linux_dsm_epyc7002/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
Fabrizio Castro 91f5c32dd0 ARM: dts: iwg23s-sbc: Add QSPI flash support
This commit adds QSPI flash support to the iwg23s board specific
device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28 13:55:30 +01:00

180 lines
3.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the iWave-RZ/G1C single board computer
*
* Copyright (C) 2018 Renesas Electronics Corp.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "r8a77470.dtsi"
/ {
model = "iWave iW-RainboW-G23S single board computer based on RZ/G1C";
compatible = "iwave,g23s", "renesas,r8a77470";
aliases {
ethernet0 = &avb;
serial1 = &scif1;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial1:115200n8";
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x20000000>;
};
reg_1p8v: reg-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: reg-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vccq_sdhi2: regulator-vccq-sdhi2 {
compatible = "regulator-gpio";
regulator-name = "SDHI2 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
};
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy3>;
phy-mode = "gmii";
renesas,no-ether-link;
status = "okay";
phy3: ethernet-phy@3 {
reg = <3>;
interrupt-parent = <&gpio5>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
};
};
&cmt0 {
status = "okay";
};
&extal_clk {
clock-frequency = <20000000>;
};
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_gmii_tx_rx";
function = "avb";
};
mmc_pins_uhs: mmc_uhs {
groups = "mmc_data8", "mmc_ctrl";
function = "mmc";
power-source = <1800>;
};
qspi0_pins: qspi0 {
groups = "qspi0_ctrl", "qspi0_data2";
function = "qspi0";
};
scif1_pins: scif1 {
groups = "scif1_data_b";
function = "scif1";
};
sdhi2_pins: sd2 {
groups = "sdhi2_data4", "sdhi2_ctrl";
function = "sdhi2";
power-source = <3300>;
};
sdhi2_pins_uhs: sd2_uhs {
groups = "sdhi2_data4", "sdhi2_ctrl";
function = "sdhi2";
power-source = <1800>;
};
};
&qspi0 {
pinctrl-0 = <&qspi0_pins>;
pinctrl-names = "default";
status = "okay";
/* WARNING - This device contains the bootloader. Handle with care. */
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "issi,is25lp016d", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <133000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
m25p,fast-read;
spi-cpol;
spi-cpha;
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif1 {
pinctrl-0 = <&scif1_pins>;
pinctrl-names = "default";
status = "okay";
};
&sdhi1 {
pinctrl-0 = <&mmc_pins_uhs>;
pinctrl-names = "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
bus-width = <8>;
mmc-hs200-1_8v;
non-removable;
fixed-emmc-driver-type = <1>;
status = "okay";
};
&sdhi2 {
pinctrl-0 = <&sdhi2_pins>;
pinctrl-1 = <&sdhi2_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&vccq_sdhi2>;
bus-width = <4>;
cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
sd-uhs-sdr50;
status = "okay";
};