mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 23:26:45 +07:00
689be43945
Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005 lines
55 KiB
C
2005 lines
55 KiB
C
/*
|
|
Written 1998-2000 by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms of
|
|
the GNU General Public License (GPL), incorporated herein by reference.
|
|
Drivers based on or derived from this code fall under the GPL and must
|
|
retain the authorship, copyright and license notice. This file is not
|
|
a complete program and may only be used when the entire operating
|
|
system is licensed under the GPL.
|
|
|
|
The author may be reached as becker@scyld.com, or C/O
|
|
Scyld Computing Corporation
|
|
410 Severn Ave., Suite 210
|
|
Annapolis MD 21403
|
|
|
|
Support information and updates available at
|
|
http://www.scyld.com/network/pci-skeleton.html
|
|
|
|
Linux kernel updates:
|
|
|
|
Version 2.51, Nov 17, 2001 (jgarzik):
|
|
- Add ethtool support
|
|
- Replace some MII-related magic numbers with constants
|
|
|
|
*/
|
|
|
|
#define DRV_NAME "fealnx"
|
|
#define DRV_VERSION "2.51"
|
|
#define DRV_RELDATE "Nov-17-2001"
|
|
|
|
static int debug; /* 1-> print debug message */
|
|
static int max_interrupt_work = 20;
|
|
|
|
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). */
|
|
static int multicast_filter_limit = 32;
|
|
|
|
/* Set the copy breakpoint for the copy-only-tiny-frames scheme. */
|
|
/* Setting to > 1518 effectively disables this feature. */
|
|
static int rx_copybreak;
|
|
|
|
/* Used to pass the media type, etc. */
|
|
/* Both 'options[]' and 'full_duplex[]' should exist for driver */
|
|
/* interoperability. */
|
|
/* The media type is usually passed in 'options[]'. */
|
|
#define MAX_UNITS 8 /* More are supported, limit only on options */
|
|
static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
|
|
static int full_duplex[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
|
|
|
|
/* Operational parameters that are set at compile time. */
|
|
/* Keep the ring sizes a power of two for compile efficiency. */
|
|
/* The compiler will convert <unsigned>'%'<2^N> into a bit mask. */
|
|
/* Making the Tx ring too large decreases the effectiveness of channel */
|
|
/* bonding and packet priority. */
|
|
/* There are no ill effects from too-large receive rings. */
|
|
// 88-12-9 modify,
|
|
// #define TX_RING_SIZE 16
|
|
// #define RX_RING_SIZE 32
|
|
#define TX_RING_SIZE 6
|
|
#define RX_RING_SIZE 12
|
|
#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct fealnx_desc)
|
|
#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct fealnx_desc)
|
|
|
|
/* Operational parameters that usually are not changed. */
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (2*HZ)
|
|
|
|
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */
|
|
|
|
|
|
/* Include files, designed to support most kernel versions 2.0.0 and later. */
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/processor.h> /* Processor type for cache alignment. */
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
/* These identify the driver base version and may not be removed. */
|
|
static char version[] __devinitdata =
|
|
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE "\n";
|
|
|
|
|
|
/* This driver was written to use PCI memory space, however some x86 systems
|
|
work only with I/O space accesses. */
|
|
#ifndef __alpha__
|
|
#define USE_IO_OPS
|
|
#endif
|
|
|
|
/* Kernel compatibility defines, some common to David Hinds' PCMCIA package. */
|
|
/* This is only in the support-all-kernels source code. */
|
|
|
|
#define RUN_AT(x) (jiffies + (x))
|
|
|
|
MODULE_AUTHOR("Myson or whoever");
|
|
MODULE_DESCRIPTION("Myson MTD-8xx 100/10M Ethernet PCI Adapter Driver");
|
|
MODULE_LICENSE("GPL");
|
|
module_param(max_interrupt_work, int, 0);
|
|
//MODULE_PARM(min_pci_latency, "i");
|
|
module_param(debug, int, 0);
|
|
module_param(rx_copybreak, int, 0);
|
|
module_param(multicast_filter_limit, int, 0);
|
|
module_param_array(options, int, NULL, 0);
|
|
module_param_array(full_duplex, int, NULL, 0);
|
|
MODULE_PARM_DESC(max_interrupt_work, "fealnx maximum events handled per interrupt");
|
|
MODULE_PARM_DESC(debug, "fealnx enable debugging (0-1)");
|
|
MODULE_PARM_DESC(rx_copybreak, "fealnx copy breakpoint for copy-only-tiny-frames");
|
|
MODULE_PARM_DESC(multicast_filter_limit, "fealnx maximum number of filtered multicast addresses");
|
|
MODULE_PARM_DESC(options, "fealnx: Bits 0-3: media type, bit 17: full duplex");
|
|
MODULE_PARM_DESC(full_duplex, "fealnx full duplex setting(s) (1)");
|
|
|
|
#define MIN_REGION_SIZE 136
|
|
|
|
enum pci_flags_bit {
|
|
PCI_USES_IO = 1,
|
|
PCI_USES_MEM = 2,
|
|
PCI_USES_MASTER = 4,
|
|
PCI_ADDR0 = 0x10 << 0,
|
|
PCI_ADDR1 = 0x10 << 1,
|
|
PCI_ADDR2 = 0x10 << 2,
|
|
PCI_ADDR3 = 0x10 << 3,
|
|
};
|
|
|
|
/* A chip capabilities table, matching the entries in pci_tbl[] above. */
|
|
enum chip_capability_flags {
|
|
HAS_MII_XCVR,
|
|
HAS_CHIP_XCVR,
|
|
};
|
|
|
|
/* 89/6/13 add, */
|
|
/* for different PHY */
|
|
enum phy_type_flags {
|
|
MysonPHY = 1,
|
|
AhdocPHY = 2,
|
|
SeeqPHY = 3,
|
|
MarvellPHY = 4,
|
|
Myson981 = 5,
|
|
LevelOnePHY = 6,
|
|
OtherPHY = 10,
|
|
};
|
|
|
|
struct chip_info {
|
|
char *chip_name;
|
|
int io_size;
|
|
int flags;
|
|
};
|
|
|
|
static struct chip_info skel_netdrv_tbl[] = {
|
|
{"100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR},
|
|
{"100/10M Ethernet PCI Adapter", 136, HAS_CHIP_XCVR},
|
|
{"1000/100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR},
|
|
};
|
|
|
|
/* Offsets to the Command and Status Registers. */
|
|
enum fealnx_offsets {
|
|
PAR0 = 0x0, /* physical address 0-3 */
|
|
PAR1 = 0x04, /* physical address 4-5 */
|
|
MAR0 = 0x08, /* multicast address 0-3 */
|
|
MAR1 = 0x0C, /* multicast address 4-7 */
|
|
FAR0 = 0x10, /* flow-control address 0-3 */
|
|
FAR1 = 0x14, /* flow-control address 4-5 */
|
|
TCRRCR = 0x18, /* receive & transmit configuration */
|
|
BCR = 0x1C, /* bus command */
|
|
TXPDR = 0x20, /* transmit polling demand */
|
|
RXPDR = 0x24, /* receive polling demand */
|
|
RXCWP = 0x28, /* receive current word pointer */
|
|
TXLBA = 0x2C, /* transmit list base address */
|
|
RXLBA = 0x30, /* receive list base address */
|
|
ISR = 0x34, /* interrupt status */
|
|
IMR = 0x38, /* interrupt mask */
|
|
FTH = 0x3C, /* flow control high/low threshold */
|
|
MANAGEMENT = 0x40, /* bootrom/eeprom and mii management */
|
|
TALLY = 0x44, /* tally counters for crc and mpa */
|
|
TSR = 0x48, /* tally counter for transmit status */
|
|
BMCRSR = 0x4c, /* basic mode control and status */
|
|
PHYIDENTIFIER = 0x50, /* phy identifier */
|
|
ANARANLPAR = 0x54, /* auto-negotiation advertisement and link
|
|
partner ability */
|
|
ANEROCR = 0x58, /* auto-negotiation expansion and pci conf. */
|
|
BPREMRPSR = 0x5c, /* bypass & receive error mask and phy status */
|
|
};
|
|
|
|
/* Bits in the interrupt status/enable registers. */
|
|
/* The bits in the Intr Status/Enable registers, mostly interrupt sources. */
|
|
enum intr_status_bits {
|
|
RFCON = 0x00020000, /* receive flow control xon packet */
|
|
RFCOFF = 0x00010000, /* receive flow control xoff packet */
|
|
LSCStatus = 0x00008000, /* link status change */
|
|
ANCStatus = 0x00004000, /* autonegotiation completed */
|
|
FBE = 0x00002000, /* fatal bus error */
|
|
FBEMask = 0x00001800, /* mask bit12-11 */
|
|
ParityErr = 0x00000000, /* parity error */
|
|
TargetErr = 0x00001000, /* target abort */
|
|
MasterErr = 0x00000800, /* master error */
|
|
TUNF = 0x00000400, /* transmit underflow */
|
|
ROVF = 0x00000200, /* receive overflow */
|
|
ETI = 0x00000100, /* transmit early int */
|
|
ERI = 0x00000080, /* receive early int */
|
|
CNTOVF = 0x00000040, /* counter overflow */
|
|
RBU = 0x00000020, /* receive buffer unavailable */
|
|
TBU = 0x00000010, /* transmit buffer unavilable */
|
|
TI = 0x00000008, /* transmit interrupt */
|
|
RI = 0x00000004, /* receive interrupt */
|
|
RxErr = 0x00000002, /* receive error */
|
|
};
|
|
|
|
/* Bits in the NetworkConfig register, W for writing, R for reading */
|
|
/* FIXME: some names are invented by me. Marked with (name?) */
|
|
/* If you have docs and know bit names, please fix 'em */
|
|
enum rx_mode_bits {
|
|
CR_W_ENH = 0x02000000, /* enhanced mode (name?) */
|
|
CR_W_FD = 0x00100000, /* full duplex */
|
|
CR_W_PS10 = 0x00080000, /* 10 mbit */
|
|
CR_W_TXEN = 0x00040000, /* tx enable (name?) */
|
|
CR_W_PS1000 = 0x00010000, /* 1000 mbit */
|
|
/* CR_W_RXBURSTMASK= 0x00000e00, Im unsure about this */
|
|
CR_W_RXMODEMASK = 0x000000e0,
|
|
CR_W_PROM = 0x00000080, /* promiscuous mode */
|
|
CR_W_AB = 0x00000040, /* accept broadcast */
|
|
CR_W_AM = 0x00000020, /* accept mutlicast */
|
|
CR_W_ARP = 0x00000008, /* receive runt pkt */
|
|
CR_W_ALP = 0x00000004, /* receive long pkt */
|
|
CR_W_SEP = 0x00000002, /* receive error pkt */
|
|
CR_W_RXEN = 0x00000001, /* rx enable (unicast?) (name?) */
|
|
|
|
CR_R_TXSTOP = 0x04000000, /* tx stopped (name?) */
|
|
CR_R_FD = 0x00100000, /* full duplex detected */
|
|
CR_R_PS10 = 0x00080000, /* 10 mbit detected */
|
|
CR_R_RXSTOP = 0x00008000, /* rx stopped (name?) */
|
|
};
|
|
|
|
/* The Tulip Rx and Tx buffer descriptors. */
|
|
struct fealnx_desc {
|
|
s32 status;
|
|
s32 control;
|
|
u32 buffer;
|
|
u32 next_desc;
|
|
struct fealnx_desc *next_desc_logical;
|
|
struct sk_buff *skbuff;
|
|
u32 reserved1;
|
|
u32 reserved2;
|
|
};
|
|
|
|
/* Bits in network_desc.status */
|
|
enum rx_desc_status_bits {
|
|
RXOWN = 0x80000000, /* own bit */
|
|
FLNGMASK = 0x0fff0000, /* frame length */
|
|
FLNGShift = 16,
|
|
MARSTATUS = 0x00004000, /* multicast address received */
|
|
BARSTATUS = 0x00002000, /* broadcast address received */
|
|
PHYSTATUS = 0x00001000, /* physical address received */
|
|
RXFSD = 0x00000800, /* first descriptor */
|
|
RXLSD = 0x00000400, /* last descriptor */
|
|
ErrorSummary = 0x80, /* error summary */
|
|
RUNT = 0x40, /* runt packet received */
|
|
LONG = 0x20, /* long packet received */
|
|
FAE = 0x10, /* frame align error */
|
|
CRC = 0x08, /* crc error */
|
|
RXER = 0x04, /* receive error */
|
|
};
|
|
|
|
enum rx_desc_control_bits {
|
|
RXIC = 0x00800000, /* interrupt control */
|
|
RBSShift = 0,
|
|
};
|
|
|
|
enum tx_desc_status_bits {
|
|
TXOWN = 0x80000000, /* own bit */
|
|
JABTO = 0x00004000, /* jabber timeout */
|
|
CSL = 0x00002000, /* carrier sense lost */
|
|
LC = 0x00001000, /* late collision */
|
|
EC = 0x00000800, /* excessive collision */
|
|
UDF = 0x00000400, /* fifo underflow */
|
|
DFR = 0x00000200, /* deferred */
|
|
HF = 0x00000100, /* heartbeat fail */
|
|
NCRMask = 0x000000ff, /* collision retry count */
|
|
NCRShift = 0,
|
|
};
|
|
|
|
enum tx_desc_control_bits {
|
|
TXIC = 0x80000000, /* interrupt control */
|
|
ETIControl = 0x40000000, /* early transmit interrupt */
|
|
TXLD = 0x20000000, /* last descriptor */
|
|
TXFD = 0x10000000, /* first descriptor */
|
|
CRCEnable = 0x08000000, /* crc control */
|
|
PADEnable = 0x04000000, /* padding control */
|
|
RetryTxLC = 0x02000000, /* retry late collision */
|
|
PKTSMask = 0x3ff800, /* packet size bit21-11 */
|
|
PKTSShift = 11,
|
|
TBSMask = 0x000007ff, /* transmit buffer bit 10-0 */
|
|
TBSShift = 0,
|
|
};
|
|
|
|
/* BootROM/EEPROM/MII Management Register */
|
|
#define MASK_MIIR_MII_READ 0x00000000
|
|
#define MASK_MIIR_MII_WRITE 0x00000008
|
|
#define MASK_MIIR_MII_MDO 0x00000004
|
|
#define MASK_MIIR_MII_MDI 0x00000002
|
|
#define MASK_MIIR_MII_MDC 0x00000001
|
|
|
|
/* ST+OP+PHYAD+REGAD+TA */
|
|
#define OP_READ 0x6000 /* ST:01+OP:10+PHYAD+REGAD+TA:Z0 */
|
|
#define OP_WRITE 0x5002 /* ST:01+OP:01+PHYAD+REGAD+TA:10 */
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/* Constants for Myson PHY */
|
|
/* ------------------------------------------------------------------------- */
|
|
#define MysonPHYID 0xd0000302
|
|
/* 89-7-27 add, (begin) */
|
|
#define MysonPHYID0 0x0302
|
|
#define StatusRegister 18
|
|
#define SPEED100 0x0400 // bit10
|
|
#define FULLMODE 0x0800 // bit11
|
|
/* 89-7-27 add, (end) */
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/* Constants for Seeq 80225 PHY */
|
|
/* ------------------------------------------------------------------------- */
|
|
#define SeeqPHYID0 0x0016
|
|
|
|
#define MIIRegister18 18
|
|
#define SPD_DET_100 0x80
|
|
#define DPLX_DET_FULL 0x40
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/* Constants for Ahdoc 101 PHY */
|
|
/* ------------------------------------------------------------------------- */
|
|
#define AhdocPHYID0 0x0022
|
|
|
|
#define DiagnosticReg 18
|
|
#define DPLX_FULL 0x0800
|
|
#define Speed_100 0x0400
|
|
|
|
/* 89/6/13 add, */
|
|
/* -------------------------------------------------------------------------- */
|
|
/* Constants */
|
|
/* -------------------------------------------------------------------------- */
|
|
#define MarvellPHYID0 0x0141
|
|
#define LevelOnePHYID0 0x0013
|
|
|
|
#define MII1000BaseTControlReg 9
|
|
#define MII1000BaseTStatusReg 10
|
|
#define SpecificReg 17
|
|
|
|
/* for 1000BaseT Control Register */
|
|
#define PHYAbletoPerform1000FullDuplex 0x0200
|
|
#define PHYAbletoPerform1000HalfDuplex 0x0100
|
|
#define PHY1000AbilityMask 0x300
|
|
|
|
// for phy specific status register, marvell phy.
|
|
#define SpeedMask 0x0c000
|
|
#define Speed_1000M 0x08000
|
|
#define Speed_100M 0x4000
|
|
#define Speed_10M 0
|
|
#define Full_Duplex 0x2000
|
|
|
|
// 89/12/29 add, for phy specific status register, levelone phy, (begin)
|
|
#define LXT1000_100M 0x08000
|
|
#define LXT1000_1000M 0x0c000
|
|
#define LXT1000_Full 0x200
|
|
// 89/12/29 add, for phy specific status register, levelone phy, (end)
|
|
|
|
/* for 3-in-1 case, BMCRSR register */
|
|
#define LinkIsUp2 0x00040000
|
|
|
|
/* for PHY */
|
|
#define LinkIsUp 0x0004
|
|
|
|
|
|
struct netdev_private {
|
|
/* Descriptor rings first for alignment. */
|
|
struct fealnx_desc *rx_ring;
|
|
struct fealnx_desc *tx_ring;
|
|
|
|
dma_addr_t rx_ring_dma;
|
|
dma_addr_t tx_ring_dma;
|
|
|
|
spinlock_t lock;
|
|
|
|
struct net_device_stats stats;
|
|
|
|
/* Media monitoring timer. */
|
|
struct timer_list timer;
|
|
|
|
/* Reset timer */
|
|
struct timer_list reset_timer;
|
|
int reset_timer_armed;
|
|
unsigned long crvalue_sv;
|
|
unsigned long imrvalue_sv;
|
|
|
|
/* Frequently used values: keep some adjacent for cache effect. */
|
|
int flags;
|
|
struct pci_dev *pci_dev;
|
|
unsigned long crvalue;
|
|
unsigned long bcrvalue;
|
|
unsigned long imrvalue;
|
|
struct fealnx_desc *cur_rx;
|
|
struct fealnx_desc *lack_rxbuf;
|
|
int really_rx_count;
|
|
struct fealnx_desc *cur_tx;
|
|
struct fealnx_desc *cur_tx_copy;
|
|
int really_tx_count;
|
|
int free_tx_count;
|
|
unsigned int rx_buf_sz; /* Based on MTU+slack. */
|
|
|
|
/* These values are keep track of the transceiver/media in use. */
|
|
unsigned int linkok;
|
|
unsigned int line_speed;
|
|
unsigned int duplexmode;
|
|
unsigned int default_port:4; /* Last dev->if_port value. */
|
|
unsigned int PHYType;
|
|
|
|
/* MII transceiver section. */
|
|
int mii_cnt; /* MII device addresses. */
|
|
unsigned char phys[2]; /* MII device addresses. */
|
|
struct mii_if_info mii;
|
|
void __iomem *mem;
|
|
};
|
|
|
|
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location);
|
|
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
|
|
static int netdev_open(struct net_device *dev);
|
|
static void getlinktype(struct net_device *dev);
|
|
static void getlinkstatus(struct net_device *dev);
|
|
static void netdev_timer(unsigned long data);
|
|
static void reset_timer(unsigned long data);
|
|
static void tx_timeout(struct net_device *dev);
|
|
static void init_ring(struct net_device *dev);
|
|
static int start_tx(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *regs);
|
|
static int netdev_rx(struct net_device *dev);
|
|
static void set_rx_mode(struct net_device *dev);
|
|
static void __set_rx_mode(struct net_device *dev);
|
|
static struct net_device_stats *get_stats(struct net_device *dev);
|
|
static int mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static struct ethtool_ops netdev_ethtool_ops;
|
|
static int netdev_close(struct net_device *dev);
|
|
static void reset_rx_descriptors(struct net_device *dev);
|
|
static void reset_tx_descriptors(struct net_device *dev);
|
|
|
|
static void stop_nic_rx(void __iomem *ioaddr, long crvalue)
|
|
{
|
|
int delay = 0x1000;
|
|
iowrite32(crvalue & ~(CR_W_RXEN), ioaddr + TCRRCR);
|
|
while (--delay) {
|
|
if ( (ioread32(ioaddr + TCRRCR) & CR_R_RXSTOP) == CR_R_RXSTOP)
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
static void stop_nic_rxtx(void __iomem *ioaddr, long crvalue)
|
|
{
|
|
int delay = 0x1000;
|
|
iowrite32(crvalue & ~(CR_W_RXEN+CR_W_TXEN), ioaddr + TCRRCR);
|
|
while (--delay) {
|
|
if ( (ioread32(ioaddr + TCRRCR) & (CR_R_RXSTOP+CR_R_TXSTOP))
|
|
== (CR_R_RXSTOP+CR_R_TXSTOP) )
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
static int __devinit fealnx_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct netdev_private *np;
|
|
int i, option, err, irq;
|
|
static int card_idx = -1;
|
|
char boardname[12];
|
|
void __iomem *ioaddr;
|
|
unsigned long len;
|
|
unsigned int chip_id = ent->driver_data;
|
|
struct net_device *dev;
|
|
void *ring_space;
|
|
dma_addr_t ring_dma;
|
|
#ifdef USE_IO_OPS
|
|
int bar = 0;
|
|
#else
|
|
int bar = 1;
|
|
#endif
|
|
|
|
/* when built into the kernel, we only print version if device is found */
|
|
#ifndef MODULE
|
|
static int printed_version;
|
|
if (!printed_version++)
|
|
printk(version);
|
|
#endif
|
|
|
|
card_idx++;
|
|
sprintf(boardname, "fealnx%d", card_idx);
|
|
|
|
option = card_idx < MAX_UNITS ? options[card_idx] : 0;
|
|
|
|
i = pci_enable_device(pdev);
|
|
if (i) return i;
|
|
pci_set_master(pdev);
|
|
|
|
len = pci_resource_len(pdev, bar);
|
|
if (len < MIN_REGION_SIZE) {
|
|
printk(KERN_ERR "%s: region size %ld too small, aborting\n",
|
|
boardname, len);
|
|
return -ENODEV;
|
|
}
|
|
|
|
i = pci_request_regions(pdev, boardname);
|
|
if (i) return i;
|
|
|
|
irq = pdev->irq;
|
|
|
|
ioaddr = pci_iomap(pdev, bar, len);
|
|
if (!ioaddr) {
|
|
err = -ENOMEM;
|
|
goto err_out_res;
|
|
}
|
|
|
|
dev = alloc_etherdev(sizeof(struct netdev_private));
|
|
if (!dev) {
|
|
err = -ENOMEM;
|
|
goto err_out_unmap;
|
|
}
|
|
SET_MODULE_OWNER(dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
/* read ethernet id */
|
|
for (i = 0; i < 6; ++i)
|
|
dev->dev_addr[i] = ioread8(ioaddr + PAR0 + i);
|
|
|
|
/* Reset the chip to erase previous misconfiguration. */
|
|
iowrite32(0x00000001, ioaddr + BCR);
|
|
|
|
dev->base_addr = (unsigned long)ioaddr;
|
|
dev->irq = irq;
|
|
|
|
/* Make certain the descriptor lists are aligned. */
|
|
np = netdev_priv(dev);
|
|
np->mem = ioaddr;
|
|
spin_lock_init(&np->lock);
|
|
np->pci_dev = pdev;
|
|
np->flags = skel_netdrv_tbl[chip_id].flags;
|
|
pci_set_drvdata(pdev, dev);
|
|
np->mii.dev = dev;
|
|
np->mii.mdio_read = mdio_read;
|
|
np->mii.mdio_write = mdio_write;
|
|
np->mii.phy_id_mask = 0x1f;
|
|
np->mii.reg_num_mask = 0x1f;
|
|
|
|
ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
|
|
if (!ring_space) {
|
|
err = -ENOMEM;
|
|
goto err_out_free_dev;
|
|
}
|
|
np->rx_ring = (struct fealnx_desc *)ring_space;
|
|
np->rx_ring_dma = ring_dma;
|
|
|
|
ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
|
|
if (!ring_space) {
|
|
err = -ENOMEM;
|
|
goto err_out_free_rx;
|
|
}
|
|
np->tx_ring = (struct fealnx_desc *)ring_space;
|
|
np->tx_ring_dma = ring_dma;
|
|
|
|
/* find the connected MII xcvrs */
|
|
if (np->flags == HAS_MII_XCVR) {
|
|
int phy, phy_idx = 0;
|
|
|
|
for (phy = 1; phy < 32 && phy_idx < 4; phy++) {
|
|
int mii_status = mdio_read(dev, phy, 1);
|
|
|
|
if (mii_status != 0xffff && mii_status != 0x0000) {
|
|
np->phys[phy_idx++] = phy;
|
|
printk(KERN_INFO
|
|
"%s: MII PHY found at address %d, status "
|
|
"0x%4.4x.\n", dev->name, phy, mii_status);
|
|
/* get phy type */
|
|
{
|
|
unsigned int data;
|
|
|
|
data = mdio_read(dev, np->phys[0], 2);
|
|
if (data == SeeqPHYID0)
|
|
np->PHYType = SeeqPHY;
|
|
else if (data == AhdocPHYID0)
|
|
np->PHYType = AhdocPHY;
|
|
else if (data == MarvellPHYID0)
|
|
np->PHYType = MarvellPHY;
|
|
else if (data == MysonPHYID0)
|
|
np->PHYType = Myson981;
|
|
else if (data == LevelOnePHYID0)
|
|
np->PHYType = LevelOnePHY;
|
|
else
|
|
np->PHYType = OtherPHY;
|
|
}
|
|
}
|
|
}
|
|
|
|
np->mii_cnt = phy_idx;
|
|
if (phy_idx == 0) {
|
|
printk(KERN_WARNING "%s: MII PHY not found -- this device may "
|
|
"not operate correctly.\n", dev->name);
|
|
}
|
|
} else {
|
|
np->phys[0] = 32;
|
|
/* 89/6/23 add, (begin) */
|
|
/* get phy type */
|
|
if (ioread32(ioaddr + PHYIDENTIFIER) == MysonPHYID)
|
|
np->PHYType = MysonPHY;
|
|
else
|
|
np->PHYType = OtherPHY;
|
|
}
|
|
np->mii.phy_id = np->phys[0];
|
|
|
|
if (dev->mem_start)
|
|
option = dev->mem_start;
|
|
|
|
/* The lower four bits are the media type. */
|
|
if (option > 0) {
|
|
if (option & 0x200)
|
|
np->mii.full_duplex = 1;
|
|
np->default_port = option & 15;
|
|
}
|
|
|
|
if (card_idx < MAX_UNITS && full_duplex[card_idx] > 0)
|
|
np->mii.full_duplex = full_duplex[card_idx];
|
|
|
|
if (np->mii.full_duplex) {
|
|
printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name);
|
|
/* 89/6/13 add, (begin) */
|
|
// if (np->PHYType==MarvellPHY)
|
|
if ((np->PHYType == MarvellPHY) || (np->PHYType == LevelOnePHY)) {
|
|
unsigned int data;
|
|
|
|
data = mdio_read(dev, np->phys[0], 9);
|
|
data = (data & 0xfcff) | 0x0200;
|
|
mdio_write(dev, np->phys[0], 9, data);
|
|
}
|
|
/* 89/6/13 add, (end) */
|
|
if (np->flags == HAS_MII_XCVR)
|
|
mdio_write(dev, np->phys[0], MII_ADVERTISE, ADVERTISE_FULL);
|
|
else
|
|
iowrite32(ADVERTISE_FULL, ioaddr + ANARANLPAR);
|
|
np->mii.force_media = 1;
|
|
}
|
|
|
|
/* The chip-specific entries in the device structure. */
|
|
dev->open = &netdev_open;
|
|
dev->hard_start_xmit = &start_tx;
|
|
dev->stop = &netdev_close;
|
|
dev->get_stats = &get_stats;
|
|
dev->set_multicast_list = &set_rx_mode;
|
|
dev->do_ioctl = &mii_ioctl;
|
|
dev->ethtool_ops = &netdev_ethtool_ops;
|
|
dev->tx_timeout = &tx_timeout;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto err_out_free_tx;
|
|
|
|
printk(KERN_INFO "%s: %s at %p, ",
|
|
dev->name, skel_netdrv_tbl[chip_id].chip_name, ioaddr);
|
|
for (i = 0; i < 5; i++)
|
|
printk("%2.2x:", dev->dev_addr[i]);
|
|
printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
|
|
|
|
return 0;
|
|
|
|
err_out_free_tx:
|
|
pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
|
|
err_out_free_rx:
|
|
pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
|
|
err_out_free_dev:
|
|
free_netdev(dev);
|
|
err_out_unmap:
|
|
pci_iounmap(pdev, ioaddr);
|
|
err_out_res:
|
|
pci_release_regions(pdev);
|
|
return err;
|
|
}
|
|
|
|
|
|
static void __devexit fealnx_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (dev) {
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
|
|
pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring,
|
|
np->tx_ring_dma);
|
|
pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring,
|
|
np->rx_ring_dma);
|
|
unregister_netdev(dev);
|
|
pci_iounmap(pdev, np->mem);
|
|
free_netdev(dev);
|
|
pci_release_regions(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
} else
|
|
printk(KERN_ERR "fealnx: remove for unknown device\n");
|
|
}
|
|
|
|
|
|
static ulong m80x_send_cmd_to_phy(void __iomem *miiport, int opcode, int phyad, int regad)
|
|
{
|
|
ulong miir;
|
|
int i;
|
|
unsigned int mask, data;
|
|
|
|
/* enable MII output */
|
|
miir = (ulong) ioread32(miiport);
|
|
miir &= 0xfffffff0;
|
|
|
|
miir |= MASK_MIIR_MII_WRITE + MASK_MIIR_MII_MDO;
|
|
|
|
/* send 32 1's preamble */
|
|
for (i = 0; i < 32; i++) {
|
|
/* low MDC; MDO is already high (miir) */
|
|
miir &= ~MASK_MIIR_MII_MDC;
|
|
iowrite32(miir, miiport);
|
|
|
|
/* high MDC */
|
|
miir |= MASK_MIIR_MII_MDC;
|
|
iowrite32(miir, miiport);
|
|
}
|
|
|
|
/* calculate ST+OP+PHYAD+REGAD+TA */
|
|
data = opcode | (phyad << 7) | (regad << 2);
|
|
|
|
/* sent out */
|
|
mask = 0x8000;
|
|
while (mask) {
|
|
/* low MDC, prepare MDO */
|
|
miir &= ~(MASK_MIIR_MII_MDC + MASK_MIIR_MII_MDO);
|
|
if (mask & data)
|
|
miir |= MASK_MIIR_MII_MDO;
|
|
|
|
iowrite32(miir, miiport);
|
|
/* high MDC */
|
|
miir |= MASK_MIIR_MII_MDC;
|
|
iowrite32(miir, miiport);
|
|
udelay(30);
|
|
|
|
/* next */
|
|
mask >>= 1;
|
|
if (mask == 0x2 && opcode == OP_READ)
|
|
miir &= ~MASK_MIIR_MII_WRITE;
|
|
}
|
|
return miir;
|
|
}
|
|
|
|
|
|
static int mdio_read(struct net_device *dev, int phyad, int regad)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *miiport = np->mem + MANAGEMENT;
|
|
ulong miir;
|
|
unsigned int mask, data;
|
|
|
|
miir = m80x_send_cmd_to_phy(miiport, OP_READ, phyad, regad);
|
|
|
|
/* read data */
|
|
mask = 0x8000;
|
|
data = 0;
|
|
while (mask) {
|
|
/* low MDC */
|
|
miir &= ~MASK_MIIR_MII_MDC;
|
|
iowrite32(miir, miiport);
|
|
|
|
/* read MDI */
|
|
miir = ioread32(miiport);
|
|
if (miir & MASK_MIIR_MII_MDI)
|
|
data |= mask;
|
|
|
|
/* high MDC, and wait */
|
|
miir |= MASK_MIIR_MII_MDC;
|
|
iowrite32(miir, miiport);
|
|
udelay(30);
|
|
|
|
/* next */
|
|
mask >>= 1;
|
|
}
|
|
|
|
/* low MDC */
|
|
miir &= ~MASK_MIIR_MII_MDC;
|
|
iowrite32(miir, miiport);
|
|
|
|
return data & 0xffff;
|
|
}
|
|
|
|
|
|
static void mdio_write(struct net_device *dev, int phyad, int regad, int data)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *miiport = np->mem + MANAGEMENT;
|
|
ulong miir;
|
|
unsigned int mask;
|
|
|
|
miir = m80x_send_cmd_to_phy(miiport, OP_WRITE, phyad, regad);
|
|
|
|
/* write data */
|
|
mask = 0x8000;
|
|
while (mask) {
|
|
/* low MDC, prepare MDO */
|
|
miir &= ~(MASK_MIIR_MII_MDC + MASK_MIIR_MII_MDO);
|
|
if (mask & data)
|
|
miir |= MASK_MIIR_MII_MDO;
|
|
iowrite32(miir, miiport);
|
|
|
|
/* high MDC */
|
|
miir |= MASK_MIIR_MII_MDC;
|
|
iowrite32(miir, miiport);
|
|
|
|
/* next */
|
|
mask >>= 1;
|
|
}
|
|
|
|
/* low MDC */
|
|
miir &= ~MASK_MIIR_MII_MDC;
|
|
iowrite32(miir, miiport);
|
|
}
|
|
|
|
|
|
static int netdev_open(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->mem;
|
|
int i;
|
|
|
|
iowrite32(0x00000001, ioaddr + BCR); /* Reset */
|
|
|
|
if (request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev))
|
|
return -EAGAIN;
|
|
|
|
for (i = 0; i < 3; i++)
|
|
iowrite16(((unsigned short*)dev->dev_addr)[i],
|
|
ioaddr + PAR0 + i*2);
|
|
|
|
init_ring(dev);
|
|
|
|
iowrite32(np->rx_ring_dma, ioaddr + RXLBA);
|
|
iowrite32(np->tx_ring_dma, ioaddr + TXLBA);
|
|
|
|
/* Initialize other registers. */
|
|
/* Configure the PCI bus bursts and FIFO thresholds.
|
|
486: Set 8 longword burst.
|
|
586: no burst limit.
|
|
Burst length 5:3
|
|
0 0 0 1
|
|
0 0 1 4
|
|
0 1 0 8
|
|
0 1 1 16
|
|
1 0 0 32
|
|
1 0 1 64
|
|
1 1 0 128
|
|
1 1 1 256
|
|
Wait the specified 50 PCI cycles after a reset by initializing
|
|
Tx and Rx queues and the address filter list.
|
|
FIXME (Ueimor): optimistic for alpha + posted writes ? */
|
|
#if defined(__powerpc__) || defined(__sparc__)
|
|
// 89/9/1 modify,
|
|
// np->bcrvalue=0x04 | 0x0x38; /* big-endian, 256 burst length */
|
|
np->bcrvalue = 0x04 | 0x10; /* big-endian, tx 8 burst length */
|
|
np->crvalue = 0xe00; /* rx 128 burst length */
|
|
#elif defined(__alpha__) || defined(__x86_64__)
|
|
// 89/9/1 modify,
|
|
// np->bcrvalue=0x38; /* little-endian, 256 burst length */
|
|
np->bcrvalue = 0x10; /* little-endian, 8 burst length */
|
|
np->crvalue = 0xe00; /* rx 128 burst length */
|
|
#elif defined(__i386__)
|
|
#if defined(MODULE)
|
|
// 89/9/1 modify,
|
|
// np->bcrvalue=0x38; /* little-endian, 256 burst length */
|
|
np->bcrvalue = 0x10; /* little-endian, 8 burst length */
|
|
np->crvalue = 0xe00; /* rx 128 burst length */
|
|
#else
|
|
/* When not a module we can work around broken '486 PCI boards. */
|
|
#define x86 boot_cpu_data.x86
|
|
// 89/9/1 modify,
|
|
// np->bcrvalue=(x86 <= 4 ? 0x10 : 0x38);
|
|
np->bcrvalue = 0x10;
|
|
np->crvalue = (x86 <= 4 ? 0xa00 : 0xe00);
|
|
if (x86 <= 4)
|
|
printk(KERN_INFO "%s: This is a 386/486 PCI system, setting burst "
|
|
"length to %x.\n", dev->name, (x86 <= 4 ? 0x10 : 0x38));
|
|
#endif
|
|
#else
|
|
// 89/9/1 modify,
|
|
// np->bcrvalue=0x38;
|
|
np->bcrvalue = 0x10;
|
|
np->crvalue = 0xe00; /* rx 128 burst length */
|
|
#warning Processor architecture undefined!
|
|
#endif
|
|
// 89/12/29 add,
|
|
// 90/1/16 modify,
|
|
// np->imrvalue=FBE|TUNF|CNTOVF|RBU|TI|RI;
|
|
np->imrvalue = TUNF | CNTOVF | RBU | TI | RI;
|
|
if (np->pci_dev->device == 0x891) {
|
|
np->bcrvalue |= 0x200; /* set PROG bit */
|
|
np->crvalue |= CR_W_ENH; /* set enhanced bit */
|
|
np->imrvalue |= ETI;
|
|
}
|
|
iowrite32(np->bcrvalue, ioaddr + BCR);
|
|
|
|
if (dev->if_port == 0)
|
|
dev->if_port = np->default_port;
|
|
|
|
iowrite32(0, ioaddr + RXPDR);
|
|
// 89/9/1 modify,
|
|
// np->crvalue = 0x00e40001; /* tx store and forward, tx/rx enable */
|
|
np->crvalue |= 0x00e40001; /* tx store and forward, tx/rx enable */
|
|
np->mii.full_duplex = np->mii.force_media;
|
|
getlinkstatus(dev);
|
|
if (np->linkok)
|
|
getlinktype(dev);
|
|
__set_rx_mode(dev);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
/* Clear and Enable interrupts by setting the interrupt mask. */
|
|
iowrite32(FBE | TUNF | CNTOVF | RBU | TI | RI, ioaddr + ISR);
|
|
iowrite32(np->imrvalue, ioaddr + IMR);
|
|
|
|
if (debug)
|
|
printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name);
|
|
|
|
/* Set the timer to check for link beat. */
|
|
init_timer(&np->timer);
|
|
np->timer.expires = RUN_AT(3 * HZ);
|
|
np->timer.data = (unsigned long) dev;
|
|
np->timer.function = &netdev_timer;
|
|
|
|
/* timer handler */
|
|
add_timer(&np->timer);
|
|
|
|
init_timer(&np->reset_timer);
|
|
np->reset_timer.data = (unsigned long) dev;
|
|
np->reset_timer.function = &reset_timer;
|
|
np->reset_timer_armed = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void getlinkstatus(struct net_device *dev)
|
|
/* function: Routine will read MII Status Register to get link status. */
|
|
/* input : dev... pointer to the adapter block. */
|
|
/* output : none. */
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
unsigned int i, DelayTime = 0x1000;
|
|
|
|
np->linkok = 0;
|
|
|
|
if (np->PHYType == MysonPHY) {
|
|
for (i = 0; i < DelayTime; ++i) {
|
|
if (ioread32(np->mem + BMCRSR) & LinkIsUp2) {
|
|
np->linkok = 1;
|
|
return;
|
|
}
|
|
udelay(100);
|
|
}
|
|
} else {
|
|
for (i = 0; i < DelayTime; ++i) {
|
|
if (mdio_read(dev, np->phys[0], MII_BMSR) & BMSR_LSTATUS) {
|
|
np->linkok = 1;
|
|
return;
|
|
}
|
|
udelay(100);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static void getlinktype(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
|
|
if (np->PHYType == MysonPHY) { /* 3-in-1 case */
|
|
if (ioread32(np->mem + TCRRCR) & CR_R_FD)
|
|
np->duplexmode = 2; /* full duplex */
|
|
else
|
|
np->duplexmode = 1; /* half duplex */
|
|
if (ioread32(np->mem + TCRRCR) & CR_R_PS10)
|
|
np->line_speed = 1; /* 10M */
|
|
else
|
|
np->line_speed = 2; /* 100M */
|
|
} else {
|
|
if (np->PHYType == SeeqPHY) { /* this PHY is SEEQ 80225 */
|
|
unsigned int data;
|
|
|
|
data = mdio_read(dev, np->phys[0], MIIRegister18);
|
|
if (data & SPD_DET_100)
|
|
np->line_speed = 2; /* 100M */
|
|
else
|
|
np->line_speed = 1; /* 10M */
|
|
if (data & DPLX_DET_FULL)
|
|
np->duplexmode = 2; /* full duplex mode */
|
|
else
|
|
np->duplexmode = 1; /* half duplex mode */
|
|
} else if (np->PHYType == AhdocPHY) {
|
|
unsigned int data;
|
|
|
|
data = mdio_read(dev, np->phys[0], DiagnosticReg);
|
|
if (data & Speed_100)
|
|
np->line_speed = 2; /* 100M */
|
|
else
|
|
np->line_speed = 1; /* 10M */
|
|
if (data & DPLX_FULL)
|
|
np->duplexmode = 2; /* full duplex mode */
|
|
else
|
|
np->duplexmode = 1; /* half duplex mode */
|
|
}
|
|
/* 89/6/13 add, (begin) */
|
|
else if (np->PHYType == MarvellPHY) {
|
|
unsigned int data;
|
|
|
|
data = mdio_read(dev, np->phys[0], SpecificReg);
|
|
if (data & Full_Duplex)
|
|
np->duplexmode = 2; /* full duplex mode */
|
|
else
|
|
np->duplexmode = 1; /* half duplex mode */
|
|
data &= SpeedMask;
|
|
if (data == Speed_1000M)
|
|
np->line_speed = 3; /* 1000M */
|
|
else if (data == Speed_100M)
|
|
np->line_speed = 2; /* 100M */
|
|
else
|
|
np->line_speed = 1; /* 10M */
|
|
}
|
|
/* 89/6/13 add, (end) */
|
|
/* 89/7/27 add, (begin) */
|
|
else if (np->PHYType == Myson981) {
|
|
unsigned int data;
|
|
|
|
data = mdio_read(dev, np->phys[0], StatusRegister);
|
|
|
|
if (data & SPEED100)
|
|
np->line_speed = 2;
|
|
else
|
|
np->line_speed = 1;
|
|
|
|
if (data & FULLMODE)
|
|
np->duplexmode = 2;
|
|
else
|
|
np->duplexmode = 1;
|
|
}
|
|
/* 89/7/27 add, (end) */
|
|
/* 89/12/29 add */
|
|
else if (np->PHYType == LevelOnePHY) {
|
|
unsigned int data;
|
|
|
|
data = mdio_read(dev, np->phys[0], SpecificReg);
|
|
if (data & LXT1000_Full)
|
|
np->duplexmode = 2; /* full duplex mode */
|
|
else
|
|
np->duplexmode = 1; /* half duplex mode */
|
|
data &= SpeedMask;
|
|
if (data == LXT1000_1000M)
|
|
np->line_speed = 3; /* 1000M */
|
|
else if (data == LXT1000_100M)
|
|
np->line_speed = 2; /* 100M */
|
|
else
|
|
np->line_speed = 1; /* 10M */
|
|
}
|
|
np->crvalue &= (~CR_W_PS10) & (~CR_W_FD) & (~CR_W_PS1000);
|
|
if (np->line_speed == 1)
|
|
np->crvalue |= CR_W_PS10;
|
|
else if (np->line_speed == 3)
|
|
np->crvalue |= CR_W_PS1000;
|
|
if (np->duplexmode == 2)
|
|
np->crvalue |= CR_W_FD;
|
|
}
|
|
}
|
|
|
|
|
|
/* Take lock before calling this */
|
|
static void allocate_rx_buffers(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
|
|
/* allocate skb for rx buffers */
|
|
while (np->really_rx_count != RX_RING_SIZE) {
|
|
struct sk_buff *skb;
|
|
|
|
skb = dev_alloc_skb(np->rx_buf_sz);
|
|
if (skb == NULL)
|
|
break; /* Better luck next round. */
|
|
|
|
while (np->lack_rxbuf->skbuff)
|
|
np->lack_rxbuf = np->lack_rxbuf->next_desc_logical;
|
|
|
|
skb->dev = dev; /* Mark as being used by this device. */
|
|
np->lack_rxbuf->skbuff = skb;
|
|
np->lack_rxbuf->buffer = pci_map_single(np->pci_dev, skb->data,
|
|
np->rx_buf_sz, PCI_DMA_FROMDEVICE);
|
|
np->lack_rxbuf->status = RXOWN;
|
|
++np->really_rx_count;
|
|
}
|
|
}
|
|
|
|
|
|
static void netdev_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *) data;
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->mem;
|
|
int old_crvalue = np->crvalue;
|
|
unsigned int old_linkok = np->linkok;
|
|
unsigned long flags;
|
|
|
|
if (debug)
|
|
printk(KERN_DEBUG "%s: Media selection timer tick, status %8.8x "
|
|
"config %8.8x.\n", dev->name, ioread32(ioaddr + ISR),
|
|
ioread32(ioaddr + TCRRCR));
|
|
|
|
spin_lock_irqsave(&np->lock, flags);
|
|
|
|
if (np->flags == HAS_MII_XCVR) {
|
|
getlinkstatus(dev);
|
|
if ((old_linkok == 0) && (np->linkok == 1)) { /* we need to detect the media type again */
|
|
getlinktype(dev);
|
|
if (np->crvalue != old_crvalue) {
|
|
stop_nic_rxtx(ioaddr, np->crvalue);
|
|
iowrite32(np->crvalue, ioaddr + TCRRCR);
|
|
}
|
|
}
|
|
}
|
|
|
|
allocate_rx_buffers(dev);
|
|
|
|
spin_unlock_irqrestore(&np->lock, flags);
|
|
|
|
np->timer.expires = RUN_AT(10 * HZ);
|
|
add_timer(&np->timer);
|
|
}
|
|
|
|
|
|
/* Take lock before calling */
|
|
/* Reset chip and disable rx, tx and interrupts */
|
|
static void reset_and_disable_rxtx(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->mem;
|
|
int delay=51;
|
|
|
|
/* Reset the chip's Tx and Rx processes. */
|
|
stop_nic_rxtx(ioaddr, 0);
|
|
|
|
/* Disable interrupts by clearing the interrupt mask. */
|
|
iowrite32(0, ioaddr + IMR);
|
|
|
|
/* Reset the chip to erase previous misconfiguration. */
|
|
iowrite32(0x00000001, ioaddr + BCR);
|
|
|
|
/* Ueimor: wait for 50 PCI cycles (and flush posted writes btw).
|
|
We surely wait too long (address+data phase). Who cares? */
|
|
while (--delay) {
|
|
ioread32(ioaddr + BCR);
|
|
rmb();
|
|
}
|
|
}
|
|
|
|
|
|
/* Take lock before calling */
|
|
/* Restore chip after reset */
|
|
static void enable_rxtx(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->mem;
|
|
|
|
reset_rx_descriptors(dev);
|
|
|
|
iowrite32(np->tx_ring_dma + ((char*)np->cur_tx - (char*)np->tx_ring),
|
|
ioaddr + TXLBA);
|
|
iowrite32(np->rx_ring_dma + ((char*)np->cur_rx - (char*)np->rx_ring),
|
|
ioaddr + RXLBA);
|
|
|
|
iowrite32(np->bcrvalue, ioaddr + BCR);
|
|
|
|
iowrite32(0, ioaddr + RXPDR);
|
|
__set_rx_mode(dev); /* changes np->crvalue, writes it into TCRRCR */
|
|
|
|
/* Clear and Enable interrupts by setting the interrupt mask. */
|
|
iowrite32(FBE | TUNF | CNTOVF | RBU | TI | RI, ioaddr + ISR);
|
|
iowrite32(np->imrvalue, ioaddr + IMR);
|
|
|
|
iowrite32(0, ioaddr + TXPDR);
|
|
}
|
|
|
|
|
|
static void reset_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *) data;
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
printk(KERN_WARNING "%s: resetting tx and rx machinery\n", dev->name);
|
|
|
|
spin_lock_irqsave(&np->lock, flags);
|
|
np->crvalue = np->crvalue_sv;
|
|
np->imrvalue = np->imrvalue_sv;
|
|
|
|
reset_and_disable_rxtx(dev);
|
|
/* works for me without this:
|
|
reset_tx_descriptors(dev); */
|
|
enable_rxtx(dev);
|
|
netif_start_queue(dev); /* FIXME: or netif_wake_queue(dev); ? */
|
|
|
|
np->reset_timer_armed = 0;
|
|
|
|
spin_unlock_irqrestore(&np->lock, flags);
|
|
}
|
|
|
|
|
|
static void tx_timeout(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->mem;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
|
|
" resetting...\n", dev->name, ioread32(ioaddr + ISR));
|
|
|
|
{
|
|
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
|
|
for (i = 0; i < RX_RING_SIZE; i++)
|
|
printk(" %8.8x", (unsigned int) np->rx_ring[i].status);
|
|
printk("\n" KERN_DEBUG " Tx ring %p: ", np->tx_ring);
|
|
for (i = 0; i < TX_RING_SIZE; i++)
|
|
printk(" %4.4x", np->tx_ring[i].status);
|
|
printk("\n");
|
|
}
|
|
|
|
spin_lock_irqsave(&np->lock, flags);
|
|
|
|
reset_and_disable_rxtx(dev);
|
|
reset_tx_descriptors(dev);
|
|
enable_rxtx(dev);
|
|
|
|
spin_unlock_irqrestore(&np->lock, flags);
|
|
|
|
dev->trans_start = jiffies;
|
|
np->stats.tx_errors++;
|
|
netif_wake_queue(dev); /* or .._start_.. ?? */
|
|
}
|
|
|
|
|
|
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
|
|
static void init_ring(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int i;
|
|
|
|
/* initialize rx variables */
|
|
np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
|
|
np->cur_rx = &np->rx_ring[0];
|
|
np->lack_rxbuf = np->rx_ring;
|
|
np->really_rx_count = 0;
|
|
|
|
/* initial rx descriptors. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
np->rx_ring[i].status = 0;
|
|
np->rx_ring[i].control = np->rx_buf_sz << RBSShift;
|
|
np->rx_ring[i].next_desc = np->rx_ring_dma +
|
|
(i + 1)*sizeof(struct fealnx_desc);
|
|
np->rx_ring[i].next_desc_logical = &np->rx_ring[i + 1];
|
|
np->rx_ring[i].skbuff = NULL;
|
|
}
|
|
|
|
/* for the last rx descriptor */
|
|
np->rx_ring[i - 1].next_desc = np->rx_ring_dma;
|
|
np->rx_ring[i - 1].next_desc_logical = np->rx_ring;
|
|
|
|
/* allocate skb for rx buffers */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
|
|
|
|
if (skb == NULL) {
|
|
np->lack_rxbuf = &np->rx_ring[i];
|
|
break;
|
|
}
|
|
|
|
++np->really_rx_count;
|
|
np->rx_ring[i].skbuff = skb;
|
|
skb->dev = dev; /* Mark as being used by this device. */
|
|
np->rx_ring[i].buffer = pci_map_single(np->pci_dev, skb->data,
|
|
np->rx_buf_sz, PCI_DMA_FROMDEVICE);
|
|
np->rx_ring[i].status = RXOWN;
|
|
np->rx_ring[i].control |= RXIC;
|
|
}
|
|
|
|
/* initialize tx variables */
|
|
np->cur_tx = &np->tx_ring[0];
|
|
np->cur_tx_copy = &np->tx_ring[0];
|
|
np->really_tx_count = 0;
|
|
np->free_tx_count = TX_RING_SIZE;
|
|
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
np->tx_ring[i].status = 0;
|
|
/* do we need np->tx_ring[i].control = XXX; ?? */
|
|
np->tx_ring[i].next_desc = np->tx_ring_dma +
|
|
(i + 1)*sizeof(struct fealnx_desc);
|
|
np->tx_ring[i].next_desc_logical = &np->tx_ring[i + 1];
|
|
np->tx_ring[i].skbuff = NULL;
|
|
}
|
|
|
|
/* for the last tx descriptor */
|
|
np->tx_ring[i - 1].next_desc = np->tx_ring_dma;
|
|
np->tx_ring[i - 1].next_desc_logical = &np->tx_ring[0];
|
|
}
|
|
|
|
|
|
static int start_tx(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&np->lock, flags);
|
|
|
|
np->cur_tx_copy->skbuff = skb;
|
|
|
|
#define one_buffer
|
|
#define BPT 1022
|
|
#if defined(one_buffer)
|
|
np->cur_tx_copy->buffer = pci_map_single(np->pci_dev, skb->data,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
np->cur_tx_copy->control = TXIC | TXLD | TXFD | CRCEnable | PADEnable;
|
|
np->cur_tx_copy->control |= (skb->len << PKTSShift); /* pkt size */
|
|
np->cur_tx_copy->control |= (skb->len << TBSShift); /* buffer size */
|
|
// 89/12/29 add,
|
|
if (np->pci_dev->device == 0x891)
|
|
np->cur_tx_copy->control |= ETIControl | RetryTxLC;
|
|
np->cur_tx_copy->status = TXOWN;
|
|
np->cur_tx_copy = np->cur_tx_copy->next_desc_logical;
|
|
--np->free_tx_count;
|
|
#elif defined(two_buffer)
|
|
if (skb->len > BPT) {
|
|
struct fealnx_desc *next;
|
|
|
|
/* for the first descriptor */
|
|
np->cur_tx_copy->buffer = pci_map_single(np->pci_dev, skb->data,
|
|
BPT, PCI_DMA_TODEVICE);
|
|
np->cur_tx_copy->control = TXIC | TXFD | CRCEnable | PADEnable;
|
|
np->cur_tx_copy->control |= (skb->len << PKTSShift); /* pkt size */
|
|
np->cur_tx_copy->control |= (BPT << TBSShift); /* buffer size */
|
|
|
|
/* for the last descriptor */
|
|
next = np->cur_tx_copy->next_desc_logical;
|
|
next->skbuff = skb;
|
|
next->control = TXIC | TXLD | CRCEnable | PADEnable;
|
|
next->control |= (skb->len << PKTSShift); /* pkt size */
|
|
next->control |= ((skb->len - BPT) << TBSShift); /* buf size */
|
|
// 89/12/29 add,
|
|
if (np->pci_dev->device == 0x891)
|
|
np->cur_tx_copy->control |= ETIControl | RetryTxLC;
|
|
next->buffer = pci_map_single(ep->pci_dev, skb->data + BPT,
|
|
skb->len - BPT, PCI_DMA_TODEVICE);
|
|
|
|
next->status = TXOWN;
|
|
np->cur_tx_copy->status = TXOWN;
|
|
|
|
np->cur_tx_copy = next->next_desc_logical;
|
|
np->free_tx_count -= 2;
|
|
} else {
|
|
np->cur_tx_copy->buffer = pci_map_single(np->pci_dev, skb->data,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
np->cur_tx_copy->control = TXIC | TXLD | TXFD | CRCEnable | PADEnable;
|
|
np->cur_tx_copy->control |= (skb->len << PKTSShift); /* pkt size */
|
|
np->cur_tx_copy->control |= (skb->len << TBSShift); /* buffer size */
|
|
// 89/12/29 add,
|
|
if (np->pci_dev->device == 0x891)
|
|
np->cur_tx_copy->control |= ETIControl | RetryTxLC;
|
|
np->cur_tx_copy->status = TXOWN;
|
|
np->cur_tx_copy = np->cur_tx_copy->next_desc_logical;
|
|
--np->free_tx_count;
|
|
}
|
|
#endif
|
|
|
|
if (np->free_tx_count < 2)
|
|
netif_stop_queue(dev);
|
|
++np->really_tx_count;
|
|
iowrite32(0, np->mem + TXPDR);
|
|
dev->trans_start = jiffies;
|
|
|
|
spin_unlock_irqrestore(&np->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Take lock before calling */
|
|
/* Chip probably hosed tx ring. Clean up. */
|
|
static void reset_tx_descriptors(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
struct fealnx_desc *cur;
|
|
int i;
|
|
|
|
/* initialize tx variables */
|
|
np->cur_tx = &np->tx_ring[0];
|
|
np->cur_tx_copy = &np->tx_ring[0];
|
|
np->really_tx_count = 0;
|
|
np->free_tx_count = TX_RING_SIZE;
|
|
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
cur = &np->tx_ring[i];
|
|
if (cur->skbuff) {
|
|
pci_unmap_single(np->pci_dev, cur->buffer,
|
|
cur->skbuff->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_any(cur->skbuff);
|
|
cur->skbuff = NULL;
|
|
}
|
|
cur->status = 0;
|
|
cur->control = 0; /* needed? */
|
|
/* probably not needed. We do it for purely paranoid reasons */
|
|
cur->next_desc = np->tx_ring_dma +
|
|
(i + 1)*sizeof(struct fealnx_desc);
|
|
cur->next_desc_logical = &np->tx_ring[i + 1];
|
|
}
|
|
/* for the last tx descriptor */
|
|
np->tx_ring[TX_RING_SIZE - 1].next_desc = np->tx_ring_dma;
|
|
np->tx_ring[TX_RING_SIZE - 1].next_desc_logical = &np->tx_ring[0];
|
|
}
|
|
|
|
|
|
/* Take lock and stop rx before calling this */
|
|
static void reset_rx_descriptors(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
struct fealnx_desc *cur = np->cur_rx;
|
|
int i;
|
|
|
|
allocate_rx_buffers(dev);
|
|
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
if (cur->skbuff)
|
|
cur->status = RXOWN;
|
|
cur = cur->next_desc_logical;
|
|
}
|
|
|
|
iowrite32(np->rx_ring_dma + ((char*)np->cur_rx - (char*)np->rx_ring),
|
|
np->mem + RXLBA);
|
|
}
|
|
|
|
|
|
/* The interrupt handler does all of the Rx thread work and cleans up
|
|
after the Tx thread. */
|
|
static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs)
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_instance;
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->mem;
|
|
long boguscnt = max_interrupt_work;
|
|
unsigned int num_tx = 0;
|
|
int handled = 0;
|
|
|
|
spin_lock(&np->lock);
|
|
|
|
iowrite32(0, ioaddr + IMR);
|
|
|
|
do {
|
|
u32 intr_status = ioread32(ioaddr + ISR);
|
|
|
|
/* Acknowledge all of the current interrupt sources ASAP. */
|
|
iowrite32(intr_status, ioaddr + ISR);
|
|
|
|
if (debug)
|
|
printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", dev->name,
|
|
intr_status);
|
|
|
|
if (!(intr_status & np->imrvalue))
|
|
break;
|
|
|
|
handled = 1;
|
|
|
|
// 90/1/16 delete,
|
|
//
|
|
// if (intr_status & FBE)
|
|
// { /* fatal error */
|
|
// stop_nic_tx(ioaddr, 0);
|
|
// stop_nic_rx(ioaddr, 0);
|
|
// break;
|
|
// };
|
|
|
|
if (intr_status & TUNF)
|
|
iowrite32(0, ioaddr + TXPDR);
|
|
|
|
if (intr_status & CNTOVF) {
|
|
/* missed pkts */
|
|
np->stats.rx_missed_errors += ioread32(ioaddr + TALLY) & 0x7fff;
|
|
|
|
/* crc error */
|
|
np->stats.rx_crc_errors +=
|
|
(ioread32(ioaddr + TALLY) & 0x7fff0000) >> 16;
|
|
}
|
|
|
|
if (intr_status & (RI | RBU)) {
|
|
if (intr_status & RI)
|
|
netdev_rx(dev);
|
|
else {
|
|
stop_nic_rx(ioaddr, np->crvalue);
|
|
reset_rx_descriptors(dev);
|
|
iowrite32(np->crvalue, ioaddr + TCRRCR);
|
|
}
|
|
}
|
|
|
|
while (np->really_tx_count) {
|
|
long tx_status = np->cur_tx->status;
|
|
long tx_control = np->cur_tx->control;
|
|
|
|
if (!(tx_control & TXLD)) { /* this pkt is combined by two tx descriptors */
|
|
struct fealnx_desc *next;
|
|
|
|
next = np->cur_tx->next_desc_logical;
|
|
tx_status = next->status;
|
|
tx_control = next->control;
|
|
}
|
|
|
|
if (tx_status & TXOWN)
|
|
break;
|
|
|
|
if (!(np->crvalue & CR_W_ENH)) {
|
|
if (tx_status & (CSL | LC | EC | UDF | HF)) {
|
|
np->stats.tx_errors++;
|
|
if (tx_status & EC)
|
|
np->stats.tx_aborted_errors++;
|
|
if (tx_status & CSL)
|
|
np->stats.tx_carrier_errors++;
|
|
if (tx_status & LC)
|
|
np->stats.tx_window_errors++;
|
|
if (tx_status & UDF)
|
|
np->stats.tx_fifo_errors++;
|
|
if ((tx_status & HF) && np->mii.full_duplex == 0)
|
|
np->stats.tx_heartbeat_errors++;
|
|
|
|
} else {
|
|
np->stats.tx_bytes +=
|
|
((tx_control & PKTSMask) >> PKTSShift);
|
|
|
|
np->stats.collisions +=
|
|
((tx_status & NCRMask) >> NCRShift);
|
|
np->stats.tx_packets++;
|
|
}
|
|
} else {
|
|
np->stats.tx_bytes +=
|
|
((tx_control & PKTSMask) >> PKTSShift);
|
|
np->stats.tx_packets++;
|
|
}
|
|
|
|
/* Free the original skb. */
|
|
pci_unmap_single(np->pci_dev, np->cur_tx->buffer,
|
|
np->cur_tx->skbuff->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_irq(np->cur_tx->skbuff);
|
|
np->cur_tx->skbuff = NULL;
|
|
--np->really_tx_count;
|
|
if (np->cur_tx->control & TXLD) {
|
|
np->cur_tx = np->cur_tx->next_desc_logical;
|
|
++np->free_tx_count;
|
|
} else {
|
|
np->cur_tx = np->cur_tx->next_desc_logical;
|
|
np->cur_tx = np->cur_tx->next_desc_logical;
|
|
np->free_tx_count += 2;
|
|
}
|
|
num_tx++;
|
|
} /* end of for loop */
|
|
|
|
if (num_tx && np->free_tx_count >= 2)
|
|
netif_wake_queue(dev);
|
|
|
|
/* read transmit status for enhanced mode only */
|
|
if (np->crvalue & CR_W_ENH) {
|
|
long data;
|
|
|
|
data = ioread32(ioaddr + TSR);
|
|
np->stats.tx_errors += (data & 0xff000000) >> 24;
|
|
np->stats.tx_aborted_errors += (data & 0xff000000) >> 24;
|
|
np->stats.tx_window_errors += (data & 0x00ff0000) >> 16;
|
|
np->stats.collisions += (data & 0x0000ffff);
|
|
}
|
|
|
|
if (--boguscnt < 0) {
|
|
printk(KERN_WARNING "%s: Too much work at interrupt, "
|
|
"status=0x%4.4x.\n", dev->name, intr_status);
|
|
if (!np->reset_timer_armed) {
|
|
np->reset_timer_armed = 1;
|
|
np->reset_timer.expires = RUN_AT(HZ/2);
|
|
add_timer(&np->reset_timer);
|
|
stop_nic_rxtx(ioaddr, 0);
|
|
netif_stop_queue(dev);
|
|
/* or netif_tx_disable(dev); ?? */
|
|
/* Prevent other paths from enabling tx,rx,intrs */
|
|
np->crvalue_sv = np->crvalue;
|
|
np->imrvalue_sv = np->imrvalue;
|
|
np->crvalue &= ~(CR_W_TXEN | CR_W_RXEN); /* or simply = 0? */
|
|
np->imrvalue = 0;
|
|
}
|
|
|
|
break;
|
|
}
|
|
} while (1);
|
|
|
|
/* read the tally counters */
|
|
/* missed pkts */
|
|
np->stats.rx_missed_errors += ioread32(ioaddr + TALLY) & 0x7fff;
|
|
|
|
/* crc error */
|
|
np->stats.rx_crc_errors += (ioread32(ioaddr + TALLY) & 0x7fff0000) >> 16;
|
|
|
|
if (debug)
|
|
printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
|
|
dev->name, ioread32(ioaddr + ISR));
|
|
|
|
iowrite32(np->imrvalue, ioaddr + IMR);
|
|
|
|
spin_unlock(&np->lock);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
|
|
/* This routine is logically part of the interrupt handler, but separated
|
|
for clarity and better register allocation. */
|
|
static int netdev_rx(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->mem;
|
|
|
|
/* If EOP is set on the next entry, it's a new packet. Send it up. */
|
|
while (!(np->cur_rx->status & RXOWN) && np->cur_rx->skbuff) {
|
|
s32 rx_status = np->cur_rx->status;
|
|
|
|
if (np->really_rx_count == 0)
|
|
break;
|
|
|
|
if (debug)
|
|
printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", rx_status);
|
|
|
|
if ((!((rx_status & RXFSD) && (rx_status & RXLSD)))
|
|
|| (rx_status & ErrorSummary)) {
|
|
if (rx_status & ErrorSummary) { /* there was a fatal error */
|
|
if (debug)
|
|
printk(KERN_DEBUG
|
|
"%s: Receive error, Rx status %8.8x.\n",
|
|
dev->name, rx_status);
|
|
|
|
np->stats.rx_errors++; /* end of a packet. */
|
|
if (rx_status & (LONG | RUNT))
|
|
np->stats.rx_length_errors++;
|
|
if (rx_status & RXER)
|
|
np->stats.rx_frame_errors++;
|
|
if (rx_status & CRC)
|
|
np->stats.rx_crc_errors++;
|
|
} else {
|
|
int need_to_reset = 0;
|
|
int desno = 0;
|
|
|
|
if (rx_status & RXFSD) { /* this pkt is too long, over one rx buffer */
|
|
struct fealnx_desc *cur;
|
|
|
|
/* check this packet is received completely? */
|
|
cur = np->cur_rx;
|
|
while (desno <= np->really_rx_count) {
|
|
++desno;
|
|
if ((!(cur->status & RXOWN))
|
|
&& (cur->status & RXLSD))
|
|
break;
|
|
/* goto next rx descriptor */
|
|
cur = cur->next_desc_logical;
|
|
}
|
|
if (desno > np->really_rx_count)
|
|
need_to_reset = 1;
|
|
} else /* RXLSD did not find, something error */
|
|
need_to_reset = 1;
|
|
|
|
if (need_to_reset == 0) {
|
|
int i;
|
|
|
|
np->stats.rx_length_errors++;
|
|
|
|
/* free all rx descriptors related this long pkt */
|
|
for (i = 0; i < desno; ++i) {
|
|
if (!np->cur_rx->skbuff) {
|
|
printk(KERN_DEBUG
|
|
"%s: I'm scared\n", dev->name);
|
|
break;
|
|
}
|
|
np->cur_rx->status = RXOWN;
|
|
np->cur_rx = np->cur_rx->next_desc_logical;
|
|
}
|
|
continue;
|
|
} else { /* rx error, need to reset this chip */
|
|
stop_nic_rx(ioaddr, np->crvalue);
|
|
reset_rx_descriptors(dev);
|
|
iowrite32(np->crvalue, ioaddr + TCRRCR);
|
|
}
|
|
break; /* exit the while loop */
|
|
}
|
|
} else { /* this received pkt is ok */
|
|
|
|
struct sk_buff *skb;
|
|
/* Omit the four octet CRC from the length. */
|
|
short pkt_len = ((rx_status & FLNGMASK) >> FLNGShift) - 4;
|
|
|
|
#ifndef final_version
|
|
if (debug)
|
|
printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d"
|
|
" status %x.\n", pkt_len, rx_status);
|
|
#endif
|
|
|
|
/* Check if the packet is long enough to accept without copying
|
|
to a minimally-sized skbuff. */
|
|
if (pkt_len < rx_copybreak &&
|
|
(skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
|
|
skb->dev = dev;
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header */
|
|
pci_dma_sync_single_for_cpu(np->pci_dev,
|
|
np->cur_rx->buffer,
|
|
np->rx_buf_sz,
|
|
PCI_DMA_FROMDEVICE);
|
|
/* Call copy + cksum if available. */
|
|
|
|
#if ! defined(__alpha__)
|
|
eth_copy_and_sum(skb,
|
|
np->cur_rx->skbuff->data, pkt_len, 0);
|
|
skb_put(skb, pkt_len);
|
|
#else
|
|
memcpy(skb_put(skb, pkt_len),
|
|
np->cur_rx->skbuff->data, pkt_len);
|
|
#endif
|
|
pci_dma_sync_single_for_device(np->pci_dev,
|
|
np->cur_rx->buffer,
|
|
np->rx_buf_sz,
|
|
PCI_DMA_FROMDEVICE);
|
|
} else {
|
|
pci_unmap_single(np->pci_dev,
|
|
np->cur_rx->buffer,
|
|
np->rx_buf_sz,
|
|
PCI_DMA_FROMDEVICE);
|
|
skb_put(skb = np->cur_rx->skbuff, pkt_len);
|
|
np->cur_rx->skbuff = NULL;
|
|
--np->really_rx_count;
|
|
}
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
dev->last_rx = jiffies;
|
|
np->stats.rx_packets++;
|
|
np->stats.rx_bytes += pkt_len;
|
|
}
|
|
|
|
np->cur_rx = np->cur_rx->next_desc_logical;
|
|
} /* end of while loop */
|
|
|
|
/* allocate skb for rx buffers */
|
|
allocate_rx_buffers(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct net_device_stats *get_stats(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->mem;
|
|
|
|
/* The chip only need report frame silently dropped. */
|
|
if (netif_running(dev)) {
|
|
np->stats.rx_missed_errors += ioread32(ioaddr + TALLY) & 0x7fff;
|
|
np->stats.rx_crc_errors += (ioread32(ioaddr + TALLY) & 0x7fff0000) >> 16;
|
|
}
|
|
|
|
return &np->stats;
|
|
}
|
|
|
|
|
|
/* for dev->set_multicast_list */
|
|
static void set_rx_mode(struct net_device *dev)
|
|
{
|
|
spinlock_t *lp = &((struct netdev_private *)netdev_priv(dev))->lock;
|
|
unsigned long flags;
|
|
spin_lock_irqsave(lp, flags);
|
|
__set_rx_mode(dev);
|
|
spin_unlock_irqrestore(lp, flags);
|
|
}
|
|
|
|
|
|
/* Take lock before calling */
|
|
static void __set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->mem;
|
|
u32 mc_filter[2]; /* Multicast hash filter */
|
|
u32 rx_mode;
|
|
|
|
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
|
|
/* Unconditionally log net taps. */
|
|
printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name);
|
|
memset(mc_filter, 0xff, sizeof(mc_filter));
|
|
rx_mode = CR_W_PROM | CR_W_AB | CR_W_AM;
|
|
} else if ((dev->mc_count > multicast_filter_limit)
|
|
|| (dev->flags & IFF_ALLMULTI)) {
|
|
/* Too many to match, or accept all multicasts. */
|
|
memset(mc_filter, 0xff, sizeof(mc_filter));
|
|
rx_mode = CR_W_AB | CR_W_AM;
|
|
} else {
|
|
struct dev_mc_list *mclist;
|
|
int i;
|
|
|
|
memset(mc_filter, 0, sizeof(mc_filter));
|
|
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
|
|
i++, mclist = mclist->next) {
|
|
unsigned int bit;
|
|
bit = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F;
|
|
mc_filter[bit >> 5] |= (1 << bit);
|
|
}
|
|
rx_mode = CR_W_AB | CR_W_AM;
|
|
}
|
|
|
|
stop_nic_rxtx(ioaddr, np->crvalue);
|
|
|
|
iowrite32(mc_filter[0], ioaddr + MAR0);
|
|
iowrite32(mc_filter[1], ioaddr + MAR1);
|
|
np->crvalue &= ~CR_W_RXMODEMASK;
|
|
np->crvalue |= rx_mode;
|
|
iowrite32(np->crvalue, ioaddr + TCRRCR);
|
|
}
|
|
|
|
static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
|
|
strcpy(info->driver, DRV_NAME);
|
|
strcpy(info->version, DRV_VERSION);
|
|
strcpy(info->bus_info, pci_name(np->pci_dev));
|
|
}
|
|
|
|
static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int rc;
|
|
|
|
spin_lock_irq(&np->lock);
|
|
rc = mii_ethtool_gset(&np->mii, cmd);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int rc;
|
|
|
|
spin_lock_irq(&np->lock);
|
|
rc = mii_ethtool_sset(&np->mii, cmd);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int netdev_nway_reset(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
return mii_nway_restart(&np->mii);
|
|
}
|
|
|
|
static u32 netdev_get_link(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
return mii_link_ok(&np->mii);
|
|
}
|
|
|
|
static u32 netdev_get_msglevel(struct net_device *dev)
|
|
{
|
|
return debug;
|
|
}
|
|
|
|
static void netdev_set_msglevel(struct net_device *dev, u32 value)
|
|
{
|
|
debug = value;
|
|
}
|
|
|
|
static struct ethtool_ops netdev_ethtool_ops = {
|
|
.get_drvinfo = netdev_get_drvinfo,
|
|
.get_settings = netdev_get_settings,
|
|
.set_settings = netdev_set_settings,
|
|
.nway_reset = netdev_nway_reset,
|
|
.get_link = netdev_get_link,
|
|
.get_msglevel = netdev_get_msglevel,
|
|
.set_msglevel = netdev_set_msglevel,
|
|
.get_sg = ethtool_op_get_sg,
|
|
.get_tx_csum = ethtool_op_get_tx_csum,
|
|
};
|
|
|
|
static int mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int rc;
|
|
|
|
if (!netif_running(dev))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irq(&np->lock);
|
|
rc = generic_mii_ioctl(&np->mii, if_mii(rq), cmd, NULL);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
static int netdev_close(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->mem;
|
|
int i;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* Disable interrupts by clearing the interrupt mask. */
|
|
iowrite32(0x0000, ioaddr + IMR);
|
|
|
|
/* Stop the chip's Tx and Rx processes. */
|
|
stop_nic_rxtx(ioaddr, 0);
|
|
|
|
del_timer_sync(&np->timer);
|
|
del_timer_sync(&np->reset_timer);
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
/* Free all the skbuffs in the Rx queue. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
struct sk_buff *skb = np->rx_ring[i].skbuff;
|
|
|
|
np->rx_ring[i].status = 0;
|
|
if (skb) {
|
|
pci_unmap_single(np->pci_dev, np->rx_ring[i].buffer,
|
|
np->rx_buf_sz, PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(skb);
|
|
np->rx_ring[i].skbuff = NULL;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
struct sk_buff *skb = np->tx_ring[i].skbuff;
|
|
|
|
if (skb) {
|
|
pci_unmap_single(np->pci_dev, np->tx_ring[i].buffer,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb(skb);
|
|
np->tx_ring[i].skbuff = NULL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pci_device_id fealnx_pci_tbl[] = {
|
|
{0x1516, 0x0800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{0x1516, 0x0803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
|
|
{0x1516, 0x0891, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
|
|
{} /* terminate list */
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, fealnx_pci_tbl);
|
|
|
|
|
|
static struct pci_driver fealnx_driver = {
|
|
.name = "fealnx",
|
|
.id_table = fealnx_pci_tbl,
|
|
.probe = fealnx_init_one,
|
|
.remove = __devexit_p(fealnx_remove_one),
|
|
};
|
|
|
|
static int __init fealnx_init(void)
|
|
{
|
|
/* when a module, this is printed whether or not devices are found in probe */
|
|
#ifdef MODULE
|
|
printk(version);
|
|
#endif
|
|
|
|
return pci_module_init(&fealnx_driver);
|
|
}
|
|
|
|
static void __exit fealnx_exit(void)
|
|
{
|
|
pci_unregister_driver(&fealnx_driver);
|
|
}
|
|
|
|
module_init(fealnx_init);
|
|
module_exit(fealnx_exit);
|