0x40, 0);
|
|
} else if (pi->pcie_pr42767) {
|
|
pcie_clkreq(pi, 1, 1);
|
|
}
|
|
break;
|
|
case SI_PCIUP:
|
|
/* turn off serdes PLL down */
|
|
if (ai_get_buscorerev(sih) == 6) {
|
|
ai_cc_reg(sih,
|
|
offsetof(struct chipcregs, chipcontrol_addr),
|
|
~0, 0);
|
|
ai_cc_reg(sih,
|
|
offsetof(struct chipcregs, chipcontrol_data),
|
|
~0x40, 0x40);
|
|
} else if (PCIE_ASPM(sih)) { /* disable clkreq */
|
|
pcie_clkreq(pi, 1, 0);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* ***** PCI core WARs ***** */
|
|
/* Done only once at attach time */
|
|
static void pcie_war_polarity(struct pcicore_info *pi)
|
|
{
|
|
u32 w;
|
|
|
|
if (pi->pcie_polarity != 0)
|
|
return;
|
|
|
|
w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_PLP_STATUSREG);
|
|
|
|
/* Detect the current polarity at attach and force that polarity and
|
|
* disable changing the polarity
|
|
*/
|
|
if ((w & PCIE_PLP_POLARITYINV_STAT) == 0)
|
|
pi->pcie_polarity = SERDES_RX_CTRL_FORCE;
|
|
else
|
|
pi->pcie_polarity = (SERDES_RX_CTRL_FORCE |
|
|
SERDES_RX_CTRL_POLARITY);
|
|
}
|
|
|
|
/* enable ASPM and CLKREQ if srom doesn't have it */
|
|
/* Needs to happen when update to shadow SROM is needed
|
|
* : Coming out of 'standby'/'hibernate'
|
|
* : If pcie_war_aspm_ovr state changed
|
|
*/
|
|
static void pcie_war_aspm_clkreq(struct pcicore_info *pi)
|
|
{
|
|
struct si_pub *sih = pi->sih;
|
|
u16 val16;
|
|
u32 w;
|
|
|
|
if (!PCIE_ASPM(sih))
|
|
return;
|
|
|
|
/* bypass this on QT or VSIM */
|
|
val16 = bcma_read16(pi->core, PCIEREGOFFS(sprom[SRSH_ASPM_OFFSET]));
|
|
|
|
val16 &= ~SRSH_ASPM_ENB;
|
|
if (pi->pcie_war_aspm_ovr == PCIE_ASPM_ENAB)
|
|
val16 |= SRSH_ASPM_ENB;
|
|
else if (pi->pcie_war_aspm_ovr == PCIE_ASPM_L1_ENAB)
|
|
val16 |= SRSH_ASPM_L1_ENB;
|
|
else if (pi->pcie_war_aspm_ovr == PCIE_ASPM_L0s_ENAB)
|
|
val16 |= SRSH_ASPM_L0s_ENB;
|
|
|
|
bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_ASPM_OFFSET]), val16);
|
|
|
|
pci_read_config_dword(pi->dev, pi->pciecap_lcreg_offset, &w);
|
|
w &= ~PCIE_ASPM_ENAB;
|
|
w |= pi->pcie_war_aspm_ovr;
|
|
pci_write_config_dword(pi->dev, pi->pciecap_lcreg_offset, w);
|
|
|
|
val16 = bcma_read16(pi->core,
|
|
PCIEREGOFFS(sprom[SRSH_CLKREQ_OFFSET_REV5]));
|
|
|
|
if (pi->pcie_war_aspm_ovr != PCIE_ASPM_DISAB) {
|
|
val16 |= SRSH_CLKREQ_ENB;
|
|
pi->pcie_pr42767 = true;
|
|
} else
|
|
val16 &= ~SRSH_CLKREQ_ENB;
|
|
|
|
bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_CLKREQ_OFFSET_REV5]),
|
|
val16);
|
|
}
|
|
|
|
/* Apply the polarity determined at the start */
|
|
/* Needs to happen when coming out of 'standby'/'hibernate' */
|
|
static void pcie_war_serdes(struct pcicore_info *pi)
|
|
{
|
|
u32 w = 0;
|
|
|
|
if (pi->pcie_polarity != 0)
|
|
pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CTRL,
|
|
pi->pcie_polarity);
|
|
|
|
pcie_mdioread(pi, MDIODATA_DEV_PLL, SERDES_PLL_CTRL, &w);
|
|
if (w & PLL_CTRL_FREQDET_EN) {
|
|
w &= ~PLL_CTRL_FREQDET_EN;
|
|
pcie_mdiowrite(pi, MDIODATA_DEV_PLL, SERDES_PLL_CTRL, w);
|
|
}
|
|
}
|
|
|
|
/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */
|
|
/* Needs to happen when coming out of 'standby'/'hibernate' */
|
|
static void pcie_misc_config_fixup(struct pcicore_info *pi)
|
|
{
|
|
u16 val16;
|
|
|
|
val16 = bcma_read16(pi->core,
|
|
PCIEREGOFFS(sprom[SRSH_PCIE_MISC_CONFIG]));
|
|
|
|
if ((val16 & SRSH_L23READY_EXIT_NOPERST) == 0) {
|
|
val16 |= SRSH_L23READY_EXIT_NOPERST;
|
|
bcma_write16(pi->core,
|
|
PCIEREGOFFS(sprom[SRSH_PCIE_MISC_CONFIG]), val16);
|
|
}
|
|
}
|
|
|
|
/* quick hack for testing */
|
|
/* Needs to happen when coming out of 'standby'/'hibernate' */
|
|
static void pcie_war_noplldown(struct pcicore_info *pi)
|
|
{
|
|
/* turn off serdes PLL down */
|
|
ai_cc_reg(pi->sih, offsetof(struct chipcregs, chipcontrol),
|
|
CHIPCTRL_4321_PLL_DOWN, CHIPCTRL_4321_PLL_DOWN);
|
|
|
|
/* clear srom shadow backdoor */
|
|
bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_BD_OFFSET]), 0);
|
|
}
|
|
|
|
/* Needs to happen when coming out of 'standby'/'hibernate' */
|
|
static void pcie_war_pci_setup(struct pcicore_info *pi)
|
|
{
|
|
struct si_pub *sih = pi->sih;
|
|
u32 w;
|
|
|
|
if (ai_get_buscorerev(sih) == 0 || ai_get_buscorerev(sih) == 1) {
|
|
w = pcie_readreg(pi->core, PCIE_PCIEREGS,
|
|
PCIE_TLP_WORKAROUNDSREG);
|
|
w |= 0x8;
|
|
pcie_writereg(pi->core, PCIE_PCIEREGS,
|
|
PCIE_TLP_WORKAROUNDSREG, w);
|
|
}
|
|
|
|
if (ai_get_buscorerev(sih) == 1) {
|
|
w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_LCREG);
|
|
w |= 0x40;
|
|
pcie_writereg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_LCREG, w);
|
|
}
|
|
|
|
if (ai_get_buscorerev(sih) == 0) {
|
|
pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128);
|
|
pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100);
|
|
pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466);
|
|
} else if (PCIE_ASPM(sih)) {
|
|
/* Change the L1 threshold for better performance */
|
|
w = pcie_readreg(pi->core, PCIE_PCIEREGS,
|
|
PCIE_DLLP_PMTHRESHREG);
|
|
w &= ~PCIE_L1THRESHOLDTIME_MASK;
|
|
w |= PCIE_L1THRESHOLD_WARVAL << PCIE_L1THRESHOLDTIME_SHIFT;
|
|
pcie_writereg(pi->core, PCIE_PCIEREGS,
|
|
PCIE_DLLP_PMTHRESHREG, w);
|
|
|
|
pcie_war_serdes(pi);
|
|
|
|
pcie_war_aspm_clkreq(pi);
|
|
} else if (ai_get_buscorerev(pi->sih) == 7)
|
|
pcie_war_noplldown(pi);
|
|
|
|
/* Note that the fix is actually in the SROM,
|
|
* that's why this is open-ended
|
|
*/
|
|
if (ai_get_buscorerev(pi->sih) >= 6)
|
|
pcie_misc_config_fixup(pi);
|
|
}
|
|
|
|
/* ***** Functions called during driver state changes ***** */
|
|
void pcicore_attach(struct pcicore_info *pi, int state)
|
|
{
|
|
struct si_pub *sih = pi->sih;
|
|
u32 bfl2 = (u32)getintvar(sih, BRCMS_SROM_BOARDFLAGS2);
|
|
|
|
/* Determine if this board needs override */
|
|
if (PCIE_ASPM(sih)) {
|
|
if (bfl2 & BFL2_PCIEWAR_OVR)
|
|
pi->pcie_war_aspm_ovr = PCIE_ASPM_DISAB;
|
|
else
|
|
pi->pcie_war_aspm_ovr = PCIE_ASPM_ENAB;
|
|
}
|
|
|
|
/* These need to happen in this order only */
|
|
pcie_war_polarity(pi);
|
|
|
|
pcie_war_serdes(pi);
|
|
|
|
pcie_war_aspm_clkreq(pi);
|
|
|
|
pcie_clkreq_upd(pi, state);
|
|
|
|
}
|
|
|
|
void pcicore_hwup(struct pcicore_info *pi)
|
|
{
|
|
if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID)
|
|
return;
|
|
|
|
pcie_war_pci_setup(pi);
|
|
}
|
|
|
|
void pcicore_up(struct pcicore_info *pi, int state)
|
|
{
|
|
if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID)
|
|
return;
|
|
|
|
/* Restore L1 timer for better performance */
|
|
pcie_extendL1timer(pi, true);
|
|
|
|
pcie_clkreq_upd(pi, state);
|
|
}
|
|
|
|
/* When the device is going to enter D3 state
|
|
* (or the system is going to enter S3/S4 states)
|
|
*/
|
|
void pcicore_sleep(struct pcicore_info *pi)
|
|
{
|
|
u32 w;
|
|
|
|
if (!pi || !PCIE_ASPM(pi->sih))
|
|
return;
|
|
|
|
pci_read_config_dword(pi->dev, pi->pciecap_lcreg_offset, &w);
|
|
w &= ~PCIE_CAP_LCREG_ASPML1;
|
|
pci_write_config_dword(pi->dev, pi->pciecap_lcreg_offset, w);
|
|
|
|
pi->pcie_pr42767 = false;
|
|
}
|
|
|
|
void pcicore_down(struct pcicore_info *pi, int state)
|
|
{
|
|
if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID)
|
|
return;
|
|
|
|
pcie_clkreq_upd(pi, state);
|
|
|
|
/* Reduce L1 timer for better power savings */
|
|
pcie_extendL1timer(pi, false);
|
|
}
|
|
|
|
void pcicore_fixcfg(struct pcicore_info *pi)
|
|
{
|
|
struct bcma_device *core = pi->core;
|
|
u16 val16;
|
|
uint regoff;
|
|
|
|
switch (pi->core->id.id) {
|
|
case BCMA_CORE_PCI:
|
|
regoff = PCIREGOFFS(sprom[SRSH_PI_OFFSET]);
|
|
break;
|
|
|
|
case BCMA_CORE_PCIE:
|
|
regoff = PCIEREGOFFS(sprom[SRSH_PI_OFFSET]);
|
|
break;
|
|
|
|
default:
|
|
return;
|
|
}
|
|
|
|
val16 = bcma_read16(pi->core, regoff);
|
|
if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) !=
|
|
(u16)core->core_index) {
|
|
val16 = ((u16)core->core_index << SRSH_PI_SHIFT) |
|
|
(val16 & ~SRSH_PI_MASK);
|
|
bcma_write16(pi->core, regoff, val16);
|
|
}
|
|
}
|
|
|
|
/* precondition: current core is pci core */
|
|
void
|
|
pcicore_pci_setup(struct pcicore_info *pi)
|
|
{
|
|
bcma_set32(pi->core, PCIREGOFFS(sbtopci2),
|
|
SBTOPCI_PREF | SBTOPCI_BURST);
|
|
|
|
if (pi->core->id.rev >= 11) {
|
|
bcma_set32(pi->core, PCIREGOFFS(sbtopci2),
|
|
SBTOPCI_RC_READMULTI);
|
|
bcma_set32(pi->core, PCIREGOFFS(clkrun), PCI_CLKRUN_DSBL);
|
|
(void)bcma_read32(pi->core, PCIREGOFFS(clkrun));
|
|
}
|
|
}
|