mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 10:55:15 +07:00
00d8689b85
Originally, the I2C controller supported by the i2c-mv64xxx driver requires a lot of software support: an interrupt is generated at each step of an I2C transaction (after the start bit, after sending the address, etc.) and the driver is in charge of re-programming the I2C controller to do the next step of the I2C transaction. This explains the fairly complex state machine that the driver has. On Marvell Armada XP and later processors (Armada 375, 38x, etc.), the I2C controller was extended with a part called the "I2C Bridge", which allows to offload the I2C transaction completely to the hardware. Initial support for this mechanism was added in commit930ab3d403
("i2c: mv64xxx: Add I2C Transaction Generator support"). However, the implementation done in this commit has two related issues, which this commit fixes by completely changing how the offload implementation is done: * SMBus read transfers, where there is one write to select the register immediately followed in the same transaction by one read, were making the processor hang. This was easier visible on the Marvell Armada XP WRT1900AC platform using a driver for an I2C LED controller, or on other Armada XP platforms by using a simple 'i2cget' command to read an I2C EEPROM. * The implementation was based on the fact that the offload engine was re-programmed to transfer each message of an I2C xfer: this meant that each message sent with the offload engine was starting with a normal I2C start sequence. However, the I2C subsystem assumes that all messages belonging to the same xfer will use the so-called "repeated start" so that the entire I2C xfer is seen as one transfer by the I2C devices and cannot be interrupt by other I2C masters on the same bus. In fact, the "I2C Bridge" allows to offload three types of xfer: - xfer of one write message - xfer of one read message - xfer of one write message followed by one read message For all other situations, we have to fallback to not using the "I2C Bridge" in order to get proper I2C semantics. Therefore, this commit reworks the offload implementation to put it not at the message level, but at the xfer level: in the mv64xxx_i2c_xfer() function, we decide if the transaction can be offloaded (in which case it is handled by the mv64xxx_i2c_offload_xfer() function), or otherwise it is handled by the slow path (implemented in the existing mv64xxx_i2c_execute_msg()). This allows to simplify the state machine, which no longer needs to have any state related to the offload implementation: the offload implementation is now completely separated from the slow path (with the exception of the interrupt handler, of course). In summary: - mv64xxx_i2c_can_offload() will analyze an I2C xfer and decided of the "I2C Bridge" can be used to offload it or not. - mv64xxx_i2c_offload_xfer() will actually program the "I2C Bridge" to offload one xfer (of either one or two messages), and block using mv64xxx_i2c_wait_for_completion() until the xfer completes. - The interrupt handler mv64xxx_i2c_intr() is modified to push the offload related code to a separate function, mv64xxx_i2c_intr_offload(). It will take care of reading the received data if needed. This commit was tested on: - Armada XP OpenBlocks AX3-4 (EEPROM on I2C and RTC on I2C) - Armada XP WRT1900AC (LED controller on I2C) - Armada XP GP (EEPROM on I2C) Fixes:930ab3d403
("i2c: mv64xxx: Add I2C Transaction Generator support") Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> [wsa: fixed checkpatch warnings] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
1004 lines
27 KiB
C
1004 lines
27 KiB
C
/*
|
|
* Driver for the i2c controller on the Marvell line of host bridges
|
|
* (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family).
|
|
*
|
|
* Author: Mark A. Greer <mgreer@mvista.com>
|
|
*
|
|
* 2005 (c) MontaVista, Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mv643xx_i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define MV64XXX_I2C_ADDR_ADDR(val) ((val & 0x7f) << 1)
|
|
#define MV64XXX_I2C_BAUD_DIV_N(val) (val & 0x7)
|
|
#define MV64XXX_I2C_BAUD_DIV_M(val) ((val & 0xf) << 3)
|
|
|
|
#define MV64XXX_I2C_REG_CONTROL_ACK BIT(2)
|
|
#define MV64XXX_I2C_REG_CONTROL_IFLG BIT(3)
|
|
#define MV64XXX_I2C_REG_CONTROL_STOP BIT(4)
|
|
#define MV64XXX_I2C_REG_CONTROL_START BIT(5)
|
|
#define MV64XXX_I2C_REG_CONTROL_TWSIEN BIT(6)
|
|
#define MV64XXX_I2C_REG_CONTROL_INTEN BIT(7)
|
|
|
|
/* Ctlr status values */
|
|
#define MV64XXX_I2C_STATUS_BUS_ERR 0x00
|
|
#define MV64XXX_I2C_STATUS_MAST_START 0x08
|
|
#define MV64XXX_I2C_STATUS_MAST_REPEAT_START 0x10
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK 0x18
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK 0x20
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ACK 0x28
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_NO_ACK 0x30
|
|
#define MV64XXX_I2C_STATUS_MAST_LOST_ARB 0x38
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK 0x40
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK 0x48
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK 0x50
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK 0x58
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK 0xd0
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK 0xd8
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK 0xe0
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8
|
|
#define MV64XXX_I2C_STATUS_NO_STATUS 0xf8
|
|
|
|
/* Register defines (I2C bridge) */
|
|
#define MV64XXX_I2C_REG_TX_DATA_LO 0xc0
|
|
#define MV64XXX_I2C_REG_TX_DATA_HI 0xc4
|
|
#define MV64XXX_I2C_REG_RX_DATA_LO 0xc8
|
|
#define MV64XXX_I2C_REG_RX_DATA_HI 0xcc
|
|
#define MV64XXX_I2C_REG_BRIDGE_CONTROL 0xd0
|
|
#define MV64XXX_I2C_REG_BRIDGE_STATUS 0xd4
|
|
#define MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE 0xd8
|
|
#define MV64XXX_I2C_REG_BRIDGE_INTR_MASK 0xdC
|
|
#define MV64XXX_I2C_REG_BRIDGE_TIMING 0xe0
|
|
|
|
/* Bridge Control values */
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_WR BIT(0)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_RD BIT(1)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT 2
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT BIT(12)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT 13
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT 16
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_ENABLE BIT(19)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_REPEATED_START BIT(20)
|
|
|
|
/* Bridge Status values */
|
|
#define MV64XXX_I2C_BRIDGE_STATUS_ERROR BIT(0)
|
|
|
|
/* Driver states */
|
|
enum {
|
|
MV64XXX_I2C_STATE_INVALID,
|
|
MV64XXX_I2C_STATE_IDLE,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_START_COND,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_RESTART,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA,
|
|
};
|
|
|
|
/* Driver actions */
|
|
enum {
|
|
MV64XXX_I2C_ACTION_INVALID,
|
|
MV64XXX_I2C_ACTION_CONTINUE,
|
|
MV64XXX_I2C_ACTION_SEND_RESTART,
|
|
MV64XXX_I2C_ACTION_SEND_ADDR_1,
|
|
MV64XXX_I2C_ACTION_SEND_ADDR_2,
|
|
MV64XXX_I2C_ACTION_SEND_DATA,
|
|
MV64XXX_I2C_ACTION_RCV_DATA,
|
|
MV64XXX_I2C_ACTION_RCV_DATA_STOP,
|
|
MV64XXX_I2C_ACTION_SEND_STOP,
|
|
};
|
|
|
|
struct mv64xxx_i2c_regs {
|
|
u8 addr;
|
|
u8 ext_addr;
|
|
u8 data;
|
|
u8 control;
|
|
u8 status;
|
|
u8 clock;
|
|
u8 soft_reset;
|
|
};
|
|
|
|
struct mv64xxx_i2c_data {
|
|
struct i2c_msg *msgs;
|
|
int num_msgs;
|
|
int irq;
|
|
u32 state;
|
|
u32 action;
|
|
u32 aborting;
|
|
u32 cntl_bits;
|
|
void __iomem *reg_base;
|
|
struct mv64xxx_i2c_regs reg_offsets;
|
|
u32 addr1;
|
|
u32 addr2;
|
|
u32 bytes_left;
|
|
u32 byte_posn;
|
|
u32 send_stop;
|
|
u32 block;
|
|
int rc;
|
|
u32 freq_m;
|
|
u32 freq_n;
|
|
#if defined(CONFIG_HAVE_CLK)
|
|
struct clk *clk;
|
|
#endif
|
|
wait_queue_head_t waitq;
|
|
spinlock_t lock;
|
|
struct i2c_msg *msg;
|
|
struct i2c_adapter adapter;
|
|
bool offload_enabled;
|
|
/* 5us delay in order to avoid repeated start timing violation */
|
|
bool errata_delay;
|
|
struct reset_control *rstc;
|
|
bool irq_clear_inverted;
|
|
};
|
|
|
|
static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
|
|
.addr = 0x00,
|
|
.ext_addr = 0x10,
|
|
.data = 0x04,
|
|
.control = 0x08,
|
|
.status = 0x0c,
|
|
.clock = 0x0c,
|
|
.soft_reset = 0x1c,
|
|
};
|
|
|
|
static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_sun4i = {
|
|
.addr = 0x00,
|
|
.ext_addr = 0x04,
|
|
.data = 0x08,
|
|
.control = 0x0c,
|
|
.status = 0x10,
|
|
.clock = 0x14,
|
|
.soft_reset = 0x18,
|
|
};
|
|
|
|
static void
|
|
mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
|
|
struct i2c_msg *msg)
|
|
{
|
|
u32 dir = 0;
|
|
|
|
drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
|
|
MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
|
|
|
|
if (msg->flags & I2C_M_RD)
|
|
dir = 1;
|
|
|
|
if (msg->flags & I2C_M_TEN) {
|
|
drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
|
|
drv_data->addr2 = (u32)msg->addr & 0xff;
|
|
} else {
|
|
drv_data->addr1 = MV64XXX_I2C_ADDR_ADDR((u32)msg->addr) | dir;
|
|
drv_data->addr2 = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* Finite State Machine & Interrupt Routines
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
|
|
/* Reset hardware and initialize FSM */
|
|
static void
|
|
mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
if (drv_data->offload_enabled) {
|
|
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
|
|
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_TIMING);
|
|
writel(0, drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
|
|
writel(0, drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_MASK);
|
|
}
|
|
|
|
writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset);
|
|
writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n),
|
|
drv_data->reg_base + drv_data->reg_offsets.clock);
|
|
writel(0, drv_data->reg_base + drv_data->reg_offsets.addr);
|
|
writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr);
|
|
writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
|
|
{
|
|
/*
|
|
* If state is idle, then this is likely the remnants of an old
|
|
* operation that driver has given up on or the user has killed.
|
|
* If so, issue the stop condition and go to idle.
|
|
*/
|
|
if (drv_data->state == MV64XXX_I2C_STATE_IDLE) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
return;
|
|
}
|
|
|
|
/* The status from the ctlr [mostly] tells us what to do next */
|
|
switch (status) {
|
|
/* Start condition interrupt */
|
|
case MV64XXX_I2C_STATUS_MAST_START: /* 0x08 */
|
|
case MV64XXX_I2C_STATUS_MAST_REPEAT_START: /* 0x10 */
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1;
|
|
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
|
|
break;
|
|
|
|
/* Performing a write */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK: /* 0x18 */
|
|
if (drv_data->msg->flags & I2C_M_TEN) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
|
|
break;
|
|
}
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
|
|
if ((drv_data->bytes_left == 0)
|
|
|| (drv_data->aborting
|
|
&& (drv_data->byte_posn != 0))) {
|
|
if (drv_data->send_stop || drv_data->aborting) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
} else {
|
|
drv_data->action =
|
|
MV64XXX_I2C_ACTION_SEND_RESTART;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_RESTART;
|
|
}
|
|
} else {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
|
|
drv_data->bytes_left--;
|
|
}
|
|
break;
|
|
|
|
/* Performing a read */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK: /* 40 */
|
|
if (drv_data->msg->flags & I2C_M_TEN) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
|
|
break;
|
|
}
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
|
|
if (drv_data->bytes_left == 0) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
break;
|
|
}
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
|
|
if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK)
|
|
drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
|
|
else {
|
|
drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA;
|
|
drv_data->bytes_left--;
|
|
}
|
|
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
|
|
|
|
if ((drv_data->bytes_left == 1) || drv_data->aborting)
|
|
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_ACK;
|
|
break;
|
|
|
|
case MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */
|
|
drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
break;
|
|
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_NO_ACK: /* 30 */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */
|
|
/* Doesn't seem to be a device at other end */
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
drv_data->rc = -ENXIO;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, "
|
|
"status: 0x%x, addr: 0x%x, flags: 0x%x\n",
|
|
drv_data->state, status, drv_data->msg->addr,
|
|
drv_data->msg->flags);
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
mv64xxx_i2c_hw_init(drv_data);
|
|
drv_data->rc = -EIO;
|
|
}
|
|
}
|
|
|
|
static void mv64xxx_i2c_send_start(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
drv_data->msg = drv_data->msgs;
|
|
drv_data->byte_posn = 0;
|
|
drv_data->bytes_left = drv_data->msg->len;
|
|
drv_data->aborting = 0;
|
|
drv_data->rc = 0;
|
|
|
|
mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
switch(drv_data->action) {
|
|
case MV64XXX_I2C_ACTION_SEND_RESTART:
|
|
/* We should only get here if we have further messages */
|
|
BUG_ON(drv_data->num_msgs == 0);
|
|
|
|
drv_data->msgs++;
|
|
drv_data->num_msgs--;
|
|
mv64xxx_i2c_send_start(drv_data);
|
|
|
|
if (drv_data->errata_delay)
|
|
udelay(5);
|
|
|
|
/*
|
|
* We're never at the start of the message here, and by this
|
|
* time it's already too late to do any protocol mangling.
|
|
* Thankfully, do not advertise support for that feature.
|
|
*/
|
|
drv_data->send_stop = drv_data->num_msgs == 1;
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_CONTINUE:
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_SEND_ADDR_1:
|
|
writel(drv_data->addr1,
|
|
drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_SEND_ADDR_2:
|
|
writel(drv_data->addr2,
|
|
drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_SEND_DATA:
|
|
writel(drv_data->msg->buf[drv_data->byte_posn++],
|
|
drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_RCV_DATA:
|
|
drv_data->msg->buf[drv_data->byte_posn++] =
|
|
readl(drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_RCV_DATA_STOP:
|
|
drv_data->msg->buf[drv_data->byte_posn++] =
|
|
readl(drv_data->reg_base + drv_data->reg_offsets.data);
|
|
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
drv_data->block = 0;
|
|
if (drv_data->errata_delay)
|
|
udelay(5);
|
|
|
|
wake_up(&drv_data->waitq);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_INVALID:
|
|
default:
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx_i2c_do_action: Invalid action: %d\n",
|
|
drv_data->action);
|
|
drv_data->rc = -EIO;
|
|
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_ACTION_SEND_STOP:
|
|
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
drv_data->block = 0;
|
|
wake_up(&drv_data->waitq);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_read_offload_rx_data(struct mv64xxx_i2c_data *drv_data,
|
|
struct i2c_msg *msg)
|
|
{
|
|
u32 buf[2];
|
|
|
|
buf[0] = readl(drv_data->reg_base + MV64XXX_I2C_REG_RX_DATA_LO);
|
|
buf[1] = readl(drv_data->reg_base + MV64XXX_I2C_REG_RX_DATA_HI);
|
|
|
|
memcpy(msg->buf, buf, msg->len);
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_intr_offload(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
u32 cause, status;
|
|
|
|
cause = readl(drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
|
|
if (!cause)
|
|
return IRQ_NONE;
|
|
|
|
status = readl(drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_STATUS);
|
|
|
|
if (status & MV64XXX_I2C_BRIDGE_STATUS_ERROR) {
|
|
drv_data->rc = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
drv_data->rc = 0;
|
|
|
|
/*
|
|
* Transaction is a one message read transaction, read data
|
|
* for this message.
|
|
*/
|
|
if (drv_data->num_msgs == 1 && drv_data->msgs[0].flags & I2C_M_RD) {
|
|
mv64xxx_i2c_read_offload_rx_data(drv_data, drv_data->msgs);
|
|
drv_data->msgs++;
|
|
drv_data->num_msgs--;
|
|
}
|
|
/*
|
|
* Transaction is a two messages write/read transaction, read
|
|
* data for the second (read) message.
|
|
*/
|
|
else if (drv_data->num_msgs == 2 &&
|
|
!(drv_data->msgs[0].flags & I2C_M_RD) &&
|
|
drv_data->msgs[1].flags & I2C_M_RD) {
|
|
mv64xxx_i2c_read_offload_rx_data(drv_data, drv_data->msgs + 1);
|
|
drv_data->msgs += 2;
|
|
drv_data->num_msgs -= 2;
|
|
}
|
|
|
|
out:
|
|
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
|
|
writel(0, drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
|
|
drv_data->block = 0;
|
|
|
|
wake_up(&drv_data->waitq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t
|
|
mv64xxx_i2c_intr(int irq, void *dev_id)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data = dev_id;
|
|
unsigned long flags;
|
|
u32 status;
|
|
irqreturn_t rc = IRQ_NONE;
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
|
|
if (drv_data->offload_enabled)
|
|
rc = mv64xxx_i2c_intr_offload(drv_data);
|
|
|
|
while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
|
|
MV64XXX_I2C_REG_CONTROL_IFLG) {
|
|
status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
|
|
mv64xxx_i2c_fsm(drv_data, status);
|
|
mv64xxx_i2c_do_action(drv_data);
|
|
|
|
if (drv_data->irq_clear_inverted)
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_IFLG,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
|
|
rc = IRQ_HANDLED;
|
|
}
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* I2C Msg Execution Routines
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static void
|
|
mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
long time_left;
|
|
unsigned long flags;
|
|
char abort = 0;
|
|
|
|
time_left = wait_event_timeout(drv_data->waitq,
|
|
!drv_data->block, drv_data->adapter.timeout);
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
if (!time_left) { /* Timed out */
|
|
drv_data->rc = -ETIMEDOUT;
|
|
abort = 1;
|
|
} else if (time_left < 0) { /* Interrupted/Error */
|
|
drv_data->rc = time_left; /* errno value */
|
|
abort = 1;
|
|
}
|
|
|
|
if (abort && drv_data->block) {
|
|
drv_data->aborting = 1;
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
time_left = wait_event_timeout(drv_data->waitq,
|
|
!drv_data->block, drv_data->adapter.timeout);
|
|
|
|
if ((time_left <= 0) && drv_data->block) {
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx: I2C bus locked, block: %d, "
|
|
"time_left: %d\n", drv_data->block,
|
|
(int)time_left);
|
|
mv64xxx_i2c_hw_init(drv_data);
|
|
}
|
|
} else
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
|
|
int is_last)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
|
|
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
|
|
|
|
drv_data->send_stop = is_last;
|
|
drv_data->block = 1;
|
|
mv64xxx_i2c_send_start(drv_data);
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
mv64xxx_i2c_wait_for_completion(drv_data);
|
|
return drv_data->rc;
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_prepare_tx(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
struct i2c_msg *msg = drv_data->msgs;
|
|
u32 buf[2];
|
|
|
|
memcpy(buf, msg->buf, msg->len);
|
|
|
|
writel(buf[0], drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO);
|
|
writel(buf[1], drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI);
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_offload_xfer(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
struct i2c_msg *msgs = drv_data->msgs;
|
|
int num = drv_data->num_msgs;
|
|
unsigned long ctrl_reg;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
|
|
/* Build transaction */
|
|
ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE |
|
|
(msgs[0].addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT);
|
|
|
|
if (msgs[0].flags & I2C_M_TEN)
|
|
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT;
|
|
|
|
/* Single write message transaction */
|
|
if (num == 1 && !(msgs[0].flags & I2C_M_RD)) {
|
|
size_t len = msgs[0].len - 1;
|
|
|
|
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR |
|
|
(len << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT);
|
|
mv64xxx_i2c_prepare_tx(drv_data);
|
|
}
|
|
/* Single read message transaction */
|
|
else if (num == 1 && msgs[0].flags & I2C_M_RD) {
|
|
size_t len = msgs[0].len - 1;
|
|
|
|
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD |
|
|
(len << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT);
|
|
}
|
|
/*
|
|
* Transaction with one write and one read message. This is
|
|
* guaranteed by the mv64xx_i2c_can_offload() checks.
|
|
*/
|
|
else if (num == 2) {
|
|
size_t lentx = msgs[0].len - 1;
|
|
size_t lenrx = msgs[1].len - 1;
|
|
|
|
ctrl_reg |=
|
|
MV64XXX_I2C_BRIDGE_CONTROL_RD |
|
|
MV64XXX_I2C_BRIDGE_CONTROL_WR |
|
|
(lentx << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT) |
|
|
(lenrx << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT) |
|
|
MV64XXX_I2C_BRIDGE_CONTROL_REPEATED_START;
|
|
mv64xxx_i2c_prepare_tx(drv_data);
|
|
}
|
|
|
|
/* Execute transaction */
|
|
drv_data->block = 1;
|
|
writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
mv64xxx_i2c_wait_for_completion(drv_data);
|
|
|
|
return drv_data->rc;
|
|
}
|
|
|
|
static bool
|
|
mv64xxx_i2c_valid_offload_sz(struct i2c_msg *msg)
|
|
{
|
|
return msg->len <= 8 && msg->len >= 1;
|
|
}
|
|
|
|
static bool
|
|
mv64xxx_i2c_can_offload(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
struct i2c_msg *msgs = drv_data->msgs;
|
|
int num = drv_data->num_msgs;
|
|
|
|
return false;
|
|
|
|
if (!drv_data->offload_enabled)
|
|
return false;
|
|
|
|
/*
|
|
* We can offload a transaction consisting of a single
|
|
* message, as long as the message has a length between 1 and
|
|
* 8 bytes.
|
|
*/
|
|
if (num == 1 && mv64xxx_i2c_valid_offload_sz(msgs))
|
|
return true;
|
|
|
|
/*
|
|
* We can offload a transaction consisting of two messages, if
|
|
* the first is a write and a second is a read, and both have
|
|
* a length between 1 and 8 bytes.
|
|
*/
|
|
if (num == 2 &&
|
|
mv64xxx_i2c_valid_offload_sz(msgs) &&
|
|
mv64xxx_i2c_valid_offload_sz(msgs + 1) &&
|
|
!(msgs[0].flags & I2C_M_RD) &&
|
|
msgs[1].flags & I2C_M_RD)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* I2C Core Support Routines (Interface to higher level I2C code)
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static u32
|
|
mv64xxx_i2c_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
|
|
int rc, ret = num;
|
|
|
|
BUG_ON(drv_data->msgs != NULL);
|
|
drv_data->msgs = msgs;
|
|
drv_data->num_msgs = num;
|
|
|
|
if (mv64xxx_i2c_can_offload(drv_data))
|
|
rc = mv64xxx_i2c_offload_xfer(drv_data);
|
|
else
|
|
rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1);
|
|
|
|
if (rc < 0)
|
|
ret = rc;
|
|
|
|
drv_data->num_msgs = 0;
|
|
drv_data->msgs = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_algorithm mv64xxx_i2c_algo = {
|
|
.master_xfer = mv64xxx_i2c_xfer,
|
|
.functionality = mv64xxx_i2c_functionality,
|
|
};
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* Driver Interface & Early Init Routines
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
|
|
{ .compatible = "allwinner,sun4i-a10-i2c", .data = &mv64xxx_i2c_regs_sun4i},
|
|
{ .compatible = "allwinner,sun6i-a31-i2c", .data = &mv64xxx_i2c_regs_sun4i},
|
|
{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
|
|
{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
|
|
{ .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
|
|
|
|
#ifdef CONFIG_OF
|
|
#ifdef CONFIG_HAVE_CLK
|
|
static int
|
|
mv64xxx_calc_freq(const int tclk, const int n, const int m)
|
|
{
|
|
return tclk / (10 * (m + 1) * (2 << n));
|
|
}
|
|
|
|
static bool
|
|
mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
|
|
u32 *best_m)
|
|
{
|
|
int freq, delta, best_delta = INT_MAX;
|
|
int m, n;
|
|
|
|
for (n = 0; n <= 7; n++)
|
|
for (m = 0; m <= 15; m++) {
|
|
freq = mv64xxx_calc_freq(tclk, n, m);
|
|
delta = req_freq - freq;
|
|
if (delta >= 0 && delta < best_delta) {
|
|
*best_m = m;
|
|
*best_n = n;
|
|
best_delta = delta;
|
|
}
|
|
if (best_delta == 0)
|
|
return true;
|
|
}
|
|
if (best_delta == INT_MAX)
|
|
return false;
|
|
return true;
|
|
}
|
|
#endif /* CONFIG_HAVE_CLK */
|
|
|
|
static int
|
|
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
|
|
struct device *dev)
|
|
{
|
|
/* CLK is mandatory when using DT to describe the i2c bus. We
|
|
* need to know tclk in order to calculate bus clock
|
|
* factors.
|
|
*/
|
|
#if !defined(CONFIG_HAVE_CLK)
|
|
/* Have OF but no CLK */
|
|
return -ENODEV;
|
|
#else
|
|
const struct of_device_id *device;
|
|
struct device_node *np = dev->of_node;
|
|
u32 bus_freq, tclk;
|
|
int rc = 0;
|
|
|
|
if (IS_ERR(drv_data->clk)) {
|
|
rc = -ENODEV;
|
|
goto out;
|
|
}
|
|
tclk = clk_get_rate(drv_data->clk);
|
|
|
|
if (of_property_read_u32(np, "clock-frequency", &bus_freq))
|
|
bus_freq = 100000; /* 100kHz by default */
|
|
|
|
if (!mv64xxx_find_baud_factors(bus_freq, tclk,
|
|
&drv_data->freq_n, &drv_data->freq_m)) {
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
drv_data->irq = irq_of_parse_and_map(np, 0);
|
|
|
|
drv_data->rstc = devm_reset_control_get_optional(dev, NULL);
|
|
if (IS_ERR(drv_data->rstc)) {
|
|
if (PTR_ERR(drv_data->rstc) == -EPROBE_DEFER) {
|
|
rc = -EPROBE_DEFER;
|
|
goto out;
|
|
}
|
|
} else {
|
|
reset_control_deassert(drv_data->rstc);
|
|
}
|
|
|
|
/* Its not yet defined how timeouts will be specified in device tree.
|
|
* So hard code the value to 1 second.
|
|
*/
|
|
drv_data->adapter.timeout = HZ;
|
|
|
|
device = of_match_device(mv64xxx_i2c_of_match_table, dev);
|
|
if (!device)
|
|
return -ENODEV;
|
|
|
|
memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
|
|
|
|
/*
|
|
* For controllers embedded in new SoCs activate the
|
|
* Transaction Generator support and the errata fix.
|
|
*/
|
|
if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
|
|
drv_data->offload_enabled = true;
|
|
drv_data->errata_delay = true;
|
|
}
|
|
|
|
if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
|
|
drv_data->offload_enabled = false;
|
|
drv_data->errata_delay = true;
|
|
}
|
|
|
|
if (of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
|
|
drv_data->irq_clear_inverted = true;
|
|
|
|
out:
|
|
return rc;
|
|
#endif
|
|
}
|
|
#else /* CONFIG_OF */
|
|
static int
|
|
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
|
|
struct device *dev)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static int
|
|
mv64xxx_i2c_probe(struct platform_device *pd)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data;
|
|
struct mv64xxx_i2c_pdata *pdata = dev_get_platdata(&pd->dev);
|
|
struct resource *r;
|
|
int rc;
|
|
|
|
if ((!pdata && !pd->dev.of_node))
|
|
return -ENODEV;
|
|
|
|
drv_data = devm_kzalloc(&pd->dev, sizeof(struct mv64xxx_i2c_data),
|
|
GFP_KERNEL);
|
|
if (!drv_data)
|
|
return -ENOMEM;
|
|
|
|
r = platform_get_resource(pd, IORESOURCE_MEM, 0);
|
|
drv_data->reg_base = devm_ioremap_resource(&pd->dev, r);
|
|
if (IS_ERR(drv_data->reg_base))
|
|
return PTR_ERR(drv_data->reg_base);
|
|
|
|
strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
|
|
sizeof(drv_data->adapter.name));
|
|
|
|
init_waitqueue_head(&drv_data->waitq);
|
|
spin_lock_init(&drv_data->lock);
|
|
|
|
#if defined(CONFIG_HAVE_CLK)
|
|
/* Not all platforms have a clk */
|
|
drv_data->clk = devm_clk_get(&pd->dev, NULL);
|
|
if (!IS_ERR(drv_data->clk)) {
|
|
clk_prepare(drv_data->clk);
|
|
clk_enable(drv_data->clk);
|
|
}
|
|
#endif
|
|
if (pdata) {
|
|
drv_data->freq_m = pdata->freq_m;
|
|
drv_data->freq_n = pdata->freq_n;
|
|
drv_data->irq = platform_get_irq(pd, 0);
|
|
drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
|
|
drv_data->offload_enabled = false;
|
|
memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets));
|
|
} else if (pd->dev.of_node) {
|
|
rc = mv64xxx_of_config(drv_data, &pd->dev);
|
|
if (rc)
|
|
goto exit_clk;
|
|
}
|
|
if (drv_data->irq < 0) {
|
|
rc = -ENXIO;
|
|
goto exit_reset;
|
|
}
|
|
|
|
drv_data->adapter.dev.parent = &pd->dev;
|
|
drv_data->adapter.algo = &mv64xxx_i2c_algo;
|
|
drv_data->adapter.owner = THIS_MODULE;
|
|
drv_data->adapter.class = I2C_CLASS_DEPRECATED;
|
|
drv_data->adapter.nr = pd->id;
|
|
drv_data->adapter.dev.of_node = pd->dev.of_node;
|
|
platform_set_drvdata(pd, drv_data);
|
|
i2c_set_adapdata(&drv_data->adapter, drv_data);
|
|
|
|
mv64xxx_i2c_hw_init(drv_data);
|
|
|
|
rc = request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
|
|
MV64XXX_I2C_CTLR_NAME, drv_data);
|
|
if (rc) {
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx: Can't register intr handler irq%d: %d\n",
|
|
drv_data->irq, rc);
|
|
goto exit_reset;
|
|
} else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
|
|
goto exit_free_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_free_irq:
|
|
free_irq(drv_data->irq, drv_data);
|
|
exit_reset:
|
|
if (!IS_ERR_OR_NULL(drv_data->rstc))
|
|
reset_control_assert(drv_data->rstc);
|
|
exit_clk:
|
|
#if defined(CONFIG_HAVE_CLK)
|
|
/* Not all platforms have a clk */
|
|
if (!IS_ERR(drv_data->clk)) {
|
|
clk_disable(drv_data->clk);
|
|
clk_unprepare(drv_data->clk);
|
|
}
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_remove(struct platform_device *dev)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data = platform_get_drvdata(dev);
|
|
|
|
i2c_del_adapter(&drv_data->adapter);
|
|
free_irq(drv_data->irq, drv_data);
|
|
if (!IS_ERR_OR_NULL(drv_data->rstc))
|
|
reset_control_assert(drv_data->rstc);
|
|
#if defined(CONFIG_HAVE_CLK)
|
|
/* Not all platforms have a clk */
|
|
if (!IS_ERR(drv_data->clk)) {
|
|
clk_disable(drv_data->clk);
|
|
clk_unprepare(drv_data->clk);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mv64xxx_i2c_driver = {
|
|
.probe = mv64xxx_i2c_probe,
|
|
.remove = mv64xxx_i2c_remove,
|
|
.driver = {
|
|
.name = MV64XXX_I2C_CTLR_NAME,
|
|
.of_match_table = mv64xxx_i2c_of_match_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mv64xxx_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
|
|
MODULE_DESCRIPTION("Marvell mv64xxx host bridge i2c ctlr driver");
|
|
MODULE_LICENSE("GPL");
|