mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-08 09:36:41 +07:00
b1450ae9b6
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
861 lines
20 KiB
C
861 lines
20 KiB
C
/**
|
|
* opt3001.c - Texas Instruments OPT3001 Light Sensor
|
|
*
|
|
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
|
|
*
|
|
* Author: Andreas Dannenberg <dannenberg@ti.com>
|
|
* Based on previous work from: Felipe Balbi <balbi@ti.com>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 of the License
|
|
* as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define OPT3001_RESULT 0x00
|
|
#define OPT3001_CONFIGURATION 0x01
|
|
#define OPT3001_LOW_LIMIT 0x02
|
|
#define OPT3001_HIGH_LIMIT 0x03
|
|
#define OPT3001_MANUFACTURER_ID 0x7e
|
|
#define OPT3001_DEVICE_ID 0x7f
|
|
|
|
#define OPT3001_CONFIGURATION_RN_MASK (0xf << 12)
|
|
#define OPT3001_CONFIGURATION_RN_AUTO (0xc << 12)
|
|
|
|
#define OPT3001_CONFIGURATION_CT BIT(11)
|
|
|
|
#define OPT3001_CONFIGURATION_M_MASK (3 << 9)
|
|
#define OPT3001_CONFIGURATION_M_SHUTDOWN (0 << 9)
|
|
#define OPT3001_CONFIGURATION_M_SINGLE (1 << 9)
|
|
#define OPT3001_CONFIGURATION_M_CONTINUOUS (2 << 9) /* also 3 << 9 */
|
|
|
|
#define OPT3001_CONFIGURATION_OVF BIT(8)
|
|
#define OPT3001_CONFIGURATION_CRF BIT(7)
|
|
#define OPT3001_CONFIGURATION_FH BIT(6)
|
|
#define OPT3001_CONFIGURATION_FL BIT(5)
|
|
#define OPT3001_CONFIGURATION_L BIT(4)
|
|
#define OPT3001_CONFIGURATION_POL BIT(3)
|
|
#define OPT3001_CONFIGURATION_ME BIT(2)
|
|
|
|
#define OPT3001_CONFIGURATION_FC_MASK (3 << 0)
|
|
|
|
/* The end-of-conversion enable is located in the low-limit register */
|
|
#define OPT3001_LOW_LIMIT_EOC_ENABLE 0xc000
|
|
|
|
#define OPT3001_REG_EXPONENT(n) ((n) >> 12)
|
|
#define OPT3001_REG_MANTISSA(n) ((n) & 0xfff)
|
|
|
|
#define OPT3001_INT_TIME_LONG 800000
|
|
#define OPT3001_INT_TIME_SHORT 100000
|
|
|
|
/*
|
|
* Time to wait for conversion result to be ready. The device datasheet
|
|
* sect. 6.5 states results are ready after total integration time plus 3ms.
|
|
* This results in worst-case max values of 113ms or 883ms, respectively.
|
|
* Add some slack to be on the safe side.
|
|
*/
|
|
#define OPT3001_RESULT_READY_SHORT 150
|
|
#define OPT3001_RESULT_READY_LONG 1000
|
|
|
|
struct opt3001 {
|
|
struct i2c_client *client;
|
|
struct device *dev;
|
|
|
|
struct mutex lock;
|
|
bool ok_to_ignore_lock;
|
|
bool result_ready;
|
|
wait_queue_head_t result_ready_queue;
|
|
u16 result;
|
|
|
|
u32 int_time;
|
|
u32 mode;
|
|
|
|
u16 high_thresh_mantissa;
|
|
u16 low_thresh_mantissa;
|
|
|
|
u8 high_thresh_exp;
|
|
u8 low_thresh_exp;
|
|
|
|
bool use_irq;
|
|
};
|
|
|
|
struct opt3001_scale {
|
|
int val;
|
|
int val2;
|
|
};
|
|
|
|
static const struct opt3001_scale opt3001_scales[] = {
|
|
{
|
|
.val = 40,
|
|
.val2 = 950000,
|
|
},
|
|
{
|
|
.val = 81,
|
|
.val2 = 900000,
|
|
},
|
|
{
|
|
.val = 163,
|
|
.val2 = 800000,
|
|
},
|
|
{
|
|
.val = 327,
|
|
.val2 = 600000,
|
|
},
|
|
{
|
|
.val = 655,
|
|
.val2 = 200000,
|
|
},
|
|
{
|
|
.val = 1310,
|
|
.val2 = 400000,
|
|
},
|
|
{
|
|
.val = 2620,
|
|
.val2 = 800000,
|
|
},
|
|
{
|
|
.val = 5241,
|
|
.val2 = 600000,
|
|
},
|
|
{
|
|
.val = 10483,
|
|
.val2 = 200000,
|
|
},
|
|
{
|
|
.val = 20966,
|
|
.val2 = 400000,
|
|
},
|
|
{
|
|
.val = 83865,
|
|
.val2 = 600000,
|
|
},
|
|
};
|
|
|
|
static int opt3001_find_scale(const struct opt3001 *opt, int val,
|
|
int val2, u8 *exponent)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(opt3001_scales); i++) {
|
|
const struct opt3001_scale *scale = &opt3001_scales[i];
|
|
|
|
/*
|
|
* Combine the integer and micro parts for comparison
|
|
* purposes. Use milli lux precision to avoid 32-bit integer
|
|
* overflows.
|
|
*/
|
|
if ((val * 1000 + val2 / 1000) <=
|
|
(scale->val * 1000 + scale->val2 / 1000)) {
|
|
*exponent = i;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void opt3001_to_iio_ret(struct opt3001 *opt, u8 exponent,
|
|
u16 mantissa, int *val, int *val2)
|
|
{
|
|
int lux;
|
|
|
|
lux = 10 * (mantissa << exponent);
|
|
*val = lux / 1000;
|
|
*val2 = (lux - (*val * 1000)) * 1000;
|
|
}
|
|
|
|
static void opt3001_set_mode(struct opt3001 *opt, u16 *reg, u16 mode)
|
|
{
|
|
*reg &= ~OPT3001_CONFIGURATION_M_MASK;
|
|
*reg |= mode;
|
|
opt->mode = mode;
|
|
}
|
|
|
|
static IIO_CONST_ATTR_INT_TIME_AVAIL("0.1 0.8");
|
|
|
|
static struct attribute *opt3001_attributes[] = {
|
|
&iio_const_attr_integration_time_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group opt3001_attribute_group = {
|
|
.attrs = opt3001_attributes,
|
|
};
|
|
|
|
static const struct iio_event_spec opt3001_event_spec[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_RISING,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_ENABLE),
|
|
},
|
|
{
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_FALLING,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_ENABLE),
|
|
},
|
|
};
|
|
|
|
static const struct iio_chan_spec opt3001_channels[] = {
|
|
{
|
|
.type = IIO_LIGHT,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
|
|
BIT(IIO_CHAN_INFO_INT_TIME),
|
|
.event_spec = opt3001_event_spec,
|
|
.num_event_specs = ARRAY_SIZE(opt3001_event_spec),
|
|
},
|
|
IIO_CHAN_SOFT_TIMESTAMP(1),
|
|
};
|
|
|
|
static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
|
|
{
|
|
int ret;
|
|
u16 mantissa;
|
|
u16 reg;
|
|
u8 exponent;
|
|
u16 value;
|
|
long timeout;
|
|
|
|
if (opt->use_irq) {
|
|
/*
|
|
* Enable the end-of-conversion interrupt mechanism. Note that
|
|
* doing so will overwrite the low-level limit value however we
|
|
* will restore this value later on.
|
|
*/
|
|
ret = i2c_smbus_write_word_swapped(opt->client,
|
|
OPT3001_LOW_LIMIT,
|
|
OPT3001_LOW_LIMIT_EOC_ENABLE);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to write register %02x\n",
|
|
OPT3001_LOW_LIMIT);
|
|
return ret;
|
|
}
|
|
|
|
/* Allow IRQ to access the device despite lock being set */
|
|
opt->ok_to_ignore_lock = true;
|
|
}
|
|
|
|
/* Reset data-ready indicator flag */
|
|
opt->result_ready = false;
|
|
|
|
/* Configure for single-conversion mode and start a new conversion */
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
goto err;
|
|
}
|
|
|
|
reg = ret;
|
|
opt3001_set_mode(opt, ®, OPT3001_CONFIGURATION_M_SINGLE);
|
|
|
|
ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_CONFIGURATION,
|
|
reg);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to write register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
goto err;
|
|
}
|
|
|
|
if (opt->use_irq) {
|
|
/* Wait for the IRQ to indicate the conversion is complete */
|
|
ret = wait_event_timeout(opt->result_ready_queue,
|
|
opt->result_ready,
|
|
msecs_to_jiffies(OPT3001_RESULT_READY_LONG));
|
|
} else {
|
|
/* Sleep for result ready time */
|
|
timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ?
|
|
OPT3001_RESULT_READY_SHORT : OPT3001_RESULT_READY_LONG;
|
|
msleep(timeout);
|
|
|
|
/* Check result ready flag */
|
|
ret = i2c_smbus_read_word_swapped(opt->client,
|
|
OPT3001_CONFIGURATION);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
goto err;
|
|
}
|
|
|
|
if (!(ret & OPT3001_CONFIGURATION_CRF)) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
/* Obtain value */
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_RESULT);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_RESULT);
|
|
goto err;
|
|
}
|
|
opt->result = ret;
|
|
opt->result_ready = true;
|
|
}
|
|
|
|
err:
|
|
if (opt->use_irq)
|
|
/* Disallow IRQ to access the device while lock is active */
|
|
opt->ok_to_ignore_lock = false;
|
|
|
|
if (ret == 0)
|
|
return -ETIMEDOUT;
|
|
else if (ret < 0)
|
|
return ret;
|
|
|
|
if (opt->use_irq) {
|
|
/*
|
|
* Disable the end-of-conversion interrupt mechanism by
|
|
* restoring the low-level limit value (clearing
|
|
* OPT3001_LOW_LIMIT_EOC_ENABLE). Note that selectively clearing
|
|
* those enable bits would affect the actual limit value due to
|
|
* bit-overlap and therefore can't be done.
|
|
*/
|
|
value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa;
|
|
ret = i2c_smbus_write_word_swapped(opt->client,
|
|
OPT3001_LOW_LIMIT,
|
|
value);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to write register %02x\n",
|
|
OPT3001_LOW_LIMIT);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
exponent = OPT3001_REG_EXPONENT(opt->result);
|
|
mantissa = OPT3001_REG_MANTISSA(opt->result);
|
|
|
|
opt3001_to_iio_ret(opt, exponent, mantissa, val, val2);
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
|
|
static int opt3001_get_int_time(struct opt3001 *opt, int *val, int *val2)
|
|
{
|
|
*val = 0;
|
|
*val2 = opt->int_time;
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
|
|
static int opt3001_set_int_time(struct opt3001 *opt, int time)
|
|
{
|
|
int ret;
|
|
u16 reg;
|
|
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
return ret;
|
|
}
|
|
|
|
reg = ret;
|
|
|
|
switch (time) {
|
|
case OPT3001_INT_TIME_SHORT:
|
|
reg &= ~OPT3001_CONFIGURATION_CT;
|
|
opt->int_time = OPT3001_INT_TIME_SHORT;
|
|
break;
|
|
case OPT3001_INT_TIME_LONG:
|
|
reg |= OPT3001_CONFIGURATION_CT;
|
|
opt->int_time = OPT3001_INT_TIME_LONG;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return i2c_smbus_write_word_swapped(opt->client, OPT3001_CONFIGURATION,
|
|
reg);
|
|
}
|
|
|
|
static int opt3001_read_raw(struct iio_dev *iio,
|
|
struct iio_chan_spec const *chan, int *val, int *val2,
|
|
long mask)
|
|
{
|
|
struct opt3001 *opt = iio_priv(iio);
|
|
int ret;
|
|
|
|
if (opt->mode == OPT3001_CONFIGURATION_M_CONTINUOUS)
|
|
return -EBUSY;
|
|
|
|
if (chan->type != IIO_LIGHT)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&opt->lock);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_PROCESSED:
|
|
ret = opt3001_get_lux(opt, val, val2);
|
|
break;
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
ret = opt3001_get_int_time(opt, val, val2);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&opt->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int opt3001_write_raw(struct iio_dev *iio,
|
|
struct iio_chan_spec const *chan, int val, int val2,
|
|
long mask)
|
|
{
|
|
struct opt3001 *opt = iio_priv(iio);
|
|
int ret;
|
|
|
|
if (opt->mode == OPT3001_CONFIGURATION_M_CONTINUOUS)
|
|
return -EBUSY;
|
|
|
|
if (chan->type != IIO_LIGHT)
|
|
return -EINVAL;
|
|
|
|
if (mask != IIO_CHAN_INFO_INT_TIME)
|
|
return -EINVAL;
|
|
|
|
if (val != 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&opt->lock);
|
|
ret = opt3001_set_int_time(opt, val2);
|
|
mutex_unlock(&opt->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int opt3001_read_event_value(struct iio_dev *iio,
|
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
|
enum iio_event_direction dir, enum iio_event_info info,
|
|
int *val, int *val2)
|
|
{
|
|
struct opt3001 *opt = iio_priv(iio);
|
|
int ret = IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
mutex_lock(&opt->lock);
|
|
|
|
switch (dir) {
|
|
case IIO_EV_DIR_RISING:
|
|
opt3001_to_iio_ret(opt, opt->high_thresh_exp,
|
|
opt->high_thresh_mantissa, val, val2);
|
|
break;
|
|
case IIO_EV_DIR_FALLING:
|
|
opt3001_to_iio_ret(opt, opt->low_thresh_exp,
|
|
opt->low_thresh_mantissa, val, val2);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&opt->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int opt3001_write_event_value(struct iio_dev *iio,
|
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
|
enum iio_event_direction dir, enum iio_event_info info,
|
|
int val, int val2)
|
|
{
|
|
struct opt3001 *opt = iio_priv(iio);
|
|
int ret;
|
|
|
|
u16 mantissa;
|
|
u16 value;
|
|
u16 reg;
|
|
|
|
u8 exponent;
|
|
|
|
if (val < 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&opt->lock);
|
|
|
|
ret = opt3001_find_scale(opt, val, val2, &exponent);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "can't find scale for %d.%06u\n", val, val2);
|
|
goto err;
|
|
}
|
|
|
|
mantissa = (((val * 1000) + (val2 / 1000)) / 10) >> exponent;
|
|
value = (exponent << 12) | mantissa;
|
|
|
|
switch (dir) {
|
|
case IIO_EV_DIR_RISING:
|
|
reg = OPT3001_HIGH_LIMIT;
|
|
opt->high_thresh_mantissa = mantissa;
|
|
opt->high_thresh_exp = exponent;
|
|
break;
|
|
case IIO_EV_DIR_FALLING:
|
|
reg = OPT3001_LOW_LIMIT;
|
|
opt->low_thresh_mantissa = mantissa;
|
|
opt->low_thresh_exp = exponent;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = i2c_smbus_write_word_swapped(opt->client, reg, value);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to write register %02x\n", reg);
|
|
goto err;
|
|
}
|
|
|
|
err:
|
|
mutex_unlock(&opt->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int opt3001_read_event_config(struct iio_dev *iio,
|
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
|
enum iio_event_direction dir)
|
|
{
|
|
struct opt3001 *opt = iio_priv(iio);
|
|
|
|
return opt->mode == OPT3001_CONFIGURATION_M_CONTINUOUS;
|
|
}
|
|
|
|
static int opt3001_write_event_config(struct iio_dev *iio,
|
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
|
enum iio_event_direction dir, int state)
|
|
{
|
|
struct opt3001 *opt = iio_priv(iio);
|
|
int ret;
|
|
u16 mode;
|
|
u16 reg;
|
|
|
|
if (state && opt->mode == OPT3001_CONFIGURATION_M_CONTINUOUS)
|
|
return 0;
|
|
|
|
if (!state && opt->mode == OPT3001_CONFIGURATION_M_SHUTDOWN)
|
|
return 0;
|
|
|
|
mutex_lock(&opt->lock);
|
|
|
|
mode = state ? OPT3001_CONFIGURATION_M_CONTINUOUS
|
|
: OPT3001_CONFIGURATION_M_SHUTDOWN;
|
|
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
goto err;
|
|
}
|
|
|
|
reg = ret;
|
|
opt3001_set_mode(opt, ®, mode);
|
|
|
|
ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_CONFIGURATION,
|
|
reg);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to write register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
goto err;
|
|
}
|
|
|
|
err:
|
|
mutex_unlock(&opt->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info opt3001_info = {
|
|
.driver_module = THIS_MODULE,
|
|
.attrs = &opt3001_attribute_group,
|
|
.read_raw = opt3001_read_raw,
|
|
.write_raw = opt3001_write_raw,
|
|
.read_event_value = opt3001_read_event_value,
|
|
.write_event_value = opt3001_write_event_value,
|
|
.read_event_config = opt3001_read_event_config,
|
|
.write_event_config = opt3001_write_event_config,
|
|
};
|
|
|
|
static int opt3001_read_id(struct opt3001 *opt)
|
|
{
|
|
char manufacturer[2];
|
|
u16 device_id;
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_MANUFACTURER_ID);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_MANUFACTURER_ID);
|
|
return ret;
|
|
}
|
|
|
|
manufacturer[0] = ret >> 8;
|
|
manufacturer[1] = ret & 0xff;
|
|
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_DEVICE_ID);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_DEVICE_ID);
|
|
return ret;
|
|
}
|
|
|
|
device_id = ret;
|
|
|
|
dev_info(opt->dev, "Found %c%c OPT%04x\n", manufacturer[0],
|
|
manufacturer[1], device_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int opt3001_configure(struct opt3001 *opt)
|
|
{
|
|
int ret;
|
|
u16 reg;
|
|
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
return ret;
|
|
}
|
|
|
|
reg = ret;
|
|
|
|
/* Enable automatic full-scale setting mode */
|
|
reg &= ~OPT3001_CONFIGURATION_RN_MASK;
|
|
reg |= OPT3001_CONFIGURATION_RN_AUTO;
|
|
|
|
/* Reflect status of the device's integration time setting */
|
|
if (reg & OPT3001_CONFIGURATION_CT)
|
|
opt->int_time = OPT3001_INT_TIME_LONG;
|
|
else
|
|
opt->int_time = OPT3001_INT_TIME_SHORT;
|
|
|
|
/* Ensure device is in shutdown initially */
|
|
opt3001_set_mode(opt, ®, OPT3001_CONFIGURATION_M_SHUTDOWN);
|
|
|
|
/* Configure for latched window-style comparison operation */
|
|
reg |= OPT3001_CONFIGURATION_L;
|
|
reg &= ~OPT3001_CONFIGURATION_POL;
|
|
reg &= ~OPT3001_CONFIGURATION_ME;
|
|
reg &= ~OPT3001_CONFIGURATION_FC_MASK;
|
|
|
|
ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_CONFIGURATION,
|
|
reg);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to write register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_LOW_LIMIT);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_LOW_LIMIT);
|
|
return ret;
|
|
}
|
|
|
|
opt->low_thresh_mantissa = OPT3001_REG_MANTISSA(ret);
|
|
opt->low_thresh_exp = OPT3001_REG_EXPONENT(ret);
|
|
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_HIGH_LIMIT);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_HIGH_LIMIT);
|
|
return ret;
|
|
}
|
|
|
|
opt->high_thresh_mantissa = OPT3001_REG_MANTISSA(ret);
|
|
opt->high_thresh_exp = OPT3001_REG_EXPONENT(ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t opt3001_irq(int irq, void *_iio)
|
|
{
|
|
struct iio_dev *iio = _iio;
|
|
struct opt3001 *opt = iio_priv(iio);
|
|
int ret;
|
|
|
|
if (!opt->ok_to_ignore_lock)
|
|
mutex_lock(&opt->lock);
|
|
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
goto out;
|
|
}
|
|
|
|
if ((ret & OPT3001_CONFIGURATION_M_MASK) ==
|
|
OPT3001_CONFIGURATION_M_CONTINUOUS) {
|
|
if (ret & OPT3001_CONFIGURATION_FH)
|
|
iio_push_event(iio,
|
|
IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_RISING),
|
|
iio_get_time_ns(iio));
|
|
if (ret & OPT3001_CONFIGURATION_FL)
|
|
iio_push_event(iio,
|
|
IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_FALLING),
|
|
iio_get_time_ns(iio));
|
|
} else if (ret & OPT3001_CONFIGURATION_CRF) {
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_RESULT);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_RESULT);
|
|
goto out;
|
|
}
|
|
opt->result = ret;
|
|
opt->result_ready = true;
|
|
wake_up(&opt->result_ready_queue);
|
|
}
|
|
|
|
out:
|
|
if (!opt->ok_to_ignore_lock)
|
|
mutex_unlock(&opt->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int opt3001_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
|
|
struct iio_dev *iio;
|
|
struct opt3001 *opt;
|
|
int irq = client->irq;
|
|
int ret;
|
|
|
|
iio = devm_iio_device_alloc(dev, sizeof(*opt));
|
|
if (!iio)
|
|
return -ENOMEM;
|
|
|
|
opt = iio_priv(iio);
|
|
opt->client = client;
|
|
opt->dev = dev;
|
|
|
|
mutex_init(&opt->lock);
|
|
init_waitqueue_head(&opt->result_ready_queue);
|
|
i2c_set_clientdata(client, iio);
|
|
|
|
ret = opt3001_read_id(opt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = opt3001_configure(opt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
iio->name = client->name;
|
|
iio->channels = opt3001_channels;
|
|
iio->num_channels = ARRAY_SIZE(opt3001_channels);
|
|
iio->dev.parent = dev;
|
|
iio->modes = INDIO_DIRECT_MODE;
|
|
iio->info = &opt3001_info;
|
|
|
|
ret = devm_iio_device_register(dev, iio);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register IIO device\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Make use of INT pin only if valid IRQ no. is given */
|
|
if (irq > 0) {
|
|
ret = request_threaded_irq(irq, NULL, opt3001_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
"opt3001", iio);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request IRQ #%d\n", irq);
|
|
return ret;
|
|
}
|
|
opt->use_irq = true;
|
|
} else {
|
|
dev_dbg(opt->dev, "enabling interrupt-less operation\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int opt3001_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *iio = i2c_get_clientdata(client);
|
|
struct opt3001 *opt = iio_priv(iio);
|
|
int ret;
|
|
u16 reg;
|
|
|
|
if (opt->use_irq)
|
|
free_irq(client->irq, iio);
|
|
|
|
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to read register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
return ret;
|
|
}
|
|
|
|
reg = ret;
|
|
opt3001_set_mode(opt, ®, OPT3001_CONFIGURATION_M_SHUTDOWN);
|
|
|
|
ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_CONFIGURATION,
|
|
reg);
|
|
if (ret < 0) {
|
|
dev_err(opt->dev, "failed to write register %02x\n",
|
|
OPT3001_CONFIGURATION);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id opt3001_id[] = {
|
|
{ "opt3001", 0 },
|
|
{ } /* Terminating Entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, opt3001_id);
|
|
|
|
static const struct of_device_id opt3001_of_match[] = {
|
|
{ .compatible = "ti,opt3001" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, opt3001_of_match);
|
|
|
|
static struct i2c_driver opt3001_driver = {
|
|
.probe = opt3001_probe,
|
|
.remove = opt3001_remove,
|
|
.id_table = opt3001_id,
|
|
|
|
.driver = {
|
|
.name = "opt3001",
|
|
.of_match_table = of_match_ptr(opt3001_of_match),
|
|
},
|
|
};
|
|
|
|
module_i2c_driver(opt3001_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Andreas Dannenberg <dannenberg@ti.com>");
|
|
MODULE_DESCRIPTION("Texas Instruments OPT3001 Light Sensor Driver");
|