mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-01 13:26:45 +07:00
0cd61b68c3
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
607 lines
17 KiB
C
607 lines
17 KiB
C
/*
|
|
* linux/arch/arm/mach-integrator/pci_v3.c
|
|
*
|
|
* PCI functions for V3 host PCI bridge
|
|
*
|
|
* Copyright (C) 1999 ARM Limited
|
|
* Copyright (C) 2000-2001 Deep Blue Solutions Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
#include <asm/mach/pci.h>
|
|
|
|
#include <asm/hardware/pci_v3.h>
|
|
|
|
/*
|
|
* The V3 PCI interface chip in Integrator provides several windows from
|
|
* local bus memory into the PCI memory areas. Unfortunately, there
|
|
* are not really enough windows for our usage, therefore we reuse
|
|
* one of the windows for access to PCI configuration space. The
|
|
* memory map is as follows:
|
|
*
|
|
* Local Bus Memory Usage
|
|
*
|
|
* 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable
|
|
* 50000000 - 5FFFFFFF PCI memory. 256M prefetchable
|
|
* 60000000 - 60FFFFFF PCI IO. 16M
|
|
* 61000000 - 61FFFFFF PCI Configuration. 16M
|
|
*
|
|
* There are three V3 windows, each described by a pair of V3 registers.
|
|
* These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
|
|
* Base0 and Base1 can be used for any type of PCI memory access. Base2
|
|
* can be used either for PCI I/O or for I20 accesses. By default, uHAL
|
|
* uses this only for PCI IO space.
|
|
*
|
|
* Normally these spaces are mapped using the following base registers:
|
|
*
|
|
* Usage Local Bus Memory Base/Map registers used
|
|
*
|
|
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
|
|
* Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1
|
|
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
|
|
* Cfg 61000000 - 61FFFFFF
|
|
*
|
|
* This means that I20 and PCI configuration space accesses will fail.
|
|
* When PCI configuration accesses are needed (via the uHAL PCI
|
|
* configuration space primitives) we must remap the spaces as follows:
|
|
*
|
|
* Usage Local Bus Memory Base/Map registers used
|
|
*
|
|
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
|
|
* Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0
|
|
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
|
|
* Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1
|
|
*
|
|
* To make this work, the code depends on overlapping windows working.
|
|
* The V3 chip translates an address by checking its range within
|
|
* each of the BASE/MAP pairs in turn (in ascending register number
|
|
* order). It will use the first matching pair. So, for example,
|
|
* if the same address is mapped by both LB_BASE0/LB_MAP0 and
|
|
* LB_BASE1/LB_MAP1, the V3 will use the translation from
|
|
* LB_BASE0/LB_MAP0.
|
|
*
|
|
* To allow PCI Configuration space access, the code enlarges the
|
|
* window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes
|
|
* the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
|
|
* be remapped for use by configuration cycles.
|
|
*
|
|
* At the end of the PCI Configuration space accesses,
|
|
* LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window
|
|
* mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
|
|
* reveal the now restored LB_BASE1/LB_MAP1 window.
|
|
*
|
|
* NOTE: We do not set up I2O mapping. I suspect that this is only
|
|
* for an intelligent (target) device. Using I2O disables most of
|
|
* the mappings into PCI memory.
|
|
*/
|
|
|
|
// V3 access routines
|
|
#define v3_writeb(o,v) __raw_writeb(v, PCI_V3_VADDR + (unsigned int)(o))
|
|
#define v3_readb(o) (__raw_readb(PCI_V3_VADDR + (unsigned int)(o)))
|
|
|
|
#define v3_writew(o,v) __raw_writew(v, PCI_V3_VADDR + (unsigned int)(o))
|
|
#define v3_readw(o) (__raw_readw(PCI_V3_VADDR + (unsigned int)(o)))
|
|
|
|
#define v3_writel(o,v) __raw_writel(v, PCI_V3_VADDR + (unsigned int)(o))
|
|
#define v3_readl(o) (__raw_readl(PCI_V3_VADDR + (unsigned int)(o)))
|
|
|
|
/*============================================================================
|
|
*
|
|
* routine: uHALir_PCIMakeConfigAddress()
|
|
*
|
|
* parameters: bus = which bus
|
|
* device = which device
|
|
* function = which function
|
|
* offset = configuration space register we are interested in
|
|
*
|
|
* description: this routine will generate a platform dependent config
|
|
* address.
|
|
*
|
|
* calls: none
|
|
*
|
|
* returns: configuration address to play on the PCI bus
|
|
*
|
|
* To generate the appropriate PCI configuration cycles in the PCI
|
|
* configuration address space, you present the V3 with the following pattern
|
|
* (which is very nearly a type 1 (except that the lower two bits are 00 and
|
|
* not 01). In order for this mapping to work you need to set up one of
|
|
* the local to PCI aperatures to 16Mbytes in length translating to
|
|
* PCI configuration space starting at 0x0000.0000.
|
|
*
|
|
* PCI configuration cycles look like this:
|
|
*
|
|
* Type 0:
|
|
*
|
|
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
|
|
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
|
|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
* | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
|
|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
*
|
|
* 31:11 Device select bit.
|
|
* 10:8 Function number
|
|
* 7:2 Register number
|
|
*
|
|
* Type 1:
|
|
*
|
|
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
|
|
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
|
|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
* | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
|
|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
*
|
|
* 31:24 reserved
|
|
* 23:16 bus number (8 bits = 128 possible buses)
|
|
* 15:11 Device number (5 bits)
|
|
* 10:8 function number
|
|
* 7:2 register number
|
|
*
|
|
*/
|
|
static DEFINE_SPINLOCK(v3_lock);
|
|
|
|
#define PCI_BUS_NONMEM_START 0x00000000
|
|
#define PCI_BUS_NONMEM_SIZE SZ_256M
|
|
|
|
#define PCI_BUS_PREMEM_START PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE
|
|
#define PCI_BUS_PREMEM_SIZE SZ_256M
|
|
|
|
#if PCI_BUS_NONMEM_START & 0x000fffff
|
|
#error PCI_BUS_NONMEM_START must be megabyte aligned
|
|
#endif
|
|
#if PCI_BUS_PREMEM_START & 0x000fffff
|
|
#error PCI_BUS_PREMEM_START must be megabyte aligned
|
|
#endif
|
|
|
|
#undef V3_LB_BASE_PREFETCH
|
|
#define V3_LB_BASE_PREFETCH 0
|
|
|
|
static unsigned long v3_open_config_window(struct pci_bus *bus,
|
|
unsigned int devfn, int offset)
|
|
{
|
|
unsigned int address, mapaddress, busnr;
|
|
|
|
busnr = bus->number;
|
|
|
|
/*
|
|
* Trap out illegal values
|
|
*/
|
|
if (offset > 255)
|
|
BUG();
|
|
if (busnr > 255)
|
|
BUG();
|
|
if (devfn > 255)
|
|
BUG();
|
|
|
|
if (busnr == 0) {
|
|
int slot = PCI_SLOT(devfn);
|
|
|
|
/*
|
|
* local bus segment so need a type 0 config cycle
|
|
*
|
|
* build the PCI configuration "address" with one-hot in
|
|
* A31-A11
|
|
*
|
|
* mapaddress:
|
|
* 3:1 = config cycle (101)
|
|
* 0 = PCI A1 & A0 are 0 (0)
|
|
*/
|
|
address = PCI_FUNC(devfn) << 8;
|
|
mapaddress = V3_LB_MAP_TYPE_CONFIG;
|
|
|
|
if (slot > 12)
|
|
/*
|
|
* high order bits are handled by the MAP register
|
|
*/
|
|
mapaddress |= 1 << (slot - 5);
|
|
else
|
|
/*
|
|
* low order bits handled directly in the address
|
|
*/
|
|
address |= 1 << (slot + 11);
|
|
} else {
|
|
/*
|
|
* not the local bus segment so need a type 1 config cycle
|
|
*
|
|
* address:
|
|
* 23:16 = bus number
|
|
* 15:11 = slot number (7:3 of devfn)
|
|
* 10:8 = func number (2:0 of devfn)
|
|
*
|
|
* mapaddress:
|
|
* 3:1 = config cycle (101)
|
|
* 0 = PCI A1 & A0 from host bus (1)
|
|
*/
|
|
mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
|
|
address = (busnr << 16) | (devfn << 8);
|
|
}
|
|
|
|
/*
|
|
* Set up base0 to see all 512Mbytes of memory space (not
|
|
* prefetchable), this frees up base1 for re-use by
|
|
* configuration memory
|
|
*/
|
|
v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) |
|
|
V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE);
|
|
|
|
/*
|
|
* Set up base1/map1 to point into configuration space.
|
|
*/
|
|
v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_CONFIG_BASE) |
|
|
V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE);
|
|
v3_writew(V3_LB_MAP1, mapaddress);
|
|
|
|
return PCI_CONFIG_VADDR + address + offset;
|
|
}
|
|
|
|
static void v3_close_config_window(void)
|
|
{
|
|
/*
|
|
* Reassign base1 for use by prefetchable PCI memory
|
|
*/
|
|
v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) |
|
|
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
|
|
V3_LB_BASE_ENABLE);
|
|
v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) |
|
|
V3_LB_MAP_TYPE_MEM_MULTIPLE);
|
|
|
|
/*
|
|
* And shrink base0 back to a 256M window (NOTE: MAP0 already correct)
|
|
*/
|
|
v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) |
|
|
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
|
|
}
|
|
|
|
static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
|
|
int size, u32 *val)
|
|
{
|
|
unsigned long addr;
|
|
unsigned long flags;
|
|
u32 v;
|
|
|
|
spin_lock_irqsave(&v3_lock, flags);
|
|
addr = v3_open_config_window(bus, devfn, where);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
v = __raw_readb(addr);
|
|
break;
|
|
|
|
case 2:
|
|
v = __raw_readw(addr);
|
|
break;
|
|
|
|
default:
|
|
v = __raw_readl(addr);
|
|
break;
|
|
}
|
|
|
|
v3_close_config_window();
|
|
spin_unlock_irqrestore(&v3_lock, flags);
|
|
|
|
*val = v;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
|
|
int size, u32 val)
|
|
{
|
|
unsigned long addr;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&v3_lock, flags);
|
|
addr = v3_open_config_window(bus, devfn, where);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
__raw_writeb((u8)val, addr);
|
|
__raw_readb(addr);
|
|
break;
|
|
|
|
case 2:
|
|
__raw_writew((u16)val, addr);
|
|
__raw_readw(addr);
|
|
break;
|
|
|
|
case 4:
|
|
__raw_writel(val, addr);
|
|
__raw_readl(addr);
|
|
break;
|
|
}
|
|
|
|
v3_close_config_window();
|
|
spin_unlock_irqrestore(&v3_lock, flags);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops pci_v3_ops = {
|
|
.read = v3_read_config,
|
|
.write = v3_write_config,
|
|
};
|
|
|
|
static struct resource non_mem = {
|
|
.name = "PCI non-prefetchable",
|
|
.start = PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START,
|
|
.end = PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct resource pre_mem = {
|
|
.name = "PCI prefetchable",
|
|
.start = PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START,
|
|
.end = PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START + PCI_BUS_PREMEM_SIZE - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH,
|
|
};
|
|
|
|
static int __init pci_v3_setup_resources(struct resource **resource)
|
|
{
|
|
if (request_resource(&iomem_resource, &non_mem)) {
|
|
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
|
|
"memory region\n");
|
|
return -EBUSY;
|
|
}
|
|
if (request_resource(&iomem_resource, &pre_mem)) {
|
|
release_resource(&non_mem);
|
|
printk(KERN_ERR "PCI: unable to allocate prefetchable "
|
|
"memory region\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* bus->resource[0] is the IO resource for this bus
|
|
* bus->resource[1] is the mem resource for this bus
|
|
* bus->resource[2] is the prefetch mem resource for this bus
|
|
*/
|
|
resource[0] = &ioport_resource;
|
|
resource[1] = &non_mem;
|
|
resource[2] = &pre_mem;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* These don't seem to be implemented on the Integrator I have, which
|
|
* means I can't get additional information on the reason for the pm2fb
|
|
* problems. I suppose I'll just have to mind-meld with the machine. ;)
|
|
*/
|
|
#define SC_PCI (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_PCIENABLE_OFFSET)
|
|
#define SC_LBFADDR (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x20)
|
|
#define SC_LBFCODE (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x24)
|
|
|
|
static int
|
|
v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
|
|
{
|
|
unsigned long pc = instruction_pointer(regs);
|
|
unsigned long instr = *(unsigned long *)pc;
|
|
#if 0
|
|
char buf[128];
|
|
|
|
sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n",
|
|
addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
|
|
v3_readb(V3_LB_ISTAT));
|
|
printk(KERN_DEBUG "%s", buf);
|
|
printascii(buf);
|
|
#endif
|
|
|
|
v3_writeb(V3_LB_ISTAT, 0);
|
|
__raw_writel(3, SC_PCI);
|
|
|
|
/*
|
|
* If the instruction being executed was a read,
|
|
* make it look like it read all-ones.
|
|
*/
|
|
if ((instr & 0x0c100000) == 0x04100000) {
|
|
int reg = (instr >> 12) & 15;
|
|
unsigned long val;
|
|
|
|
if (instr & 0x00400000)
|
|
val = 255;
|
|
else
|
|
val = -1;
|
|
|
|
regs->uregs[reg] = val;
|
|
regs->ARM_pc += 4;
|
|
return 0;
|
|
}
|
|
|
|
if ((instr & 0x0e100090) == 0x00100090) {
|
|
int reg = (instr >> 12) & 15;
|
|
|
|
regs->uregs[reg] = -1;
|
|
regs->ARM_pc += 4;
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static irqreturn_t v3_irq(int irq, void *devid)
|
|
{
|
|
#ifdef CONFIG_DEBUG_LL
|
|
struct pt_regs *regs = get_irq_regs();
|
|
unsigned long pc = instruction_pointer(regs);
|
|
unsigned long instr = *(unsigned long *)pc;
|
|
char buf[128];
|
|
|
|
sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", irq,
|
|
pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
|
|
v3_readb(V3_LB_ISTAT));
|
|
printascii(buf);
|
|
#endif
|
|
|
|
v3_writew(V3_PCI_STAT, 0xf000);
|
|
v3_writeb(V3_LB_ISTAT, 0);
|
|
__raw_writel(3, SC_PCI);
|
|
|
|
#ifdef CONFIG_DEBUG_LL
|
|
/*
|
|
* If the instruction being executed was a read,
|
|
* make it look like it read all-ones.
|
|
*/
|
|
if ((instr & 0x0c100000) == 0x04100000) {
|
|
int reg = (instr >> 16) & 15;
|
|
sprintf(buf, " reg%d = %08lx\n", reg, regs->uregs[reg]);
|
|
printascii(buf);
|
|
}
|
|
#endif
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (nr == 0) {
|
|
sys->mem_offset = PHYS_PCI_MEM_BASE;
|
|
ret = pci_v3_setup_resources(sys->resource);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
|
|
{
|
|
return pci_scan_bus(sys->busnr, &pci_v3_ops, sys);
|
|
}
|
|
|
|
/*
|
|
* V3_LB_BASE? - local bus address
|
|
* V3_LB_MAP? - pci bus address
|
|
*/
|
|
void __init pci_v3_preinit(void)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int temp;
|
|
int ret;
|
|
|
|
/*
|
|
* Hook in our fault handler for PCI errors
|
|
*/
|
|
hook_fault_code(4, v3_pci_fault, SIGBUS, "external abort on linefetch");
|
|
hook_fault_code(6, v3_pci_fault, SIGBUS, "external abort on linefetch");
|
|
hook_fault_code(8, v3_pci_fault, SIGBUS, "external abort on non-linefetch");
|
|
hook_fault_code(10, v3_pci_fault, SIGBUS, "external abort on non-linefetch");
|
|
|
|
spin_lock_irqsave(&v3_lock, flags);
|
|
|
|
/*
|
|
* Unlock V3 registers, but only if they were previously locked.
|
|
*/
|
|
if (v3_readw(V3_SYSTEM) & V3_SYSTEM_M_LOCK)
|
|
v3_writew(V3_SYSTEM, 0xa05f);
|
|
|
|
/*
|
|
* Setup window 0 - PCI non-prefetchable memory
|
|
* Local: 0x40000000 Bus: 0x00000000 Size: 256MB
|
|
*/
|
|
v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) |
|
|
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
|
|
v3_writew(V3_LB_MAP0, v3_addr_to_lb_map(PCI_BUS_NONMEM_START) |
|
|
V3_LB_MAP_TYPE_MEM);
|
|
|
|
/*
|
|
* Setup window 1 - PCI prefetchable memory
|
|
* Local: 0x50000000 Bus: 0x10000000 Size: 256MB
|
|
*/
|
|
v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) |
|
|
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
|
|
V3_LB_BASE_ENABLE);
|
|
v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) |
|
|
V3_LB_MAP_TYPE_MEM_MULTIPLE);
|
|
|
|
/*
|
|
* Setup window 2 - PCI IO
|
|
*/
|
|
v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(PHYS_PCI_IO_BASE) |
|
|
V3_LB_BASE_ENABLE);
|
|
v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
|
|
|
|
/*
|
|
* Disable PCI to host IO cycles
|
|
*/
|
|
temp = v3_readw(V3_PCI_CFG) & ~V3_PCI_CFG_M_I2O_EN;
|
|
temp |= V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS;
|
|
v3_writew(V3_PCI_CFG, temp);
|
|
|
|
printk(KERN_DEBUG "FIFO_CFG: %04x FIFO_PRIO: %04x\n",
|
|
v3_readw(V3_FIFO_CFG), v3_readw(V3_FIFO_PRIORITY));
|
|
|
|
/*
|
|
* Set the V3 FIFO such that writes have higher priority than
|
|
* reads, and local bus write causes local bus read fifo flush.
|
|
* Same for PCI.
|
|
*/
|
|
v3_writew(V3_FIFO_PRIORITY, 0x0a0a);
|
|
|
|
/*
|
|
* Re-lock the system register.
|
|
*/
|
|
temp = v3_readw(V3_SYSTEM) | V3_SYSTEM_M_LOCK;
|
|
v3_writew(V3_SYSTEM, temp);
|
|
|
|
/*
|
|
* Clear any error conditions, and enable write errors.
|
|
*/
|
|
v3_writeb(V3_LB_ISTAT, 0);
|
|
v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10));
|
|
v3_writeb(V3_LB_IMASK, 0x28);
|
|
__raw_writel(3, SC_PCI);
|
|
|
|
/*
|
|
* Grab the PCI error interrupt.
|
|
*/
|
|
ret = request_irq(IRQ_AP_V3INT, v3_irq, 0, "V3", NULL);
|
|
if (ret)
|
|
printk(KERN_ERR "PCI: unable to grab PCI error "
|
|
"interrupt: %d\n", ret);
|
|
|
|
spin_unlock_irqrestore(&v3_lock, flags);
|
|
}
|
|
|
|
void __init pci_v3_postinit(void)
|
|
{
|
|
unsigned int pci_cmd;
|
|
|
|
pci_cmd = PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
|
|
|
|
v3_writew(V3_PCI_CMD, pci_cmd);
|
|
|
|
v3_writeb(V3_LB_ISTAT, ~0x40);
|
|
v3_writeb(V3_LB_IMASK, 0x68);
|
|
|
|
#if 0
|
|
ret = request_irq(IRQ_AP_LBUSTIMEOUT, lb_timeout, 0, "bus timeout", NULL);
|
|
if (ret)
|
|
printk(KERN_ERR "PCI: unable to grab local bus timeout "
|
|
"interrupt: %d\n", ret);
|
|
#endif
|
|
|
|
register_isa_ports(PHYS_PCI_MEM_BASE, PHYS_PCI_IO_BASE, 0);
|
|
}
|