mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 13:46:39 +07:00
5e7f47e495
This patch adds support for STMicro VL6180 - ALS, range and proximity sensor. Sensor is capable of measuring the light intensity as well as object distance using TOF (Time of Flight) technology. Signed-off-by: Manivannan Sadhasivam <manivannanece23@gmail.com> Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
544 lines
13 KiB
C
544 lines
13 KiB
C
/*
|
|
* vl6180.c - Support for STMicroelectronics VL6180 ALS, range and proximity
|
|
* sensor
|
|
*
|
|
* Copyright 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
|
|
* Copyright 2017 Manivannan Sadhasivam <manivannanece23@gmail.com>
|
|
*
|
|
* This file is subject to the terms and conditions of version 2 of
|
|
* the GNU General Public License. See the file COPYING in the main
|
|
* directory of this archive for more details.
|
|
*
|
|
* IIO driver for VL6180 (7-bit I2C slave address 0x29)
|
|
*
|
|
* Range: 0 to 100mm
|
|
* ALS: < 1 Lux up to 100 kLux
|
|
* IR: 850nm
|
|
*
|
|
* TODO: irq, threshold events, continuous mode, hardware buffer
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define VL6180_DRV_NAME "vl6180"
|
|
|
|
/* Device identification register and value */
|
|
#define VL6180_MODEL_ID 0x000
|
|
#define VL6180_MODEL_ID_VAL 0xb4
|
|
|
|
/* Configuration registers */
|
|
#define VL6180_INTR_CONFIG 0x014
|
|
#define VL6180_INTR_CLEAR 0x015
|
|
#define VL6180_OUT_OF_RESET 0x016
|
|
#define VL6180_HOLD 0x017
|
|
#define VL6180_RANGE_START 0x018
|
|
#define VL6180_ALS_START 0x038
|
|
#define VL6180_ALS_GAIN 0x03f
|
|
#define VL6180_ALS_IT 0x040
|
|
|
|
/* Status registers */
|
|
#define VL6180_RANGE_STATUS 0x04d
|
|
#define VL6180_ALS_STATUS 0x04e
|
|
#define VL6180_INTR_STATUS 0x04f
|
|
|
|
/* Result value registers */
|
|
#define VL6180_ALS_VALUE 0x050
|
|
#define VL6180_RANGE_VALUE 0x062
|
|
#define VL6180_RANGE_RATE 0x066
|
|
|
|
/* bits of the RANGE_START and ALS_START register */
|
|
#define VL6180_MODE_CONT BIT(1) /* continuous mode */
|
|
#define VL6180_STARTSTOP BIT(0) /* start measurement, auto-reset */
|
|
|
|
/* bits of the INTR_STATUS and INTR_CONFIG register */
|
|
#define VL6180_ALS_READY BIT(5)
|
|
#define VL6180_RANGE_READY BIT(2)
|
|
|
|
/* bits of the INTR_CLEAR register */
|
|
#define VL6180_CLEAR_ERROR BIT(2)
|
|
#define VL6180_CLEAR_ALS BIT(1)
|
|
#define VL6180_CLEAR_RANGE BIT(0)
|
|
|
|
/* bits of the HOLD register */
|
|
#define VL6180_HOLD_ON BIT(0)
|
|
|
|
/* default value for the ALS_IT register */
|
|
#define VL6180_ALS_IT_100 0x63 /* 100 ms */
|
|
|
|
/* values for the ALS_GAIN register */
|
|
#define VL6180_ALS_GAIN_1 0x46
|
|
#define VL6180_ALS_GAIN_1_25 0x45
|
|
#define VL6180_ALS_GAIN_1_67 0x44
|
|
#define VL6180_ALS_GAIN_2_5 0x43
|
|
#define VL6180_ALS_GAIN_5 0x42
|
|
#define VL6180_ALS_GAIN_10 0x41
|
|
#define VL6180_ALS_GAIN_20 0x40
|
|
#define VL6180_ALS_GAIN_40 0x47
|
|
|
|
struct vl6180_data {
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
};
|
|
|
|
enum { VL6180_ALS, VL6180_RANGE, VL6180_PROX };
|
|
|
|
/**
|
|
* struct vl6180_chan_regs - Registers for accessing channels
|
|
* @drdy_mask: Data ready bit in status register
|
|
* @start_reg: Conversion start register
|
|
* @value_reg: Result value register
|
|
* @word: Register word length
|
|
*/
|
|
struct vl6180_chan_regs {
|
|
u8 drdy_mask;
|
|
u16 start_reg, value_reg;
|
|
bool word;
|
|
};
|
|
|
|
static const struct vl6180_chan_regs vl6180_chan_regs_table[] = {
|
|
[VL6180_ALS] = {
|
|
.drdy_mask = VL6180_ALS_READY,
|
|
.start_reg = VL6180_ALS_START,
|
|
.value_reg = VL6180_ALS_VALUE,
|
|
.word = true,
|
|
},
|
|
[VL6180_RANGE] = {
|
|
.drdy_mask = VL6180_RANGE_READY,
|
|
.start_reg = VL6180_RANGE_START,
|
|
.value_reg = VL6180_RANGE_VALUE,
|
|
.word = false,
|
|
},
|
|
[VL6180_PROX] = {
|
|
.drdy_mask = VL6180_RANGE_READY,
|
|
.start_reg = VL6180_RANGE_START,
|
|
.value_reg = VL6180_RANGE_RATE,
|
|
.word = true,
|
|
},
|
|
};
|
|
|
|
static int vl6180_read(struct i2c_client *client, u16 cmd, void *databuf,
|
|
u8 len)
|
|
{
|
|
__be16 cmdbuf = cpu_to_be16(cmd);
|
|
struct i2c_msg msgs[2] = {
|
|
{ .addr = client->addr, .len = sizeof(cmdbuf), .buf = (u8 *) &cmdbuf },
|
|
{ .addr = client->addr, .len = len, .buf = databuf,
|
|
.flags = I2C_M_RD } };
|
|
int ret;
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret < 0)
|
|
dev_err(&client->dev, "failed reading register 0x%04x\n", cmd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vl6180_read_byte(struct i2c_client *client, u16 cmd)
|
|
{
|
|
u8 data;
|
|
int ret;
|
|
|
|
ret = vl6180_read(client, cmd, &data, sizeof(data));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return data;
|
|
}
|
|
|
|
static int vl6180_read_word(struct i2c_client *client, u16 cmd)
|
|
{
|
|
__be16 data;
|
|
int ret;
|
|
|
|
ret = vl6180_read(client, cmd, &data, sizeof(data));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return be16_to_cpu(data);
|
|
}
|
|
|
|
static int vl6180_write_byte(struct i2c_client *client, u16 cmd, u8 val)
|
|
{
|
|
u8 buf[3];
|
|
struct i2c_msg msgs[1] = {
|
|
{ .addr = client->addr, .len = sizeof(buf), .buf = (u8 *) &buf } };
|
|
int ret;
|
|
|
|
buf[0] = cmd >> 8;
|
|
buf[1] = cmd & 0xff;
|
|
buf[2] = val;
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "failed writing register 0x%04x\n", cmd);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vl6180_write_word(struct i2c_client *client, u16 cmd, u16 val)
|
|
{
|
|
__be16 buf[2];
|
|
struct i2c_msg msgs[1] = {
|
|
{ .addr = client->addr, .len = sizeof(buf), .buf = (u8 *) &buf } };
|
|
int ret;
|
|
|
|
buf[0] = cpu_to_be16(cmd);
|
|
buf[1] = cpu_to_be16(val);
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "failed writing register 0x%04x\n", cmd);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vl6180_measure(struct vl6180_data *data, int addr)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int tries = 20, ret;
|
|
u16 value;
|
|
|
|
mutex_lock(&data->lock);
|
|
/* Start single shot measurement */
|
|
ret = vl6180_write_byte(client,
|
|
vl6180_chan_regs_table[addr].start_reg, VL6180_STARTSTOP);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
while (tries--) {
|
|
ret = vl6180_read_byte(client, VL6180_INTR_STATUS);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
if (ret & vl6180_chan_regs_table[addr].drdy_mask)
|
|
break;
|
|
msleep(20);
|
|
}
|
|
|
|
if (tries < 0) {
|
|
ret = -EIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Read result value from appropriate registers */
|
|
ret = vl6180_chan_regs_table[addr].word ?
|
|
vl6180_read_word(client, vl6180_chan_regs_table[addr].value_reg) :
|
|
vl6180_read_byte(client, vl6180_chan_regs_table[addr].value_reg);
|
|
if (ret < 0)
|
|
goto fail;
|
|
value = ret;
|
|
|
|
/* Clear the interrupt flag after data read */
|
|
ret = vl6180_write_byte(client, VL6180_INTR_CLEAR,
|
|
VL6180_CLEAR_ERROR | VL6180_CLEAR_ALS | VL6180_CLEAR_RANGE);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
ret = value;
|
|
|
|
fail:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_chan_spec vl6180_channels[] = {
|
|
{
|
|
.type = IIO_LIGHT,
|
|
.address = VL6180_ALS,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_INT_TIME) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_HARDWAREGAIN),
|
|
}, {
|
|
.type = IIO_DISTANCE,
|
|
.address = VL6180_RANGE,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
}, {
|
|
.type = IIO_PROXIMITY,
|
|
.address = VL6180_PROX,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Columns 3 & 4 represent the same value in decimal and hex notations.
|
|
* Kept in order to avoid the datatype conversion while reading the
|
|
* hardware_gain.
|
|
*/
|
|
static const int vl6180_als_gain[8][4] = {
|
|
{ 1, 0, 70, VL6180_ALS_GAIN_1 },
|
|
{ 1, 250000, 69, VL6180_ALS_GAIN_1_25 },
|
|
{ 1, 670000, 68, VL6180_ALS_GAIN_1_67 },
|
|
{ 2, 500000, 67, VL6180_ALS_GAIN_2_5 },
|
|
{ 5, 0, 66, VL6180_ALS_GAIN_5 },
|
|
{ 10, 0, 65, VL6180_ALS_GAIN_10 },
|
|
{ 20, 0, 64, VL6180_ALS_GAIN_20 },
|
|
{ 40, 0, 71, VL6180_ALS_GAIN_40 }
|
|
};
|
|
|
|
static int vl6180_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct vl6180_data *data = iio_priv(indio_dev);
|
|
int ret, i;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = vl6180_measure(data, chan->address);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
ret = vl6180_read_word(data->client, VL6180_ALS_IT);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = 0; /* 1 count = 1ms (0 = 1ms) */
|
|
*val2 = (ret + 1) * 1000; /* convert to seconds */
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_LIGHT:
|
|
*val = 0; /* one ALS count is 0.32 Lux */
|
|
*val2 = 320000;
|
|
break;
|
|
case IIO_DISTANCE:
|
|
*val = 0; /* sensor reports mm, scale to meter */
|
|
*val2 = 1000;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_HARDWAREGAIN:
|
|
ret = vl6180_read_byte(data->client, VL6180_ALS_GAIN);
|
|
if (ret < 0)
|
|
return -EINVAL;
|
|
for (i = 0; i < ARRAY_SIZE(vl6180_als_gain); i++) {
|
|
if (ret == vl6180_als_gain[i][2]) {
|
|
*val = vl6180_als_gain[i][0];
|
|
*val2 = vl6180_als_gain[i][1];
|
|
}
|
|
}
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static IIO_CONST_ATTR(als_gain_available, "1 1.25 1.67 2.5 5 10 20 40");
|
|
|
|
static struct attribute *vl6180_attributes[] = {
|
|
&iio_const_attr_als_gain_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group vl6180_attribute_group = {
|
|
.attrs = vl6180_attributes,
|
|
};
|
|
|
|
/* HOLD is needed before updating any config registers */
|
|
static int vl6180_hold(struct vl6180_data *data, bool hold)
|
|
{
|
|
return vl6180_write_byte(data->client, VL6180_HOLD,
|
|
hold ? VL6180_HOLD_ON : 0);
|
|
}
|
|
|
|
static int vl6180_set_als_gain(struct vl6180_data *data, int val, int val2)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vl6180_als_gain); i++) {
|
|
if (val == vl6180_als_gain[i][0] &&
|
|
val2 == vl6180_als_gain[i][1]) {
|
|
mutex_lock(&data->lock);
|
|
ret = vl6180_hold(data, true);
|
|
if (ret < 0)
|
|
goto fail;
|
|
ret = vl6180_write_byte(data->client, VL6180_ALS_GAIN,
|
|
vl6180_als_gain[i][3]);
|
|
fail:
|
|
vl6180_hold(data, false);
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int vl6180_set_it(struct vl6180_data *data, int val2)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = vl6180_hold(data, true);
|
|
if (ret < 0)
|
|
goto fail;
|
|
ret = vl6180_write_word(data->client, VL6180_ALS_IT,
|
|
(val2 - 500) / 1000); /* write value in ms */
|
|
fail:
|
|
vl6180_hold(data, false);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vl6180_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct vl6180_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
if (val != 0 || val2 < 500 || val2 >= 512500)
|
|
return -EINVAL;
|
|
|
|
return vl6180_set_it(data, val2);
|
|
case IIO_CHAN_INFO_HARDWAREGAIN:
|
|
if (chan->type != IIO_LIGHT)
|
|
return -EINVAL;
|
|
|
|
return vl6180_set_als_gain(data, val, val2);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info vl6180_info = {
|
|
.read_raw = vl6180_read_raw,
|
|
.write_raw = vl6180_write_raw,
|
|
.attrs = &vl6180_attribute_group,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static int vl6180_init(struct vl6180_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int ret;
|
|
|
|
ret = vl6180_read_byte(client, VL6180_MODEL_ID);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret != VL6180_MODEL_ID_VAL) {
|
|
dev_err(&client->dev, "invalid model ID %02x\n", ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = vl6180_hold(data, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = vl6180_read_byte(client, VL6180_OUT_OF_RESET);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Detect false reset condition here. This bit is always set when the
|
|
* system comes out of reset.
|
|
*/
|
|
if (ret != 0x01)
|
|
dev_info(&client->dev, "device is not fresh out of reset\n");
|
|
|
|
/* Enable ALS and Range ready interrupts */
|
|
ret = vl6180_write_byte(client, VL6180_INTR_CONFIG,
|
|
VL6180_ALS_READY | VL6180_RANGE_READY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* ALS integration time: 100ms */
|
|
ret = vl6180_write_word(client, VL6180_ALS_IT, VL6180_ALS_IT_100);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* ALS gain: 1 */
|
|
ret = vl6180_write_byte(client, VL6180_ALS_GAIN, VL6180_ALS_GAIN_1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = vl6180_write_byte(client, VL6180_OUT_OF_RESET, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return vl6180_hold(data, false);
|
|
}
|
|
|
|
static int vl6180_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct vl6180_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
mutex_init(&data->lock);
|
|
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->info = &vl6180_info;
|
|
indio_dev->channels = vl6180_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(vl6180_channels);
|
|
indio_dev->name = VL6180_DRV_NAME;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
ret = vl6180_init(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static const struct of_device_id vl6180_of_match[] = {
|
|
{ .compatible = "st,vl6180", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, vl6180_of_match);
|
|
|
|
static const struct i2c_device_id vl6180_id[] = {
|
|
{ "vl6180", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, vl6180_id);
|
|
|
|
static struct i2c_driver vl6180_driver = {
|
|
.driver = {
|
|
.name = VL6180_DRV_NAME,
|
|
.of_match_table = of_match_ptr(vl6180_of_match),
|
|
},
|
|
.probe = vl6180_probe,
|
|
.id_table = vl6180_id,
|
|
};
|
|
|
|
module_i2c_driver(vl6180_driver);
|
|
|
|
MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>");
|
|
MODULE_AUTHOR("Manivannan Sadhasivam <manivannanece23@gmail.com>");
|
|
MODULE_DESCRIPTION("STMicro VL6180 ALS, range and proximity sensor driver");
|
|
MODULE_LICENSE("GPL");
|